LensBlur and Depth Map issue

Ive posted on this topic before....
Im trying to use a depth map to simulate a focus pull on a shot.
Its entirely CG so I have been able to use a depth pass for use with lens blur.
As you can see from the image using the effect works on the middle image but when I adjust the focal dictance the blur only works within the confines of the depth map 'edges' creating a hard edge rather than a soft one.
I have pre-composed the depth map layer on its own and made the lens blur plug-in use this but I cant get what I need.
I also tried a version where the RGB passes of the CG were precomposed before adding the depth map. Made no difference
It seems that the focal distance is great....if you only want the BG out of focus.
I cant believe that Im stuck with that, so what am I doing wrong?

Thanks Mylenium
Shame the developers cant find the time to fix stuff before releasing loads of new features

Similar Messages

EA4500 – Smart Wi-Fi interface and Windows Network Map issues

I purchased this Router about 2 weeks ago as a phased upgrade of our Home Network, primarily to enhance media streaming. It has the latest firmware preinstalled from the factory. Prior to the purchase and installation of the EA4500 Router I replaced my old Motorola SurfBoard SB6120 DOCSIS 3.0 Cable Modem with a Motorola SurfBoard SB6141 DOCSIS 3.0 Cable Modem. My old Linksys E2000 Router worked perfectly with the SB6141, with the exception that the E2000 wasn’t IPv6 enabled, but does have 10/100/1000Base-T Ethernet (RJ-45) and Internet ports.
The EA4500 has been installed for about 10 days and seems to have improved local network speeds and I don’t seem to be having any Internet connectivity issues. However, there are some disturbing issues with the EA4500 and the AE3000 I purchased. There are 11 devices connected through the Router; a Dell Desktop (wireless with the AE3000), a Dell Desktop (Ethernet), a Dell Laptop (wireless), 2 Canon Printers (1 Ethernet and 1 Wireless), 2 Western Digital 1TB MyBookLive Network Drives (both Ethernet), a WD TV Live Streaming Media Player (wireless), an Apple TV media player (wireless), an iPad (wireless), and an Android Smartphone (wireless).
Issue 1 – The Linksys Smart Wi-Fi interface appears to be unreliable at times!!! I’ve read about this problem here on the Community involving the EA6500, so I don’t know if this is a Linksys Server issue, as suggested in a few responses, or a bug in the Router firmware, or defective hardware. However, when the interface locks up, it can’t be accessed from a wireless or wired connection. Usually, powering down the Router and then powering it back up and restart will allow it to function again. However, at times before the interface completely locks up it shows either just a white screen or the security screen will show no firewall features enabled. This is a little scary, so I’ll do a complete reset and setup; this is becoming a pain in the rear!!!!! Is there any hope for this being fixed, in this Router, not the next generation??????????
Issue 2 - All of my network devices show up in the Router’s Device List. Except for the Apple devices they also show up, when they are online, in Windows 7 Explorer under Network and when you click on Network they are correctly displayed as Computers, Media Devices, Network Infrastructure, or Storage. However, when you click on “Open Network and Sharing Center” and then click on “See Full Map”; it fails with the response “Windows cannot create the network map. Responses from other devices on the network are delayed or there is an incompatible router on the network”; no device map is shown. When I follow the link for more information, the only thing that stands out is “A device on the network, such as a hub or switch, is not working properly or is not compatible with the Link Layer Topology Discovery (LLTD) protocol, which Windows uses to create the map. To fix this problem, disable the device, turn it off, or remove it from your network”. All of my network devices showed up on the Network Map with the old E2000. This issue is the same on all of my computers, either wired or wireless. Any known solutions for this, or is it as Windows suggests; an incompatible Router????
Thanks in advance for any insight or solutions. With the issues I’m having with the EA4500 and the AE3000; they are both probably going back to Amazon.

