Lens profiles not showing up in cs6

I have cs6... the lens profiles are not showing up in either camera raw or photoshop. They are grayed out in the lens correction filter tab. any help would be appreciated.

Okay, I'm answering my own reply. I discovered the problem. It was the fact that LR was running in 64-bit mode. Apparently Epson's profiles are not set up for that...
So, if anyone has this issue, that is the answer. 64-bit mode was either selected as a default after upgrading to v2.5, or I perhaps selected it after reading Seth Resnicks' Lightroom book where he recommends 64bit for speed.
ed

Similar Messages

Lens Profile Not Showing Up in Lightroom 5.7

Despite the profile for a particular lens appearing in (what I presume to be) the correct places on my hard drive (see paths below), the lens profile does not appear in the drop-down within LR panel for Lens Corrections / Lens Profile. Other new Sony lenses (FE series) do show up but not ALL of them that are in either location (paths below). Weird. What am I missing?
The profile does show up in ACR 8.8. Similarly, Photoshop CC 2014.2.2 populates the profile automatically when I use Filter>Lens Correction but it just won't appear in Lightroom.
Background: CC subscriber, Lightroom 5.7.1, Win 8.1, 64-bit; I have restarted my computer and LR several times.
Profile that is not appearing: SONY (Sony FE 24-240mm F3.5-6.3 OSS) - RAW.lcp
I see it here:
C:\Program Files\Adobe\Adobe Photoshop Lightroom 5.7.1\Resources\LensProfiles\1.0\Sony
and here:
C:\ProgramData\Adobe\CameraRaw\LensProfiles\1.0\Sony
The camera (Sony a7ii) also appears in the related "Camera Profile" locations and it does show up in the "Make" drop-down in LR.
Thanks for any help,
Bill

Thank you.
Worked perfectly.
Bill

Lens Profiles not showing up (manual focus lenses)

I am trying to create profiles for a few manual focus lenses. The profiling process seems to go as it should and I create and save a profile. When I go to Photoshop > Lens Correction, however, the profiles I just created don't appear.
Clearly there is no EXIF data and I don't know if Lens Correction requires that in order to find appropriate profiles. The profiles I've created do appear in the proper folder.
Any ideas? What am I doing wrong?

Hey,
not sure if you resolved your Problem by now, but I just post this cause I did have a similar Problem that the profiles created didn't show up in CameraRaw.
I solved the Problem by altering the following line inside the profile:
<stCamera:CameraRawProfile>False</stCamera:CameraRawProfile>
Just replaced False by True et voila:
<stCamera:CameraRawProfile>True</stCamera:CameraRawProfile>
Problem solved for me
Hope this will help someone

My fonts are not showing up in CS6

My fonts are not showing up in CS6, but they are installed. How do I fix this?

Please provide some more detail. Are you on Windows or Mac? In which applications are the fonts not showing? And what do you mean by "not showing" (provide a screen shot if possible)?

Windows Fonts not showing in PhotoShop CS6

Newly built Windows 7 Machine, installed the fonts and they show in all office Apps but not showing in Photoshop CS6, can you tell me how to get them to appear?
Thanks

Photoshop lists all fonts that are present in 'Fonts' folder in Windows.
If PS is not listing some fonts:
Either those fonts are not located in 'Fonts' folders (Windows keeps it in a secret statsh as they're proprietary to Windows 7)
One or more of those fonts are corrupt. Adobe doesn't list corrupt fonts. In fact, often times Photoshop hangs when you have one or more corrupt/ invalid font registries on your system. Scan for corrupt fonts and remove them
Can you post the 'fonts' that are 'missing', so we can see if they have any associated known issues with Photoshop?

Elements 9 - Why does lens name not show up in photo info?

Why is the name of the lens used not showing up in the photo info? I have noticed this is happening with two of my lenses - Pentax-DA 35mm f2.4 and Pentax-DA L 50-200mm.

Please see below
SQL> create table test_ind( id number primary key) organization index;
Table created.
SQL> select count(*) from user_segments where segment_name ='TEST_IND';
COUNT(*)
         0
SQL> select * from user_tables where table_name ='TEST_IND';
TABLE_NAME                     TABLESPACE_NAME                CLUSTER_NAME                   IOT_NAME
TEST_IND                                                                                                            VALID
SQL> select constraint_name from user_constraints where table_name='TEST_IND';
CONSTRAINT_NAME
SYS_IOT_TOP_67764
SQL> select * from user_indexes where index_name='SYS_IOT_TOP_67764';
INDEX_NAME                     INDEX_TYPE                  TABLE_OWNER                    TABLE_NAME             TABLE_TYPE
SYS_IOT_TOP_67764              IOT - TOP                   SCOTT                          TEST_IND               TABLE

