Lens correction time out bug w7 , solved disabled Desktop Composition

Hi
i 'm running photoshop cs5 under windows 7 ultimate 32bit
every time , i run the lens correction filter i got a time out error
today i tried to run photoshop ,i checked in the compatibility disable desktop composition and the error disapeard
with disable desktop composition do i lose some photoshop feature , colors and so on?
because when i run it now , w7 pop up a warning
thanks

You should normally be able to run Photoshop with Aero enabled. I suspect your video drivers may need updating. What video card/interface do you have, and what version drivers?
Also, how much memory does your video card have on it? You may also find some improvement by altering the Advanced OpenGL Mode in the Edit - Preferences - Performance dialog, e.g., changing from "Normal" to "Basic".
-Noel

Similar Messages

Lens Correction Manual Slider Bug!

Hello,
I've been having a problem with the Lens correction Manual Sliders. Constrain Crop selected.
The vertical and horizontal sliders are behaving more like the distortion slider.
When sliding left or right they are pulling from the center, rather than the right or left end.
Also, with the scale slider....If I scale down it shifts to the right. when I reset all the sliders to zero.
The image doe not reset to its original position.
Is this something that the Lightroom 4 team is aware of?
One all the bugs are fixed I look forward to its release! Your hard work on this software is appreciated!
Best, Pam

The vertical and horizontal sliders are behaving more like the distortion slider.
When sliding left or right they are pulling from the center, rather than the right or left end.
Well, they *are* distortion sliders (sort of), leaving the very center of the photo unchanged. This has not changed from LR3. I can see no bug there. Also keep in mind that the visual effect is very different from wide angle photos to tele photos. Photos made with a tele lens are more or less just changed in the aspect ratio, and not so much distorted like wide angle photos.
Also, with the scale slider....If I scale down it shifts to the right.
This can happen if you used the horizontal slider before, combined with "Constrain Crop" - because the usable part of the photo shifts to one side or another. In the same way, scaling will shift up/down if one used the vertical slider before. This is perfectly normal. Hint: Try the vertical and horizontal sliders independently, with scaling set to 50 (minimum) and "Constrain Crop" *OFF* to see what they do with the photo - that made it a lot clearer to me how they work.
when I reset all the sliders to zero. The image doe not reset to its original position.
Also normal, because if you reset the manual corrections after working with "Constrain Crop" enabled, only the manual corrections themselves are reset, leaving the crop&straighten tool at some "funny" settings. Go to crop&straighten and reset it, too.
In conclusion, I see no bugs here. I also fiddled with the various manual sliders, and could not see any behaviour that was different to LR3, which has no bugs in this respect as far as I know...
P.S. I am not sure if I quoted the last question correctly or not. I assume these two sentences belong together?

Time-out problems with RV320 (after upgrade from RV042)

config:
dual wan
WAN1: 4G router (DHCP) - approx 25Mbit/ 8Mbit
WAN2: PPOE (DSL) - 1 Mbit/ 0.2 Mbit
worked with a RV042 before and upgraded to a RV320 now.
all other things are unchanged.
3 problems - 2 solved/ not critical - one still open:
a) not critical: DHCP Status does not include all devices (changing view - but all-time problem)
I would suspect a software bug.... DHCP itself works perfectly/ IPs are assigned (just not shown in status)
b) solved (at least for now): internet connection featured time-outs; after many tries, disabling the SPI in the firewall helped
btw: this only happend for the WAN1 - WAN2 worked (or is that slow that the additonal wait time did not matter ;-)
c) very annoying: exchange connection (from Outlook client to external exchange) still has time-outs (mostly the whole mail client hangs/ ends to be restarted).
As soon as I disable WAN1, it works! But it´s not the LTE WAN itself - switching back to the RV042 does not show the same symptom.
I tried: include IP into local DNS (in general I work with google DNS servers - but changing that does not help either), opening all traffic for teh realevant IPs and disabling the firewall completely. no positive results....
thanks for any hints....

I agree with you on a, probably a bug of some sort.
b is an issue I've seen before, and even on similar bandwidth (25/5) on my rv016. What was able to figure out is that the carrier (ISP) is sending about 4k/sec of ICMP packets to the router, which in turn makes the router think it's under attack so it drops the connection. As you can tell, disabling the SPI helps. For me, putting another router in front of my rv016 (on 2 of 3 wans) was my only 'permanent' solution.
c sounds like there's a protocol binding/static route in the rv042 that you need to add to the rv320. I'd check that first.
Huntsville's Premiere Car and Bike e-magazine: www.huntsvillecarscene.com

Shockwave Add-on for IE hangs IE and then IE times out.

