Lens Profile not available for old photos

Hi
I got busy creating a lens profile for my Canon 550 and EFS 15-85 f/3.5-5.6 IS USM as there was no profile listed for this lens when I took some photos in early July. I now find that the profile is now available (for the photos taken in the last week or so) and automatically selected when I select 'Enable Profile Corrections' BUT is still not available for the older photos - can someone tell me how to get the new profile available for the older photos - in fact why does the list not show the new profile??

Thanks Ian
I do all RAW now but to get more photos on my SD card
used JPEG for a time.
Richard

Similar Messages

Correct Lens Profile Not Available for Exported/Imported Image Files

Any help with this would be appreciated. I just noticed yesterday that when I have RAW (DNG) files in my LR5.2 library, I can select the correct lens profile to apply. When I take three of those files and merge them together in Photomatix Pro they come back as a single TIFF file. Now LR only has one lens profile available, and it is the wrong one.
This is happening with my Sony NEX-7 and Tamron 18-200mm f/3.5-6.3 XR DI-III VC. With the RAW files, I have a list of Tamron lenses from which to choose, and the correct one is available. For the merged TIFF file, however, only a single Tamron lens is available for selection, and it is not the lens I used.
If anyone has any ideas about this and can get me past it, I would greatly appreciate it.
Thanks,
~Steve

Here's my workflow for this particular situation: After importing the original RAW files, I apply lens correction using the correct profile. I export to another application that creates a new (TIFF) file that comes back into LR. Even though I already applied the correction to the original files, I can see that there is a difference in distortion between the original files and the new TIFF.
If your other application is opening the Raw file directly, it will likely be disregarding either most, or all, Lightroom adjustments even if they are somehow communicated to it. It will come down to whatever independent Raw support is built into the other application.
The other application would still need to (a) "understand" about Adobe lens profiles etc, (b) "know" where to find the appropriate Adobe profile on disk, and (c) be equipped to do the specific and proprietary processing that they refer to. The same applies for all the other Adobe-proprietary processing instructions. The only software I am aware of which can do all this reliably, in partnership with LR, is Adobe Camera Raw plus Photoshop.
I've trained myself that whenever a new file is created in an application outside of LR (including PS), I always re-apply lens correction upon first returning to LR. If I'm interpreting the above responses correctly, I shouldn't need to re-apply lens correction if I applied it to the original files. But again, it's not my observation that this is the case.
If your particular workflow is failing to reflect the first application of lens corrections (as well as perhaps, other specific adjustments) - then what returns to LR will not have undergone those kinds of corrections yet.
I'm also hearing that I may need to download a lens profile for this lens for a TIFF file format. I've never needed to do that before, so perhaps I'll give that a shot.
As I understand it, Photomatix can also accept converted TIFFs or JPGs from LR - instead of Raw fles. I am skeptical that you will realise any "clear water" advantage from sending Raws rather than TIFF (or even, high quality JPG in many cases) from LR into Photomatix - assuming the LR conversion is already optimising the images for the required purpose. You would be doing that step in an interactive environment rather than blindly via a generic converter. Such intermediate bitmaps are in my experience perfectly good candidates for HDR processing, or for exposure fusion (which I prefer - though I don't use Photomatix in particular).
Any workflow which causes LR to in effect Export suitable bitmaps that incorporate all current adjustments, will embody lens corrections as part of that. By the way, the workflow into Photoshop HDR is similarly done by way of converted bitmaps - though in that case it is ACR rather than LR which achieves these converted bitmaps, and into memory rather than into separately saved files, but the outcome is effectively the same.
The only downside is the "cleanup" is to get rid of intermediate TIFFS or JPGs afterwards. I usually put the completed "merged" image at the top of a "stack" containing the component exposures, and collapse the stack down. But the (disposable) intermediates don't get imported to LR, and by setting these to occur in a subfolder or with a distinctive name suffix, they are easily found and deleted in due course.
RP

