Leopard does not get installed on IMAC

hi all .. I have the flat panel Superdrive IMAC 1.25 ghz. with about 35GB space in it. I tried installing leaopard but it not only failed but also the leaopard DVD was stuck. I figured out how to remove the dvd but was wondering if I can install leopard on it ???

I am not likely to receive any help here but did not know whether to start the topic again or what.
Then never be afraid to start a new thread, especially in a case like this one where there is no clear solution found. Exhuming a old thread that goes back a month or more almost guarantees fewer "looks" from the community. A new thread gets the attention it deserves.
Consider posting a new topic in the Leopard Installation ands Set-up forum here:
http://discussions.apple.com/forum.jspa?forumID=1219
Be sure to give more information about your iMac, especially processor speed and RAM, and whether your optical drive can read DVDs. For installation problems, it's also useful to post the size of your hard drive and how much of that it available (example: "80GB hard drive; 31.2GB available").
The more you initially post regarding your Mac's details, the fewer "back and forth" posts are required to get the help flowing your way.
Allan

Similar Messages

OKI 5500n driver does not get installed......

I tried it on Macbook Pro intel and MacPro xenon.
in os 10.5.3 the printer just stopped working!!!
When I install the new driver from oki.com It appears that is is getting installed properly but I can not find the driver. I created a separate folder but still does not get installed!!!!
Please help!!!

I just got this working, after calling Okidata at 1-800-oki-data as someone suggested. I had tried installing all the drivers from the oki web site which apparently was not the best thing to do.
The final procedure that worked was:
1) Move Library/Printers/Okidata folder to trash and empty trash
2) Move all other folders in that Library/Printers directory, EXCEPT for PPDs) to a temporary directory on the desktop
3) Reboot
4) Install OSX5C5500E driver
5) Open System Preferences/Print&Fax
6) Click + to add a a printer
7) IGNORE THE OKI PRINTER THAT APPEARS THERE
8) Select "More Printers"
9) Under Oki USB, a printer driver will show up - choose that one.
10) Print - it works now!
11) Move other printer drivers back into Library/Printers
12) Enjoy using Okidata printer rather than buying lots of HP ink.

SP1 does not get installed when the machine is set to Japanese Language, software push through sccm 2012

Hi,
Please help me with the below issue, iam trying to deploy Service pack 1 on Windows 7 , 32 Bit OS
SP1 does not get installed when the machine is set to Japanese Language, software push through sccm 2012 , it does gets installed of installed manually, by remoting into the machine
also it gets installed through sccm when the machine is set to english language,
Thank you
Tanoj
OSLM ENGINEER - SCCM 2007 & 2012

Hi Friends,
we are deploying the SP1 via SCCM 2012 , and the success rate is around 50 %, its a Light touch installation where user will initiate the installation via Software Center ( Web based )
i was able to gather few errors , and this are the errors which failed during SP1 Installation 0x800f0828,
some errors which sccm reports display are
11171
10008
10021-
17031 -
1602 - User Cancelled installation
113 - No more internal file identifiers available
10070 - File handle reference is no longer available
10050 - A socket operation encountered a dead network
11170 - The task sequence manager could not successfully complete execution of the task sequence
i could not find the reason for some of the errors, also i am looking for a fix/woraround if any
Also i have noticed that in few computers the task seq failed at a place where after the sp1 installation a reboot happens and then PGP BYPASS utility is uninstalled, it did not start the PGP bypass uninstall after reboot
is there a way to cut short the Task seq and keep it simple ?
right now its like this
1. checking for prerequisite : checks for OS Name and OS version
2. installs PGP Bootgaurd Bypass
3. System Restart
4. Installing Windows 7 Service Pack 1
5. Final Restart
6. uninstall PGP Bootgaurd Bypass
Regards
Tanoj
OSLM ENGINEER - SCCM 2007 & 2012

The field point 4.1 software does not get installed, how to install the software and work on field point 20xx

We want to know the basics of installation of field point s/w and where to start from after installation.
Then we also need the details of HOW TO WORK in it. what are the other hardware and software that are necessarily to be installed along with field point in the PC. How to connect the hardware fp2000, to the PC.
Actually we tried installing the field point s/w, but we did not get the field point explorer icon to continue working.