thebluemamba_24; Thank you for your suggestion; I finally found time yesterday to perform an extensive evaluation before I return the Router. However, rather than trying to add devices manually, my rationale was if the EA4500 can’t process them correctly, automatically, it needs to be returned anyway, so I added devices normally letting the device an Router handle the process.
In thinking through this issue, all devices on our network are detected and identified by Windows Explorer on Windows 7 computers; except of course the Apple and Android devices (Apple TV, iPad, and Smartphone). So, I wondered if one of those three devices being added to the Router’s device list was somehow causing issues or interfering with Windows 7’s ability to generate a Network Map. Therefore, my approach was to turn off or disable all devices on our network, reset the Router to factory defaults, reestablish the Router to my custom Home Network configuration using a Windows 7 PC that has LAN and Wireless access to the Router, then add one device at a time and check with each addition to see if Windows 7 could still generate a Network Map.
With the Router reset and reestablishment complete; I began the process of adding one device at a time and checking to see if a Network Map was being generated. What I discovered was when a recent addition to the network, a Western Digital WD TV Live Streaming Media Player, was connected (wirelessly), Windows 7 could no longer generate the Network Map and the failure was consistent. The only way to get the Network Map to work again was to remove power from the WD TV Live, although it remained in the EA4500’s Device List; simply turning it off didn’t help. Since I’d originally witnessed the Windows 7 Network Map working with the Linksys E2000 Router that the EA4500 replaced, I decided to test the WD TV Live with that Router. It worked initially, but it failed consistently after the first success. Interestingly, the failure indication was a little different, but nevertheless generation of the Network Map failed.
I’ve tried changing a few settings on the EA4500 as well as the WD TV Live, but nothing helped. There was a recent firmware update to the WD TV Live, so I might try rolling back the firmware to see if it makes a difference.
The Network Map issue might very well be an issue with the WD TV Live, not the Router, but after reading many threads on this Community I have reservations that the problems I’m experiencing with the Smart interface lockup will be fixed. I suspect new emerging replacement products will be the focus and these older products will be abandoned and no more firmware fixes will be forthcoming and I don’t want to spend more money for a new product just to fix old problems and get something that works properly. The Network Map issue is troublesome, but the lockup of the Router’s “Linksys Smart Wi-Fi” interface is a serious matter to me. It appears that once it locks up, the only way to correct it is a power off restart; not practical if you’re traveling and trying to access settings remotely; the selling point for this feature.
Given the problems I’m experiencing with the EA4500 and AE3000, I guess I’ll return them. Too bad, because otherwise the EA4500 seems like it’s a good Router. I’ve been brand loyal since the Linksys WRT54G came out, but after reading this Community and with my personal experience with the EA4500 and AE3000, now I’ll probably give the NETGEAR N900 equivalents a try.

Credit memo and MAP issue

Hello Guru's
I have 2 issues, and i am unable to understand the system logic for the same
Issue 1:-
We have an Intercomapny scenario
sequence of transaction is as follows
1. Create Return purchase order (document type NB) - Intercompany purchase
2. Post return goods receipts - movement type 161
3. Post credit memo with respect to return purchase order
4. Cancel the movement type 161 - using 161 movement type
System allows me to cancel the document created using 161 movement type
Step 4 should not be allowed but system is allowing me to do so, please advise how to stop this
Issue 2:-
I have a strange MAP issues which is flactuating very drastically
the scenario is as follows
Store stock is 10 ea, stock value is 1000, MAP is 100
DC map is 25
When we make return STO from store to DC, ths stocks are issued at DC MAP (condition type P101)
Assume we issue 9 quantity from Store then
Store stock is 9 ea, stock value is (1000-(25*9)) = 775, MAP is 775/1 = 775
This transaction is causing major flactuation in store MAP (100 changed to 775)
Please advise if there is any way we can control this behaviour
I understand that there is a setting which will in case of major MAP changes will put the amount into PRD account.
Appreciate if you can guide me to help
Regards
Amit

Hi,
For your first scenario,
for a retun po of IC NB type, after creating the PO you need to deliver the same at VL10G. For the delivery system will allow to create the PGR . Prior to these steps you need to return the goods using 161 at MIGO.Please check this 161 stock posted to stock in transit.After PGR system will clear the stock in transit.
Now after claring the stock from transit try cancelling the MIGO 161 document.
For the second query,
Please review your question' When we make return STO from store to DC, ths stocks are issued at DC MAP (condition type P101)
Assume we issue 9 quantity from Store then
Store stock is 9 ea, stock value is (1000-(25*9)) = 775, MAP is 775/1 = 775
This transaction is causing major flactuation in store MAP (100 changed to 775),
Please review the third line.
Regards,

Newbie: can't get lens blur depth map to work?

I watched a tutorial on lens blur with depth map. It looks simple. Here's what I did:
create a text layer with text from to to bottom
create a solid layer with a ramp and make it not visible
apply lens blur to the text layer -- this immediately blurs all the text
change the depth map on the lens blur to the solid layer with a ramp - nothing interesting happens.
The text are equally blur (or not blur) from top to bottom.
I tried puttting the lens blur on an adjustment layer above the text layer with the same result.
What am I missing?
Here's the file (74K bytes)
http://dl.dropbox.com/u/55756213/lensblur.aep
I'm using AE cs4 on windows 7 64 bit.

Put the solid with the ramp into a separate comp. Nest the comp in the main comp, and use it as the depth map.
You have to do that because AE processes things in a certain order.

