Lens profile downloader does not install profile into LR5

I am trying to install a lens profile for a Canon 400mm 5.6 L lens into LR5. I am using the lens profile downloader 1.0.1 this did install this lens profile to my LR 4 version. It appears to install this lens profile into LR5. However when I look in the lens profile area of LR5, the Canon 400mm 5.6 L profile does not show up. I am running win7 64 bit.

Do not copy your profiles to two different places. User-created/downloaded profiles will be ignored in the Adobe-application locations and you don't need to duplicate the Adobe-supplied profiles under the Users folder. This ignoring of user-supplied profiles in the Adobe app folders started some time during the LR4 series.
On Windows 7/8 the following folders are used:
Adobe-supplied lens profiles for Lightroom go under the LR-version\Resources folders:
C:\Program Files\Adobe\Adobe Photoshop Lightroom X.X\Resources\LensProfiles\1.0
C:\Program Files (x86)\Adobe\Adobe Photoshop Lightroom X.X\Resources\LensProfiles\1.0 (for 32-bit LR on a 64-bit system)
Adobe-supplied lens profiles for the Camera Raw plug-in used by PS and PSE and PRE go under a ProgramData location:
C:\ProgramData\Adobe\CameraRaw\LensProfiles\1.0
User-supplied profiles either created or downloaded go under the Users location and are seen by both Lightroom and the Camera Raw plug-in:
C:\Users\yourusername\AppData\Roaming\Adobe\CameraRaw\LensProfiles\1.0\Downloaded
where the Downloaded folder seems to hold all the ones I have download for various camea makes and models, and I don't have to seperate them individually by camera manufacturer although it probably doesn't hurt if you have quite a few of them.

Similar Messages

C7180 Win8.1 Download does not install

I have just upgraded from Windows 8 to Windows 8.1.
I have downloaded and run the Windows 8.1 software and drivers for my C7180 All-In-One.
The files are extracted and I'm presented with the Installer Window. When I click on "Install" I see a brief image of a CD spinning - then nothing. The software and drivers do not seem to install.
I have unistalled my previous Windows 8 software - this does not help.
Everything I try seems to take me round the same loop of downloading what appears to be the same file. I'm stuck.
Please help - running out of hair!
This question was solved.
View Solution.

Hi,
Follow the steps below and check if that resolve the issue:
1. First be sure to disable any running security software on your PC, If you have Mcafee software apen it. from the Virus and Spyware Protection section click on Schedule and run scans. Click on Real time scanning and then on Turn Off. select till I restart the PC and confirm by clicking the Turn Off button otherwise follow your security software documentation.
Now try reinstalling the HP Software and check if the installation goes as expected.
If the issue persists continue following the next steps below:
2. Open the run dialog by clicking both the Windows key and the R key on your keyboard. Type %windir% and click on OK.
3. Type hpoins*.dat into the top search bar, if there are any results rename the extention into old instead of dat. (e.g. hpoins1.old)
4. Type hpwins*.dat into the top search bar, if there are any results rename the extention into old instead of dat. (e.g. hpwins1.old)
5. Launch the Run dialog by clicking both the Windows key and the R key on your keyboard. Type MSIEXEC /UNREGISTER into the Run dialog and click on OK.
6. Launch the Run dialog by clicking both the Windows key and the R key on your keyboard. Type MSIEXEC /REGSERVER into the Run dialog and click on OK.
7. Run the installation file and check for any difference.
Regards,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

CS3 download does not install and doc refers me to blank web page

I have downloaded both files to re-install CS3 on my mac. None of the .DMG doanloads have an installer
that works. The "Setup" file either reports "insufficient resources" or "contact Adobe." Attempts to read the
documentation simply results in a google screen.

for cs3 design standard:
ADBESTPPCS3_WWE.dmg is 2.1gb
and
STPPCS3_Cont_WWE.dmg 242mb
download from the below link:
Downloads available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 12 | 11, 10 | 9, 8, 7
Photoshop Elements: 12 | 11, 10 | 9,8,7
Lightroom: 5.5 (win), 5.5 (mac) | 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

