Leopard 10.5.2 - Mail sent but not recieved
Hi
I upgraded to 10.5.2 and have been having a strange problem with mail since then.
I have 5 email accounts (4 yahoo and a gmail account) setup in mail and have checked all pop and smtp settings are correct. Since the upgrade although all messages eventually end up in the sent items folder (some blank emails with test as subject take 20 seconds or more to send) many are not being recieved by the recipiant. I have tried using the smtp server settings of talktalk (my ISP) but again this works intermitantly.
It would appear that the emails are being sent as they are in sent folder but aren't recieved. I have tried sending emails to myself or my other accounts with the same results.
I'm really stumped on this one so any help would be greatly appreciated.
Cheers
Sean
No problems here after upgrading and running my gmail through mail as pop.
well, ok I have no new mail alert sound playing, but that's a different story grrrrr
Similar Messages
-
Dear all,
While sending mail, the status is showing in green but the user is not receiving the mail in the mailbox. The same mail when sent to other user we obtain the result is expected and they are receiving the mails.
Please suggest me as hot face with this issue.
Help is highly appreciated.
Thanks a lot.
PiyushDear all,
Very thanks for giving your suggestions.
The problem seemed to be with the SMTP server configuration.
We changed the SMTP server in SCOT and thereafter we are not facing any issue.
Thanks a lot again.
Regards,
Piyush -
sms code for verification does not reach to my mobile. ? i can not access my e-mail because of code that does not sent right now. code that related to my alternated e-mail was sent , but not to mobile
Bugzilla is not the place for this sort of problem. Forwarded this post to the relevant team.
-
I tried to make an Apple ID on iPhone 3GS. The process was interrupted by time-out. Re-attempt says, this e-mail address is already in use. "Forgot your Apple ID?" cannot be identified the names and e-mail address. "Forgot Your Password?" e-mail sent, but never received. What now?
Solved.
-
Mail, receiving but not sending
Mail is playing up after I installed a new Snow Leopard system. I can receive but not send. As far as I can tell I have all the right settings. My (don't tell anyone) PC laptop works perfectly.Can anyone tell me where I should be looking?
Open Mail and look in Mail menu item "Window". In the drop-down select "Connection Doctor" and before checking in Connection Doctor look at the bottom of it's pane and show the read out print, then click on check server connection. This way you can see what the server is telling your Mac. Maybe you didn't set up the SMTP server settings correctly.
-
Account password reset sent but not received by Outlook.
I have requested a password reset, went through the process and had success at Apples end. Email was sent but not received by the Outlook account email I have been using for years. Outlook is still working fine. Nothing in Junk folder and have added the apple email to contacts (from last reset).
Any ideas?Contact Apple for assistance resetting the password, either by going to https://expresslane.apple.com, then click More Products and Services>Apple ID>Other Apple ID Topics>Lost or forgotten Apple ID password, or by contacting the Apple account security team: http://support.apple.com/kb/HT5699.
-
TS3274 Internet fine but email just says no service can send mail but not recieve
iPad says no service,can use Internet and send mail just do not recieve any
Hey Unitrode,
Welcome to Apple Support Communities, and thanks for the question. If you're experiencing difficulty with email on your iPad I'd check out the following troubleshooting steps, especially step 5:
iOS: Unable to send or receive email
http://support.apple.com/kb/ts3899
All the best,
David -
I can send in hotmail, but not recieve, how do I fix this
# Question
I can send in hotmail, but not recieve, how do I fix this
I send a test to myself, and it doesn't go through,
also links from searches don't arriveHi there, thanks for your reply, I cannot give you the URL as this is Cloud Based Farming Software which requires a Login and Password. All I can tell you is that it is written in PHP. There are many graphs, all of them print from IE but no not print from Firefox.
Cheers
James -
Can suddenly not use emoji in textmessages. Can send but not recieve.
can suddenly not use emoji in textmessages. Can send but not recieve.
Are any of you going to the Adobe Developer Conference scheduled to be held for plugin providers at San Jose on Nov 7/8?