XSLT mapping issue in parent child relation

Hi Guys,
i have one XSLT mapping issue. Mapping scenario is from IDoc to file.
IDoc structure is as below
<ZLOIPRO1>
<E1AFKOL>
 <A></A>
 
 <E1RESBL>
 <MATNR>1</MATNR>
 <CHARG>1</CHARG>
 <ZSBL>
 <MTART>ABC</MTART>
 </ZSB>
 </E1RESBL>
 <E1RESBL>
 <MATNR>2</MATNR>
 <CHARG>2</CHARG>
 <ZSBL>
 <MTART>ZHA1</MTART>
 </ZSB>
 </E1RESBL>
 <E1RESBL>
 <MATNR>3</MATNR>
 <CHARG>3</CHARG>
 <ZSBL>
 <MTART>ZHA1</MTART>
 </ZSB>
 </E1RESBL>
</E1AFKOL>
</ZLOIPRO1>
As you can see 'E1RESBL' is repeatative. Now my issue is i need to select 'MATNR' and 'CHARG' from 'E1RESBL' segment when first occurance of 'ZSBL/MTART' with value 'ZHA1' appears. i.e. my output would be MATNR = 2 and CHARG = 2.
I hope i am clear. Please let me know if any solution for this.

Hi,
Try this
<xsl:if test="./ZSBL/MTART == 'ZHA1'">
<xsl:for-each select="./E1RESBL">
<MATNR>
 <xsl:value-of select="./MATNR"/>
</MATNR>
<BATCH>
 <xsl:value-of select="./CHARG"/>
</BATCH>
</xsl:for-each>
</xsl:if>
You might need to do some changes in the above.
Thanks,
Prakash

Problem install ovi store and ovi maps?

my phone nokia C7 can not turn on, then I use a three finger salute to hard reset, and my phone can turn on again, but social networking application, ovi store and ovi maps are lost, I tried installing again, but always "unable to install", while applications else could, what happened? what should I do? I want to install it again.

Unfortunately that is one of the outstanding issues with the current firmware in the N8, E7 and C7. The hard reset does not reinstall Qt which is required for the apps you mentions. See this.
/t5/Nseries-and-S60-Smartphones/N8-Maps-problem-after-hard-reset/td-p/783327
Although it is possible to reinstall Qt, the process is highly complicated and should only be atempted by expert users. My suggestion would be to either get your phone reflashed at your local Nokia Care Point or to wait for the next firmware up[date which will hopefully include a fix for this.

Custom fields mapping issue of sales order replication from R/3 to CRM

Hello Experts,
I have to replicate sales orders from R/3 to CRM system (Initial and Delta)
The issue is I have custome fields in R/3 which are maintained in custom table(Z table) in R/3.
We added those custom fields in CRM customer_i table to synchronise with R/3 data.
To MAP R/3 custom fields to CRM custom fields, i have the following customization.
1. Added the custom function module in the event CRMO_200 and moved all the custom fields into interal table IT_OTHER_INFO.
2. The intrnal table IT_OTHER_INFO with data is passed into CRM standard function modules.
3. But in CRM the BADI 'CRM_DATAEXCHG_BADI' implementation does not have the input parameter of internal table TI_OTHER_INFO.
All my custom data is in internal table TI_OTHER_INFO.
Please suggest where can i map this data to CRM enhanced fields.
Regards,
Umashankar.

Hello Vanessa,
Thank you so much for your reply.
I went through the Note (1053817). It is good. I understand that the custom fields should enhance in the BAPE_VBAP in R/3.
My Scenario:
Goal: Orders replication from R/3 to CRM along with Custom fields.
In R/3, all the custom fields are maintained in Z table (Not VBAK or VBAP).
All these custom fields are belongs to Item level.
In CRM, The custom fields are maintained in CRMD_CUSTOMER_I table though AET.
I need to MAP these custom fields to CRM while order replication from R/3 to CRM.
Regards,
Umashankar.

Mapping issue in idoc to JDBC scenario

mapping issue in idoc to JDBC scenario
source structure
E1KNB1M
BUKRS = 1000
E1KNB1M
BUKRS= 9000
E1KNB1M
BUKRS= 2000
THE NODE E1KNB1M is repeated many times and the field BUKRS is also repeated with E1KNB1M as above
TARGET field : ISFRANCHISE
if any where value of BUKRS =9000 we have to pass Y to the target filed, else N
if BUKRS = 9000   THEN ISFRANCHISE= Y
               ELSE
            ISFRANCHISE=N
I've done the mapping as below
BUKRS = 9000--> IF THEN Y ELSE N--
> ISFRANCHISE
BUT everry time the target value is N only
pl suggest
rgds
mojib

mapped like this
BUKRS--->SORT---->
                                             EQUALS --------IF---THEN    Y
9000------------------------>                                               ----------------->ISFRANCHISE
                                                              ELSE   N
context of BUKRS set to parent node
its worked
thanks to all for valuable suggestions
rgds
mojib