If Shockewave Add-on for IE is enabled. IE hangs with a Blank page and times out.
If we disable shoackwave add-on everything works fine. This would be fine but shockwave add-on is required for some sites.

vrodrigues-wmc wrote:
Both.
You require both Shockwave Player and Flash Player add-ons? First thing to do is to find out which one is causing the hang.
What is your IE version?

ICloud calendar not syncing in correct time zone

Basically, I live in Australia & I have a subscription to a with all the Manchester United fixtures on in the UK. on my Mac the time zone changes are all correct, but as soon as I view the entries on my iPhone 5, they appear in UK time. I've already set my time zone to Sydney (AEST) on my iCloud account. Not sur

I had the same issue, it annoyed me for quite a while, and I couldn't find a solution on the web. I then looked at "Settings --> Mail, Contacts, Calendars --> Time Zone Support" and saw that it was stuck on the wrong time zone there (which coincided with the time zone my calendar was in). I switched off Time Zone Support and switched it back on: that corrected it. I then returned to my calendar app again, and it was in the correct time zone. That solved it for me.

LR 4.3 lens corrections issue (bug?)

Hello,
I'm having trouble with LR 4.3 lens corrections panel, that I didn't have with LR 4.2.
I'm running LR 64bit on Windows 7 Ultimate. Camera is Pentax K5.
This is what the lens corrections panel looks like after import in LR 4.2. I did setup the "Enable Profile Corrections" as default for my camera, so everytime I import photo's this is autmatically checked.
Opening the same photo in the same catalog with LR 4.3 this is what I get:
Notice "Setup" has changed to "Custom" and Lens Profile says None.
Changing Setup to Default again, Make and Model display the correct information, but Profile says None.
Clicking on the Profile arrows gives me the correct lens profile but...
... selecting that profile turns everything back off and setup is changed to Custom again.
Now setting Setup to Default makes no difference! Lens Profile displays None but...
... selecting Auto gives me the right Make and Model!!
And finally, when I leave the image with settings as here above, go the another photo and change the lens corrections, and then go back to the initial image, everything's gone again!!!
As far as I'm concerned, this is a serious bug, unless I'm missing something obvious.
Did anyone have this same problem?
I've downgraded to LR 4.2 again, and everything is back to normal.
Regards,
Peter

No, that's not it either. Lens Corrections appears in the right panel, between "Detail" and "Effects".
It's just that when I click on the "make" under the Lens profile, all I get is Nikon and Sony (and not the other brands I used to see) and under model there is only one lens if I remember correctly...
This is frustrating, and it will be more so if it turns out that I did something silly!!
thanks
christos

BUG (?): CA correction off after reenabling lens corrections

I would like to inform all about an (in my view) incorrect behaviour of LR:
In order to speed up my workflow i disable detail and lens corrections for all images immediately after the import (select all, auto sync is on, turn off detail and lens corrections). With this panels turned off I can do basic operations like cropping etc much, much quickier. I shoot badminton sport and have to process hundreds of images.
After the basic corrections I reenable detail and lens corrections for all images which should restore the previous settings of this panels or at least the default (ISO specific) settings (which is the same in my case). But the "Remove Chromatic Aberrations" remains off, even if it was on before and on by default for all my lenses! I consider this to be a bug. It isn't a big problem because it can be turned on manually but it can easily be forgotten.

I disable and reenable the panels "Lens Corrections" and "Details" with the switch on the upper left. The tooltip says "Turn off lens corrections".
You can test it with the following steps:
1) Be shure that the panel "Lens Corrections" is enabled and "Enable Profile Corrections" and "Remove Chromatic Aberration" are active for all images.
2) Select 2 or more images and (with "AutoSync" on!) disable the panel "Lens Corrections" (see above).
3) Enable the panel "Lens Corrections" and check the "Remove Chromatic Aberration" option: it is on for the first image, but OFF (!!!) for the second one (and all others if you have selected more).
"Remove Chromatic Aberration" should not be turned off for the other images. Reenabling this panel should just reactivate all previous settings (or the default settings)!!!
FYI: All my default ISO specific camera and lens settings have this options on. Clicking "Reset" activates all this options. So why it gets off disabling and reenabling this panel? I consider this to be a bug.

Lens corrections temporarily disabling other adjustments

I have recently noticed something strange with Lightroom. Normally, I work my way down the Develop module making basic adjustments, using the various tools, and so on; the last thing I do is Upright or Manual lens corrections. However, I apply Lens profiles at the very beginning (because it makes a difference). Recently I noticed that when I apply Upright or Manual Lens corrections, Lightroom seems to temporarily disable any other corrections, apply the lens correction (which always seems to take forever), and reapplies the other corrections. I found this out after noticing minor black and white clipping areas temporarily reappear on a photo I had corrected with an adjustment brush while applying a Manual Lens correction.
I find this behaviour odd and do not know if it has any impact on any other corrections like adjustment brush correction (in this case I started wondering if Lightroom readjusts the adjustment brush area or not).

