Lenteur Avec Adobe Premiere Element - Conseils pour installation.

Bonjour
J'ai vendu il y a un an un PC à un client qui utilise Adobe Element 10. (Core i7-870 - HD6850 - 8 Go - 750 Go).
Le disque dur est partitionné en 2 partitions, une pour le système et les programmes, une seconde pour les données.
Mon client se plaint de lenteur sous Premiere Element 10.
Le fait est qu'à l'ouverture d'un projet, plusieurs minutes sont nécesaires avant d'avoir la main.
J'ai regardé le taux d'utilisation de la RAM, à peine 3 Go sont sollicités sur les 8 Go. Je ne pense donc pas que le problème vienne de là.
Le processeur n'est occupé qu'à quelques %
Reste donc le disque dur ...
J'aimerais donc avoir vos avis sur la cause possible de cette lenteur, ainsi que vos suggestions pour y remédier.
D'autre part :
Un SSD comme disque système améliorerait-il sensiblement le fonctionement ?
Quid du DD unique ?
Je ne connais pas du tout Adobe. Y a-t-il des points à contrôler concernant l'installation ? (emplacement des dossiers des projets, des dossiers temporaires s'il y en a, ...)
Merci.
Stéphane

Bonjour Pierre-Etienne
Merci pour ta réponse. Je vais essayer le réglage des effets visuels. Je posterai sur le résultat.
Non, pour le moment, tout est sur un même disque (WD75002ABYS famille RE de Western Digital, à 7200 tr/mn).
Le lien vers le site d'Adobe est très interressant, même si je ne fais pas encore tout à fait le lien entre les différents dossiers ("vidéo capturée", "audio capturée"...) et ce qui est réellement actuellement sur le disque du PC.
Que penses tu de l'évolution suivante :
Passage du système sur un SSD en veillant à ce qu'aucun dossier de travail ne soit installé sur ce disque.
Récupération du DD de 750 Go, et ajout d'un second DD à partager entre les différents dossiers. D'après les recommandations d'Adobe, je réserverais un disque aux dossiers vidéo et audio capturées ainsi que prévisualisations vidéo et un autre aux dossiers prévisualisation audio, cache de média et codage de projet. Ai-je bien interprété la note d'Adobe ?
Merci encore pour ton aide.
Stéphane

Similar Messages

  • Est-ce que l'on peut exporter en Ultra HD 4k avec adobe premiere element 13 ?

    Bonjour,
    Ayant fait l'achat d'une Gopro Hero 4, j'aimerais savoir si le logiciel Adobe premiere element 13 me permettra de modifier ma video et de l'exporter en 4K ?
    Je vous remercie d'avance

    Bon j'ai trouver par moi même.
    Pour ceux que ça interesse, je confirme que Adobe premiere element 13 permet d'avoir un rendu 4K.
    Ce format s'appelle "XAVC-S"

  • Lenteur avec Adobe Premiere Pro CS6

    Bonjour,
    je viens d'installer l'application de adobe Premiere Pro CS6 sur un Mac OS x Lion 10.7.5
    dés que je commence à travailler sur une vidéo, image... je remarque un petit lenteur et des imanges qui se bloquent pour qlqs instants...
    Le Mac est neuf...
    C'est un problème qui prvient de l'application ou quoi????
    Ani idea????

    Bonjour, puisque la dernière phrase de votre message est en anglais, je vous renvoie vers une vidéo (pour After Effects) et surtout le "white paper" sur les performances en production. Vous pourrez aussi vérifier que votre configuration répond bien aux critères non pas minimums, mais plutôt recommandés.

  • Problems with Adobe Premiere Elements 10 silent installation with SCCM 2007

    Hi, i have some issues when i try to install Premiere Elements 10 from Config Manager.
    I have followed these instructions:
    http://www.appdeploy.com/packages/detail.asp?id=2331
    If i try this commandoline:
    setup.exe" /L1033 /S /V“SERIALNUMBER=xxxx-xxxx-xxxx-xxxx-xxxx-xxxx COUNTRY=xxx /qn" it works when i run this locally, but not from Config manager, i get an exit code 1203.
    Can someone tell me what i can change in the MSI, so i can use the MSI installer?

