Lens correction won't automatically detect lens and correct

I'm having a fun time with the lens correction feature in LR 3.2, but it will not auto detect the lens. I have all profiles loaded, I checked. I convert all photos to .dng from the .nef format. (Nikon shooter) When I enable the profile corrections button the setup changes to custom and the lens profile "maker" drop down says none??? and on the bottom it reads "Unable to locate a matching profile automatically." If I change the Make to Tamron by manually selecting it, for example, it finds the profile and all is well. How in the heck do I set it up so the profile connection is enabled automatically and the right lens pops up without intervention?? Hope someone can help with this...I'm working through 500 down selects and this would be nice to fix this issue.
I can see all the lens info in the metadata on the normal library screen????.
Thanks so much for your help in advance!

So you have Tamron lenses...
Here's a quote from a post by Eric Chan (one of LR/ACR developers):
Re: the Sigma 10-20 question. Regrettably, we cannot always automatically determine with 100% certainty the identity of the lens used to shoot the image. We try to be conservative. So if in doubt, we don't choose one automatically. For some third party lenses, this can happen. Choosing Sigma from the Make popup is the right thing to do in this case.
Still, you can try the following trick:
Choose an image shot with a Tamron lens.
Go to lens correction. (The Lens profile auto-detection is supposed to be failed at the moment.)
Choose Tamron and the desired profile from the lists.
Drop down the Setup list and choose "Save New Lens Profile Defaults".
This should rememeber the lens setup (i.e. slider values and lens profile) for the given camera/lens combination.
You can also use a develop preset to apply a lens correction quickly.

Similar Messages

IE Automatically detect setting GPO

Hi all,
I would like to deploy a gpo to enable (automatically detect setting and use automatic configuration script) on client computer, after depoloyment only (use automatic configuration script) can be enable on window xp computer even I have enable both setting on the gpo.
I have tried to create and test separate on a window 7 computer, it is works.
Do anyone have idea??
Many Thanks!!

Perhaps this issue with IE GPOs.........
http://www.novell.com/support/viewCo...rnalId=7008026
On 8/25/2011 1:06 AM, manng228 wrote:
>
> Hi all,
>
> I would like to deploy a gpo to enable (automatically detect setting
> and use automatic configuration script) on client computer, after
> depoloyment only (use automatic configuration script) can be enable on
> window xp computer even I have enable both setting on the gpo.
>
> I have tried to create and test separate on a window 7 computer, it is
> works.
>
> Do anyone have idea??
>
> Many Thanks!!
>
>
Craig Wilson - MCNE, MCSE, CCNA
Novell Knowledge Partner
Novell does not officially monitor these forums.
Suggestions/Opinions/Statements made by me are solely my own.
These thoughts may not be shared by either Novell or any rational human.

Is there a tool for Lightroom to apply lens and camera corrections as easily as with DxO?

DxO is great, but there is something unfixably wrong in the combination of DxO and Photoshop since i installed the plugin, which is jamming Photoshop or Windows. I got my money back, but the tools in Lightroom and Photoshop are not so good and fast as in DxO. Am i maybe missing some great plugin, or some automatic lens correction function?
Thanks!

LR has lens profiles and automatic CA removal, and you can choose to enable them by default, if you wish.

Lightroom not reading correct data for Lens and Camera Serial Number

Hi you all.
Recently got Lightroom, and I'm so impressed - I never imagined image organizing and adjustment could be this easy and at the same time very advanced.
I have a problem, however. Lightroom (and Adobe Bridge, too) does not correctly read the EXIF data of Lens type and Camera Serial Number.
The first ~50 images I took and imported turned out correctly and displayed my serial number and lens (18-55 mm Canon) inside Lightroom.
But now, whenever I import photos into Lightroom or view them with Bridge, they all display "Unknown Lens" and "Unknown Camera Serial Number".
At first I thought that maybe the camera didn't correctly record this data on to the photos anymore for some reason, but a comparison using EXIFToolGUI shows that the metadata is EXACTLY the same as in the photos that display this info in Lightroom correctly.
I have not done any changes to either my camera (Canon EOS-350D / Digitial Rebel XT) or lens (the kit lens, 18-55 mm Canon).
It seems that for some reason, Lightroom has stopped reading these two fields of metadata - all the other fields, such as aperture and shutter speed, all display correctly.
I also tried to reimport the photos into Lightroom, but it didn't help. Neither did "Synchronize Folder" -> "Scan for metadata updates".
What should I do? I'd like my lens information do display correctly, as I'll buy a new lens soon.
I have attached one of the photos that Lightroom doesn't read the data correctly from. Try importing it into your Lightroom, and see if how the info displays.
Thanks in advance.

