Lens Profile Data

Lens Profile Data :
Biogon_T_2.8_21_ZM ;
Biogon_T_2.8_25_ZM ;
Biogon_T_2.8_25_ZM ;
Biogon_T_2_35_ZM ;
CBiogon_T_2.8_35_ZM ;
CSonnar_1.5_50_ZM ;
CZ_Distagon_T_2_8_15_ZM ;
LEICA_APO-SUMMICRON-M_50_mm_f2_ASPH ;
Planar_T_2_50_ZM ;
Sonnar_T_2_85_ZM ;
Tele-Tessar_T_4_85_ZM ;
Tri-Elmar-M_16-18-21_mm_ASPH ;
Tri-Elmar-M_28-35-50_mm_ASPH .
By sending this e-mail containing the attached lens profile data to Adobe, you grant Adobe a nonexclusive, worldwide, royalty-free and fully paid license to use, modify, reproduce, publicly perform and display, and distribute such lens profile data in products and services created by or on behalf of Adobe.
https://docs.google.com/open?id=0B6oTZqWrSBVCdnNLQmYwLXdFbkk

Hi Simon,
I don't think we're on the same page here...   I'm asking about the creation of a lens correction profile, not the matching and application of a lens correction profile.   I've been using exiftool to supplement necessary EXIF data (e.g. FocalLength, FNumber, FocalLengthin35mmFormat, SubjectDistance, FocalPlaneXResolution, FocalPlaneYResolution)  to my images before using them to generate a lens profile in ALPC.  Since I've started creating profiles, I've found a couple EXIF data tags that were missing.  When I add them to the images and re-generate the lens profile with that same image set, the distortion and vignette parameters change, which proves that they are used by ALPC.  I'm starting to wonder how many other ALPC input parameters (EXIF tags) I'm missing.  So... Assuming someone has a fully manual system and has to add ALL of the EXIF data that ALPC would need to mathematically calculate accurate distortion and vignette models, what  EXIF data would have to be added?
Thanks!
- Jason

Similar Messages

  • Lens profile was not working!

    i generated lens profile data lcp, with Canon EOS-1Ds Mark III, samyang f=14mm lens.
    it is good working on at the same camera and nikon D3 shooting images.
    but at the Canon EOS-5D Mark Ⅱ shooting images (these are CR2 format) it is not working !!
    what is the reason? is it different camera or different image format?

    canon 5D mark ll (poor)
    canon EOS 1Ds Mark lll , nikon D3
    it's a good working !!

  • When I attempt to apply a lens profile in the Develop module the only choices are for the Fujifilm X100/S/T even though in the Library module the EXIF data correctly shows the camera as the X-T1 and the precise lens used to take the picture. How do I get

    When I attempt to apply a lens profile in the Develop module the only choices are for the Fujifilm X100/S/T even though in the Library module the EXIF data correctly shows the camera as the X-T1 and the precise lens used to take the picture. How do I get the right profile available?

    First, the required profile needs to be present. LR 5.4 supports the X-T1 in terms of understanding its Raw format, but will not come with a profile for every lens which can be mounted onto that.
    A profile is made for each specific lens, as mounted on a certain camera. It can also be used with pictures taken on a different (reasonably similar) camera body than the one originally used during profiling. This is subject to the sensor format: you can employ a given lens profile made for full frame, on an image from a crop sensor behind the same lens - but not vice versa.
    Next, the image type needs to correspond to the image type which has been built into the profile: Raw, or non-Raw.
    Lightroom offers only profiles of the right type for the image(s) concerned. There are many more provided for correcting camera Raw, than for correcting camera JPG. That is also the case with additional profiles, e.g. those accessed via the Adobe lens profile downloader utility.
    Finally, in the event that there simply is no profile out there for a given lens, it is not particularly difficult (though a little tedious) for the end user to generate one, using a further Adobe utility which is downloadable as a package, including a range of checkerboard calibration targets, each of which needs to be printed at a stated physical size.

  • How is the best way to capture frame in Lens Profile Creator?