    Well, if i use this commandoline: oem.exe /UL1033 /V"SERIALNUMBER=xxxx-xxxx-xxxx-xxxx-xxxx-xxxx"
    i get this error:
    program for advertisement "XXXXXX" failed ("xxxxxx" - "Per-system unattended"). A failure exit code of 255 was returned.
    User context: NT-MYNDIGHET\SYSTEM
    Possible cause: Systems Management Server (SMS) determines status for each program it executes. If SMS cannot find or correlate any installation status Management Information Format (MIF) files for the program, it uses the program's exit code to determine status. An exit code of 255 is considered a failure.
    Solution: For more information on the exit code, refer to the documentation for the program you are distributing.

  • Probléme avec Adobe Premiere Element 12

    Bonsoir,
    Je ne suis pas un expert en informatique. Jai fait un montage vidéo avec Adobe première élément 12 .
    Et j'ai un message lors du commencement de la gravure "Adobe Première Eléments 12 à cessé de fonctionner,
    Un problème à fait que le programme à cessé de fonctionner correctement. Windows va fermer ce programme
    et vous indiquez si une solution est disponible". Je travail avec Windows 7 pro X64bit. Intel Core i3, nombre de
    cœurs 2 physiques, 4 logiques. Carte mère Acer H57M01. Mémoire 8 Go type DDr3.
    Carte Graphique NVIDIA GeForce GT 320.Disque Dur de 500 Go. Lecteur ATAPI DVD A DH16AASH..
    J'ai fait des nettoyages de disque. Avec Malwarebyte, CClener, Wise Registry. Le logiciel je l'ai retiré et remis.
    Les pilotes sont à jours.  Je ne s'ai plus quoi faire, si une âme charitable pouvez me dépanner,
    Grand Merci

    then start as administrator.
    if you want to automate that: http://technet.microsoft.com/en-us/magazine/ff431742.aspx

  • Supprimer "creation avec la version d'essais d'Adobe premiere elements" après achat de licence

    Bonjour,
    j'ai fais des montages avec la version d’évaluation  d'adobe premiere elements 12 pour tester le programme et je viens d'acheter sur adobe store la licence.
    J'espérais que les projets déjà créés n'auraient plus la bande de marquage au milieu après avoir entré le code, mais sur mes anciens projets, le marque est toujours là. Y-a-t-il moyen de supprimer ce bandeau sans devoir recommencer tout le projet à zéro?
    Merci
    Damien

    Bonjour,
    J'ai eu le même problème, j'ai trouvé la solution sur les forum en anglais.
    Il faut supprimer le fichiers de rendu
    Montage --> Supprimer les fichiers de rendu pour tous les projets.
    Tu refais un rendu et il n'y a plus le bandeau.
    Pas besoin de tout refaire !
    A+

  • Une bande indiquant ''Création avec la version d'essai d'Adobe Premiere Elements'' apparaît lorsque j'ouvre mes extraits vidéos... Disparaîtra-t-elle une fois que j'acheterai le logiciel?

    Bonjour,
    J'ai téléchargé sur mon MAC le mois passé la version gratuite de 30 jours d'Adobe Premiere Elements 12. Avec cette version, j'ai pu créer plusieurs extraits vidéos pour mon assistanat de recherche à l'école.
    Maintenant, la version d'essai a expiré et une bande (avec les mots: Création avec la version d'essai d'Adobe Premiere Elements) apparaît à chaque fois que je fais jouer l'un de mes extraits vidéos. Je ne pourrai pas me servir de ces extraits si cette bande ne disparaît pas... et je ne veux pas recommencer tout mon travail! Pourtant, lorsque j'utilisais la version d'essai, aucune bande n'apparaissait lorsque je faisais jouer les extraits....
    Ma question est donc la suivante: Si j'achète la version Adobe Premiere Elements 13... y a-t-il ainsi une chance que cette bande disparaisse et que je puisse à nouveau me servir de mes extraits?
    MERCI!