Soap Fault mapping issue

Hi,
I have a synchronous scenario of (request) Proxy --> XI --> SOAP and (response) SOAP --> XI --> Proxy. I am having an issue returning the application soap faults back to the sender system. When I enter invalid data while testing this webservice call with a soap client directly without XI I get a soap fault response:
<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
 <soapenv:Body>
 <soapenv:Fault>
 <faultcode>soapenv:Server.generalException</faultcode>
 <faultstring>Login failed</faultstring>
 <detail>
 <LoginFault xmlns="NAMESPACE">
 <exceptionCode>710</exceptionCode>
 <exceptionMessage>Login failed</exceptionMessage>
 </LoginFault>
 <ns1:exceptionName xmlns:ns1="http://xml.apache.org/axis/">NAMESPACE</ns1:exceptionName>
 </detail>
 </soapenv:Fault>
 </soapenv:Body>
</soapenv:Envelope>
When testing this through XI, the response message after the Soap call is returning the following soap fault in XI payload:
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>

<LoginFault xmlns="NAMESPACE">
<exceptionCode>710</exceptionCode>
<exceptionMessage>Login failed</exceptionMessage>
</LoginFault>
Notice just the detail body exists in the payload instead of the soap evelope and body, which I read is stripped off within XI in the case of application errors. I have setup a fault message mapping to tie the wsdl login fault with the standard fault message type and included this in the service interfaces and operations mapping. When the soap fault happens within XI I am getting the following mapping error:
NO_MAPPINGPROGRAM_FOUND: Mapping program is not available in runtime cache:
I am expecting the fault mapping to be executed in this case but doesn't seem to be found. Any ideas why this mapping error is occuring and not being directed to my fault message mapping? Is the mapping expecting the soap envelope and body to be included in the payload?
Any suggestions would be appreciated.
Thanks,
Nate

Here are the errors I am seeing within the sxmb_moni transaction:
Call adapter exception:
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="MAPPING">NO_MAPPINGPROGRAM_FOUND</SAP:Code>
<SAP:P1>Object ID 35F8008AA0A830FC93FC221572A15ABD Software Component DC6FB8300EDE11DC8E05DB6DA3E77028</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:Stack>Mapping program is not available in runtime cache: Object ID 35F8008AA0A830FC93FC221572A15ABD Software Component DC6FB8300EDE11DC8E05DB6DA3E77028</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Response Message Error:
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>Application</SAP:Category>
<SAP:Code area="UNKNOWN">APPLICATION_ERROR</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText>application fault</SAP:AdditionalText>
<SAP:ApplicationFaultMessage namespace="NAMESPACE REMOVED">LoginFault</SAP:ApplicationFaultMessage>
<SAP:Stack />
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
and response message payload:
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <LoginFault xmlns="NAMESPACE REMOVED">
<exceptionCode>710</exceptionCode>
<exceptionMessage>Login failed</exceptionMessage>
</LoginFault>

Images and image maps do not respond to events on Safari

Hello everyone,
We have been experiencing issues with events not responding to images associated with image maps, on Safari browser. After the DOM is loaded with new image and corresponding image maps, events such as mouseover and click observing this divs do not respond or get triggered. DOM seems to be updated correctly but behaves differently (and it works correctly in all other browsers except Safari).
This behaviour is only noticed in Safari browser running both on Windows and Mac. (Tested on Safari Version 3.1.1 on running on Windows and Mac)
For you all to have a closer look at this issue, I have created a sample that has this problem, similar to one we experienced during one of our recent projects. Please click on the link below to get to the sample (I recommend you to try this either in Firefox or IE before you do on Safari)
http://www.hivegroup.com/safari/test.html
(In the above sample,
- the javascript code initializes the DOM with image and image map
- assigns two event listeners to the div containing this image and image map
- when mouse pointer brought over the image, it shows the area id in the 'mobox' div
- when clicked, DOM is updated with a new image and new corresponding image map, assigns new event listeners and should continue with the same kinda behaviour it did for the first image (but doesn't in Safari browser))
All inputs on this issue are welcome and greatly appreciated.
Thanking you in advance.
Regards,
Shashi.

Let me explain what the pink area is. Like the first image that contains two white boxes, the pink area (as you call it) is a new image (containing four pink areas or boxes having an area id denoted to each) that imgDiv occupies after the 'click' event occurs.
Yep, i gathered that from seeing it work on firefox...
The point that I'm trying to make here is, there shouldn't be any difference in behaviour when imgDiv holds first image (two white boxes) or the second image (four pink boxes) that you get after we click on image or the third image (containing 6 boxes, multiple colors) which you won't be able to reach in safari browser.
well... I can reach them, but only via the blue space.
. We'll notice change in the red box displaying target id only when we mouse over a new area that is not currently being displayed in the red box.
except in webkit for safari 2, where thered bpx content sticks at whatever it was when the first image was clicked, unless mouse is moved to the 'all area', and then it sticks on imgdiv.
I completely understand what you see in safari 2. But are you saying there's some error in my script ? If so could you please point out and justify.
I dunno Shashi, just pointing out the errors that Safari 2 reports when I view your test page, in the hope it might help. I know little of javascript

Message mapping issue in idoc to jdbc scenario

We have a scenario of idoc->XI-JDBC
the below given segment may get repeated , as shown below ,
E1EDP19[2]--idoc segment
   QUALF---003
   IDTNR---01000123(Bar Code No)
E1EDP19[3]--idoc segment
   QUALF---003
   IDTNR---20500000000034(EAN No)
Reqd mapping
if QUALF=003
THEN IDTNR----->Bar_code_Number_EAN
Now IDTNR has to be mapped with Bar_code_Number_EAN for the segment which comes last
Pl suggest how to map using graphical mapping for the above scenario.