    Hello, I read in the Shooting Guide related to Adobe Lens Profile Creator:
    When framing the chart in different areas of the image frame, use a combination of physically moving and tilting the camera to achieve an optimal balance for LCP generation.
    i. Only moving the camera to frame, so that image plane stays perfectly parallel to the chart, can have an adverse affect on LCP calibration data.
    ii. Only tilting the chart may cause depth-of-field issues, where part of the chart may go too far out of focus due to the large angle of the chart in regards to the image plane. This can also have an adverse affect on LCP calibration data
    Ok, but I'm not able to understand at all, please help me:
    1) is it better if I'll rotate the camera on tripod to left and to right or is it better phisically moving the tripod to left and to right?
    2) is it better if I'll tilt up or down the camera on the tripod or it's better picking up or down the tripod bar?
    3) if it should be better make a combination of tild and rotate and move the camera how can I know the optimal combination?
    I hope that someone who has experimented this could explain me better
    Thank you everybody
    Damiano

    I don't know what is technically optimal, but there is an aspect of practical convenience here, as well.
    In my experiments with this, I physically moved the tripod in the left-and-right direction, and then re-aimed the camera vertically as required in order to put the target into the desired part of the frame. I was happy with the results, though I did not make any deep comparative study.
    IMO whatever technique permits you to make a sufficient variety of reasonably careful acquisitions, without being unfeasibly difficult, and which the analysis tool does not reject, is probably going to be good enough.

  • Lens Profiles not working in Lightroom 5.4?

    I've got OSX 10.9.2, Lightroom 5.4, latest Camera raw, everything up to date.
    When I "Enable Profile Corrections" for an image shot with a Sony a7r and Sony FE 55mm lens, it should automatically retrieve this profile:
      /Library/Application Support/Adobe/CameraRaw/LensProfiles/1.0/Sony/SONY (Sony FE 55mm F1.8 ZA) - RAW.lcp
    Well, it doesn't.  The only Sony lens available in Lightroom's Lens Correction panel is "Sony DT 18-200mm."  But there are several dozen Sony lense profiles in the "Sony" directory.
    And more puzzling, the camera "Make" menu lists 8 manufacturers (Apple, Canon, DJI, GoPro, Nikon, Sigma, Sony, Tamron) but leaves out a number of others — Fujifilm, Hasselblad, Leica, Mamiya, etc.
    And as with Sony, only one Tamron lens is listed.
    I've tried re-installing Lightroom fresh, and no luck. 
    Photoshop works fine and has all the lens profiles.
    Anyone else noticing this?  Got a fix?
    Irked in Cambridge,
    Mike

    I only shoot in RAW, and I am having this same issue. I shoot Nikon with a Tokina lens. This morning, Tuesday October 14, 2014, I had this setting. I closed the program and restarted it, and now I only have Apple, Canon, DJI, GoPro, Nikon, Sigma, Sony, Tamron lens profiles. There was not an update, nor did I actually change any settings. What is going on here?
    I talked to customer support, whom suggested that I was stoned out of my mind because these profiles do not exist in lightroom. I did as the rep asked, followed the link and downloaded the "new" profile. Now I can't get it installed. Meanwhile, my photos are waiting for me to edit them. Can someone please help out here?!

  • Lens profile not recognized by LR 5.3

    At work, on a Windows 7 laptop, I used the Adobe Lens Profile Creator utility to make an LCP file for a Nikon 1 6.7-13mm zoom lens.  After submitting that LCP file to adobe via email, I copied it to my Dropbox.  At home, on my Mac OS X 10.8.5, I copied the LCP file from the Dropbox to:
    \Library\Application Support\Adobe\Camera Raw\Lens Profiles\1.0\
    Then I launched LR 5.3, navigated to a raw (NEF) image shot with this lens, and attempted to apply the lens correction in the Develop pane.  Although the Library correctly shows the meta data for the lens and camera, the Lens Correction section in Develop does not even list that lenses LCP file in the drop down menu.  Instead, LR attempts to apply a different lens profile which does not match the focal length of the zoom.  I'm wondering if the LCP file that I created will only work on a Windows PC since that is where it was created?  What other explanation could there be for this problem?  Thanks for any advice...

