Lens Profiles - Search Online greyed out

Hello,
I was looking for more lens profiles within Photoshop CS5 and I noticed that within the "Lens Correction" window under "Lens Profiles" the "Search Online" button is greyed out. I am looking for more Canon lenses.
1. Why would this option be greyed out?
2. Where can I go to get more Canon Lens Profiles?
Thanks,
Dave.

@simonsaith
That helps to understand what is going on, I checked my images in Bridge and under "Lens" in the EXIF information there is no data, so this makes sense.
I just took some experimental shots and Bridge verifies that is has the Lens data. I pulled them into Photoshop Lens Correction and the "Search Online" button is now available.
I am not sure why it did not see the lens data before and does now. Perhaps it is because I recently ran the Canon EOS Utility and registered the Lens Peripheral Illumination Correction data with the camera? I am not sure.
Thanks for your help on this!
Dave.

Similar Messages

Lens Profile Vignetting Slider greyed out

For lens correction of Sony RX1 images, only the distortion slider is available, and the vignetting slider is always greyed out. Is that normal?

Thanks Jeff,
You are absolutely right.
I thought I had upgraded properly, but I had not.
Ran the updater again, and success.
Thanks again.
Steve

Camera profile tab suddently greyed out

Went to use LR just now and the camera profile options are greyed out. Anyone else experience this? I'm using 5.7 and OSX 10.10.2
I've never seen this disabled ever.

You're quite correct that both operating systems have problems. To offer my story, I had used Windows exclusively since 1993. I'd wanted a Mac at that time but they were SO much more expensive than the Windows 3.1 machines, and I wanted a larger monitor so was quite proud of my NEC monitor at that time.
I wasn't able to acquire a Mac until 2.5 years ago. I'd planned on switching over entirely to the Mac but I soon discovered the "joys" of having two systems on in front of you at once! I soon began to prefer all of my photo editing work on the Mac, partly because my Windows 7 machine is much older and slower. I can tell you that during this two years my Mac has crashed on three times, when it became unresponsive. I had to restart without saving but when it rebooted (which takes about 20 seconds) everything was fine. My Windows 7 machine, on the other hand, has crashed many times, and had many more problems where it would not boot, or would not shut down and I simply would have to cut the power and try and do a system recovery. I'm a "power user" so I am not uneducated about how to maintain a Windows computer. The Mac just works so much more reliably. I AM NOT an Apple freak. I do not use an iPhone (I prefer Android) and I am not planning on acquiring an Apple Watch. BUT I do know a good operating system and hardware when I see it, and my Mac is one smooth operator.
Sorry for going on about Mac/PC in the wrong forum, but we sort of touched on it.

Windows Deployment Service. Network Profile Radio Buttons greyed out with R2

Hi All
I have downloaded and setup Server 2008 R2 (not yet activated). I have added the following roles "DHCP Server", "DNS Server", "Active Directory Domain Services" and "Windows Deployment Services". I can PXE boot a test client machine and (using the boot.win from windows 7 dvd) multicast a XP Image to it. This setup is connected via a 100 Mb switch and is an isolated network.
Under windows deployment services - if I right click my server - select properties - network tab "Network Profile is greyed out". I have tried running wdsutil /Set-TransportServer /Server:big /Profile:100Mbps but get the following error message: "Windows Deployment Services Management Utility Version 6.1.7600.16385. Error code 0xC110011F This WDS transport server does not support network profiles.
I have tried this on two hardware setups:
An Intel D915GUX 3GHz 2GB RAM and Marvel Yukon 88E8050 ethernet controller.
An Intel D965 Core2Duo 1.86GHz 2GB RAM and Intel 82566DM Network controller.
Incidently I have done the same setup with Server 2008 (not R2) on the D965 and the Network Profile radio buttons are not greyed out. If I upgrade the same test machine to server 2008 R2 the Network Profile radio buttons are greyed out. Is this a design change, does Server 2008 R2 no longer support network profiles as I am now unable to select 10 100 or 1000 Mbs ?
If more information is required or if anything needs further detail please let me know.
Thanks for any help.
Liam.D

Is there any way at all to manually set or control the network profile? In my environment, a SCCM\WDS multicast stream is bottoming out on speed and network utilization when the stream crosses a Nexus 7009 router. Speeds go from 200 Mbps to 20 mbps. I have
a theory that this "new" automatic configuration is placing the clients in a slow network profile that are on the opposite side of the router and I have been unable to find a way to speed of the transmission. I have also ruled out the "master
client" slowing down the stream buy using different clients only connecting to a stream 1 at a time. I have also ruled out the router as the source of the problem by having a VLC client listen to the multicast stream on the same side of the router as
the slow clients. The VLC client (unknown to SCCM\WDS) was able to receive the transmissions at 20 % utilization / 200 Mbps.
-Tony

