Lense Adapter Help

I've got both a Canon EOS Rebel XS DSLR and a Canon T50, the T50 has an "Albinar ADG 80-200mm 1:3.9 MC Macro Zoom No. 85107440 55mm lense" and I know there are adapters made to allow lenses from one camera to fit on another, problem is, I can't figure out which adapter I need. Is there anyone out there that can help me? I want to be able to fit the lense I listed above, onto my Canon EOS Rebel XS DSLR. Thank you.

It is possible to purchase an FD-EOS adapter that will let you mount that lens. It will be manual focus and manual aperture. The following link pretty much sums it all up.
http://community.usa.canon.com/t5/Lenses/Old-SLR-lenses-to-DSLR-Camera/m-p/147109#M5947

Similar Messages

  • HP MediaSmart Connect x280n AC Adapter HELP PLEASE!

    HP MediaSmart Connect x280n AC Adapter HELP PLEASE!
    Please someone tell me where I can get an AC for this unit and if not, please tell me the part number of this AC Adapter if you own one of these please? I have iterally looked for over 15 hours the past 2 days and called HP only to be passed on from department to department with not one clue as to this part number or where I can obtain an adapter for my unit. I found only 2 on ebay that had visible markings on the AC in the pics but could make out neither of their text.
    Thanks in advance for any help.

    Did you ever get an answer to this question?
    I'm about to be in the same situation, and have been trawling the web to try to find a specification for the power supply.
    I can see that the unit requires 19V at 22W, but that's all.
    I don't know the size of the DC connector that is required.
    Thanks!

  • Mini dvi to video adapter help pleaseeeeeeeeeeeeeeeeeeeeeeeeee

    right,
    ive got a 20" intel imac. i bought a mini dvi to video adapter.it said it works with the intel macs.
    i maybe being a bit thick here but the end of the dvi seems to be a different size to the port on the mac.
    please help....................

    You might find relief in the iMac Forum. Perhaps they will appreciate your distinctive thread header style more fully.
    good luck.
    x

  • Travel adapter help

    I moved to London in December after buying my iBook in the States. I'm not living here forever, so I bought some travel adapters to make my stay here easier. I've been using the England adapter since I got here, and this weekend started to notice that it didn't always give power to my computer. It sometimes gives power, and at other times the light is gray. Does anyone have any suggestions (other than buying ANOTHER set of adapters?) I'm going to be here until at least the summer, and the one I bought for my Airport Express seems to be working just fine. Thank you! S
    iBook G4   Mac OS X (10.4.5)  

    Not so much a reply as piggybacking on a topic raised in this thread.
    I'm travelling to India next week, and discovered - to my surprise -
    that the World Travel Adapter Kit (WTAK) doesn't have anything that
    works with India's electrical plug standard. In the dim recesses of my
    memory, I recall that someone had ferretted out the name of the OEM
    supplier of Apple's Powerbook AC adapter, and discovered an aftermarket
    supplier of various 'duckhead' plugs that fit them, much like the ones in the
    WTAK, but with support for other electrical standards - which might
    even iinclude India's.
    And yes, I realize I can stick a converter plug on the end of the standard
    Edison cable that comes with every AC adapter and handle it that way, but I'll be moving around a lot, and having a dedicated plug on the end of the Apple adapter cube itself will be much slicker.
    Can anyone help? The usual search engines have come up empty. I recall
    the supplier being Asian, with an odd name, but that's probably not
    much help. The irony is that one search took me to the Apple Store in
    India's listing for the WTAK, which of course does not help anyone
    either in India or travelling there -at all-.
    Given Steve Jobs' fondness for all things Indai, you'd think this would be a #1 priority, but sadly, I guess it's not.
    Thanks in advance.

  • File Content Conversion in Receiver Adapter Help

    Hi,
    I need to have a flat file at receiver side with the following structure.
    Product
    LineItem
    Notes
    Product
    LineItem
    Notes
    But i am getting as
    Product
    Product
    LineItem
    Notes
    Notes
    Please suggest me the changes to be made in File Content Conversion Parameter
    Your Help will be appreciated.
    Thanks in advance,
    Ashok

    Singh,
    I think we wont give field names in the receiver file adapter. Please find the details below:
    RecordSet Structure: Product,LineItem,Notes.....
    Parameters:
    Product.fieldFixedLengths:30,10...
    Product.endSeparator:'nl'
    LineItem.fieldFixedLengths:30,10..
    LineItem.endSeparator:'nl'
    Notes.fieldFixedLengths:30,10...
    Notes.endSeparator: 'nl'
    Thanks
    Ashok

