Leopard and Adobe Web CS3

Here is my experience with Leopard and Adobe Web CS3.
-Installed Leopard on my intel imac without a hitch
-Installed CS3 without any problems
-Flash CS3 runs great. PS and DW seems to run well too, but havn't got to take PS and DW through all its paces
One Caveat: the pull down menus in CS# that have the "more" arrow, the flyouts don't activate as smoothly as they should, I have to click on the "more" arrow to see the flyouts. At least, that is the way it is in Flash CS3. The flyouts activated on "Mouse Over" previously in Tiger.
I would very much like to see this fixed...Adobe....

Right now Adobe is saying things won't be patched until January. Hang in there! (adobe.com)

Similar Messages

  • Leopard and Adobe CS3 Products. Design and Video Production a must read.

    Adobe posted this pdf. http://www.adobe.com/support/products/pdfs/leopardsupport.pdf
    Should answer any questions on compatibility.
    Web designers are safe if you use CS3. Studio 8, your out of luck.
    InDesign CS3, Photoshop CS3, Illustrator CS3 is safe. CS2 your out of luck.
    After Effects CS3 must use update.....slated for December.
    Acrobat Pro 8, and any of Adobe video and sound production apps the same as After Effects.
    Regards,
    Ed

    Hello,
    Thank you very much for the answers, but for me it is already to late. I tried to install Tiger again, to be able to install Adobe Photoshop CS3 and then upgrade, but my iMac won't boot from the Tiger DVD even though it starts from the Leopard DVD. I have no glue what I am doing wrong. I pressed the "D" key during the boot - as stated in my manual and nothing happens. The machine just start Leopard from hard drive again.
    I also tried to insert the Tiger DVD while Leopard is running and then choose the Tiger installer, but it tells me, that it can not install on my machine. I do not understand anything.
    As far as I understand from Adobe, there should not be any problem to install Adobe Photoshop CS3. Nevertheless it definitely does not install on my machine (only the "shared components").
    Kind regards,
    Cornelia
    Message was edited by: Cornelia Menzel
    Message was edited by: Cornelia Menzel

  • RAM... Leopard and Adobe CS3

    hello
    ive recently purchased a new 2.4 macbook pro...
    maxed it out to 4GB ram with a 7200 rpm drive! running leopard and the adobe creative suite 3 master collection!
    Question 1)
    my computer tells me that i have 4GB of ram, but photoshop / after effects tell me that i can only make use of 3GB!
    why..?
    is it a software issue? or is it that 1GB is reserved for the operation of the OS? (10.5)
    Question 2)
    is there any way of finding out what speed my drive is?
    as a friend of mine has a Macbook Pro 2.2 with a 160GB 5400rpm drive
    when we look in> 'about this mac' then> 'more info' the details of both our hard drives are exactly the same!
    mine should be a 160GB 7200rpm! how can i confirm this? other than looking at the invoice/order details, does te system not list or recognize this information?

    1) This is an issue with Adobe Photoshop not letting anyone with more than 3GB. However, Photoshop can make use of Mac OS X memory caching which in effect allows it to utilise more than 3GB.
    Be aware that mac OS X along with any other applications do also use RAM so realistically on a 4GB machine it's probably not a great idea to allocate more than 3GB anyway.
    2) Do what Rajesh suggests.

  • Leopard and Adobe Photoshop CS2 problems...

    I've been reading the posts about Leopard and CS2 problems and have to say that I'm confused. A great many of you have had issues from the very beginning as soon as you upgraded to Leopard. I did not. I use a VERY basic set-up without third party plugins and suspect that to be why I had no problems. At least until now... I looked back through my documents to be sure, and my Photoshop was working beautifully through the first week of January. Somewhere between then and now there had to be an update from Apple that broke Photoshop. I haven't changed any settings since it last worked, and there certainly haven't been any updates from the greedy buggers over at Adobe because they don't support CS2 anymore apparently. What could Apple have updated that might have accidently corrupted my Photoshop?? I don't really feel it could be anything else, but who knows... Does anyone have any ideas? I would hate to have to downgrade to OS 10.4 just to use my Photoshop and I certainly can't afford to shell out the extra $$ for CS3.
    I appreciate any light you guys can shed on the topic...
    Stan

    Actually the 10.5.2 update does seem to have improved things for me with Photoshop CS1. I can now actually type entries into the little boxes for things like crop and brush sizes. The File Browser is still prone to crashing the application though, and there is still some weirdness with opening files by a drag and drop onto the app icon in the Dock. But nothing got worse, and several annoyances disappeared.
    One thing to try is to create a brand new admin test user, with no additions (that includes not adding fonts), log into the new account and see if Photoshop will work there.
    And speaking of fonts, do you have Linotype's Font Explorer installed? If so, did you get the new updater for it? Some people who use Font Explorer were having a lot of problems after the 10.5.2 update, including Photoshop failure to launch, that were fixed with the Font Explorer update.
    Francine
    Francine
    Schwieder