-
Mail shows up in sent but not in inbox
just setting up the mail function - I am a mac.com member and using 10.3.9 - trying to send messages to myself to test it out. They show up in my sent folder but not in my inbox. Also - where should my mailboxes be located - under on my mac - or the other icon which mine is labeled home.
As you can tell - I don't know what I am doing.In your Mail Preferences you have the option to forward your self the message you sent.
By default it will only show up in the sent folder.
The options that you have available will allow you to change these settings.
Open your Mail and then click on the Mail Icon in the Menu Bar and then choose Preferences.
Don -
Mail Sent Items not Syncing with Rackspace Server
Hi,
My sent items are not fully syncing with my rackspace email account. Some items sent through Mail show up in the rackspace sent items and some do not. I am worried that emails are not being sent. Also, when replicating, Mail will show something like "outgoing messages 35 of 35", when I send a single email to a single individual. What is that all about?
Any help would be much appreciated. Thanks in advance.Hi All
Just to add my solution in here. I was gaving the issue where all of my mail had synchronised, and all of my ical and all of addressbook. However, my sent mail folder was not syncing, and worse still, no new sent mail was being saved off in sent mail.
Initially I thought it was a mailbox size thing, so I archived off the majority of my mail on another machine, deleted the sent mails, and then let the other machine sync with Exchange.
However still the same issue on a tiny mailbox. After seeing this thread (pointed here by Apple Tech support - thanks Clement) i deleted all sent mails on another machine, jumped back onto mac mail.app and all was well.
I still have a weird issue with delinquent emails in sent mail that wont delete, but I can live with that.
I too wish that Apple would make a more robust mail application - Apple ProMail as part of the iwork suite anyone?? -
Mail - sends but not visual signal
Hello,
We've got mac OS X Tiger mail sending mail perfectly well. I hear the little air plane sound go on, but the little gear next to "sent" does not show. Does anyone know how to make it happen? Thanks
chrisBruce Bridges wrote:
any ideas on why mail would send but not receive gmail?
What do you see for that account if you invoke Mail's menu option Window > Connection Doctor?
Pay particular attention to the settings under the "Advanced" tab for that account in the Mail preference "Accounts" panel. -
Mail sent does not reach destination
I am able to send mail from smtp.mac.com, or at least that's what it looks like, but the mail does not reach its destination. I tested it on myself. I have two accounts, .mac and another one. I sent mail from .mac to my other account and it didn't reach.
The problem started a few hours back. I got the typical "cannot send mail from this server ...." error message and I changed servers. Usually, it used to work with this change, but this time around it didn't. I deleted all servers that I didn't need, checked the connection doctor - it's connecting fine to the Internet, the activity Viewer shows the mail being sent. But, the mail does not reach where it is sent.
I don't have problems with my other mail account - just .mac.com.
Can anybody help?
PB G4 Mac OS X (10.4.7)A message is either sent or not sent and if not successfully sent for whatever reason, the message will remain in the Outbox mailbox and will not be moved to the account's Sent mailbox. If a sent message is available in the account's Sent mailbox, this indicates the message was successfully sent.
A successfully sent message is either accepted or rejected by the recipient's incoming mail server and if not accepted by the recipient's incoming mail server for whatever reason, you will receive a return email error message from the recipient's incoming mail server indicating why the message was not accepted.
Sent messages are usually received almost instantly for the most part but not always. Successfully sent messages do not take a straight line from the SMTP server used for the account to the recipient's incoming mail server. There can be delays along the way or a temporary problem with the recipient's incoming mail server. -
Outlook 2013 emails showing sent but not being rec...
Hi all
It appears that for the last few days any emails I have sent have not been received. They are not stuck in my Outbox and are sitting in my Sent items. If I run a test message from my Outlook profile, it sends and one time it has been received back. ic an receive emails from everyone else.
If I send an email from my Iphone for the BT email account ( Bt yahoo) emails are being sent and received.
My iPhone has the outgoing server as YAhoo!SMTP Server and server port 465. My Outlook has mail.btinternet.com and server port 587 as settings. I am using POP not IMAP and made no changes which might have provoked this problem.
This problem has just started suddenly. Probably from about Friday 23rd Jan.
Any advice welcome. I repaired the account in Outlook but this has had no effect.