EDI: Partner profile not available for the Ack received

Hi All,
All the scenarios are IDOC -->XI --> File
We have different scenarios of IDOC to File, where SAP sends IDOC to two (we have 5 here letu2019s say 2) diff FTP locations one say FTP1 and other FTP2 and we used 3 business systems in SLD.
1)      one for Sender SAP system(say BS_SAP) and assigned a Logical System say LS_SAPCLNT100
2)     Second one for the receiver FTP1 and assigned a Logical System LS_FTP1
3)     Third one for the receiver FTP2 and assigned a Logical System LS_FTP2
And we are getting the error in the Sender SAP System for the acknowledgement sent from the FTP1 server EDI: Partner profile not available for the LS_FTP1 when we send the IDOC to FTP1 and EDI: Partner profile not available for the LS_FTP2 when we send the IDOC to FTP2.
This is because in SAP we do not have the Logical Systems for LS_FTP1 and LS_FTP2.
Now my question is how to get rid of this? Do we need to create Logical systems in SAP for third Party Systems?
If not how to overwrite and use a single LS for all of the third party Business Systems?
Please suggest .
Regards,
Sridhar Reddy

And we are getting the error in the Sender SAP System for the acknowledgement sent from the
FTP1 server uF0E0EDI: Partner profile not available for the LS_FTP1 when we send the IDOC to FTP1 and EDI: Partner profile not available for the LS_FTP2 when we send the IDOC to FTP2.
did you get a chance to go through the below threads:
ERROR: idoc in R/3
check out the blogs mentioned in the above link...
Also check the last point (9) mentioned in the below blog:
/people/venugopalarao.immadisetty/blog/2007/01/24/troubleshooting-file-to-idoc-scenario-in-xi

Lens profiles not available in Lightroom CC

I have downloaded and installed lens profiles but they do not show in Lightroom CC as choices in the drop down menu? They were there for Lightroom 4 but not since I purchased and installed Lightroom 5 via the Creative Cloud?

I have downloaded lens profiles in an analogous folder on my computer and they work ok, so you're putting them in the right place, assuming you're logged in as user Michael.
The other thing is are the photos you're opening RAW or non-RAW, and is the lens-profile you're hoping to use for RAW or non-RAW, and is it for the same camera manufacturer (Canon, Nikon, etc) as your photos?

Advertised lens not available for delivery or store pick up, Why?

Nikon - AF-S DX Nikkor 35mm f/1.8 Lens for Nikon F-Mount Digital SLR Cameras $199
This lens is NOT AVAILABLE for home delivery at $199. Why is BB offering it for store pick-up? I spent hours trying to find a store to ship it to and I couldnt find a single location, why?
Solved!
Go to Solution.

Unfortunately its not available at pretty much every online/brick and mortar store now. The few that have it jacked the prices up big time (seen one selling it for over $400).
Nikon (and most other camera companies) was affected big time by the past disaster in Japan. Sendai (where the tsunami hit hardest) is where Nikon makes pro bodies and pro lenses (possibly the glass elements for all their lenses even ones assembled in Taiwan and china) last I heard still is having issues with rolling blackouts. Nikon also makes lenses in batches. They dont have a line for each lens. They'll make so many of this model, then so many of the next and so on.
You think getting the 35 1.8 is hard, try waiting for a 600mm F4. I waited 7 months for mine to come in.
King of the World...

How to delete old account, I can't log in due to - This email address is not available for use as an Apple ID. You may already have an Apple ID associated with this address. Please try again or sign in using your existing Apple ID.

How to delete old account, I can't log in due to error - This email address is not available for use as an Apple ID. You may already have an Apple ID associated with this address. Please try again or sign in using your existing Apple ID.

All good, I loved with AppStore and now everything seems to be back to normal.

HT201272 A few songs from my old purchase is not available for download. It shows as purchased but I can't download it. Please help me resolve this problem, what do I need to do to enable download for all my purchased songs/movies etc. - Avinash

Hi,
A few songs from my old purchase is not available for download. It shows as purchased but I can't download it. Please help me resolve this problem, what do I need to do to enable download for all my purchased songs/movies etc.
- Avinash

The purchases are probably hidden:
http://support.apple.com/kb/ht4919

System profiler "information is not available" for PCI cards

After swapping two cards in their slots, I get the message system profiler "information is not available" for all PCI cards. Mac Pro 4 core 2.66, OS X 4.11 server. The cards are still working. I tried clearing PRAM, etc. Is this a hardware problem or just system profiler being difficult? Is there any way to tell?