I have recently noticed something strange with Lightroom. Normally, I work my way down the Develop module making basic adjustments, using the various tools, and so on; the last thing I do is Upright or Manual lens corrections. However, I apply Lens profiles at the very beginning (because it makes a difference). Recently I noticed that when I apply Upright or Manual Lens corrections, Lightroom seems to temporarily disable any other corrections, apply the lens correction (which always seems to take forever), and reapplies the other corrections. I found this out after noticing minor black and white clipping areas temporarily reappear on a photo I had corrected with an adjustment brush while applying a Manual Lens correction.
I find this behaviour odd and do not know if it has any impact on any other corrections like adjustment brush correction (in this case I started wondering if Lightroom readjusts the adjustment brush area or not).

Ipad 2 with version 8.1.3; update to take out bugs etc and now every time I click on an app it asked for my itunes id before I can get it to open; any help would be appreciated

I did the update to take out bugs etc; now when I try to open an app, it asks for my Itunes ID before it will open; this is a pain; has anyone else had this problem or knows how to correct this, assistance gratefully appreciated, thanks

Please tell me that it has NEVER been jailbroke. If it has never been jailbroke, here are some standard repair procedures:
First, try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. It could take well over an hour! Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow the on-screen directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod. As before, say "yes." Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time. If that happens, only the apps that are part of the IOS will appear on your device. Corrective action is simple - choose manual "Sync" from the bottom right of iTunes.
If you're unable to do the Restore (or it doesn't help), go into Recovery Mode per the instructions here. You WILL lose all of your data (game scores, etc,) but, for the most part, you can redownload apps and music without being charged again. Also, read this.

AUR PKGBUILD Source URL times out [SOLVED]

I'm trying to build assogiate 0.2.1
http://aur.archlinux.org/packages.php?ID=9860
The source code is not available. The URL in the PKGBUILD for source times out.....
Connecting to www.kdau.com|216.231.55.137|:80... failed: Connection timed out.
Giving up.
SO.......I tried to use the source from Debian,
http://packages.debian.org/testing/utils/assogiate
http://packages.debian.org/source/squeeze/assogiate
editing the PKGBIULD source URL and md5sum, but now I get:
==> ERROR: One or more files did not pass the validity check!
The Modified PKGBUILD:
#Contributor: jordz ([email protected])
pkgname=assogiate
pkgver=0.2.1
pkgrel=4
pkgdesc="An editor of the MIME file types database for GNOME"
arch=(i686 x86_64)
depends=('glibmm' 'gtkmm' 'gnome-vfsmm' 'libxml++' 'gettext' 'libtool' 'gnome-doc-utils')
makedepends=('pkgconfig')
source=(http://ftp.de.debian.org/debian/pool/main/a/assogiate/assogiate_0.2.1.orig.tar.gz)
md5sums=('a63986ab2c3ea3e1a31f263ca0ff643d')
license=('GPL')
url="http://www.kdau.com/projects/assogiate/"
build()
cd ${srcdir}/$pkgname-$pkgver
./configure --prefix=/usr --disable-scrollkeeper
make || return 1
make DESTDIR=${pkgdir} install
Now what to do next?
Last edited by jeff story (2009-11-29 09:16:45)

==> Finished making: assogiate 0.2.1-4 x86_64 (Sun Nov 29 01:13:59 PST 2009)
SOLVED..........My bad. I didn't save the last edit to the md5sum!!!
Last edited by jeff story (2009-11-29 09:46:55)

Bug report: Screen times out when other side is no...

Bug report: Screen times out when other side is not sharing video. The phone locks and of course the other party cannot see anything. Please fix.
Using WP 8.1.1 Developers Preview.

Hi and welcome to the Skype Community,
Can you please share which platform and which device you are on?
Also are you referring about a one-way video call here where only you are sending video, but the other party doesn't send their video back?
Follow the latest Skype Community News
↓ Did my reply answer your question? Accept it as a solution to help others, Thanks. ↓

I can't download update 5.0.1 and have disabled all security measures and the download still times out shortly after beginning the download. All other downloads are successful so I know the problem is not in the computer. Can anyone help?

Can't download update 5.0.1 to my iPad2. I disabled all security items in fact have deleted them from computer, but the download still times out advising check settings but all is set right? Can any one help with this matter?

I'm still experiencing this problem. I went to settings, general, software and it says Install now. But when I try, I get an error message.

[svn] 2692: Bug: BLZ-227 - When using JMS Destination, MessageClient and FlexClient not released from memory when the session times out .