Camcorder download does not automatically split into individual clips

I downloaded four DV tapes recorded on my Canon ZR40 (seven years old) DV camcorder.
When downloading two of the four tapes, no individual clips were created; I got one big clip. On the other two tapes, they were broken down into scenes normally.
Am I doing something wrong? (Timecode checkmark is selected)
Can you instruct PRE to automatically break one large clip into individual scenes once it is already on the disk? How?
Thanks

I always use DVdate by Glagla to capture my DV clips. The clips can be named according to shooting time and date, giving two advantages:
1. Clips from several tapes will sort by shooting time in PE media panel.
2. Shooting time and date is visible within PE.
If it works on your tapes forget about capturing with PE.

My creative cloud desktop downloader does not install

Hi
The desktop downloader had an update, that I ran 3 days ago.
it downloads, but then after i allow it to make changes, it quits with an error and no further information.
I have trdied several times over the last few days
thanks

Hi jumpsuitart,
Please let us know your Operating system and exact error message at the time of failure.
Also, Please share the PDApp.log from the below location :-
• Windows XP: \Documents and Settings\[username]\Local Settings\Temp
• Windows Vista and Windows 7: \Users\[username]\AppData\Local\Temp
• Mac OS: Users/~/Library/Logs
Note :- DO NOT PASTE THE LOG HERE RATHER PUT IT ON PASTEBIN.COM AND SHARE THE LINK HERE.
Thanks,
Manish Sharma

TS1702 The App, QR Reader W/Ad Remover! Does not install, YES, I followed the FAQ info!

Noprmally, I click on the App, pay for it (If it's not Free!) and click 'install' and it does! Not this one I even reset the iPhone 5, Because I just purchased it and had EVERYTHING backed up, and still. "QR Reader" does not install OR work when I click on the Icon!

It is an up-date. I clicked to install and watched the other app updates install just fine and I have installed several other updates since then, the QRReader just stares back at me and does not load! I tried to erase it from iTines and the iPhone and then install again. The QRReader Updates do not install! The App does not work, the download does not install and this is making my Galaxy S3 look pretty good right now! It is on my iPhone and not installing, period!

Lens profiles in LR5 disappeared. How do I transfer them from LR4 into LR5?

Lens profiles in LR5 disappeared. They are still in LR4 and in PS CC. How do I transfer them into LR5?

One possibility: use OneStepDVD function of iDVD that comes with all recent Mac. This will capture from the camera and directly create a DVD with its contents, without any intermediate editing step.
Or you could use iMovie or FCE to capture and edit the movies, and then iDVD to author and burn DVDs.
In any case your camcorder must be connected to your Mac with a firewire connection. If it is too old and it does not have such connection, a possibility is to use an intermediate A/D converter from analog input (received from the camera analog out) to digital output on a firewire link.
Piero
Message was edited by: PieroF

Server 3 downloaded but does not install. HTTPS proxy error

Hi all,
Thanks for looking into my problem.
I had a running OSX Mountain Lion with working OSX server 2.2.
I upgraded to Mavericks (works fine) and server app 2.2 showed does not work. That is normal.
I purchased the new server 3 app (i.e. OSX server for Mavericks) and it downloaded fine.
But when I click the server app icon and the dialogue for installation starts it does not continue to install.
The first question in continue, the server app then shows the license, after acceptance it starts a dialogue
"To configure OSX server on this Mac an administrator account is required. Please enter your password"
Upon entering the correct username and password a cryptic message appears:
"An error occurred while communicating with the secure Web-Proxy-Server. (HTTPS)"
(Or something like that: this was translated from German dialogues)
I cannot find any feedback what this is about. The server 3 app ends then and the server software does not install or configure the OSX server to get it operational again.
My Question:
What is wrong or am I doing wrong?
How can I fix this?
Some more data:
The original OSX server installation was an open domain server.
Upon checking the DNS name as described in http://support.apple.com/kb/HT5300, the scutil --get HostName resolves the correct machine name (FQDN) but the host command does not resolve the correct DNS entry.
I am really stuck on this.
Can anybody please help?
Any help is greatly appreciated.
Many thanks already