Lens profile not recognized by LR 5.3

At work, on a Windows 7 laptop, I used the Adobe Lens Profile Creator utility to make an LCP file for a Nikon 1 6.7-13mm zoom lens. After submitting that LCP file to adobe via email, I copied it to my Dropbox. At home, on my Mac OS X 10.8.5, I copied the LCP file from the Dropbox to:
\Library\Application Support\Adobe\Camera Raw\Lens Profiles\1.0\
Then I launched LR 5.3, navigated to a raw (NEF) image shot with this lens, and attempted to apply the lens correction in the Develop pane. Although the Library correctly shows the meta data for the lens and camera, the Lens Correction section in Develop does not even list that lenses LCP file in the drop down menu. Instead, LR attempts to apply a different lens profile which does not match the focal length of the zoom. I'm wondering if the LCP file that I created will only work on a Windows PC since that is where it was created? What other explanation could there be for this problem? Thanks for any advice...

Update - I stayed up late last night and re-ran the lens profile creator at home on my Mac OS X 10.8.5. Placed that LCP file in the directory I originally mentioned above (I overwrote the earlier LCP file created on a Windows machine), launched LR 5.3, and LR successfully matched the new profile with my lens.
Lesson learned - an LCP file created on Windows OS cannot be used on a Mac, and I assume, vice versa. In retrospect, this shouldn't be a surprise (but some other file formats appear to work on either). I wonder if Adobe translates user submitted LCP files from one platform to the other, so that downloads are offered to the community equally on either platform...

Lens Profiles not registering in Lightroom 4

I have a number of lens profiles that I have created with Adobe Lens Profile Creator and placed in the designated folder, but when I run Lightroom, they do not appear in the list.
There is an "index.dat" file under folder 1.0 that I suspect needs to be updated, but I don't know how.
I also added a Minolta folder since there was noe befor to place my Minolta lens profiles. This does not show either when I run Lightroom.

Rikk is correct. User created lens profiles should be put under the user specific lens profiles folders.
On Mac, put them under (note there is no space in the "CameraRaw" sub-folder) or any of its sub directories:
Hard Drive>Users>your user name>Library>Application Support>Adobe>CameraRaw>Lens Profiles>1.0
On Windows,
C:\Users\your user name\AppData\Roaming\Adobe\CameraRaw\LensProfiles\1.0
I thought ALPC will default to save to these user speficic locations.

Lens Profile not available for old photos

Hi
I got busy creating a lens profile for my Canon 550 and EFS 15-85 f/3.5-5.6 IS USM as there was no profile listed for this lens when I took some photos in early July. I now find that the profile is now available (for the photos taken in the last week or so) and automatically selected when I select 'Enable Profile Corrections' BUT is still not available for the older photos - can someone tell me how to get the new profile available for the older photos - in fact why does the list not show the new profile??

Thanks Ian
I do all RAW now but to get more photos on my SD card
used JPEG for a time.
Richard

Lens profiles not available in Lightroom CC

I have downloaded and installed lens profiles but they do not show in Lightroom CC as choices in the drop down menu? They were there for Lightroom 4 but not since I purchased and installed Lightroom 5 via the Creative Cloud?

I have downloaded lens profiles in an analogous folder on my computer and they work ok, so you're putting them in the right place, assuming you're logged in as user Michael.
The other thing is are the photos you're opening RAW or non-RAW, and is the lens-profile you're hoping to use for RAW or non-RAW, and is it for the same camera manufacturer (Canon, Nikon, etc) as your photos?

Printer/Paper profiles not showing up in Lightroom 1.3.1

I installed 2 new paper profiles from Red River over the weekend in XP Pro. Only 1 of them actually show up in lightroom to choose from. The one that can be selected works fine but I can't view the other one. I've tried uninstalled and reinstalling it. I can, however, see and select this profile in Photoshop CS and other applications. Lightroom seems to be the only one with problems. Does this point back to a red river problem or is lightroom picky about something I don't know?

I talked to LR today -- no help, told me to call Epson.
Epson advised me to go tp PRINT mode > RT menu > Print Job > Managed by Printer click this and choose other. Drop down menu appears and you can choose your profile. then back to print setting and the profile should show up there.
My profile did not show there -- I was advised that because I have Matte Black ink cartridge in the print that the Premium Luster will not show because PL will only print with Photo Black.
So I need to change the ink type and hopefully I will be able to print on the Prem Luster.
ope this helps you.

Lens Profiles not working in Lightroom 5.4?