  • Universal Dock Adapter Help

    Hi All,
    I just received my 60gb 5g ipod and universal dock. I am having trouble with the dock adapter and wondering if anyone had the same problems or insight into my problem.
    The adapter I got is labeled 9. It seems to be clearly too small to fit the 60gb ipod, looks like would be good for the 30gb. With it in the universal dock...there is only about 2-3 mm of space...which is not enough for the 60gb it seems to me... as far as reference it looks like the adapter that came with the universal dock for the 20gb ipod (#'s 4 and 6). I tried using the adapter for the 40gb and that actually lets the ipod go in and connect. But still not the perfect fit that I am looking for.
    Thanks for any input or help.
    Did other people with the 60gb 5g ipod have the number 9 adapter?
    Thanks,
    Jason

    Go to the Apple Store online, 3 pack, $9.
    I'll make it easy for you: click
    http://store.apple.com/1-800-MY-APPLE/WebObjects/AppleStore.woa/7200505/wo/NS4ax agJH3TE2zQ0hsZryPzEo6u/2.SLID?mco=F0F997D9&nplm=MA126G%2FA

  • Registering USB Power Adapter - Help

    Hey, does any1 noe how to register the USB Power Adapter for the iPod? ive tried puttn in all the numbers on the boxes and it doesnt work and it says that its not a valid serial number. the problem is, i also dont have the receipt for teh adapter either since it was a gift from a friend so that would also disable me from knowing the "enrollment number" as well.. help or suggestions NE1? hit me back here or email me personally @
    [email protected]
    thanks in advance

    What do you mean "register"?
    Are you trying to register it with Apple for warranty purposes?
    ive tried puttn in all the numbers on the boxes and it doesnt work and it says that its not a valid serial number
    Probably because there is no option to register a USB power adapter. The registration page is looking for an iPod serial number which you want to register.

  • USB to PS2 Adapter Help

    Quick question:
    Being that the MAC Mini is so small, I want to be able to bring it to work with me once in a while.
    However, at work, my KVM (2 port) switch only has PS2 inputs. There are no USB inputs for a keyboard and/or mouse (which is the only thing the MAC Mini will take)
    At radio shack, they have those USB to PS2 adapters (It kind of looks like a Y adapter with 1 Male USB plug on one end, and, the 2 PS2 female ports "green and purple" on the other end). I am wondering, if anyone out there is using one of these for their MAC Mini. I wanted o know this before going out and buying one, just to find out that I wasted my time.
    Any help would be appreciated.
    Gary

    I too was using a PS/2 KVM and tried the PS/2-to-USB adapter. The mini was unable to recognize the keyboard but the mouse worked fine. I tried several brands of these adapters, but none worked. My PC, on the other hand, didn't have any issues with this configuration. At the time I was using a Logitech Duo wireless keyboard/mouse.
    I ended up gettting a USB KVM and a USB keyboard/mouse combo that works great for both the PC & Mac. The mini, like all computers, needs to "recognize" the devices plugged into it, but the mini becomes "near-sighted" especially when KVMs are added to the mix.

  • Using Apple Pro Speakers with MacBookPro - Adapter Help???

    I just got a brand new MBP which is awesome! I am having a lot of fun with it.
    However a real bummer I noticed is my old Apple Pro Speakers would not connect into my MBP jack. I have done some initial research on this and it seems like the only way to have them connect is get an adapter, Griffin iFire? I looked into that a little and unless I missed something that product isn't being made anymore.
    Can anyone offer any other links / ideas on how I get get these speakers to work? They worked great on my G4 and have an iSub so I would hate to not be able to use them anymore and have to outlaw more money for newer speakers.
    Thanks again for any help!!!
    -C

    The iFire adapter by Griffin did the trick, and it works like a charm. Although the iFire is no longer being manufactured, you can still find them on eBay or through some online computer retailers. Thanks everyone for their help.

  • Scripted Gateway Resource Adapter - Help requested

    Hello all,
    Sun IDM 8.1.0.9 running on JBOSS 4.2 running on Redhat 5.0
    Gateway server is Windows Server 2008 R2 (x64)
    I'm trying to use the Scripted Gateway Resource Adapter. I can get it to execute Windows CMD files just fine but as soon as I ask the cmd file to run either powershell or even vbscript, it craps out. Return code is -65536 and Error text is just the letter 'W'.
    Enter: reply
    Enter: sendBuffer
    Sending buffer:
    <?xml version='1.0' encoding='UTF-16'?>
    <Response>
    <Result status='ok'>
    <ResultItem type='ACTION_RC'>
    <object class='String'>-65536</object>
    </ResultItem>
    <ResultItem type='ACTION_STDOUT'>
    <object class='String'></object>
    </ResultItem>
    <ResultItem type='ACTION_STDERR'>
    <object class='String'>W</object>
    </ResultItem>
    </Result>
    </Response>
    I know the Gateway.exe program is a 32-bit program and is quite particular about that and I have tried to take that into account when calling PoSH or VBScript.
    If anyone has had any experience with this adapter, any help or guidance would be greatly appreciated.
    Tim.
    Edited by: tmunro55 on Nov 14, 2011 10:28 AM