Windows 8.1 is op system.
many thanksI think the fault may lie in BT. Have you seen the message displayed on bt.com/help and also on the log on page:
"BT Mail and BT Yahoo issue. We’re aware of a problem that may be preventing some customers from accessing, sending or receiving their emails. We’re sorry about this and are working hard to fix it as soon as possible"
I experienced the problem last week and over the week-end and spent many hours on the 'phone with BT Help people who were very good and, touch wood, it seems to have been resolved. I think it is an issue with the migration from Yahoo to BT mail. -
Status to Mail sent and Not sent
Hi,
I have a list of records which contains to whom i should send a mail.Below is the screen shot and procedure which gives me the records.
Now i want a stored procedure , In below screenshot if 1st record means if the mail is sent for 1st record it should mark as sent . and i should be left out with a records for which a mail is not sent.
From the below proc i have got these two records.
Please help me with the procedure.I am using SQL server 2008.
The mail sending process is all done through coldfusion. I just want to give a list of mails sent and if sent it should mark as sent and should be left out with not sent mails.
IF OBJECT_ID ('dbo.Mail_Send') IS NOT NULL
DROP PROCEDURE dbo.Mail_Send
GO
CREATE PROCEDURE [dbo].Mail_Send
@userid int,
@weekEndDate datetime,
@sessionUserID int
AS
BEGIN
IF OBJECT_ID ('tempdb..#Temp') IS NOT NULL
BEGIN
DROP TABLE #temp
END--IF
CREATE TABLE #Temp
[Action] varchar(50),
UserID int,
LastName varchar(50),
FirstName varchar(50),
WeekEndDate DateTime,
Reason Varchar(500),
To_email varchar(100),
SessionUserID int,
MFirstName varchar(50),
MLastName varchar(50),
INSERT INTO #Temp
SELECT
ts_ActionHistory_Action AS ACTION, ts_ActionHistory_tsOwner_usr_ID_FK AS UserID,lname AS LastName , fname AS FirstName,
ts_ActionHistory_WeekEndingDate AS WeekEndDate,ts_ActionHistory_comments AS Reason ,email,mgr_id AS SessionUserID,SUPFIRSTNAME AS MFirstName,SUPLastName AS MLastName
FROM tbl_timeSheet_ActionHistory TAH,
SELECT
ts_ActionHistory_WeekEndingDate as WeekEndingDate,
MAX(ts_ActionHistory_ActionDate) AS actionDate ,
ts_ActionHistory_tsOwner_usr_ID_FK AS userID
FROM tbl_timeSheet_ActionHistory
WHERE ts_ActionHistory_tsOwner_usr_ID_FK =@userid
and ts_ActionHistory_WeekEndingDate = @weekEndDate
and ts_ActionHistory_Action='Disapprove'
GROUP BY ts_ActionHistory_tsOwner_usr_ID_FK ,
ts_ActionHistory_WeekEndingDate
)TAH1
Inner join v_empSup AS A
ON TAH1.userID = A.usr_id
WHERE
TAH1.userID = TAH.ts_ActionHistory_tsOwner_usr_ID_FK
AND TAH1.WeekEndingDate= TAH.ts_ActionHistory_WeekEndingDate
AND TAH.ts_ActionHistory_ActionDate = TAH1.actionDate
Insert into Mail ([Action],FirstName ,LastName ,WeekEndDate ,MFirstName ,MLastName ,Reason ,To_email ,From_email )
Select
[Action],
FirstName ,
LastName ,
WeekEndDate ,
MFirstName ,
MLastName ,
Reason,
To_email,
From_email = (Select email from v_empSup where usr_id = @sessionUserID )
from #Temp
--Select * from Mail
END
Thanks,
DeepaCheck the area where i have set BOLD characters,
IF OBJECT_ID ('dbo.Mail_Send') IS NOT NULL
DROP PROCEDURE dbo.Mail_Send
GO
CREATE PROCEDURE [dbo].Mail_Send
@userid int,
@weekEndDate datetime,
@sessionUserID int
AS
BEGIN
IF OBJECT_ID ('tempdb..#Temp') IS NOT NULL DROP TABLE #temp