PLAY button and search bar greyed out

Hello! I've had an issue the past couple of days where my play bar and the search bar are greyed out. I can still play music, and pause it by clicking next to the track currently playing, but the main controllers at the bottom do not work. This persisted through the update I just ran on Spotify, updating it to the most recent version, 1.0.2.6.g9977a14b. See attached image for how this looks in my client. I have a premium subscription if that makes any difference, and as said, I can still play music. Thanks for the attention,Nuala ETA: And of course another update gets pushed out after I post this message, and I now have a functioning play button again. Never mind this. :)

Hello:
Fantastic glad it got fixed with an update. Rock on \m/

Search options greyed out in generate

When we generate the layout, the checkbox for 'Search Input
Field in Toolbar' is disabled in the Additional Options pane.
Does someone know why this is and how we make it available.
We are using Robohelp X5 and generating Webhelp

Hi M@RG and I too welcome you to the forum
Believe it or not, this could be the result of a selection
you don't make in the screen
after this one. Click the Next > button and see what your
setting is for the "Navigation Pane Preferred Format". If you have
it set for "Pure HTML", this could explain it. So set it for one of
the other options and click the < Back button to see if it's now
enabled.
If that didn't work, sometimes things like this happen with
no obvious reason. One thing you might try is to right-click the
Single Source Layouts pseudo folder and declare a brand new layout.
Then see if anything changes.
Cheers... Rick

When searching Google Images with FireFox, the first page of images are visible in thumbnails but all subsequent pages are greyed out.

This happens every time on a Google search. Greyed-out thumbnails will show individually if double-clicked. Every page of images after page 1 experiences the same problem. Reload does not help.
Is this a Google problem or a Firefox problem?

Doc: I've had a similar experience, and here are the details, investigation, and a workaround. My printer is a Brother MFC-645CN, and I'm using Snow Leopard (10.6.8) on a 2010 iMac quad i5 connected to the printer over my ethernet LAN. Are you using a Brother printer?
Firefox has shown this kind of nasty issue for the past six months or so. It seems to be related to the imaging algorithms in Preview when dealing with Firefox (now at v.12) and the Brother printer -- the screwy second page (and beyond) show up skewed and up-sized when doing a print preview also. No such problem seen in Safari or anything else. I am not currently using any other Mozilla apps on this Mac besides Firefox.
A few months ago I tested printing from my administrator account and a different user account. Firefox printing was completely normal and as expected. When I went back to my main user account, back came the funky second page.I went through extensive troubleshooting to try to chase it down, systematically removing and replacing apps and preferences and many other Library files related to printing, Brother drivers, Firefox, and Preview. Nothing helped. Solution was to migrate my user files to an account where the printing problem wasn't happening. I deleted the problem user account.
Everything was fine for about three weeks, and then with no warning, printing was back to the bad second page, just as before. I am stumped, and I'll let smarter people try to figure it out. I use Firefox a lot, and it's possible that some add-on setting is interfering, or a web page I visited turned the printing funky again. I just don't know.
Also checked on a Mac G4 running Leopard (10.5.8) and Firefox 3.6.28. No printing/preview problems there.
Now, for the work-around I am currently using -- print each page separately, one at a time. Page 1, then page 2, etc. Preview and printing looks completely normal. Hope this works for you until the bug is located and squashed for good.
Glenn

Want to grey out (Non-editable) field in Additional Tab in Header of ME21N

Hi all,
i've got a requirement to grey out the field(Non Editable) of header tab in ME21N.
Can anybody tel me the solutions.
Rgds,
Spandan

Question asked again, and again, and again, and again. Search for "grey out" (and please read forum rules as it seems you didn't)

Is it distance from my router than causes a greying out of web sites

the router that gives wirelessness to my desktops is about 50 feet and in another room
from my bedroom. the web page listings of any search are greyed out and are not
workable.
Is there a distance issue here?
cant be cos i also use cellular data which shows up on the upper left with 4 bars
and still the pages are locked, cant be clicked on
any ideas whats going on
the ipad2 32 GB with 3G

Try clearing Safari's cache : Settings > Safari > Clear Cache (and Clear History)
If that doesn't work then try closing Safari completely and then re-open it : from the home screen (i.e. not with Safari 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Safari app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
A third option is a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

Where is the online database of lens profiles

How do I find out which profiles have been downloaded by individuals for lens profiles? Do I have to be within Camera Raw, or within Photoshop CS5(please state which) and hit "search online database" at the bottom of the menu? Please explain.
Thanks.

Thank you Dorin, you are absolutely correct and I did the search database from CS5,
Thanks,
Debra

Can't search for lens profiles

Hi everyone. Maybe this is the wrong place for this postsince it's not directly related to the LPC but I thought I'd ask anyways. I have CS5 32bit on both my desktop and laptop computers (both run Win 7 64 bit). On my laptop, in the Lens Correction filter, I can click on the Search Online button and it finds a few more profiles. On my Desktop, the search button is disabled. I can't seem to figure out why. Any help you can provide would be great. I plan to start creating my own lens profiles but want to be able to leaverage the work that others are doing by searching online.
Thanks,
Steve

Check out http://forums.adobe.com/thread/629199?tstart=0 . BTW, your input image's camera/lens EXIF metadata is shown in the bottom/left corner of the PS LC dialog. If you see "--", it means the EXIF data is missing.

