Lens profile for Nikon 16-85 lens

I am trialling LR5. I use a Nikon 16-85 lens. I cannot see this lens on the list of profiles in the develop module although it is on the list of supported profiles in the help files. How do i get to the profile?

My mistake. I was looking at a Tiff file. In Raw it's all there. Thanks for the tip!

Similar Messages

  • I need the lens profile for nikon 28 - 70

    By the way who the heck wants to chat with some guy in a foreign that is no help ? The is your adobe chat help LOL
    I need the lens profile for nikon 28 - 70 where to down load ????

    Download and install Adobe Lens Profile Downloader.
    With this program you can download a lens profile for 28-70mm f/2.8 for DX or FX format, raw only. Also available 28-70mm f/3.5-4.5 for DX, raw only.

  • Is there a lens profile for Nikon 24-50mm zoom?

    I'm looking for a lens profile for Nikon's AF Nikkor 24-50mm 1:3.3-4.5  The profile doesn't appear to be in Lightroom, does anyone have a suggestion of either how to get 1 included or a workaround.
    Yes, it's an old lens, but a beautiful one.
    With thanks.

    Yay that's great news ... and thanks for such a speedy reply.
    Didn't know about the Adobe Lens Profile Downloader ... so have just downloaded it for Mac and found the lens profile.
    Appreciate your help ... it'll hopefully be great for correcting the distorion i need.

  • Lens Profile for Nikon AF VR_Nikkor 80-400 f4.5-5.6 D Lens

    Has anybody done a lens profile for then Lens Profile for Nikon AF VR_Nikkor 80-400 f4.5-5.6 D Lens?
    And is there a repository of user lens profiles somewhere?
    Chuck

    ChuckTribolet wrote:
    Has anybody done a lens profile for then Lens Profile for Nikon AF VR_Nikkor 80-400 f4.5-5.6 D Lens?
    And is there a repository of user lens profiles somewhere?
    There is a repository, it's accessible through CS5's lens correction plugin, and there doesn't appear to be one for this lens at that spot at the moment.

  • Lens profile for Nikon 18-105 1:3.5-5.6 urgently needed

    Does anyone have lens profile for Nikon 18-105 1:3.5-5.6. Currently I don't have that lens, so I'm unable to create a profile on my own. Any help will be appreciated.

    Nope, the settings has config info.  The downloaded profiles for ACR6.1 are located at the first path, and are the same as for CS5 lens correction.  I followed this process for both my 16-85VR and 55-200VR profiles, later deleted them, and then re-downloaded in an attempt to figure out the vignetting problem.  I did not see a 18-105 profile listed.
    Richard Southworth
    P.S. I'm also running W7 64.

  • Lens profiles for Nikon lenses

    Hello,
    Does anyone know a site where users have posted lens profiles that they have made for the Nikon lenses which are NOT included in the Photoshop CS 5 software?
    I have a Nikon 17-55mm f/2.8 lens that needs correction when shooting at or near 17mm - and I hate to have to make my own profile if someone has already done it.  I have used the profile supplied by Adobe for my Nikon 10.5mm fisheye lens - and it is spectacular!
    Is there a master site where users have posted lens profiles for Nikon lenses?
    Dick

    Not yet, Dick. But please stay tuned ... there's something cookin' ...

  • Using Lens profiles for Nikon D800 in Lightroom 3.6

    When I use Lightroom 3.6 with pictures from Nikon D800, the lens profile for the Mikro Nikor 60 mm lens is not in the list of coice. However, when the picture is from a Nikon D5000, the same lens appears in the list. So, a lens profile exists, but is not open for pictures from the D800. How can I solve this problem? The same is true for the 18-200 mm lens, which however is not suited for the D800 due to heavy vignetting at wide angle, and with the 70-300 mm, which gives good results.