That is a bit odd. Maybe try forcing kextd to run can resolve. You might be working off cached info and it is giving System Profiler a hard time. Run this command and then reboot:
sudo touch /System/Library/Extensions
That will update the modify time of the Extensions folder and trick the system into thinking you installed new drivers. This will force an update of the kernel caches when you reboot.
Not sure it this will do it, but best I could think of.
Hope it helps.

Why an Error Message "Valid size not available for this Creation" in Elements 10 Photo Collage

I have several image editing programs, but I bought Elements 10 specifically to do things the others wouldn't. I wish to make a photo collage but all I get when I try, after following the instructions in the "help" and "Elements 10 for Dummies" is an error message stating "Valid Size not available for this Creation." A meaningless phrase anyway because nowhere does it request a "valid size." Please will someone tell me the magiac words to make my lovely collage automaticaslly, or shall I revert to doing it manually on one of my other excellant image editing programs?

http://helpx.adobe.com/photoshop-elements/kb/error-valid-size-available-creation.html
If nothing there helps, see post 4 in this thread:
http://forums.adobe.com/message/4248143#4248143#4248143

Elements 9 photo collage - message "valid size not available for this creation"

Hi There,
I am trying to creat a photo collage in Elements 9 and always get the message "Valid size not available for this creation.". Has anybody figured out a fix for this bug????????????
Thanks
Roy

http://kb2.adobe.com/cps/927/cpsid_92734.html

I can't update my iPhoto. "Update is not available for this Apple ID".

Updating my iPhoto has always been a problem. When I try, I get the error of: "This update is not available for this Apple ID either because it was bought by a different user or the item was refunded or cancelled."
This is the only apple ID I have ever owned, and now that I updated my Mac with the new software, I can't even OPEN iPhoto anymore. Now I can't view any of my photos and I am not a happy camper..
How can I fix this problem?????
Thanks in Advance!

Contact App Store support. There's a link on the right hand side of the App Store Window. They're the only ones who can sort out account issues.

This email address is not available for use as an Apple ID

hi
i had two apple accounts
and just wanted to change the primary email address for the both with each other
when i changed the first one my old email cant be used with other account then i tried replacing my old email it doesnt replace it says
This email address is not available for use as an Apple ID. You may already have an Apple ID associated with this address. Please try again or sign in using your existing Apple ID.
please help me

Yes, I am having the same problem. When I called apple they said that things were "tied up somehow" with another account that has a do different birthday than me. Uuuuuhh? So that means someone else can log in?... I have a feeling there is a big vulnerability with the three login options, just like with the current and past password retrieval. Apple had only suggested that I delete my current set up on my serviced and make a new ID and email.
I Just got a new email and made a new Apple ID account For now. I was hoping the email would work itself out. I assumed If I could make sure everything was verified, not associated with another account, and try to get rid of the alternate id and second email option also used to sign in (seen in Apple ID management) that could possibly be construed or mixed up with something else that it would eventually free up and become "available" again. Unfortunately im still waiting In hopes in just needs to recognize the email isn't associated with anything.
I have had a few major concerns with apple products lately especially with security. My iPhone 4s was hacked too. Some ******* was listening/recording and when I hooked to Internet he sent out the recorded portion that was available. Talk about ****** up.

Valid size not available for this creation when using Greeting Card feature

Using PSE9 with a Mac. When attempting to create a greeting card, after selecting the photo, the Greeting Card, I receive a pop up error message as follows:
"Valid Size Not Available For This Creation". (All other Create functions such as Photo Book, Photo Calendar, and Photo Collage appear to be working). I have been in contact with Adobe Support and have been instructed to do a number of things from creating a new preferences file to uninstalling and re-installing the PSE software, with no result. Has anyone else run into this problem, and if so have found a fix? Thanks.

