Leopard AD bound but login freezes
Hello everyone,
We have Clean installed Leopard and successfully(according to the indicators) bound the system to AD. The problem we have is that when we try to logon using network credentials the login window grays out like it is trying to lon on but it just sits there. No beach ball, nothing. We have to manually restat the machine to login with a local account. Not sure what may be causing this. We used the same settings for AD that we used for Tiger and it worked great there but now we can't login correctly. Ideas?
I've unjoined the iMac from the domain and re-joined it, after disabling the UNC path option and the 'any domain in the forest' option. Still doesn't work! Gives me the "system is unable to log you in at this time" error message and only lets local accounts log in. Here's what shows up in the console and perhaps a smarter person than I could tell me what in the devil is going on.
+12/12/07 5:38:00 PM com.apple.DirectoryServices{11}+ *Enter machine password:*
+12/12/07 5:38:01 PM com.apple.DirectoryServices{11}+ *{2007/12/12 17:38:01, 0, pid=133} /SourceCache/samba/samba-187/samba/source/libads/kerberos.c:adskinitpassword(228)*
+12/12/07 5:38:01 PM com.apple.DirectoryServices{11}+ *kerberoskinitpassword [email protected] failed: Cannot contact any KDC for requested realm*
+12/12/07 5:38:01 PM com.apple.DirectoryServices{11}+ *{2007/12/12 17:38:01, 0, pid=133} /SourceCache/samba/samba-187/samba/source/utils/netads.c:ads_startupint(286)*
+12/12/07 5:38:01 PM com.apple.DirectoryServices{11}+ *ads_connect: Cannot contact any KDC for requested realm*
From my (highly limited) knowledge, it seems that there's a Kerberos problem passing the credentials to the server. Any ideas?
Similar Messages
-
Snow Leopard install - can't login to my account since install
I installed Snow Leopard last night, but since then have not been able to login to my own 'account' since them, am on a test account which I setup before, when having problems. The login only goes so far, it stops at the blank background and the spinning wheel spins for ages, machine chuggs, and then that's it. It does nothing, no apps, no hard disc icon, nothing. Just the photo I have on the background. HELP??? Anyone???
abi moore wrote:
{…} am on a test account which I setup before, when having problems. The login only goes so far, it stops at the blank background and the spinning wheel spins for ages, machine chuggs, and then that's it. It does nothing, no apps, no hard disc icon, nothing. Just the photo I have on the background.
Try Starting up in Safe Mode. (Be patient: Safe Boot takes longer than normal startup.)
If you can then log into your normal account successfully, it means something in that account is still causing problems, like a login item, bad preference file, etc. If you are lucky, the steps Safe Boot does to remove bad caches, etc. will fix the problem (see What is Safe Boot, Safe Mode? for more about these steps) & on a normal restart everything will be OK. More likely, it won't fix it & you will need to do more troubleshooting.
For that, it would help to know what problems you were having before you created the test account. -
Matias Keyboard No Longer Recognized by Leopard PB G4 But By Tiger
In February I took a month long trip with my Leopard-based PB G4 and Matias folding USB Keyboard. Everything worked together fine until after my return in early March when I noticed that the keyboard no longer worked with my laptop. Since my return I have received the normal Apple-push updates to my system. I tested the keyboard on my daughter's Dell laptop and it worked fine. I checked the keyboard with a friend's Leopard-based MacBook but to no avail. I called Apple Tech support and they initially informed me that it was not a Leopard issue because all third-party hardware should be automatically recognized by the computer. They also walked me through doing a reset of the computer to bring it back to original operating configuration. I contacted Matias who had their senior engineer look into the USB-capable keyboard and said they are not aware of any problems between the keyboard and Leopard. They also did not have a patch to push to me to get it connecting again but I will be keeping in contact with them about this. I brought my computer into an Apple store only to have them confirm that the keyboard is not being recognized by the USB drives, but there was nothing else they could do for me. I had the USB drives checked out a seperate computer store authorized to work on Apple computers and they both worked fine. At home, nothing that runs through the USB ports is NOT being recognized, everything works fine. While at the same computer store I found an older iMac using Tiger (10.4.7) and successfully tested it there after going through the normal syncing process. But on NONE of their Leopard-based Macs did it work which leads me to believe it is somehow related to either Leopard or an update everyone has received. While the folding keyboard may have only cost $99, I am hesitant to spend $75 for a service call at an authorized repair shop, and they advise me to re-consider having to visit them. Only because it is a great travel accessory for me to work on longer papers and projects rather than the laptop's own keyboard do I want to get this one working with my computer rather than buying another one. So my questions are, 1) how do I individually disable the updates received since March to determine which one is affecting recognition of the keyboard, and 2) why would the keyboard continue to work with Tiger and Dell but not on any Leopard-based Mac? Apple Tech's comments are primarily "it's not a Leopard issue, I should go somewhere else" to get it checked out.