Revision: 2692
Author: [email protected]
Date: 2008-07-31 13:05:35 -0700 (Thu, 31 Jul 2008)
Log Message:
Bug: BLZ-227 - When using JMS Destination, MessageClient and FlexClient not released from memory when the session times out.
QA: Yes
Doc: No
Checkintests: Pass
Details: Fixed a memory leak with JMS adapter. Also a minor tweak to QA build file to not to start the server if the server is already running.
Ticket Links:
http://bugs.adobe.com/jira/browse/BLZ-227
Modified Paths:
blazeds/branches/3.0.x/modules/core/src/java/flex/messaging/services/messaging/adapters/J MSAdapter.java
blazeds/branches/3.0.x/qa/build.xml

Revision: 2692
Author: [email protected]
Date: 2008-07-31 13:05:35 -0700 (Thu, 31 Jul 2008)
Log Message:
Bug: BLZ-227 - When using JMS Destination, MessageClient and FlexClient not released from memory when the session times out.
QA: Yes
Doc: No
Checkintests: Pass
Details: Fixed a memory leak with JMS adapter. Also a minor tweak to QA build file to not to start the server if the server is already running.
Ticket Links:
http://bugs.adobe.com/jira/browse/BLZ-227
Modified Paths:
blazeds/branches/3.0.x/modules/core/src/java/flex/messaging/services/messaging/adapters/J MSAdapter.java
blazeds/branches/3.0.x/qa/build.xml

Disabling the 10 second time out

Hello there,
I use Ichat often and have had it time out several times when there was no video but audio was present (speaker left the camera view) this is typical and I would like to be able to disable it.
any help is appreciated.
marc

Hi,
I can tell you how iChat gets to Peer-to-Peer Video or Audio Only chat and that may help. AT the end of the day it is a data stream of Video and Audio Data.
Process.
One Buddy sends the Invite to another Buddy and Pop up saying there is an invite appears on the second Buddy's screen. I tend to refer to this as the Visible Invite.
This Visible invite happens on port 5678 using the UDP Protocol (essentially that is just another Internet Protocol like HTML for Web Pages or SMTP for Outgoing mail).
At this point iChat also contacts a server set up by Apple to Help Negotiate the connection with the Buddy.
This Server is called SNATMAP.mac.com and is an SIP server.
SIP = Session Initiation Protocol
This server acts like an old fashioned Telephone Operator at both ends of the connection.
Once that link is made an SIP Invite is sent as well.
It goes from Buddy One to SNATMAP then internally to SNATMAP which then contacts the Buddy (2) and the Buddy's end send a response.
This is on Port 16402 as first choice (in iChat 4 and 5) using the UDP Protocol.
This process continues passing bits back and forth. Like a telephone call but text Based it sends "Trying" then "Ringing" and finally "ACK" (You can sometimes see this in failed Connection Logs).
(Much the same as you would phone he operator and ask them to Connect you, then that Operator contacts one near your Buddy who then ask the Buddy is they will accept)
Then there is further negotiation on what sort of Connection is going to be involved.
(The logs will note a CSeq (Call sequence) change from INVITE to MESSAGE)
AT this point Buddy One's iChat sends a PING to Buddy two's iChat.
This is again on port 16042
This is direct and the return is direct.
This is confirm where the Visible Invite Went to is the same place that is returning the SIP data.
The SNATMAP Server is at the same time confirming with both ends which ports are about to be used for the Video Chat or Audio only chat.
Mac to Mac the first choice is still port 16402 (To PC using AIM the ports can be different but SNAPMAP sorts this).
Following this the SNAPMAP server drops out and the two Buddies are Peer-to-Peer.
If I was trying to place where it in security terms with other Internet Activities I would say it on par with dealing with a Web Browser logging into a Secure site like a Bank, PayPal or the Discussions Login page and similar.
Probably more secure than you email is (Data is not lying about on some server waiting for you to collect it).
Probably more secure than a regular phone call.
If both Buddies have MobileMe accounts and are on Macs then iChat to iChat Chats of any sort can be Encrypted.
Unlike a Chatroom a Buddy cannot join it by knowing that the Chat is taking place (Although the Buddy List does indicate they are busy)
8:08 PM Monday; January 31, 2011
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"

E75 How to disable power save or light time out?

Hi,
I want to disbale either the power save or change the light time out setting, but I can do neither? Can anyone assist?
Thanks

for changing the light settings go to menu->ctrl.panel->settings->general->personlization->display-> there u have light time out option change it with ur desire output..
for disabling the power saver got to menu->ctrl.panel->settings->general->personlization->themes->power saver and just change it to none. and u r done.
¨Arm yourself because no one else here will save you¨

Lens correction time out bug w7 , solved disabled Desktop Composition

Similar Messages

Maybe you are looking for