Hi all,
I read that one should disable the SSL on a OSX server with Open Domain, prior to installing server 3. To double check: where is that configuration option hidden? How can I do this after upgrading the OSX client to Mavericks?
Seems I have not done that prior to upgrading OSX from mountain lion to mavericks. Now server 2.2 is disabled and I cannot access the server and installing server 3 app does not work.
Some details:
As described in http://support.apple.com/kb/HT5300
(start snip)
OS X Server: Steps to take before upgrading or migrating the Open Directory database
Disable SSL
If you have SSL enabled, disable it before upgrading.
(end snip)

Can I load a specific camera/lens profile into LR and if so how?

Can I load a specific camera/lens profile into LR and if so how?

If the camera profile or lens profile is in a Lightroom compatible format (i.e. created by the DNG Profile Editor or Lens Profile Creator) then you can load the profile into LR by putting it into the following folder and restarting LR.
Windows Vista or 7—C: \ Users \ [your username] \ AppData \ Roaming \ Adobe \ CameraRaw \ CameraProfiles \
Mac—Macintosh HD / Users / [your username] / Library / Application Support / Adobe / CameraRaw / CameraProfiles /
For the lens profiles, substitute the LensProfiles folder for the CameraProfiles folder.

It downloads version 4.1 - but does not install it and always shows this as Firefox 4.0 - Yahoo edition. Moreover the tabs open when I close firefox do not open when I start next.

Question
It downloads version 4.1 - but does not install it and always shows this as Firefox 4.0 - Yahoo edition. Moreover the tabs open when I close firefox do not open when I start next. edit
Details

Download the official version of Firefox 4.0.1 here: <br />
http://www.mozilla.com/en-US/firefox/
Then un-install that Yahoo branded version and install the official version.

Mavericks downloads but does not install

Trying to update mavericks. It downloads but does not install. Any suggestions?

Can you find an icon like this in Applications?
What happens if you open it?

I download the 3.2 update from 3.1, but it does not install. I am using system 7 with an iMac quad core, which works fine, but it won't update.I don't know what to do

I can't upgrade from 3.1 to 3.2 Bootcamp, despite multiple attempts to download. it seems to download but the upgrade does not install and I don't know where to look to make it install. Any suggestions?

You are in Windows; you already have inserted your OS X DVD and run SETUP and installled Boot Camp 3.0.x (shows in Windows control panel: Programs and Features.
Start => Apple Software Update (also in Windows) will download and install updates as well.

Windows 10 downloads but does not install...

windows 10 downloads but does not install on my Stream 13-c010nr (OS 8.1). Says I need 5 GB more before it can install. Should I factory reset? Any suggestions?

If you can run the recovery, it should free up enough space although in this thread, it did not. It might also help to download the Windows 10 ISO file and run it from a USB. You do not have to run any updates to Windows 8.1 if you do that, you can upgrade right after restoring to the factory configuration.

I have PIXMA MG5320 and I am running Win 8. Software cd does not install. I want to scan, but havin

I have PIXMA MG5320 and I am running Win 8. Software cd does not install. I want to scan, but having trouble.
I insert USB stick into USB port on the printer.
I select SCAn and then select USB. I select " <i>" key. I do not find any data on the USB stick.
What gives?
I cannot install the software on Windows 8