The updates since March are:
Battery Update 1.4
Airport Client Update 2009-001
Airport Utility 5.4.1
Time Capsule and Airport Base Station Firmware Update 7.4.1
Front Row 2.1.7
iPhoto 8.0.2 Update
iLife Support 9.0.2
iWeb 3.0.1
iWork 09 9.0.1
iTunes 8.1.1 for Mac
iMovie 8.0.2
Server Admin Tools 10.5.6v1.1
Any assistance from the community would be greatly appreciated.
RickHi, Richard. In answer to your first question, you don't and can't disable the updates you've installed unless you use Time Machine to back up your Powerbook's hard drive. If you do, you can step back in time to just before the last software update, and restore that configuration to your hard drive. Then repeat the process for each previous update. This will be ungodly time-consuming.
If you don't use Time Machine, all you can do is reinstall everything from scratch up to the last point at which you're sure your keyboard was working properly, and then add the subsequently-released updates one at a time until you discover the one that renders the keyboard useless. Then reinstall everything all over again from scratch except that one update.
If I were you and were facing this incredibly tedious diagnostic process, I'd either return to running Tiger or buy a different keyboard. -
Question
Cannot log in to Nationwide internet banking. I get the front page but Login says internet banking is not working. Next screen says it's ok and sends you back to the first screen, which says it isn't. Works throughInternet explorerThat issue can be caused by corrupted cookies.
*https://support.mozilla.org/kb/Cannot+log+in+to+websites
Clear the cache and the cookies from sites that cause problems.
"Clear the Cache":
*Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
"Remove Cookies" from sites causing problems:
*Tools > Options > Privacy > Cookies: "Show Cookies" -
I have a football game recorded on a DVD+R disc that I was trying to view on my MacBook using DVD Player. The video comes onto the screen, but immediately freezes, and then disappears. An error message comes up saying that DVD player unexpectedly quit. My MacBook operating system is Mac OS X, version 10.5.8. DVD Player is App version 5.0.3, framework version 5.0.7.
However, the DVD+R works on both my Dad's and my brother's laptops. My Dad's laptop is an iBook G4 with Mac OS X operating system, version 10.3.9. The DVD Player is version 4.0. My brother's laptop is a MacBook Pro with Mac OS X operating system, version 10.7.2. The DVD Player is App version 5500.26.1 and framework version 5.5.0. The DVD+R plays fine on their laptops, but will not play on mine.
AnthonyLao Bo,
yes, you can locate and copy a file from your HD to a USB key using UNIX commands. If you know the exact name of the file which you’re trying to locate, try this:
find / -iname filename -print
This command will search your entire internal disk for the particular filename. If you know that it’s within a particular user account, then you can save search time with this variation:
find /Users/username -iname filename -print
Either variation of this command will print all files found which have the given filename. Presuming that you’re able to identify the correct file, you can copy it to a USB key using the command
cp -p filename_returned_by_find /Volumes/USB_volume
If you’re not sure which volume name your USB key has, this command will show you what the possibilities are:
ls /Volumes
Please let me know if you have any trouble with these commands. -
i'm trying to update my itunes to 10.5.2 but it freezes on about 55% and i can't sync my iphone 4s untill i updates... PLEASE HELP!
Have you disabled your virus protection?
-
I am new to mac's and have upgrade from Snow Leopard to Lion but......
I am new to mac's and have upgrade from Snow Leopard to Lion but not all my application will work. Is it save to reinstall using original snow leopard dvd and does it wipe all my other application like apature? I am in a panic over this, any help!!