CREATE TABLE #Temp(
[Action] varchar(50),
UserID int,
LastName varchar(50),
FirstName varchar(50),
WeekEndDate DateTime,
Reason Varchar(500),
To_email varchar(100),
SessionUserID int,
MFirstName varchar(50),
MLastName varchar(50)
INSERT INTO #Temp
SELECT ts_ActionHistory_Action AS ACTION,
ts_ActionHistory_tsOwner_usr_ID_FK AS UserID,
lname AS LastName ,
fname AS FirstName,
ts_ActionHistory_WeekEndingDate AS WeekEndDate,
ts_ActionHistory_comments AS Reason ,
email,
mgr_id AS SessionUserID,
SUPFIRSTNAME AS MFirstName,
SUPLastName AS MLastName
FROM tbl_timeSheet_ActionHistory TAH,
SELECT
ts_ActionHistory_WeekEndingDate as WeekEndingDate,
MAX(ts_ActionHistory_ActionDate) AS actionDate ,
ts_ActionHistory_tsOwner_usr_ID_FK AS userID
FROM tbl_timeSheet_ActionHistory
WHERE ts_ActionHistory_tsOwner_usr_ID_FK = @userid
and ts_ActionHistory_WeekEndingDate = @weekEndDate
and ts_ActionHistory_Action='Disapprove'
GROUP BY ts_ActionHistory_tsOwner_usr_ID_FK ,
ts_ActionHistory_WeekEndingDate) TAH1
Inner join v_empSup AS A
ON TAH1.userID = A.usr_id AND TAH1.WeekEndingDate= TAH.ts_ActionHistory_WeekEndingDate
AND TAH.ts_ActionHistory_ActionDate = TAH1.actionDate
Left join Mail M on M.userID = A.usr_id AND TAH1.WeekEndingDate= M.WeekEndingDate
WHERE M.IsSent is Null
--LOOP BELOW SET OF STATEMENT FOR ALL USERS SELECTED IN THE ABOVE TEMP TABLE.
-- YOU CAN ACHIEVE USING CURSOR
-- DECLARE C CURSOR FOR SELECT * FROM #TEMP
--- example to send email, change the parameter accordingly...
EXEC master.dbo.xp_sendmail
@recipients = N'[email protected]',
--@query = N'SELECT * FROM INFORMATION_SCHEMA.TABLES',
@subject = N'SQL Server Report',
@message = N'The contents of INFORMATION_SCHEMA.TABLES:',
@attach_results = 'TRUE',
@width = 250 ;
Insert into Mail (IsSent , UserID, [Action],FirstName ,LastName ,WeekEndDate ,MFirstName ,MLastName ,Reason ,To_email ,From_email )
Select 'Y',
@userid,
[Action],
FirstName ,
LastName ,
WeekEndDate ,
MFirstName ,
MLastName ,
Reason,
To_email,
From_email = (Select email from v_empSup where usr_id = @sessionUserID)
from #Temp
------------- END OF LOOP
END
Regards, RSingh
Maybe you are looking for
-
i have a custom report made for UK, now i want to maintain that same report for US with some fields to be hided. where should i maintain this?
-
Logic for Calculating Pending Purchase Order Receipts
Hi, I am developuing one report which displays weekly production and inventory coverage details. I have a problem. i dont know how to calculate the pending puchase order weekly basis. Can any one help me Regards Guhapriyan.
-
Can I please get an answer as to if and how to download and install and use fully the Photoshop CC ($9.99/mo. plan) on my brand spanking new Apple MacBook Pro 13.3" with Retina display? Thank you, guys!!!
-
Extracting data from multiple tables, avoiding duplicates.
Hi I currently have two tables called Book and JournalPaper, both of which have a column called Publisher. Currently the data in the Publisher column is the Publisher name that is entered straight into either table and has been duplicated in many cas
-
Hi ! I am working with OA framework 9i ARU4 (11.5.10 RUP4) and tried to run /oracle/apps/cs/charges/newreport/webui/ChargesReportPG from JDeveloper. I've copied $JAVA_TOP/oracle/apps/cs to myclasses and $CS_TOP/mds to myprojects according to guidelin