    Update - I stayed up late last night and re-ran the lens profile creator at home on my Mac OS X 10.8.5.  Placed that LCP file in the directory I originally mentioned above (I overwrote the earlier LCP file created on a Windows machine), launched LR 5.3, and LR successfully matched the new profile with my lens.
    Lesson learned - an LCP file created on Windows OS cannot be used on a Mac, and I assume, vice versa.  In retrospect, this shouldn't be a surprise (but some other file formats appear to work on either).  I wonder if Adobe translates user submitted LCP files from one platform to the other, so that downloads are offered to the community equally on either platform...

  • After upgrade to  lightroom 4.3, my canon 7D is not showing up in lens profile correction

    I think this happened after upgrading to lightroom 4.2, but I am not sure as I haven't used Lens profile correction in some time.
    When I enable the "Enable profile corrections" checkbox in "lens corrections" The Make and model of the lens is recognized, but the profile field has only 2 optoins, "canon EOS 1D MK III" and "Adobe". It does not have any other options including the EOS 7D that I use. Tried uninstalling and installing again, that didn't help.
    I found in the forum that for Win 7, lens profile is supposed to be stored in "C:\ProgramData\Adobe\CameraRaw\LensProfiles\1.0", in my case the LensProfiles directory does not exist. There is a CameraProfiles directory(C:\ProgramData\Adobe\CameraRaw\CameraProfiles).
    How do I solve this?

    There is nothing wrong with your lens profiles. 
    The issue is that you are adjusting a JPG not a raw file.  When adjusting raw files the camera model is not listed with the profile because it doesn’t matter and all of them say Adobe as their source for Canon cameras at least, but when adjusting JPGs the camera may have done certain adjustments internally so it does matter and is why you see the wrong lens-distortion occurring when choosing the 5D Mark III profile with your 7D JPGs.
    For the record, I have profiles in both the locations mentioned: under Program Files\...\CameraRaw and under ProgramData\...\Lightroom 4.x.  This makes sense because I have both Photoshop CS6 and Lightroom installed.  The ones under Lightroom are all dated 12/2012 while the ones under Camera Raw are mostly dated 2/2012 with some from 11/2012 and other dates.  The profiles are probably the same, but the Camera Raw ones retain the date of the original profile creation whereas the Lightroom ones all get updated to the same date.  Lens profiles can also be installed with the DNG Converter, although I'm not sure which of the two locations those install to.

  • Lens Profiles not registering in Lightroom 4

    I have a number of lens profiles that I have created with Adobe Lens Profile Creator and placed in the  designated folder, but when I run Lightroom, they do not appear in the list.
    There is an "index.dat" file under folder 1.0 that I suspect needs to be updated, but I don't know how.
    I also added a Minolta folder since there was noe befor to place my Minolta lens profiles. This does not show either when I run Lightroom.

    Rikk is correct. User created lens profiles should be put under the user specific lens profiles folders.
    On Mac, put them under (note there is no space in the "CameraRaw" sub-folder) or any of its sub directories:
    Hard Drive>Users>your user name>Library>Application Support>Adobe>CameraRaw>Lens Profiles>1.0
    On Windows,
    C:\Users\your user name\AppData\Roaming\Adobe\CameraRaw\LensProfiles\1.0
    I thought ALPC will default to save to these user speficic locations.

  • The new Sony DSC-RX10 Lens Profile does not appear in the Enable Lens Profile Develop Module.

    The new Sony DSC-RX10 Lens Profile does not appear in the Enable Lens Profile Develop Module.
    The wrong lens F3.5/6.3  profile is checkmarked and I can not find the new  RX10  Sony 70-200 F2.8 G SMM11 profile.  The meta data in the Library module correctly list the Sony RX10 and the Correct lens. 
    How may I select the correct lens profile for my Sony DSC-RX10?