Hi jvandal,
The CD that came with the PIXMA MG5320 does not include Windows 8 drivers and softare, so you would have to download the drivers and software from our website. Use the following steps to download the drivers and software:
Go to Canon's Support & Drivers website at:
http://www.usa.canon.com/cusa/support/consumer
Enter your model name into the Model Name field, then click GO.
Select your operating system in the Select Operating System and Select OS Version dropdown lists, respectively.
Expand the Drivers section by clicking the red triangle.
Click on the file named MG5300 Mini Master Setup.
After reading the details and disclaimer, click 'I Agree Begin Download' and save the file to your computer.
Once the download is complete, double-click the file from its download location to begin the installation.
Once complete, click the I Decline Go Back to return to the download page.
Expand the Software section by clicking the red triangle.
Click on the file named MP Navigator EX Ver 5.0.0.
After reading the details and disclaimer, click 'I Agree Begin Download' and save the file to your computer.
Once the download is complete, double-click the file from its download location to begin the installation.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Acrobat/Indesign does not export correct into the selected output intention (eci_iso_coated_v2_300)

I use the CS6 suite with Acrobat XI at windows platform.
When I want to save a file from InDesign as .pdf with output intention eci_iso_coated_v2_300 the result is a .pdf with more than 300% ink coverage.
I tried to transform the result in Acrobat XI into this standard output intention, but also the result has more than 300 % ink coverage.
What is the reason of this bug?
Before with Acrobat X this worked without problems

Hi Rob,
I was told the new way to work would be to draw files via Bridge direct into the InDesign file
and I thought automatically the color would not be changed.
my colourmanagement setting in bridge for the whole CS6 was ECI isocoated_V2_300
The Illustrator file was saved without color profile.
In this test file I used 3 kinds of black: background of pirate in cmyk 79,34 / 72,78 / 59,38 / 79,88 = ink coverage 291 %
DÜSSELPIRATEN in “black” (if you would convert this in the file with the cmyk button it would be the same ink-percentage as before
“e.V.” was set to 100 % k
I set the preferences for Acrobat from InDesign CS6 as pdf X4 with profile eci isocoatedV2_300 in three ways:
no color conversion
convert to profile
convert to profile keeping existing values
in all tree files the pirates background has 322 % ink coverage instead of 291 %
Why does Acrobat convert “black” in the wrong way? If I click in Illustrator on the 4c button to convert the “black” into 4c it is 291% ink
Acrobat should come to the same result with all profiles: iso coated V2 and iso coated V2_300
The same happens also by saving as .pdf X3 or .X1
The minimum what I expect is, that Acrobat reduces ink coverage for black to 300 %
I also made test with the new ECI profiles for laminated prints from 2012.
And with newspaper profiles
In this case the ink coverage comes below 300 %, but only when I choose convert to profile.
And then the 100 % k converts to cmyk, what I don’t want to have with text.
Is there no way to reduce ink coverage below a special percentage without changing Text 100% k
And is there a bug in Acrobat XI with the ECI IsoCoated_V2_300 Profile? For there is no color reduction below 300 % in all conversion settings.
I can’t test this with Acrobat X or IX, for my computers with this software don’t run with CS6 64 bit.
enclosed you find my files
Kind regards
Lutz Hanbueckers
Hanbueckers Werbung GmbH
Brandsackerstr. 5
40764 Langenfeld
P.O. Box 40 02 01
40242 Düsseldorf
Tel. +49 02173 1 09 44 - 0
Fax +49 02173 1 09 44 - 10
[email protected] <mailto:[email protected]>
www.hanbueckers.de
Visit our site
Steady attractive offers!!!
HR Düsseldorf B 26 480
owner Manager: Lutz Hanbueckers
Von: Rob Day [email protected]
Gesendet: Samstag, 2. März 2013 04:26
An: Hanbueckers Werbung
Betreff: acrobat/Indesign does not export correct into the selected output intention (eci_iso_coated_v2_300)
Re: acrobat/Indesign does not export correct into the selected output intention (eci_iso_coated_v2_300)
created by Rob Day <http://forums.adobe.com/people/rob+day> in InDesign - View the full discussion <http://forums.adobe.com/message/5115613#5115613

Lens profile downloader does not install profile into LR5

Similar Messages

Maybe you are looking for