Hi.
You can find informations in the NI Developer Zone (Distributed I/O -Fieldpoint)
http://zone.ni.com/devzone/devzone.nsf/webcategories/67EFA8729F4A7741862567E1006EDA74
and here for the Basics:http://zone.ni.com/devzone/conceptd.nsf/webmain/2124F6BBD29663D886256CB80054DBD7
Configure your fieldpoint in MAX.

Names.exe does not get installed when installing oracle

Hello Group,
I have installe Oracle 9.2 server on a Windows 2000 SP 4 machine and am configuring this as an oracle names server. The configuration is succesfull, however the service cannot be started 'coz the service is configured to execute the files names.exe from the folder c:\oracle\ora92\bin\names.exe.
However, i have searched twice but this file does not exist on the server. I am not sure if i am missing something.
Any help would be appreciated.
Thanks and Regards,
Ashish

Hello Ashish,
I've got the same problem after installation Oracle 9.2.0.1 for Windows.The file names.exe was missed.
And what is more I installed twice this product and in both cases I could find names.exe in bin directory.
May be I have to set special option for Oracle Names before the installation.
Did you resolve this problem?
Thanks for help.
Andrey

Recently I cannot view certain attached videos because I need the adobe flash player. It does not get installed and the system says it will do so once firefox is closed. pl.help

recently certain video or pictorial attachments to my e-mails be opened because the system requires the installation of the Adobe Flash player with Java plug-ins. The message also gives a link for installation. It appears to install but nothing really happens. Then the message advises that it will install automatically once security is uninstalled or when Firefox is off. Nothing seems to work. Please help. P.S. I recently also installed the Firefox 4.0 version also

1.Download the Flash setup file from here using Firefox: 
[http://fpdownload.adobe.com/get/flashplayer/current/install_flash_player.exe Adobe Flash - Plugin version]. 
Save it to your Desktop. 
2. Close Firefox using File > Exit 
then check the Task Manager > Processes tab to make sure '''firefox.exe''' is closed, 
{XP: Ctrl+Alt+Del, Vista: Shift+Ctrl+ESC = Processes tab}
3. Then run the Flash setup file from your Desktop.
* On Vista and Windows 7 you may need to run the plugin installer as Administrator by starting the installer via the right-click context menu if you do not get an UAC prompt to ask for permission to continue (i.e nothing seems to happen). 
See this: 
[http://vistasupport.mvps.org/run_as_administrator.htm]

Addon installer does not get installed when running BIDE setup

Hi all
i've download BIDE version 1.3.
After running setup the installer projects for VS2005 does not appear in the VS2005. any ideas what could be causing the problem?
appreciate the help
Yoav

I have the same problem,
pls visit the post:
Re: B1DE & B1TE for Visual Studio 2005 and .NET Framework 2.0

Oracle XE service does not get installed

Hi,
2 days ago downloaded Oracle 10 g Express Edition and installed on my computer. It installed succesfully and gave no erros. But when I tried to go to the homepage it failed to open. Then I check the services.msc and found that OracleXEService was not there. Then I uninstalled it and installed 11g XE Release2. But again the same problem. What's wrong with this? Does the OracleXE setup install both client and server side?

Well, there must be something going wrong on your system, and there should be some clue either in the installation process itself, or in the log files.
On my system, there are five logs in the directory named above:
cloneDBCreation.log
CloneRmanRestore.log
postDBCreation.log
postScripts.log
XE.bat.log
Do you have any of these? If not, you could try a silent installation as documented in the [url http://download.oracle.com/docs/cd/E17781_01/install.112/e18803/toc.htm#BABBCGHA]Installation Guide. That way you'll definetly get a log file for the installation. There is also a silent mode for a repair installation. Perhaps you could try that as well.
-Udo

Install Disk for Snow Leopard will not boot on an iMac 27in

My Install Disk for Snow Leopard will not boot on my iMac 27in. The Apple Logo is the only thing the user will see. The current OS on the system is 10.6.6. Upon placing the Snow Leopard DVD in the system, the DVD players spins for a few seconds and displays the Apple Logo. Nothing happens after 20 minutes.