    Ask in the PS/ LR/ ACR forums
    Mylenium

  • Metadata and lens profile don't match

    Hi,
    I have a Fuji X-e1 and the latest update of LR 4.4 running on 10.6.8, 16GB RAM, all OS software up to date.
    The problem is my Fuji RAW files don't show the correct lens profile in the Develop module. The only choice available to choose is for Fuji X100 (which I've never owned or shot). The metadata in the Library module is correct for both the lens and camera, and also shows correctly in Bridge.
    However, with the same software on a friend's Macbook Pro -- also 10.6.8, LR 4.4, etc. -- the lens profile correctly allows for the X-e1 and 18mm lens auto-correction.
    I uninstalled LR on the desktop using an uninstaller called Zap It, downloaded 4.4, reinstalled and still the same 'error'.
    Any ideas on 1) why the error and 2) how to correct it?
    Thanks!

    There are a lot of profiles for Raw-images but much less for JPG images.
    Lr will display only those lens profiles that apply for the file format in question. So when you have a JPG image the profiles for Raw images will not be displayed in Lr, and vice versa.
    If you don't have the correct lens profile in you list you have to download it.
    For this you need the Adobe Lens Profile Downloader.
    And for this program you need Adobe Air.
    Download both programs from Adobe's website - they are free of charge.
    Then install Adobe Air first, and when that is installed, install the Lens Profile Downloader.
    Once it is installed just open it, it is self-explanatory and will display all available lens profiles once you have selected your camera and lens makes.

  • Light room lens profiles

    Does anyone know how to make this work reliably?  All my lenses provide exit data, yet if I have the lens profile set to auto it often will not assign the right lens. Worse if I choose a devoloo preset that specifies a lens, then set it to auto and then eg change the vignette or distortion value it will drop back to the previous lens.  The only sure fire way I've found to get it to work - or to make sure the right profile is there is to switch to another manufacturer and then back to the.correct manufacturer.  If it picks a lens I don't have as the profile then I've bussed wrong and have to pick another manufacturer. This is obviously Bonkers.
    PS the new forums are virtually unusable on mobile. For design software manufacturers this is not great

    Do your lenses have Adobe-supplied profiles that are listed on Adobe’s lens-profile page or are they ones you’ve created or downloaded because Adobe doesn’t supply these lens profiles?
    http://helpx.adobe.com/x-productkb/multi/lens-profile-support-lightroom-4.html

  • Lens Profiles in Lightroom 3

    I've created a lens profile for the Olympus E-P2 M.9-18mm F4.0-5.6 lens using the Adobe Lens Profile Creator. I used RAW files converted to DNG. However, I cannot figure out where to put the profile so that Lightroom recognizes it. Initially, I saved the profile to the default location chosen by the Profile Creator, but this didn't work, though Photoshop finds it with no difficulty. Can anyone help?

    I'm using Windows 7 64x so I can't comment on a Mac but suspect the same applies. Two downloaded profiles were stored in a default user location - the same place that Lens Profile Creator would file it but the default location for Lightroom profiles was the shared profiles location.  I simply copied the only two profiles across from user location to the shared location After a relaunch Lightroom placed them at the bottom of my list.
    See http://www.computer-darkroom.com/blog/lens-correction-profiles/
    Quoted below
    User profiles location:
    Mac OSX: /Users/(User Name)/Library/Application Support/Adobe/CameraRaw/LensProfiles/1.0
    Windows 7 or Vista: C:\User\(User Name)\AppData\Roaming\Adobe\CameraRaw\LensProfiles\1.0
    Windows XP: C:\Documents and Settings\(User Name)\Application Data\Adobe\CameraRaw\LensProfiles\1.0
    orShared profiles location:
    Mac OSX: /Library/Application Support/Adobe/CameraRaw/LensProfiles/1.0
    Windows 7 or Vista: C:\ProgramData\Adobe\CameraRaw\LensProfiles\1.0
    Windows XP: C:\Documents and Settings\All Users\Application Data\Adobe\CameraRaw\LensProfiles\1.0