    saramv
    I do not believe your question has been answered if you are inquiring about how to remove the Adobe watermark from video that you have exported from the Premiere Elements tryout.
    You cannot remove the Adobe watermark from exports from the tryout, be the export a file saved to the computer hard drive or a burn to disc. Does not matter if you purchase the product later.
    You can remove the Adobe watermark from a project file (project.prel) from the tryout Premiere Elements after you purchase the program.
    When you open a project.file (project.prel) from the tryout Premiere Elements in the purchased product, there are two possibilities for removing the Adobe watermark from that project file...
    a. Go to Timeline Menu/Delete Rendered Files...click on that.
    or
    b. Let the purchased program do it for you automatically...some of us have found this to be the case.
    Please see which one works for you.
    Any questions or need clarification, please do not hesitate to ask.
    Thank you.
    ATR

  • Failed Updates every time!! Error message: Adobe Premiere Elements 12.1 Update Installation failed. Error Code: U44M1P7  Adobe Photoshop Elements 12.1 Update Installation failed. Error Code: U44M1P7

    Adobe Premiere Elements 12.1 Update
    Installation failed. Error Code: U44M1P7
    Adobe Photoshop Elements 12.1 Update
    Installation failed. Error Code: U44M1P7
    Failed updates everyone on an iMac 27" running Mavericks- what can i do to get the latest updates which include support for my Sony A7 digital camera?
    [email protected]

    Update 12.1 installation errors | Photoshop Elements, Premiere Elements

  • Installation Adobe Premiere Elements not working

    I'm trying to install the Adobe Premiere Elements 13 but it's not working. I downloaded the file for the trial version, after downloading i also had to download something called Akamai netsession Client ? I dont know what it is, but i installed it as well. But everytime i want to open the setup it says that an error occurred. I cannot open adobe premiere elements, what should i do? i did the installation 4 times now, it's still not working

    Update:
    Bin soeben beim Installieren. Falls mal jemand das selbe Problem haben sollte... nach Installation von SP2 für Vista (dachte ich hätte das schon gehabt) und Benutzung der selben CD wie für die Installation von PSE 8 funzt es nun... Darauf muss man erstmal kommen... 2 Programme, 2 CD`s die Beide gleich aussehen... und da soll man 2 Mal die Selbe nehmen... egaaal.
    Thread könnt ihr, wenn ihr wollt schliessen.