I came across this online and i want to know is it safe to do this:
Backup your User folders to an external drive. This should preserve your documents, photos, music, etc. If you store those things in locations not in the User folder, make sure to copy those over too.
Insert the Snow Leopard disc. Restart your Mac and hold down C to boot to your DVD drive.
Go to Utilities in the menu bar once the installer pops up and select “Disk Utility.”
Find the drive in the sidebar where Lion is installed, select it and navigate to the Partition tab.
Click on the drop down menu under Partition Layout and select “1 Partition.” Hit Apply.
Now navigate to the Erase tab and make sure “Mac OS Extended (Journaled)” is selected, then hit Erase to delete all data on the drive.
Quit Disk Utility to get back to the Snow Leopard installer and proceed with the install.
Restore your User folder and documents from your backup.
Run Software Update to get everything current, install your apps from your original install media and update those as well.
if any one can help me that would be great, thanks MikeBefore you do that why not do this first:
Repair the Hard Drive and Permissions
Boot from your Lion Recovery HD. When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
To boot from the Recovery HD restart the computer. After the chime hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
If this doesn't help, then you can proceed to reinstall Snow Leopard as follows:
Downgrade Lion to Snow Leopard
1. Boot from your Snow Leopard Installer Disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed.
4. Quit DU and return to the installer. Install Snow Leopard.
This will erase the whole drive so be sure to backup your files if you don't have a backup already. If you have performed a TM backup using Lion be aware that you cannot restore from that backup in Snow Leopard. I suggest you make a separate backup using Carbon Copy Cloner 3.4.1.
This will erase the drive so be sure to backup your files before doing this. -
I have the latest version of Itunes but it freezes my whole computer when it starts up
I have the latest version of Itunes but it freezes my whole computer when it starts up. I have installed/reintalled Itunes but it still stops my whole computer when I start Itunes.
OK, so we rule out LSP then,
Try following steps one at a time and test your itunes:
1. Restart computer, right mouse click iTunes icon and select "Run As Administrator", now try your itunes.
2. If that does not work, check to see if this file APSDaemon.exe is the problem here.
Close your iTunes.
Press Ctrl-Alt-Del key and choose Task Manager. In the "Processes" Tab, select the file APSDaemon.exe and click End Prosses button, then close the task manager window.
Now open itunes and see if it is working?
If that works, to prevent having to do the same process everytime you restart Windows, go to. START button, type in
MSCONFIG
Hit ENTER
Click STARTUP Tab, Uncheck "Apple Push", click OK.
Restart Windows.
3. If that fails or you don't see ApsDaemon.exe in the Processes, refer to following article to remove SC files:
http://support.apple.com/kb/TS2363
4. If that fails, repair or reinstall your Quicktime. START / CONTROL PANEL / PROGRAMS N FEATURES / hightlight QUICKTIME and click REPAIR. -
My project file won't open in After Effects CC. Tries to, but just freezes.
Everytime I try to open my Project File in After Effects CC, it tries to open it, but then freezes. Really frustrating and this project is for a job that I am doing. Put in a lot of work to start over again. Please Help!
-Using After Effects Version 12.0.0.404
-Yes Installed the latest updates.
-Windows 8.1 Pro
- Running an i7 - 4770 3.4 GHZ - Quad Core, 32 GB of Ram, GPU- Gigabyte Radeon 7970 GHZ Edition, Have an 240GB SSD drive for the OS, 1.5TB and 2 TB Internal Hard Drives. 3 External Hard Drives 1TB, 3TB and 500 GB
- GPU Version - 13.152.1.1000 - AMD Catalyst Control Center Version 2013.0830.1944.33589
- No Third party I/O Hardware
- Wasn't using source footage as I was creating a 3D intro using Element 3D
- No error messages
- I was trying to re-open the project to work on it and it would go past the opening project file box then after that it freezes.
- It did work before. I haven't changed anything to my computer.
- Quicktime Installed Version 7.7.4 (1680.86)
- Element 3D within After Effects and Adobe Premiere CC
- Third Party Effects is Element 3D I think - No codecs installed.
- Yes I am using OpenGL in After Effects.
- Yes using Render Mulitple Frame Simultaneously
- Not using a Ray Traced 3D Renderer -
Just upgraded and iPhoto said it has to upgrade library but keeps freezing. Have tried it too many times now and I need those photos ASAP HELP!!
Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. .
Regards
TD -
My mac book pro on start up shows a white screen with a folder with a question mark in it then switches to the apple symbol with the loading bar under it but it freezes about half way. Only started to have problems since upgrading to yosemite any ideas.
I do hope you have recent backup, because it look like your hard disk is failing. You can start up in Recovery Mode, and run Disk Utility to see if the disk can be fixed: OS X: About OS X Recovery - Apple Support
-
ITunes works fine first time when i start it but then freezes
Hello,
I am using Windows 7 32bit version on my pc and when i plug in my iphone to pc itunes starts normally and everything works fine, but when i close itunes and try to start it again itunes starts but then freezes and i start the task menager and it says its not responding so i have to restart my pc in oder to itunes work normally...i tryed reinstalling itunes and i keep my windows 7 updated also all my drivers for hardware are updated with the leatest drivers.
So if you have some tip of fix or a patch please tell me because i am going crazy here...For your information:
http://kb.mozillazine.org/Error_loading_websites#Other_security_programs <br>
'''Quote:'''<br>
Note that some antivirus packages include web scanning features, such as AVG v9's "Link Scanner", Avast! "Web Shield" and Kaspersky "Web Anti-Virus", that process all HTTP traffic, which may cause intermittent timeouts and failed page loads (see below, under [http://kb.mozillazine.org/Error_loading_websites#Websites_randomly_do_not_load Websites randomly do not load]) .<br>
<snip><br>
Intermittent timeouts and failed page loads can be caused by web scanners bundled with certain anti-virus packages that process all HTTP traffic, such as Kaspersky "Web Anti-Virus" <snip> In such cases,
* In the Kaspersky "Web Anti-Virus" component, you can uncheck the "Scan HTTP traffic" option. -
I deleted my Mail app sometime back. I reinstalled it again, today, on my Macbook Snow Leopard Mac OS but when I try launching Mail, it says ' You have Mail version 4.0(1075/1085). It can't be used on Mac OS X version 10.6.8(Build 10K549)",
The Mail version for your machine is 4.6 (1085) You can get it via the Combo updater. Mac OS X 10.6.8 Update Combo v1.1
Then follow with software updates to pick up the most recent security and iTunes updates. -
After upgrading to snow leopard my MacBook Pro will freeze when I go to system Pref or it has been running for 40 minutes-making it impossible to close app's or power off properly...so frustrated. What fix can I download?
After upgrading to snow leopard my MacBook Pro will freeze when I go to system Pref or it has been running for 40 minutes-making it impossible to close app's or power off properly...so frustrated. What fix can I download?
-
The Iphone 4 patch IOS 7.6 is suppose to be a security update but it freezes the phone and doesn't reset. Help I need my phone. What makes the phone go back to normal? There is nothing but a simulated plug in wire and an ITunes icon on a black screen.
Hi SDPISMENOW,
If you are having issues updating or restoring your iPhone after attempting the iOS 7.0.6 update, you may find the following article helpful:
Apple Support: If you can't update or restore your iOS device
http://support.apple.com/kb/ht1808
Regards,
- Brenden
Maybe you are looking for
-
my old ipod has lots of music on it this was connected to a computer that was stolen, I now have a new ipod thats all connected with music on to my replacement computer, how can i get my old ipod music onto my new library and new ipod
-
LabVIEW : Why use anything else to write code?
I have been programming in LabVIEW for about 3 years now pretty heavily for both work and fun. It seems to me that if one is going to write most any type of program that LabVIEW is the logical choice. I was playing around with vb6 the other day and
-
NO REPAIR FOR 2 MONTHS PLEASE HELP
Hi All, I am revolted by the service Lenovo is providing, I switched from dell to this company to realize that dell was so much better. I have a problem with starting up my newly bought X1carbon second generation. I was told is was a motherboard issu
-
If I edit an item in a datagrid is it possible to add an effect to that entire row?
If I edit an item (default ItemRenderer) in a datagrid is it possible to add an effect to that entire row?
-
Create objects of distinct classes dinamically
I need to create a method that return and object of the class that indicated in a parameter. I'm not sure if this topic is related to factory pattern. I've a class: Parent I've some classes: Child1, Child2, ... ChildN that extends class Parent. And I