Yes, it is ridiculous how it is impossible to install Snow Leopard. I have two Snow Leopard DVDs: one that I purchased for a Macbook soon after it's release (10.6.0), and one that came with my iMac (10.6.4). Both of these boot up my Macbook (running 10.6.7) just fine. My SL 10.6.0 DVD mounts onto my iMac (Lion 10.7.0), but you cannot run the install. I attempted to boot from this DVD and got the infinite white screen and Apple logo, as some have reported above. The other SL 10.6.4 DVD will not even mount in Lion, and will not even show up as a bootable drive when I attempt to select it after holding alt/option on reboot.
I created a bootable external drive from SL 10.6.0, attempted boot, same infinite white screen/apple logo.
I created a bootable external drive from SL 10.6.4 on my macbook. I attempted to boot from this drive, and got the white screen of death, except that this time I actually got the loading symbol underneath the Apple logo. After about a minute of attempting to boot, the Apple logo changed to a circle with a diagonal line through it (the "NO!" sign).
I took my iMac to the genius bar. They inserted SL 10.6.0, which would not boot. Then they determined that my computer had to run 10.6.4 and later. So, they restored an image of SL 10.6.4 onto my partition (not an install from an image, but an image of SL already installed). Hurray! Snow Leopard was successfully shoved onto my iMac!
I then deleted a third partition on my hard drive I did not need anymore, which somehow screwed up my SL partition (even though it said "Will not erase partition SL or Macintosh HD). Now I am back at square one, and I guess I need to take my flippin iMac back to Apple for them to do what I should be able to do.
I like Apple, but sheesh do I hate Lion right now.

Leopard does not support reading/writing to SD card via network?

I have a Pixma MX700. I can read and write to SD cards using the card reader built into this machine ... IF I use Windows XP. Leopard will mount the card and allow me to view it contents but the minute I try to import a file to my iMac, I get error code 1401.
I've been told by Canon support that the new MP Navigator EX driver for Leopard disables reading from the memory card over a network. They claim Leopard does not support this function and reading the posts from others having the same issue using different multi-function printers, this would appear to be a Leopard issue, not a Canon issue.
Can anyone confirm this and/or offer a fix?
Thanks!

Hi,
Could you check for SAP Note 1952701 - DBSL supports new HANA version number
Regards,
Gaurav