Are these jpgs or RAW? I have only edited metadata on jpgs.
It looks like Vista's import stripped out all the makernotes. I didn't look at your file but that seems to be what happened. Be warned, Photoshop CS2 also strips out makernotes!
Now how to fix the problem. If you want to edit the metadata on files already loaded into LR, you need to write out your metadata to the files first, then edit the metadata, then read the new metadata into LR. This is scarey for me, so I always make sure my backup is up to date on the images first.
What to do... You probably can't put back all of the makernotes, so what to do to get the lens information in. I don't know if putting back in the makernote LensType would trigger LR to reconsider its lens information. I don't know. If it had a real lens name, my guess would be no because it would have an XMP::Lens field which would override. But maybe unknown lens doesn't have this field and it would re-read the makernotes.
The other solution is to forget about makernotes for these images and put the exact text you want into XMP::Lens. I think that's the "easy" way.
In either case, you will have to become familiar with exiftoolGUI or exiftool itself. I use the command line exiftool but it looks like you can edit multiple files with exiftoolGUI. Select your files, click the edit thingy (^) under XMP, choose various, and there is lens. Put in the text you want.
I would do this with one file first. If the lens shows up after you read the new metadata into LR, you know you have it right.
Note, exiftool can write backup files for each file. This makes too much of a mess for me. I prefer to copy the directory first (I have copies anyway, I just have to make sure the backups are up to date).
Good luck! I'm struggling with a similar situation where the same lens used by two different cameras is coming out with a different name. I need to go back and "fix" the names in the images already imported, and then develop my procedure for setting a single unique name before I load new images into LR. Not too much of a problem because I'm loading in GPS information anyway... What's another call to exiftool...
Judy

Mail does not retain correct external server path for Exchange Server '07 even when "automatically detect and maintain account settings" is unchecked. Advice?

Mail keeps resetting the external server path for an Exchange server '07 account when the program is closed and reopened. This happens even though "automatically detect and maintain account settings" is unchecked. To reset to the correct setting I need to disable the account, make the change and save with the account disabled, close Mail, reopen Mail, and enable the account. Then the settings are maintained and Mail works great... until Mail is closed and reopened again. At that point the server path reverts to an incorrect setting. Anyone else experiencing this? Advice? I don't think this is a problem with the Exchange server because this problem did not happen with OS X Mavericks.

This this to fix repeated password requests....
Open Keychain Access in Applications/Utilities
Search for your Dreamhost accounts. There should be two entries (incoming, outgoing) for each account.
It's not uncommon to find old entries. You might want to delete all and start clean.The Keychain isn't smart and will keep all old entries when you add/change a password.
While you are in the Keychain run Keychain First Aid, Under Keychain Access in the Menu bar.
Open Mail
Open Connection Doctor.
If you see red for the account, enter the password again.
If you continue to have problems, delete the account then add it back.

Recommendation for correct wide angle lens and flash for real estate photos for Canon Rebel T3i?

Hi I'm new to the forum. I always hire out a professional photog for my real estate photos however have thought that with the amount that I pay them, I could buy my own wide angle lens to do on my own.
Any recommendations for what wide angle lens and flash to buy?
Here are some examples of the work they have done in the past for me:
Any advice would be much appreciated. I enjoy amateur photography with my family and portraits but am hoping to be able to do more of my own work on my listings. Thanks!
Solved!
Go to Solution.

Your samples look like incredibility simple images to do. I also suspect little artificial light was added. Possibly just a bounce off the ceiling.
Since you already have a Rebel T3i, I would get the Canon 430 EX, and just one. But be aware it will likely not provide equal coverage for a 10-22mm lens. Ten millimeters is pretty wide even on a T3i. Bouncing off the ceiling will help this.
Some ceilings may not be good for bounce either.
Give it a go and you will learn what works and what not. But the old saying, KISS, applies. You will learn!
Photshop and/or Lightroom are great additions. They both have learning curves and PS a very long learning curve.
Still think your photographer is overpaid?
EOS 1Ds Mk III, EOS 1D Mk IV EF 50mm f1.2 L, EF 24-70mm f2.8 L,
EF 70-200mm f2.8 L IS II, Sigma 120-300mm f2.8 EX APO
Photoshop CS6, ACR 8.7, Lightroom 5.7

I am using an Apple TV in a hotel with free wi-fi, the Apple TV automatically detected the wi-fi network, and I'm am signed in to the Apple iTunes Store, but the screen continues to show cannot connect to iTunes Store!

I am using a newly purchased Apple TV in a hotel room that has free wi-fi, the Apple TV has detected the network automatically, I am signed in to the Apple iTunes Store, using my Apple ID, and password, but the screen always says "cannot connect to iTunes Store"

Try streaming other content.
If the hotel's network requires login via webpage then it won't actually be connected and you will need to contact the provider to gain access.