  • I have a installation disc of adobe premiere elements 10

    I want to install it on my IMac iMac (21.5-inch, Late 2013), I get the following error and warning messages:
    Exit Code: 7
    Please see specific errors and warnings below for troubleshooting. For example,  ERROR: DW006, DW050 ... WARNING: DW016, DW036 ...
    -------------------------------------- Summary --------------------------------------
    - 0 fatal error(s), 7 error(s), 7 warning(s)
    WARNING: DW016: NOTE: Cannot set action to the payload {3F023875-4A52-4605-9DB6-A88D4A813E8D} Camera Profiles Installer 6.0.0.0 as it is already upgraded by the payload {56DCC6F4-322E-42DA-A5DA-26BAD28C1E10} Camera Profiles Installer 8.0.0.0
    WARNING: DW016: NOTE: Cannot set action to the payload {3F023875-4A52-4605-9DB6-A88D4A813E8D} Camera Profiles Installer 6.0.0.0 as it is already upgraded by the payload {56DCC6F4-322E-42DA-A5DA-26BAD28C1E10} Camera Profiles Installer 8.0.0.0
    ----------- Payload: {68FE2517-2E45-4B03-8241-D0634F43878B} Smartsound1 1.0.0.0 -----------
    ERROR: DW006: Apple Package failed to install successfully.
    WARNING: DW036: Payload cannot be installed due to dependent operation failure
    WARNING: DW036: Payload cannot be installed due to dependent operation failure
    WARNING: DW036: Payload cannot be installed due to dependent operation failure
    WARNING: DW036: Payload cannot be installed due to dependent operation failure
    WARNING: DW036: Payload cannot be installed due to dependent operation failure
    ERROR: DW050: The following payload errors were found during install:
    ERROR: DW050:  - Smartsound3: Install failed
    ERROR: DW050:  - Photoshop Camera Raw for Elements 10: Install failed
    ERROR: DW050:  - Adobe Premiere Elements 10_LangPackde_DE: Install failed
    ERROR: DW050:  - Smartsound1: Install failed
    ERROR: DW050:  - Adobe Premiere Elements 10: Failed due to Language Pack installation failure
    ERROR: DW050:  - Smartsound2: Install failed
    I do not find any solution under Error "This serial number is not for a qualifying product" | CS6, CS5.5, CS5
    What can I do?
    If I install the latest version 13, I can not use my serial number and I get only the trial version I do not want to use because you have a kind of watermark in the movie you create.
    Any help please?

    create a desktop folder and copy your installation files to that folder.  then click setup in that desktop directory.

  • Installation of Adobe Premiere Elements 10

    I got a pop up warning during intallation of Adobe Premiere Elements 10 that says This installation package is not supported by this processor type contact your product vendor

    Hi,
    It seems like you are trying to install a wrong package. There are different versions for 64 bit and 32 bit versions of operating system. Can you let us know which Operating system are you working on so that we can suggest a correct version.
    Regards,
    Anushree

  • Adobe Premiere Elements does not open after installation

    Hello,
    I have written before last week. I have bought Adobe Photoshop Elements 11 and Adobe Premiere Elements 11.
    I had a trial version of Photoshop Elements 11 and with the code I could access the full version.
    However Premiere Elements did not open after installation. I did not had a trial version so I first downloaded the full program. I went through the whole installation process and everything seemed ok, no error messages. But when I tried to open Adobe Premiere Elements after restarting the computer it did not open at all. Nothing happened.
    I have de-installed and re-installed the program for a couple of times over and over again but with not result. Also tried to download the trial version first and also this didn't work. I checked my Quicktime and updated to the latest version.
    I use a Windows laptop: Asus Intel Core i5-2430M, 2,4 GHz
    I hope you can help me out!
    Thanks!
    Inge

    Yes I saw it but PSE (refers to Photo Shop Elements??) and I have trouble with Premiere Elements..(so the video program)
    The Photoshop Elements worked.
    I am not sure what to do here also the link at your reply "working with your operation system tools" didn't work..(got the "broken link error")
    thanks
    Inge

  • How do I re-install adobe premiere elements on the same computer? Original installation had error -

    How do I re-install adobe premiere elements 11 on the same computer. Original installation had error - missing dll file.

    What computer? What exact error? Details are everything...
    Mylenium

  • Installation of Adobe Premiere Elements 12 always fails

    During the installation of my Adobe Premiere Elements 12, I always receive an error message (during the processing of linked components) which says:" During the installation an error has occured."
    I have purchased Adobe Premiere Elements online and use the appropriate key provided by the retailer.
    My Adobe Premiere Elements 10 works fine though but I would rather like to get my new program going.
    I have tried all Adobe error correction proposels already but unfortunately in vain.
    Any suggestions how to proceed?