    The D5000 is a crop sensor. The D800 is a Full-Frame sensor.  The Profile for D5000 cannot be "scaled" for a full-frame sensor: thus, it cannot be used.
    Every lens has multipe profiles: 1 for Raw and 1 for Jpeg in each sensor size.  If one has not been created for your particular lens, camera a file format you have three options.
    1: Download the Adobe Lens Profile tool from Adobe Labs and create on yourself. It isn't hard but it is time consuming.
    2: Part of the Adobe Lens Profile tool is a Lens Profile Downloader where you can gain access to a community of people who have shared their lens profiles.
    3: Wait for Adobe to include it in a dot release of Lightroom.
    I checked and I did see the profile for your 60MM available via the downloader.
    http://labs.adobe.com/downloads/lensprofile_creator.html

  • Lens profile for Nikon 12-24mm

    I have Lightroom 3.6, which supposedly has a lens profile for the Nikon 12-24mm, but it doesn't show up on the list of available lenses within Lightroom.
    How would I find and import that lens profile?

    It shows up in my version of LR 3.2 (click image below) so should definitely be available in 3.6. It's listed near the bottom of the first section. Is that the lens you mean?

  • Lens Profile for Nikon Nikkor AF-S 18-35mm 1:3.5-4.5 G ED

    Hi,
    I'am missing the Lens Profile for the above Lens from Nikon. The Lens is build since January 2013 and I hoped that the new Lightroom 5 includes a Profile für this lens.
    Does anybody know when Adobe will update Lightroom with this Profile? Or does anybody has build his own Lens Profile?
    Best regards
    Winfried

    According to the Adobe Lens Profile Downloader:

  • Lens Profile for Nikon P7100

    Looking for a lens profile for my Nikon D7100.  The default in LR 4 comes up with a P6000 and a different lens than my P7100.  Where can I find user developed profiles or those available from Adobe for download?

    Read here:
    http://labs.adobe.com/downloads/lensprofile_creator.html
    http://labs.adobe.com/technologies/lensprofile_creator/
    Add: I just checked and there is no profile available for the P7100. Unfortunately, nobody created one so far, so you'll have to do it yourself.
    Message was edited by: F. McLion

  • Lens Profile for Nikon 18-35 f/3.5-4.5

    Will there be a lens profile available for the Nikon 18-35 f/3.5-4.5?  I am using LR5 & PS6.

    Download and install Adobe Lens Profile Downloader 1.0.1.
    With  this program you can download a lens profile for 18-35mm f/3.5-4.5 FX format, raw type only and for DX format, raw and jpeg type.

  • Tokina 12-24 lens profile for Nikon APS-c

    Has anyone got a lens profile for the Tokina 12-24?

    b_gossweiler wrote:
    Have you tried using the Adobe Lens Profile Downloader (see "Lens Profile Downloader" section at the end of the page)? I can see a profile for Tokina 12-24 F4 based on the Canon EOS450D there.
    The Canon profile isn't a lot of use to a Nikon shooter!

  • Create lens profile for ultra wide angle lens

    Hello,
    I am trying to create a lens profile for the ultra wide angle lens Olympus 9-18 mm (Crop factor 2). As i use the lens for timelapse, i only need the profiles for 9 mm and open aperture f4, but combined with several different ND-filters which show different vignetting depending on their filter strength. Filters are oversized, so no influence by fringe. What i need is to get rid of vignetting.
    So far everything works out well, and probably good enough for still photography. However for timelapse I need a high quality compensation of vignetting, otherwise getting flicker.
    My problem is, that with the ultra wide angle lens distance from camera to chart (A3) is just about 0.5 meters.  I did the shootings outside, in shade, when having a clear sky, and I found it quite impossible not to produce any shadow of myself or the camera on the chart. Thus I got a not perfectly even correction of vignetting.
    Can anyone give me tips how to solve that problem with producing shade on the cart? Maybe working indoors with 2 lamps can create better results? Have tried that but found the illumination of the chart so damn poor.