Hi Raj ,
The current mapping works fine if the parent segment E1EDP01 is only one but if that gets repeated then the last value of IDTNR is getting populated in the target side, very clearly i m giving the source and target structure and the mapping done using the UDF
Source structure
E1EDP01
       E1EDP19[1]--idoc segment
              QUALF---002
              IDTNR---01000123(Bar Code No)
       E1EDP19[2]--idoc segment
              QUALF---003
              IDTNR---01000123(Bar Code No)
       E1EDP19[3]--idoc segment
           QUALF---003
           IDTNR---20500000000030(EAN No)
E1EDP01
     E1EDP19[1]--idoc segment
                QUALF---002
                IDTNR---01000123(Bar Code No)
     E1EDP19[2]--idoc segment
               QUALF---003
               IDTNR---01000123(Bar Code No)
      E1EDP19[3]--idoc segment
             QUALF---003
             IDTNR---20500000000031(EAN No)
E1EDP01
       E1EDP19[1]--idoc segment
               QUALF---002
                IDTNR---01000123(Bar Code No)
      E1EDP19[2]--idoc segment
              QUALF---003
              IDTNR---01000123(Bar Code No)
     E1EDP19[3]--idoc segment
          QUALF---003
          IDTNR---20500000000032(EAN No)
Target mapping
if QUALF=002
THEN IDTNR--->Article_No this is the direct mapping so , no issues
if QUALF=003
THEN IDTNR----->Bar_code_Number_EAN, now this IDTNR should get repeated every time the segment E1EDP01 gets repeated , currently only the last value form all the IDTNR is coming to the target side.
The current mapping works fine if the parent segment E1EDP01 is only one
Target structure
Access1
IDTNR--> Bar_code_Number_EAN( value is 20500000000030)
Access2
IDTNR--> Bar_code_Number_EAN( value is 20500000000031)
Access3
IDTNR--> Bar_code_Number_EAN( value is 20500000000032)
Current mapping
If QUALF = 003
                Then QUALF ---->
                                                 mapBarCodeEAN---->Bar_code_Num_EAN
If QUALF = 003
                Then IDTNR ---->
Context of QUALF is set to E1EDP01
Context of IDTNR is set to E1EDP01
thanks for your personalised help
rgds
mojib
Edited by: mohammad mojib ur rahman on Apr 9, 2010 1:30 PM

Nio ByteBuffer and memory-mapped file size limitation

I have a question/issue regarding ByteBuffer and memory-mapped file size limitations. I recently started using NIO FileChannels and ByteBuffers to store and process buffers of binary data. Until now, the maximum individual ByteBuffer/memory-mapped file size I have needed to process was around 80MB.
However, I need to now begin processing larger buffers of binary data from a new source. Initial testing with buffer sizes above 100MB result in IOExceptions (java.lang.OutOfMemoryError: Map failed).
I am using 32bit Windows XP; 2GB of memory (typically 1.3 to 1.5GB free); Java version 1.6.0_03; with -Xmx set to 1280m. Decreasing the Java heap max size down 768m does result in the ability to memory map larger buffers to files, but never bigger than roughly 500MB. However, the application that uses this code contains other components that require the -xMx option to be set to 1280.
The following simple code segment executed by itself will produce the IOException for me when executed using -Xmx1280m. If I use -Xmx768m, I can increase the buffer size up to around 300MB, but never to a size that I would think I could map.
try
String mapFile = "C:/temp/" + UUID.randomUUID().toString() + ".tmp";
FileChannel rwChan = new RandomAccessFile( mapFile, "rw").getChannel();
ByteBuffer byteBuffer = rwChan.map( FileChannel.MapMode.READ_WRITE,
0, 100000000 );
rwChan.close();
catch( Exception e )
e.printStackTrace();
I am hoping that someone can shed some light on the factors that affect the amount of data that may be memory mapped to/in a file at one time. I have investigated this for some time now and based on my understanding of how memory mapped files are supposed to work, I would think that I could map ByteBuffers to files larger than 500MB. I believe that address space plays a role, but I admittedly am no OS address space expert.
Thanks in advance for any input.
Regards- KJ