    Thanks for your fast reply. I have already solved the problem and everything works fine.
    Von: kglad [email protected]
    Gesendet: Donnerstag, 28. November 2013 15:48
    An: Weblogger
    Betreff: Installation of Adobe Premiere Elements 12 always fails
    Re: Installation of Adobe Premiere Elements 12 always fails
    created by kglad <http://forums.adobe.com/people/kglad>  in Downloading, Installing, Setting Up - View the full discussion <http://forums.adobe.com/message/5882899#5882899

  • Adobe Premiere Elements installation fails

    I get the following error when installing Adobe Premiere Elements:
    Exit Code: 7
    -------------------------------------- Summary --------------------------------------
    - 0 fatal error(s), 8 error(s), 7 warning(s)
    WARNING: DW031: Payload:{3F023875-4A52-4605-9DB6-A88D4A813E8D} Camera Profiles Installer 6.0.0.0 has been updated and has been selected for repair. The patch {FEA75AFB-4905-43BB-B1D5-5B44D681BFE7} Camera Profiles Installer_6.4_AdobeCameraRawProfile6.0All 6.4.0.0 will be uninstalled now.
    WARNING: DW031: Payload:{3F023875-4A52-4605-9DB6-A88D4A813E8D} Camera Profiles Installer 6.0.0.0 has been updated and has been selected for repair. The patch {FEA75AFB-4905-43BB-B1D5-5B44D681BFE7} Camera Profiles Installer_6.4_AdobeCameraRawProfile6.0All 6.4.0.0 will be uninstalled now.
    ----------- Payload: {68FE2517-2E45-4B03-8241-D0634F43878B} Smartsound1 1.0.0.0 -----------
    ERROR: DW006: Apple Package failed to install successfully.
    WARNING: DW036: Payload cannot be installed due to dependent operation failure
    WARNING: DW036: Payload cannot be installed due to dependent operation failure
    WARNING: DW036: Payload cannot be installed due to dependent operation failure
    WARNING: DW036: Payload cannot be installed due to dependent operation failure
    WARNING: DW036: Payload cannot be installed due to dependent operation failure
    ERROR: DW050: The following payload errors were found during install:
    ERROR: DW050:  - Smartsound3: Install failed
    ERROR: DW050:  - Photoshop Camera Raw for Elements 10: Install failed
    ERROR: DW050:  - Smartsound1: Install failed
    ERROR: DW050:  - Adobe Premiere Elements 10: Failed due to Language Pack installation failure
    ERROR: DW050:  - Adobe Premiere Elements 10_LangPacken_US: Install failed
    ERROR: DW050:  - Smartsound2: Install failed

    Can you follow the steps in below mentioned article :-
    http://helpx.adobe.com/premiere-elements/kb/updated-installation-instructions-premiere-ele ments.html

Maybe you are looking for

  • My Macbook Pro (5,3) sporadically goes to sleep when the lid is open and in use.

    My Macbook Pro (5,3) sporadically goes to sleep when the lid is open and I am actively using it.  This problem happens both with OS X 10.7.2 and Windows 7 (64bit), so I don't think it's an OS issue.  Has anyone else encountered this? It's still cover

  • Oracle 10 Express Edition, SID, DBNAME

    Hi i'm from Russia and my english is very bad! Please, help! I'm use Oracle 10 Express Edition and i have a problem: My soft use speciefied database name, how i can (and may be then) rename SID and DBNAME? I .. change instance with "oradim" ,and chan

  • Dynamic PL/SQL Region

    Hi, i'm having some trouble with PL/SQL regions (or rather with function htp.p)... The first problem is: i want to allocate a variable with the current user and call this variable in htp.p. So i wrote: DECLARE BEGIN v_user := :P1_USER; HTP.p (v_user)

  • Macbook, "save document" screen is not visible on left side and I can't reach the buttons to shrink it

    I have a mac book with windows platform.  When I attempt to save a document my save screen is not positioned for me to see the whole thing.  I would resize it, but the resize arrows are off the screen with the entire left side of the window.  How can

  • Assign cfinput checkbox value

    I have following code to assign value from my stored procedures. The text cfinput works to get value from stored procedure, but check box does not get value. The check box value return to 1, but check box does not check. I would like to know are ther