I've been tearing my hair out over this one also. I've been on hold for over 10 hrs with Adobe Support waited over almost 2 weeks and still no resolution. I'm trying to create the Save the Date cards for my wedding and I can't wait for Adobe. Removing the preferences file and uninstalling/reinstalling does not fix the problem.
That said I did figure out a workaround for this. It's easy but it does require Windows. For me this was no big deal as I do own a Windows box.
Get the free trial version of PE9 for Windows and install it. If you don't have a Windows computer get to a friend that has one
Upload some of your photos to the PE9 Windows Organizer (it's identical to the mac version)
Select Create and then Greeting card. Photoshop will launch the guided edit feature for greeting cards.
Select the Layout feature and once you find out that you like save it as Photoshop project. Repeat this step for as many layouts as necessary.
Copy your Photoshop project files (and any folders) to your mac.
Open the project files as you would with any other Photoshop file.
You can now select the Create feature. You will be able add your pictures and resize them, you will be able to add/remove text, you'll be able to change the backgound/borders, add graphics...pretty much anything...EXCEPT automatically modify the layout. If you click on Layout, PE9 returns nothing. You can however go into full edit mode and if you have decent Photoshop skills you can make any changes to the layout manually.
If I had to put money on this I'd say that there is a problem with the PE9 Mac installation package. For some reason it is not deploying the layout data/files or it is not putting them in the right place. For this reason the program can't find the layouts when the user selects the greeting card guided edit.
Good luck.

Getting EDI:Partner profile not available.

Hi,
I am a newbie to SAP XI. As I am doing File to IDOC scenario, I am getting error - EDI:Partner profile not available.
My Scenario details:
1. Created RFC Destination, RFC port, logical System and Partner profile in both Sender (XI) as well as Receiver(SAP R/3) systems.
2. Created SWCV, Technical sys, Business Systems in SLD. I used the Logical system created (for SAP R/3) on XI system in my business system.
3. Created Data type, Message type, Message interface, Message Mapping and Interface mapping in Integration Repository and activated them.
4. Imported IDOC from SAP r/3 system during Namespace creation and used it for mapping.
5. used Integration Directory wizard to create Communication channels, Sender & Receiver agreements, Receiver Determination, Interface Determination.
6. Creaed a new business service for sender and added "Adapter Specific Identifier with Logical system created (for SAP R/3) on SAP XI.
7. Activated all Standard Change list items.
The file for the above Scenario has been picked up amd i am getting "Chequered Flag" on both ends in "SXMB_MONI" monitor. When i change over to SAP R/3 to check idocs created (i.e., T.code - we05) my scenario idoc status is 56 and it says.. Status; Idoc with errors added.
I have gone through many of the forum suggestions and blogs regarding this issue, but still not able to resolve my problem.
can somebody suggest me solution please.
Thanks,
Vijay.

Hi,
6. Creaed a new business service for sender and added "Adapter Specific Identifier with Logical system created (for SAP R/3) on SAP XI.
>>>Check this for Reciever Business System.. not for Sender system..
BTW, if you get chequered flag in XI, then idoc data is sent from XI. Can you check all the data from XI is populated in the idoc structure in SAP R/3 in we05...by clicking each segment.. if so, then there is no problem from XI..
check WE20 ..partner profile configuration in R/3 also check inbound parameters are given
Regards,
Moorthy

Partner profile not available.

Dear Folks,
i am doing the scenario JDBC to IDOC. For that i did all the necessary ALE settings and configured the systems. While executing that scenario. In we02, i am getting the error partner profile not available eventhough i configured it. From the error i found that, in technical info, partner number and port are different. And i am getting some Default parnter number and port.
From my observations, i checked the Sender business system and i found that, logical system which was mentioned for this business system is replicating as a default parnter number in the technical info.
please guys i need your valuable suggestions to eradicate this error.
Regards,
Dileep

Hi Mark,
I checked the payload and i am not using header mapping.
I tested the same by doing some modification like, In sender business system, i replaced the default logical system name with which i am using.Then idoc status is changed to status 50. But i am getting the Default port as previously said.
one more thing is , whenever i am getting this partner profile error, it is hitting one of my Company portals. i.e., displaying this partner profile issue in MSS(managerial self service) of HR Portal.
I was little bit confused of why it is hitting the portal?
what would be the key point for their connection?
Please help.
Regards,
Dileep

Lens Profile not available for old photos

Similar Messages

Maybe you are looking for