  • Leopard and Adobe CS1 on my iMac G4

    Hi everyone,
    I currently own a iMac G4 flat panel, 1.25GHz, 1GB ram. I'd like to upgrade my current OS (Panther) to Leopard.
    My problem is I own retail copies of Adobe CS1 (I'm an illustrator) and currently can't afford to upgrade to CS3.
    Will Adobe CS1 and Studio 8 run on Leopard? Are there any users here currently running these apps on a smiliar spec machine with Leopard?
    How should install Leopard if I purchase it, should I do a clean install or just an upgrade?
    Any help greatly appreciated!
    Thanks.

    hi p_d
    CS1 is "working" under Leopard but is no longer support by Adobe. This application have not been optimized for Leopard and may be buggy. But I have been able to install and work with CS1 on Leopard as many others.
    Beside, you should consider to add more RAM if you can afford. If you are doing graphic design, you will find you computer much much faster with even just 512Mo more or ideally 1Go more. I know that the old RAM required on G4 is a lot costly than actual RAM. But still, Leopard will use most of your RAM not leaving much for your applications.

  • Automator and Adobe Photoshop CS3

    Hi All,
    I have never used Automator so i am not sure if this is what it is for but I want to be able to apply a watermark to all my images by opening them from a folder in Adobe Photoshop CS3, applying the watermark image then saving and closing the image.
    Is this possible?
    Sorry if this is in the wrong area, i was not sure where to post it, it could even be an Adobe question???
    Any help is much appreciated.
    cheers,
    Andrew

    You have already received an answer using actions in Photoshop and this would give you great flexibility regarding your steps in the action.
    However, if you want to use Automator you can download "Photoshop Automator Actions v3.5". This set includes a watermark action as well as 85 other actions to be used with Photoshop CS3.
    You can find it here:
    www.completedigitalphotography.com
    Regards
    Paulk
      Mac OS X (10.4.10)  

  • Business catalyst and  adobe web hosting in Japan

    Hi ! I am new to here and confused about differences for business catalyst in Japan and United States.
    I have been learning how to develop web page using Muse, Dream Weaver, HTML, etc..for trial creative cloud before I buy.
    I live in Japan and I am wondering if there is much deferences between business catalyst for U.S. and Japan ( I guess Japanese version named Adobe Web Hosting)
    Using Adobe Web Hosting in Japan, It is so limited that I can do in online web application menu and system is not so complicated as U.S. business catalyst.
    because I am still in trial version or Is it limited like it in Japan.
    What I want to do with business catalyst is just create web page and put some product in for e-commerce and start little shop however there are no menu for e-commerce or even SEO things, etc...
    I may be still logging in U.S. business catalyst so I can use full servieces. but...
    if anyone know Please tell me.
    thank you.

    There is only one universal Business Catalyst.
    What I think is happening here is that the site you have created is under a plan that does not include eCommerce- so what you need to do is:
    Either create a new one under Web Commerce
    or
    Upgrade the existing one to a paid Web Commerce plan
    or
    Ask Support to upgrade your trial site to Web Commerce.
    Here is a link with some info on the hosting plans:
    Yearly Pricing | Adobe Business Catalyst

  • Snow Leopard and Adobe CS4 print to PDF

    Hi all,
    I recently upgraded to Leopard and noticed that while using photoshop and illustrator i can no longer choose Print->Print to PDF... I have to use this option because i print files via a network at school and I cannot send big .psd and .ai files. Any suggestions? I did some reading and discovered that Snow Leopard blocks that functionality.. so is there a work around or another way that I can print my files without them being really large.
    Thanks
    Matt

    The PDF drop down does not appear in Illustrator or Photoshop... I have access to it in Acrobat.
    The guys in the computer lab at school told me to do the following..
    1) From creative suite program. File-Save As-PDF
    2) Open that File in Adobe Acrobat
    3) Export file to Post Script File
    4) Re-Open that Post Script File in Acrobat and save it over the intial PDF file.
    Seems like there should be an easier way... (they are all PC guys)...

  • Snow Leopard and Adobe Photoshop CS4

    Hi!
    I've recently switched from custom built PCs to a Mac workstation, mainly for professional photography and editing purposes. I use photoshop roughly 12 hours a day (if not more...sigh), so switching to Mac would, in my mind, streamline and enhance my work experience.
    ...and it has!
    However, Photoshop CS4 will often crash when doing a "Save as", which is the whole reason behind my post. I've tried fixes found around the internet (rebooting in Safe mode, turning Open GL off, reducing the ram used to 50%....I'm at the one where they're telling me to turn off and on the network...we'll see how that works!).
    The other very strange thing with this whole thing, are 3 small scrambled windows that open with photoshop. I'll post a link to a screenshot :
    http://img403.imageshack.us/img403/949/screenshot20100115at105.png
    Obviously I'm posting this in this forum, because I haven't had any of those issues when I was on my PC.
    Oh, and as for the crash, it's more like a constant spinning beach ball.
    Any help would be appreciated.
    Specs :
    iMac i5
    8GB o' ram
    1 TB WD external USB2.0 drive attached, using Time Machine on it.
    OSX 10.6.2

    Have you talked to Adobe about this issue? I have used Photoshop CS4 on Snow Leopard, and havn't seen any issues. However, the scrambled windows look like what Top Sites in Safari looked like before they (supposedly—I still get it occasionally) fixed it in 10.6.2.
    Speaking of which, try re-installing the 10.6.2 combo update.
    Also, try using the uninstallers to remove Photoshop (don't forget to deactivate first), and then re-install it.