Detect / Resolve Conflicts: Automatically detect and resolve conflicts

Hi
From documentation:http://technet.oracle.com/products/oracle9i/daily/jun05.html
" Detect / Resolve Conflicts: Automatically detect and resolve conflicts "
I know that the detection of the conflicts between versions is automatic, but I didn't know that the resolution was also automatic.
So Can you tell me, please, in which cases the resolution of conflicts is automatic?
thank you in advance
(sorry for the previous message)

Just to follow up on Arun's reply: The Workspace Manager manual has the correct information (i.e., conflicts are detected automatically, but must be resolved manually). The error is just in the OTN document that you refer to.

I have an Epson printer on a Wifi network. Windows 7 desktop and and HP Win 7 laptop (my wifes) print to it just fine. My MacBook Pro running Yosemite won't detect it, and I have the latest driver installed. No problem when I had a Canon...

I have an Epson printer on a Wifi network. Windows 7 desktop is running the network, and my wife's HP Win 7 laptop prints to it just fine. My MacBook Pro running Yosemite won't detect it, and I do have the latest driver installed. I didn't have a problem when I had a Canon Pixma on the network, but when I replaced it with the Epson nothing seems to work. I go to add a printer to the queue and only the FAX function of the printer shows up - not the WS-4530 print function. Does anyone out there have any suggestions? Please??? :-)

Hi Kelly,
As someone who has to print from my Mac to a networked printer at home all the time, I can certainly understand how frustrating it must be to have that fail to perform as expected. Let's see if we can get you up and running.
I would suggest that you troubleshoot using the steps in this article -
OS X Yosemite: Printing troubleshooting
Start with the section titled Check the network.
Thanks for using Apple Support Communities.
Sincerely,
Brett L

Hi. I am using the iPhone 4S and when I'm searching for places using Google it does not automatically detect my location. How do I change this? FYI...under settings i

Hi. I am using the iPhone 4S and when I'm searching for places using Google it does not automatically detect my location. How do I change this? FYI...under settings i

If you are missing using google maps - try the Nokia map app called "here"

Hi. I am using the iPhone 4S and when I'm searching for places using Google it does not automatically detect my location. How do I change this? FYI...under settings i have it set at "Use new precise locations from my device."

Hi. I am using the iPhone 4S and when I'm searching for places using Google it does not automatically detect my location. How do I change this? FYI...under settings i have it set at "Use new precise locations from my device."

If you are missing using google maps - try the Nokia map app called "here"

Is there a way to automatically detect and delete duplicate photos in a library

I just imported a load of photos into my main iPhoto '11 Library from several older MAC's Photo Libraries. Despite repeatedly using the "Don't Import Duplicate Photos" dialogue box, I have many duplicate photos. Is there a way to automatically detect and delete Duplicate Photos?
I also have iPhoto Library Manager installed on my MAC, but cannot seem to locate on it anything that would do this.
I have over 4,000 photos, so would really appreciate some help here! Thanks in advance...

duplicate annihilator - http://www.brattoo.com/propaganda/
And NEVER import an iPhoto library into another iPhoto library - doing so des not work and creates massive duplication
if you still have all of the original iPhoto libraries I recommend you drag the bad one you created to the desktop (delete it later when everythin has successfully been completed) and start over usin iPhoto Library Manager - http://www.fatcatsoftware.com/iplm/ - to merge the libraries
LN

I updated my 4s to IOS 8 and now it won't automatically connect with my Ford SYNC. I have to turn the phone off and then on again for it to connect.

I updated my 4s to IOS 8 and now it won't automatically connect with my Ford SYNC. I have to turn the phone off and then on again for it to connect.
Why is this? My husband's 4s is still on IOS7 and it still connects automatically.

I do not know if this will help.
For a limited time Apple will allow you to downgrade to 7.1.2. Hurry do not wait.
See brownox second post here:
Are there known problems with hdmi screen display and iOS 8?
and
http://www.gottabemobile.com/2014/09/17/downgrade-ios-8-to-ios-7/

My iPod cannot turn on, however it can when it is on my iPod dock. It won't even sync into my computer. Once I take it off of my dock it automatically turns black and I can't turn t on. How can I get it back to normal?

My iPod cannot turn on, however it can when it is on my iPod dock. It won't even sync into my computer. Once I take it off of my dock it automatically turns black and I can't turn t on. How can I get it back to normal?

Does your home button work?

I've got music on my 4s that I can't get out of my phone. I've deleted it from ITunes and tried to manually and automatically remove (sync) and it won't come out of my phone It's gone from ITunes

I've got music on my 4s that I can't get out of my phone. I've deleted it from ITunes and tried to manually and automatically remove (sync) and it won't come out of my phone It's gone from ITunes

Well the iPod is supposed to be synced from YOUR iTunes music library, if you used other means to put music on there then the iPod is going to sync to only what's on your itunes music library when you connect it.
You need to put the files into itunes.
Far as your other issues, sounds like the drive is dying.
Check this support article for assistance
https://support.apple.com/kb/TS2380
http://reviews.cnet.com/8301-13727_7-10329819-263.html
search online for that number.

Lens correction won't automatically detect lens and correct

Similar Messages

Maybe you are looking for