See the workaround in http://bugs.sun.com/bugdatabase/view_bug.do?bug_id=4724038

Mapping issue - if value matches on of several conditions

Hi champs,
I have a mapping in PI 7.1 of an invoice-xml to a INVOIC02-idoc.
I am mapping the invoice sums to E1EDS01-segments and just want to map five of several qualifiers. So I have set up a mapping for the qualifier field SUMID that just maps those five qualifiers, and map the SUMME-field from inbound message as it is.
Now it shows that our vendors send more than those five qualifiers I have in my mapping. Since I don´t have any control of the SUMME-field all seven values get mapped into the Idoc (generating seven E1EDS01-segments), but only the five segments with my mapped SUMID get the SUMID-field. So I get in total seven E1EDS01 segments in which I get only the SUMME in two of them.
So my question is: Are there any pretty ways to handle this kind of mapping issues besides using a lot of equalS, if and or?
I would like to be able to say (in as simple a function as possible) that if qualifier in field A is X, Y or Z then map the value in field B to SUMME. How do I do that? BTW I am not a java-programmer so advanced java-codes are not a good way for me to handle it.
regards,
Glenn

Write an UDF with this code:
public void <UDFNAME>(String <FieldName>,Container container){
If (<FieldName> == "X" || <FieldName> == "Y" || <FieldName> == "Z"){
return <FieldName>;
Edited by: spantaleoni on Mar 16, 2011 4:04 PM

Mapping issue with context again

I again need help with a mapping issue. I dont know how to handle the contexts to get this working in the xi graphical mapping tool. I have previously logged a question regarding this structure but the requirements have now changed.
I have a source document that has multiple delivery line items and for each delivery line item, there are multiple handling units. Each handling unit contains the line number of the delivery line item it belongs to. This structure has been simplified below.
Source Sample
<DOCUMENT>
<DELIVERY_LINEITEM>
<LINENUMBER>10</LINENUMBER>
<MATERIAL>mat 1</MATERIAL>
</DELIVERY_LINEITEM >
<DELIVERY_LINEITEM >
<LINENUMBER>20</LINENUMBER>
<MATERIAL>mat 2</MATERIAL>
</DELIVERY_LINEITEM >
<HANDLING_UNITS>
<HU_LABEL>123</HU_LABEL>
<HU_ITEM>
<LINENUMBER>10</LINENUMBER>
</HU_ITEM>
</HANDLING_UNITS>
<HANDLING_UNITS>
<HU_LABEL>456</HU_LABEL>
<HU_ITEM>
<LINENUMBER>10</LINENUMBER>
</HU_ITEM>
</HANDLING_UNITS>
<HANDLING_UNITS>
<HU_LABEL>789</HU_LABEL>
<HU_ITEM>
<LINENUMBER>20</LINENUMBER>
</HU_ITEM>
</HANDLING_UNITS>
</DOCUMENT>
Source Structure
DOCUMENT 1..1
DELIVERY_LINEITEM 1..unbounded
LINENUMBER 1..1
MATERIAL 1..1
HANDLING_UNITS 1..unbounded
HU_LABEL 1..1
HU_ITEM 1..1
LINENUMBER 1..1
In the target structure, I need to output each handling unit along with the corresponding DELIVERY_LINEITEM material. Target structure has been simplified below:
Target Sample
<DOCUMENT>
<ROW>
<PACKAGING>
<HU_LABEL>123</HU_LABEL>
</PACKAGING>
<PACKAGING_ITEM>
<LINENUMBER>10</LINENUMBER>
<MATERIAL>mat 1</MATERIAL>
</PACKAGING_ITEM>
</ROW>
<ROW>
<PACKAGING>
<HU_LABEL>456</HU_LABEL>
</PACKAGING>
<PACKAGING_ITEM>
<LINENUMBER>10</LINENUMBER>
<MATERIAL>mat 1</MATERIAL>
</PACKAGING_ITEM>
</ROW>
<ROW>
<PACKAGING>
<HU_LABEL>789</HU_LABEL>
</PACKAGING>
<PACKAGING_ITEM>
<LINENUMBER>20</LINENUMBER>
<MATERIAL>mat 2</MATERIAL>
</PACKAGING_ITEM>
</ROW>
</DOCUMENT>
Target Structure
DOCUMENT 1..1
ROW 1..unbounded
PACKAGING 1...1
HU_LABEL 1..1
PACKAGING_ITEM 1..1
LINENUMBER 1..1
MATERIAL 1..1
Note, 1 ROW in the target structure = 1 HANDLING_UNITS from the source structure.
Can anyone help me to achieve this? I do not know how to map the relevant DELIVERY_LINEITEM\MATERIAL from the source structure to the target structure.

JM,
Please find the solution. Reply back if it helps or not
http://www.flickr.com/photo_zoom.gne?id=1045178998&size=o
http://www.flickr.com/photo_zoom.gne?id=1045179010&size=o
http://www.flickr.com/photo_zoom.gne?id=1045179022&size=o
Results :http://www.flickr.com/photo_zoom.gne?id=1045179134&size=o
Code used:
for(int j=0;j<Handling_Linenum.length;j++)
for(int k=0;k<Delivery_Linenum.length;k++)
if(Handling_Linenum[j].equals(Delivery_Linenum[k]))
result.addValue(""Material[k]"");
result.addContextChange();
Best regards,
raj.