  • Macromedia Flash8 and Adobe Flash CS3 compatibility.

    I have macromedia Flash8 and am trying to open and edit Adobe Flash CS3 template and getting an unexpected file format error message. Are these softwares compatible or is there anything that I can do to enable me open and edit Adobe Flash CS3 template with Macromedia Flash8. Thanks

    Flash CS3 was developed after Flash 8, so like most software, older versions cannot open newer version files.  You would need to have the CS3 file saved as a Flash 8 file, which CS3 can do since it is one version ahead of Flash 8 and each version is capable of saving to the previous version.  You may lose some features if they were not supported by Flash 8.

  • MDM and Adobe Indesign CS3

    Hi everybody,
    does anybody know wether the new version of Adobe Indesign CS3 works with MDM 5.5 SP3 ? Or do i need a newer version/ SP for this software version?
    Thanks for your help!

    Frederik,
    As far as I know there is only support for InDesign CS & CS2 (& Quark 5.0.1) using the most recent version of MDM. The InDesign plug-ins provided with installation are for CS and CS2. As far as I know CS3 is not even shipping until later this month, so it will probably take a short time until SAP has a plug-in to work with MDM.

  • Leopard and Adobe programs

    I've heard recently that Leopard is not good if you are heavily reliant on Adobe programs. I'm a Graphic Designer so I use Adobe's extensively. I want to upgrade from my tiger to Leopard, but if this rumour is true, I'd rather wait until the bugs are fixed. Does anyone have experience with this to clear it up?

    Hi Cankman;
    My suggestion would be to clone your current system disk. Test the clone to be sure you can boot from it. Then upgrade to Leopard and test Adobe for yourself. If it works for you, you finished. If not go back to the clone for the system you currently have. Hopefully by have a way back to your currently running system that should not take too much time.
    Allan

  • FCP6 on Snow Leopard and Adobe CC on ML with GTX card in same machine?

    Hello, I have a couple 5,1 Mac Pros in a post production environment running Snow Leopard and FCP6. We would like to upgrade to Adobe CC and take advantage of CUDA with GTX cards. However, we still need to be able to open/re-edit old FCP projects for a while.
    FCP6 needs SL, while GTX cards need ML. My plan is to have each OS on separate HDDs and boot into the one we need at the time.
    Problem with this: The 5,1s currently have 5770s which require one of the two 6-pin power connectors but the GTX cards need them both.
    1. Is the best solution to open the case and switch which card is powered every time, depending on need?
    2. Is it ok to leave the non-powered card in the PCI slot while doing this?
    3. Is there a better solution to this problem?
    Thanks for any help.

    Separate machines if you can.
    The whole "drivers" and how you can't use that GTX in SL... I can run Windows with any card because drivers are available.

  • Snow leopard and adobe flash problem

    I can get the webcam from national geographic:
    (http://video.nationalgeographic.com/video/wildcamafrica/?source=emailwildcam20080908&email=wildcam)
    on my old imac G5 running leopard and my new imac running snow leopard using FIREFOX but NOT SAFARI. There is just a blank area where the webcam should be. I loaded the latest adobe flash 10 download but it still DOES NOT WORK. I don't know if this is a new SAFARI problem or SNOW LEOPARD problem. Any answers would be appreciated. Thanks.
    Stee

    are you able to play any videos posted in youtube?if you do. Then its not an SL problem. I tried the link that you posted and indeed it does not play. but i have a lot of websites that requires flash:
    youtube.com
    mini-clip.com
    facebook.com
    if its a problem with Snow leopard then I wouldn't be able to browse these websites. Isolate it one by one. It may be a content issue. and NOT SL nor FlashPlayer
    Tried it on firefox 3.5 and it works there but not safari. It maybe because the content is not compatible with Safari.
    Message was edited by: kisuke3

  • How can I syncronisch my allready bought dreamweaver cs3 and adobe photoshop cs3 on my windows surface pro tablet

    hi there,
    how should I sychronize my allready exsisting adobe photoshop cs3 adobe dreamweaver cs3 from my  home computer on my windows surface pro tablet 8.1@@

    Was this from disc or download?
    If from disc, you'll need to connect an external disc drive via USB to the Surface.

Maybe you are looking for