    OK so here's the scoop. Rather than upgrading the IDM to OW 8.1.1 (which will happen eventually, just not fast enough), I downgraded the Gateway server to Windows Server 2003 (x86). It all works. The answer that it required OW 8.1.1 for Server 2008 R2 was indirectly spot on.
    Marking this as answered.
    Thanks.
    Edited by: tmunro55 on Nov 16, 2011 6:56 PM

  • Prepopulate adapter help required

    Hello Experts,
    I have OIM 11.1.1.5 on win32 platform, and I have connected OIM to a database(target system) through a connector(DBAT connector).
    While provisioning a user to that database, it ask for the values which i need to store in database.
    What i want is to map those database values to OIM attributes.
    For example: my table has first name, last name column and instaed of manually providing those values i want to pre-populate those values from user definition.
    As i was doing R&D, I got to know that I have to create an pre-populate adapter(specifically a copy adapter). Kindly suggest me what are all the steps do I need to follow to
    do the same.
    Thanks in advance.
    Warm Regards,
    KK

    There are plenty of examples of Pre Pop adapter on the forum and internet . Please try to search out .
    You can access the below link to see a working example .
    http://identityandaccessmanager.blogspot.in/2011/07/prepopulate-adapter-in-oim-11g.html
    http://docs.oracle.com/cd/B31081_01/idmgr/b25939/using.htm
    Hope this helps.
    Thanks
    Suren

  • ThinkCentr​e 300K Display Adapter Help

    We have a ThinkCentre 300K tower and has been working fine for over a year. All of a sudden the monitor would display "not receiving RGB signal and will shut off". I have tried to restart the computer and in the middle of the boot up it will start off fine and jump to "no signal" on the monitor. When I boot the computer in safe mode it does not do this; however, in safe mode the screen images are completely out of proportion and is very large.
    While in safe mode I went to the Device Manger and under display adapters if has listed: Intel (R) G45 / G43 Express Chipset. I right clicked on this and disabled the adapter. After doing this the computer would boot in its normal startup mode; however, the screen is still distorted. I have uninstalled display adapters and have reinstalled them from the website and then I have the same issue all over again.
    Clearly the monitor, cable, and computer are working and it appears it is a software issue, but I am unable to figure it out. Any help in this matter would be appreciated. Thank You.

    I noticed that there is an ATI Video BIOS Flash Utility for ATI Radeon X1600 Pro graphics adapters which will upate ATI Radeon X1600 graphics adapters to video BIOS S3A67621.109. :
    http://support.lenovo.com/en/downloads/ds000784
    This is for Windows XP (32-bit) only. I am using Windows 8.1. Would by any chance be an ATI video Bios flash for this X1600 Pro card for a 64 bit operating system??

  • FREETALK Phone Adapter Help

    Can I use a FREETALK Phone Adapter with a online number without a landline? I've got a DSL internet connection*Virgin Meida Internet*

    Dear Greatbritton2k1,
    The FREETALK® Connect•Me adapter will allow you to receive calls from your SkypeIn online number as well as your land line number (there is no need to change it if you already have one). All that is required is a regular home phone (not a land line connection, but the actual phone set) and internet connection. You will also be able to make calls using your Skype Credit/Subscription. You will also be able to receive and make calls when the computer is off.
    Hope you found this helpful!
    Best regards,
    Connect.Me Pro

  • Configuring BRM Adapter Help!!

    Hi,
    I am installed successfully soa 11g, aia 11g and aia prebuild integrations 11g PIP.
    after installation of pip i am trying to configure the aia pip, in the process of configuration, i need to deploy the BRM JCA Adapter in weblogic
    after deploying what are the configurations i need to do on it.
    Any one please help on this.
    Thanks ,
    Ajay.

    Hi, After deploying the BRM adapter on WebLogic server, you basically need to create/configure connection pool/factory to connect to the BRM system. You can refer this link (if you haven't already!) - http://docs.oracle.com/cd/E16754_01/doc.75/e16708/jca_resource_adapter_config.htm#i467868

  • A problem with the network adapter, help please

    I have an hp touchsmart pc 600 1040uk and today i woke up to find that the network adapter (nVIDIA) dissapeared and no local area connection. Also i can not connect to the wireless network
    I tried everything starting by restarting my router then removing all the cables and retarting the pc. Also tried adding a new device and everything didnt work. I even restored the pc to the factory settings and after starting over new still there is no local area network, just the wireless and bluetooth adapters and the wireless did not connect
    Another problem is that when i restored the pc to factory settings the recovery program asked me to backup my pc and I did the backup and saved it in an external hard disk, and now I cant restore that back coz it dosent appear in the window of backups to restore
    Plllllllllllllllllllllllllllllllllllllllllease help me, thanks

    I found this on another post by "Scott", and it worked. 
    http://support.apple.com/kb/TS2048?viewlocale=en_US
    Sure did take some searching to get to the answer.

Maybe you are looking for