Horizontal Mapping and Flat mapping with Metadata Value Indicator

Hi
I have an abstract class B which itself extends another abstract class A.
There is no table for A. The fields in A are mapped to B. I believe this
is called "horizontal mapping"
C and D inherit off B. There's a also a table named B (mapped to class B),
but none for C or D. Instances of C and D are recorded in table B. I
believe this is called "flat mapping"
B has a field foo whose possible values are 'fred' and 'wilma'.
If foo='fred', then the record is of type C
If foo='wilma', then the record is of type D
I believe this is called "class indicator" of type metadata.
To express this, I have package.jdo which says
<class name="A"/>
<class name="B" persistence-capable-superclass="A"/>
<class name="C" persistence-capable-superclass="B"/>
<class name="D" persistence-capable-superclass="B"/>
In B.mapping, I have
<mapping>
<package name="domain">
<class name="B">
<jdbc-class-map type="horizontal"/>
<jdbc-class-ind type="metadata-value" column="foo"/>
</class>
</package>
</mapping>
B.java has a private String foo.
In C.mapping, I have
<mapping>
<package name="domain">
<class name="C">
<jdbc-class-map type="flat"/>
<jdbc-class-ind-value value="fred"/>
field mappings for C
</class>
</package>
</mapping>
and similarly in D for value='wilma'
My questions are...
1. Is this kind of mapping supported by kodo?
2. If so, is this configuration correct? I guess not, since I don't
specify the table name anywhere. Where should it go?
3. If I remove the "class indicator" mapping and run a simple test I get
kodo.util.FatalUserException: There is no superclass mapping for mapping
for "class domain.D".
 at
kodo.jdbc.meta.FlatClassMapping.assertParentMapping(FlatClassMapping.java:49)
 at kodo.jdbc.meta.FlatClassMapping.getTable(FlatClassMapping.java:85)
 at
kodo.jdbc.meta.OneToManyFieldMapping.fromMappingInfo(OneToManyFieldMapping.java:87)
 at
kodo.jdbc.meta.RuntimeMappingProvider.getFieldMapping(RuntimeMappingProvider.java:160)
 at
kodo.jdbc.meta.MappingRepository.getFieldMapping(MappingRepository.java:443)
 at
kodo.jdbc.meta.AbstractClassMapping.getFieldMapping(AbstractClassMapping.java:949)
4. If I run a simple test with the horizontal, flat and class-indicator
mappings, I get
kodo.jdbc.meta.MappingInfoNotFoundException: The "class-column"
attribute/extension for the class indicator on type
"domain.B.<class-indicator>" is missing or names a column that does not
exist.
 at kodo.jdbc.meta.Mappings.invalidMapping(Mappings.java:135)
 at kodo.jdbc.meta.Mappings.invalidMapping(Mappings.java:121)
 at
kodo.jdbc.meta.ColumnClassIndicator.fromMappingInfo(ColumnClassIndicator.java:95)
 at
kodo.jdbc.meta.RuntimeMappingProvider.initialize(RuntimeMappingProvider.java:135)
 at
kodo.jdbc.meta.MappingRepository.getMappingInternal(MappingRepository.java:378)
What am I doing wrong?
Thanks in advance
Srini