  • Pentax Lens Model Data in Aperture

    I have finally figured out how to get Aperture to display Lens Model EXIF data for Pentax cameras.
    The problem is that Aperture is looking for that date in one specific field, but Pentax stores it in another. The solution is rather like what we did back when Aperture could not import PEF files. Using exiftool, it's possible to copy the the lens model data from the field Pentax puts it in to the field Aperture expects to find it in.
    This is a procedure you can use (a) for importing new pictures and (b) modifying selected pictures in your Aperture library.
    Assuming you've installed the exiftool library, here are the steps I have used successfully:
    1. Have the pictures you want modified in a folder +in your user folder+. For this example, we'll call the new folder "lenschange." These might have been exported from a project or imported from a camera. I have verified this works on PEF and JPGs.
    2. Open the terminal and type the following command exactly except put your actual user folder name in place of "YourUserFolderName":
    exiftool '-Lenstype>Lens' /Users/YourUserFolderName/lenschange (hit return)
    It will take exiftool a while to do this. It will open each file, move the lens model data, and write a new file, renaming the old one with _original at the end of the filename.
    3. Import the new files into Aperture wherever your want them.
    You should now see the Lens model data in the "Lens Model" field for the EXIF data.
    Clunky, yes; but if you really want that data visible in Aperture, this is (for now) how it has to be done.
    Message was edited by: Lawson Stone

    clawhammer, OMG that is VERY strange. Given what I have read like using exiftool in terminal and sRGB vs adobe profile that this works is odd. Obviously the theory that Aperture is looking for the lens info in the wrong place is not totally true.
    Here's what I did with one Pentax. pef image. In the adjustment HUD in the 'RAW Fine Tuning" brick (Aperture 2.1.2) I switched from 2.0 to 1.1 then back. For a very quick moment I saw the lens info appear in the metadata for Lens. But it went right back to blank. BTW the 1.1 image was awful (green!). So I tried the same thing with 2.0 to 1.0 and back. This time it stuck and I can see the lens info "smc PENTAX-DA 50-200mm F4-5.6 ED".
    To me this is very weird. Obviously it is there somewhere AND accessible to Aperture but either Apple or Pentax is screwing up. Now this is only one image but now I'm thinking can I use Automator or AppleScript to run through my whole library to make the correction (man this would take a lot of time). And then how could I automate this on download.
    I'd be forever grateful if either Apple corrected what now seems like a very simple problem or some script guru solved the library conversion and the download issue with a one step process. Clearly the info is still there so HEY APPLE FIX THIS!

  • Directory of Lens profiles in Win 7

    In LR4 some lens profiles are not available that are in LR3. It may well have to do with the fact that I "downgraded" some profiles that were only available as RAW versions to non-RAW versions. Unforgivable but I just don't always shoot in RAW. They do show up in LR 3 as I mentioned and I believe that they are stored in C:\ProgramData\Adobe\CameraRaw\LensProfiles\1.0\ but get the idea that LR4 uses some otther directory... Is thatt right?

    Sorry, no idea why the change was made....I just know that it was.
    In the early days of the LR4beta there were quite a few comments about the respective size (within Program Files) of LR3 and LR4....the latter having a footprint of almost 800mb, LR3 being less than 100mb. To some, this was evidence of sloppy coding and application bloat, but of course they hadn't realised that over 300mb of camera/lens profiles had switched from Program Data (LR3) to Program Files (LR4b). That made the real difference about 400mb, almost all of which is attributable to the 200+mb of Book Templates and the almost 200mb of stuff seemingly video related (in the Support sub-folder).

  • Looking for D7000 and Tokina 11-16mm Lens Profile

    I would think by now someone would have posted this lens profile but I can't find it for the life of me, sorry. I am sure this has been discussed to death but I have downloaded the lens profile creator (haven't figured out how to use it yet) and the Adobe Lens Profile Downloader (doesn't seem to have any third party lens data for the D7000). Any help would be great.
    On a side note I am also looking for a lens profile for the Pro-Optic 8mm f/3.5 fisheye, which I knew would be even harder to find, but if anyone has either of those I would greatly appreciate a link to download the profile. Thanks, Scott

    There are only Nikon brand lenses in the dB, nothing from Tokina, and nothing for the 11-16mm.
    ~~~~~~~~~~~~~~~
    Scott Fillmer | Sent via iPhone
    http://www.scottfillmer.com
    cell / text 334-787-9317

Maybe you are looking for