I've got OSX 10.9.2, Lightroom 5.4, latest Camera raw, everything up to date.
When I "Enable Profile Corrections" for an image shot with a Sony a7r and Sony FE 55mm lens, it should automatically retrieve this profile:
/Library/Application Support/Adobe/CameraRaw/LensProfiles/1.0/Sony/SONY (Sony FE 55mm F1.8 ZA) - RAW.lcp
Well, it doesn't. The only Sony lens available in Lightroom's Lens Correction panel is "Sony DT 18-200mm." But there are several dozen Sony lense profiles in the "Sony" directory.
And more puzzling, the camera "Make" menu lists 8 manufacturers (Apple, Canon, DJI, GoPro, Nikon, Sigma, Sony, Tamron) but leaves out a number of others — Fujifilm, Hasselblad, Leica, Mamiya, etc.
And as with Sony, only one Tamron lens is listed.
I've tried re-installing Lightroom fresh, and no luck.
Photoshop works fine and has all the lens profiles.
Anyone else noticing this? Got a fix?
Irked in Cambridge,
Mike

I only shoot in RAW, and I am having this same issue. I shoot Nikon with a Tokina lens. This morning, Tuesday October 14, 2014, I had this setting. I closed the program and restarted it, and now I only have Apple, Canon, DJI, GoPro, Nikon, Sigma, Sony, Tamron lens profiles. There was not an update, nor did I actually change any settings. What is going on here?
I talked to customer support, whom suggested that I was stoned out of my mind because these profiles do not exist in lightroom. I did as the rep asked, followed the link and downloaded the "new" profile. Now I can't get it installed. Meanwhile, my photos are waiting for me to edit them. Can someone please help out here?!

Preinstalled filters from CS5 not showing up in CS6 upgrade

I just installed CS6 upgrade from CS5 but the Nik and Topaz software filters are not showing up. How do I get CS6 to recognize them without having to reinstall all of them again.

How do I get CS6 to recognize them without having to reinstall all of them again.
You don't. The behavior is as it always has been - Adobe apps never migrate legacy plug-ins and content to avoid compatibility issues. and you will probably need updated vertsions for CS6, anyway.
Mylenium

ECP CI Start and Instance Profile not showing in RZ10

Hi,
I am not able to access or view our ECP Central Instance Start and
Instnace profile for ECP CI Instance in RZ10 , I do not see the start
and instance profile for ECP CI Instance. However, I do see start and
instance profiles for APP1 and APP2 instance, but just not CI instance.
So, when I try to re-import the profiles I get the below error message.
I wanted to check if it is access related, so, I logged on the the ECP
CI Server physicall and had tried to accessed the ECP
CI Server and try to access the below path from start --> run -->
SAPGRPPRD\sapmnt\ECP\SYS\profile\ECP_DVEBMGS02_ECC-Prod-CIS and
SAPGRPPRD\sapmnt\ECP\SYS\profile\START_DVEBMGS02_ECC-Prod-CIS and it
works. But the profiles are not being read
From ECP CI RZ10. Can you please advise why this is not showing.
Error Message when i try to import the profiles:
Log for the import of profiles
Instance profile
SAPGRPPRD\sapmnt\ECP\SYS\profile\ECP_DVEBMGS02_ECC-
Prod-CI Could not be read. The import is therefore not possible.
Start profile
SAPGRPPRD\sapmnt\ECP\SYS\profile\START_DVEBMGS02_ECC-
Prod- Could not be read. The import is therefore not possible.
Instance profile
SAPGRPPRD\sapmnt\ECP\SYS\profile\ECP_DVEBMGS02_ECC-
Prod-CI Could not be read by file; Therefore could not be checked.
(Server = ECC-Prod-CIS_ECP_02 )
Please advise?

Hi,
I logged on the the ECP
CI Server physicall and had tried to accessed the ECP
CI Server
as per above statment you have login to CI and try to call CI proifle file manually. then can you tell us why this both the host name are different.
SAPGRPPRD
ECC-Prod-CIS
Thanks
Anil

Icc profile not showing up in Photoshop

hi- I downloaded an ICC profile from an online printer that I want to use in Photoshop CS3 so my images appear properly for their output. I placed it in Library/Adobe /Color/Profiles and restarted Photoshop but it does not show. What am I doing wrong?

Ramon look, if it says the downloaded ICC profile is shortrunposters.icc and you place it in the folder listed as such and it appears like that when you look at it in the folder and then when you go to the actual profile list (which happens to be over 100 profiles) and you don't see shortrunposters.icc where the heck are you supposed to look and what are you supposed to look for?
It turns out it is Xentilcle version3.icc now how would I or anyone else know that? The creator of the profile originally said "you need to go to an Adobe site to find out the problem because it isn't us", well excuse me I think it was their lack of identification of how the profile shows up.

Lens profiles not showing up in cs6

Similar Messages

Maybe you are looking for