I solved this problem by removing the identifier field from the
class/mapping (kodo support).
Thanks
Srini
Stephen Kim wrote:
Do you have two fields mapped to the same column? Did you make sure you
set everything which maps to the column?
Srinivasan Ranganathan wrote:
I found what was wrong with this, fixed it and got a different (more
sensible) error. To correct this mapping, I specified B's mapping type as
"base" and gave its table and pk names. Also, I moved the common field
mappings to B.mapping so C.mapping and D.mapping only have fields that are
specific to each.
Now when I run a simple test, I get
testC:
kodo.util.FatalUserException: Attempt to set column "B.FOO" to two
different values: (java.lang.Object)"java.lang.Object@2f608ac2",
(java.lang.String)"fred" This can occur when you fail to set both sides of
a two-sided relation between objects, or when you map different fields to
the same column, but you do not keep the values of these fields in synch.
 at kodo.jdbc.runtime.VRow.setObjectInternal(VRow.java(Compiled Code))
 at kodo.jdbc.sql.AbstractRow.setObject(AbstractRow.java(Compiled Code))
 at
kodo.jdbc.meta.ColumnClassIndicator.insert(ColumnClassIndicator.java:143)
 at kodo.jdbc.runtime.UpdateManagerImpl.insert(UpdateManagerImpl.java:216)
 at kodo.jdbc.runtime.UpdateManagerImpl.insert(UpdateManagerImpl.java:219)
 at kodo.jdbc.runtime.UpdateManagerImpl.flush(UpdateManagerImpl.java:108)
 at kodo.jdbc.runtime.UpdateManagerImpl.flush(UpdateManagerImpl.java:73)
testD:
kodo.util.FatalUserException: Attempt to set column "B.FOO" to two
different values: (java.lang.Object)"java.lang.Object@2f608ac2",
(java.lang.String)"wilma" This can occur when you fail to set both sides
of a two-sided relation between objects, or when you map different fields
to the same column, but you do not keep the values of these fields in
synch.
 at kodo.jdbc.runtime.VRow.setObjectInternal(VRow.java(Compiled Code))
 at kodo.jdbc.sql.AbstractRow.setObject(AbstractRow.java(Compiled Code))
 at
kodo.jdbc.meta.ColumnClassIndicator.insert(ColumnClassIndicator.java:143)
 at kodo.jdbc.runtime.UpdateManagerImpl.insert(UpdateManagerImpl.java:216)
 at kodo.jdbc.runtime.UpdateManagerImpl.insert(UpdateManagerImpl.java:219)
 at kodo.jdbc.runtime.UpdateManagerImpl.flush(UpdateManagerImpl.java:108)
 at kodo.jdbc.runtime.UpdateManagerImpl.flush(UpdateManagerImpl.java:73)
I've checked for the two possible errors to the best of my knowledge. Any
input to resolve this issue is appreciated.
Thanks in advance
Srini
Srinivasan Ranganathan wrote:
Hi
I have an abstract class B which itself extends another abstract class A.
There is no table for A. The fields in A are mapped to B. I believe this
is called "horizontal mapping"
C and D inherit off B. There's a also a table named B (mapped to class B),
but none for C or D. Instances of C and D are recorded in table B. I
believe this is called "flat mapping"
B has a field foo whose possible values are 'fred' and 'wilma'.
If foo='fred', then the record is of type C
If foo='wilma', then the record is of type D
I believe this is called "class indicator" of type metadata.
To express this, I have package.jdo which says
<class name="A"/>
<class name="B" persistence-capable-superclass="A"/>
<class name="C" persistence-capable-superclass="B"/>
<class name="D" persistence-capable-superclass="B"/>
In B.mapping, I have
<mapping>
<package name="domain">
<class name="B">
<jdbc-class-map type="horizontal"/>
<jdbc-class-ind type="metadata-value" column="foo"/>
</class>
</package>
</mapping>
B.java has a private String foo.
In C.mapping, I have
<mapping>
<package name="domain">
<class name="C">
<jdbc-class-map type="flat"/>
<jdbc-class-ind-value value="fred"/>
field mappings for C
</class>
</package>
</mapping>
and similarly in D for value='wilma'
My questions are...
1. Is this kind of mapping supported by kodo?
2. If so, is this configuration correct? I guess not, since I don't
specify the table name anywhere. Where should it go?
3. If I remove the "class indicator" mapping and run a simple test I get
kodo.util.FatalUserException: There is no superclass mapping for mapping
for "class domain.D".
 at
kodo.jdbc.meta.FlatClassMapping.assertParentMapping(FlatClassMapping.java:49)
 at kodo.jdbc.meta.FlatClassMapping.getTable(FlatClassMapping.java:85)
 at
kodo.jdbc.meta.OneToManyFieldMapping.fromMappingInfo(OneToManyFieldMapping.java:87)
>>
 at
kodo.jdbc.meta.RuntimeMappingProvider.getFieldMapping(RuntimeMappingProvider.java:160)
>>
 at
kodo.jdbc.meta.MappingRepository.getFieldMapping(MappingRepository.java:443)
 at
kodo.jdbc.meta.AbstractClassMapping.getFieldMapping(AbstractClassMapping.java:949)
>>
>>
>>
>>
4. If I run a simple test with the horizontal, flat and class-indicator
mappings, I get
kodo.jdbc.meta.MappingInfoNotFoundException: The "class-column"
attribute/extension for the class indicator on type
"domain.B.<class-indicator>" is missing or names a column that does not
exist.
 at kodo.jdbc.meta.Mappings.invalidMapping(Mappings.java:135)
 at kodo.jdbc.meta.Mappings.invalidMapping(Mappings.java:121)
 at
kodo.jdbc.meta.ColumnClassIndicator.fromMappingInfo(ColumnClassIndicator.java:95)
>>
 at
kodo.jdbc.meta.RuntimeMappingProvider.initialize(RuntimeMappingProvider.java:135)
>>
 at
kodo.jdbc.meta.MappingRepository.getMappingInternal(MappingRepository.java:378)
>>
>>
>>
What am I doing wrong?
Thanks in advance
Srini
Steve Kim
[email protected]
SolarMetric Inc.
http://www.solarmetric.com

LensBlur and Depth Map issue

Similar Messages

Maybe you are looking for