When using private browsing to view image results in Safari 5.1.3, only the first two rows of results are visible, the following four or so rows display greyed out place holders, and the safe search button is inoperable. Suggestions?

When using private browsing to view image results in Safari 5.1.3, only the first two rows of results are visible, the following four or so rows display greyed out place holders, the remainder of the results page is blank, and the safe search button is inoperable. When I turn off private browsing and refresh the page, everything works again.
Anyone else having this problem?

I have got the same behaviour after the last Safari Update to 5.1.3. It seems that Safari now handles some scripts in a new way. If you debug the Google Website, you will see, that there is some Javascript Error, that seems to prevent to write into local cache. After some searching I wasn't able to finde a solution for this problem, other then disabling Javascript while private browsing to prevent the script loading. You then are able to use Google with the old layout. The option to disable JavaScript can be found in the Menu "Developer", wich has to be enabled in Safari in the options first.
In my opinion this is a bug that is now occuring, because Apple changed something in private browsing and that has to be fixed by Google now, to run again. Or we will have to wait for 5.1.4, as you can read online Apple will change and bugfix the javascript engine in that version, perhaps this fixes the problem as well. I hope so!
If anyone is in the developer program perhaps you could test this with the beta of 5.1.4 and tell us if it works.

How do I Import Bookmarks from one profile to another ? I have tried searching online but I can find no "bookmarksbackups" folder and no "places.sqlite" Thanks

Hi,
I was wondering how to Import Bookmarks from an old firefox profile to a new one ? My laptop stopped working but I managed to copy my firefox data from the mozilla appdata folder. I want to now copy my old bookmarks to my new firefox profile on my new laptop. I have tried searching online for guidance but most methods mention a "bookmarksbackups" folder and a "places.sqlite" file. However, I can find no "bookmarksbackups" folder and no "places.sqlite" file. Among the files in profile I am trying to import FROM are a "bookmarks" html file(which seems to only contain the default firefox bookmarks) as well as "places.sqlite-shm" and "places.sqlite-wal" files. Although, the NEW profile on my new laptop I am trying to import TO DOES have a "bookmarksbackups" folder and a "places.sqlite" file.
I would be most grateful for any help received. Many thanks in advance for your help and for your time

''the-edmeister [[#answer-668475|said]]''
<blockquote>
f458italia,
Per your screenshot - you don't have the /bookmarksbackup/ folder nor the places.sqlite file - your bookmarks don't exist in that old Profile. ''cor-el mentioned another file that is missing, so that Profile wouldn't have been operational.''
Are you sure that you don't have another Profile for that user account?
beemarco,
Sorry that we missed your question over here:
https://support.mozilla.org/en-US/questions/1036975
I'll provide an answer for you in that thread.
</blockquote>
'''Thank you for your reply. If my bookmarks etc. were to unknowingly be saved in another profile how could I find/access this profile? Many thanks in advance '''

HT1688 On my iphone 4 below the search window, I have three greyed out safari icons with different web links attached

I have a iPhone 4 8GB. I have three greyed out safari icons that doesn't say safari but a web link. It's like a bookmark to your homepage but not in your homepage. I noticed it when I deleted all my web pages and on that one web page where it says "search or type in a address" right below it where it's just all white, there's three grey looking safari icons with each one with a different web site that's attached to it. When I tap on it it goes to a specific website. For ex one if them says www.longchamp.com, the other macys.com. There's no way to delete it. The wired thing is each one in color it like three shades of grey . Light, med and darker grey icons. When I hold down the icon you can move it around but can't delete, nothing just nothing. It's been there for the longest time I can remember. Do you know what this is? I took a pic of it. I don't know how to attach it to this discussion. Thank you for your patience and understanding.

I seem to have fixed it by putting <div class="clearfloat"></div> after the navigation bar?

After doing a Google search, I click on a link and go to the searched web page. When I go back to the Google page using the back button the links I originally clicked on no longer show as "greyed out". Any idea what is going on with the browser?

After doing a Google search, I click on a link and go to the searched web page. When I go back to the Google page using the back button the links I originally clicked on no longer show as "greyed out". Any idea what is going on with the browser?

Type '''about:config''' in the Location (address) bar and press the "Enter" key. When you see a warning, click '''I'll be careful, I promise!''' button.
* Preferences that have been modified are shown as '''bold (user set)'''.
* Preferences can be '''Reset to the default''' or changed via the right-click context menu.
-> In the '''Filter bar''', type '''browser.sessionhistory.max_entries'''
* Right click the preference '''browser.sessionhistory.max_entries''' and click '''Modify'''
* Change value from 0 to whatever you want over 0 (Default value is 50)
* click OK
-> Close the '''about:config''' tab and then Restart Firefox.
See this post:
* https://support.mozilla.com/en-US/questions/860894#answer-229574
Check and tell if its working.

Lens Profiles - Search Online greyed out

Similar Messages

Maybe you are looking for