    I think your best bet is outside, with possibly a larger chart.  (The two-light setup indoors is problematic esp. with wide-angle lenses.)
    Instead of waiting for overcast, try waiting for a sunny clear day with a direct lighting from the sun on the chart, at a sharp angle (almost side-lit) so that the chart is clearly illuminated, but the shadow that the camera casts will be to the side (instead of on the chart itself).

  • LR lens profile for Nikon P7000?

    I cannot find a profile in LR 3.3 for the Nikon P7000.  The P6000 comes up, but no P7000.  3.3 supports the NRW files from the P7000.  Can anyone give me a hand?
    Thanks very much . .
    Jack

    Your computer has the same operating system as mine so there shouldn't be an issue with file paths being different for that reason.
    You should only see the P7000 lens profile when you edit RAW/NRW files, not JPGs.  Please confirm that when editing an NRW from a P7000 you cannot locate a "NIKON COOLPIX P7000" profile in the list (at the bottom of about 50 Nikon profiles) when Nikon is selected as the "Make".  Also confirm you do see a screen-full of profiles, not just one or two.  Do this in LR 3.4 RC.
    Please locate the P6000 lens-profile (.lcp) files that you can see in the list on your hard drive using Windows Explorer and the paths given, earlier.  If you can't find them, please be specific about what part of the path does not work or what part of the process doesn't work.  If you don't understand some part of these instructions for locating the lens-profile files, say what part.  Saying you cannot find them is not enough information.  By locating the Nikon lens profiles we can verify if the file are missing or if something else is wrong.  I would also like to see the dates of the profile files to understand how long ago they were installed.
    You should be using the start-menu/start-button and opening Computer (or My Computer), then copy-pasting each path, in turn, to the address area and hitting Enter or perhaps click on the right-arrow at the right end of the address area.  If copy-pasting the full path in the address area doesn't work, try part of it and add the foldernames one-by-one until you can't get to part of it and say what part that is.

  • Lens Profile for Nikon Coolpix P330

    Hi,
    I see that lens profile is available for P330 from the release notes of ACR 8.1 beta. Is there a way to obtain/add that lens profile to LR 4.4? I don't have any CS6 products and so cannot try and install ACR 8.1 Beta myself.
    Thanks!
    Devendra

    Nope, the settings has config info.  The downloaded profiles for ACR6.1 are located at the first path, and are the same as for CS5 lens correction.  I followed this process for both my 16-85VR and 55-200VR profiles, later deleted them, and then re-downloaded in an attempt to figure out the vignetting problem.  I did not see a 18-105 profile listed.
    Richard Southworth
    P.S. I'm also running W7 64.

Maybe you are looking for

  • Issue with Webservice for HR

    This is my problem. Have been at it for a few days now and have very little hair left. I have a custom BAPI that wraps ENQUEUE, BAPI_ADDRESSCREATESUCCESSOR and DEQUEUE. Works like a charm when executed in se37. When I make a webservice out of it, it

  • Incoming and outgoing excise invoice

    I want to enter records in incoming and outgoing excise invoice through DI API.But I can not find object related to excise.There is no help provided for excise in help center.

  • Filter in Attribute view

    I basically want to have a view that displays two columns from my table, but not have any of the columns repeat the same ID or Name For example if table data looked like this  Name ID John 204 John 204 John204 Mel 205 Mel 205 Mary 205 I want the View

  • IDOC prob

    Hi All, i have created IDOC in client 800 and send using TC BD10. In 810 client i have received usthe material using  BD11 when I checked in we05: The status is in RED color and In the Status Record it says Application Document not posted. Could you

  • Problem in creating the trasformation between my DataSource and InfoCube

    Hi All, when i am trying to create the trasformation between my DataSource and InfoCube through "Create Trasformation"...in the source of trasformation area when i am giving my DataSource 0CO-OM_CCA_1 and in the Source System T90CLNT090. system is sh