Audigy 4 Pro - I/O Hub does not get any po

Hello all,
I purchased an Audigy 4 Pro a few days ago and I cannot get the external hub to power on.
This somewhat sumarizes what I tried so far:
. Uninstalled all drivers and software of my old Soundblaster Li've 5. Platinum
2. Also removed all entries of the old soundcard from Device Manager
3. Powered down the PC fully, took out the Li've 5. and powered it back on and logged on to my Windows XP (SP2).
4. Just to be sure before installing the drivers for the Audigy 4 Pro I cleaned out the cookies, temporary internet files, all other Temp folders, the Prefetch folder and also ran a program to clean the registry.
5. De-activated my Norton AntiVirus Corporate Edition's Real-time protection, it's services and also my ZoneAlarm Pro from starting up the next time I reboot Windows.
6. Powered down the PC again, took the power cable out, made sure there was no power whatsoever left and carefull inserted the Audigy 4 Pro card in an empty PCI slot.
7. Connected the larger AD_Link to the card, then to the hub
8. Connected the smaller AD_Link to the card, then to the hub
9. Finally connected the power convertor cable to a free systems power unit
0. Double-checked the entire hardware setup a few times and power the PC back on
. Windows XP detected and installed the OHCI Compliant IEEE 394 Host Controller and the 394 Net Adapter
2. Canceled to proceed looking for a driver when it found the Audigy 4 Pro card
3. Installed the drivers and applications that came with the Audigy 4 Pro. Everything went smooth - no error messages during the installation.
4. Rebooted PC after prompting to do so.
5. With ZoneAlarm and my Norton Antivirus de-activated, all drivers and programs installed properly the external I/O hub does NOT get any power. I also made sure to check this with the remote control.
I have ofcourse no sound coming out that hub when plugging in my headphone and also cannot use my microphone.
6. I ran the Diagnostics program that was installed automatically with the other Creative applications: It claims there aren't any problems.
7. Powered down the PC again, checked all connectors, powered the PC up again: Same problem... no power.
8. Installed the latest 4-in- drivers found on viaarena.com: Same problem
9. Uninstalled and reinstalled the drivers and applications: Same problem
20. Uninstalled and reinstalled the drivers and applications after taking out all other PCI cards and placing the Audigy 4 Pro card into an other PCI slot: Same problem
2. Set my BIOS to factory defaults: Same problem
22. Formatted the PC and reinstalled Windows XP (SP) with every update thinkable... Same problem
23. Formatted the PC AGAIN ( ! ) and reinstalled Windows (SP2) with updates .... Same problem
Another problem: Sent a detailed e-mail to Creative Support Europe.... Still NO respons after 48+ hours.
Anyone else should have a solution I would appreciate trying out, or if all fails I'll go for a Terratec model.
Thanks in advance!
PC Stats: Asus A7V266 - VIA KT266 Chipset (VT8366 North Bridge with VT8233 South Bridge) / BIOS version: 0 / AMD Athlon .4GHz / 52Mb
Message Edited by HilTek on 07-05-2005 :04 PM

Amazing, I got mine about 3 days ago and have been pulling my hair out trying to resolve the same problem. I have checked power connections, reinstalled drivers. I think something is wrong with the box. I tried to call support yesterday, which was a Saturday, but they aren't available til Monday. I guess I will call them Monday. Let me know if you find anything out in the mean time.
Thanks
John
AMD Athlon(tm) 64 FX-57 Processor
A8N-SLI Premium
NVIDIA GeForce 7800 GTX
GB RAM
WIN Pro x64

My itunes does not get the names of all tracks which i import.

When i import a cd into itunes, it does not get any track names. Why is this.
Also, itunes does not connect to the music store. It tells me that i should check my connection etc etc. Are these problems related, and what can i do to fix it?

Let me guess, did you just install/upgrade iTunes?
If so, then it's surely your security software (firewall, web accelerator, privacy filters, etc) that is blocking iTunes.
The iTunes "upgrade" is actually an uninstall, then total new install, of iTunes and QuickTime. Many security packages such as Norton, Zone Alarm, Google Web accelerator, McAfee, PCillin (...the list is long) see this new iTunes install as a malicious threat, and block out the previous settings without telling you.
Go to your security software vendor's website and see if they have directions for allowing iTunes & QT back in the list of programs allowed to access the internet.

Problem with Adobe Extension Manager CC. Does not show installed extensions.

Adobe Extension Manager CC does not show installed extensions for Photoshop CC 2014 or Photoshop CC so that I am unable to uninstall extensions. This means that I cannot install updates to extensions.

Hi JJ - thank you for getting back to me. I got onto an Adobe tech and we tried various things including re-installation of Extension Manager, which didn't fix the problem. We then updated Photoshop (I was one point release back) then re-installed EM and this has fixed the problem.
I did check online and quite a number of people seem to have had this problem, so I guess Adobe has fixed whatever bug was in there.
Thanks!
Robert

Applet does not get loaded when viewed in a browser

Hi,
I have an applet,which works fine when I use appletviewer to see it. But from the browser, the applet does not get loaded.
An error appears at the bottom of the browser that load: class not found.
Any suggestions...please..
Thank you....
Pooja

If you are using Internet Explorer, you should check to see if your browser is set to use Sun's JRE that came with your download of the SDK. (If you didn't install the JRE, you need to go back and run that on your machine. You can check to see if you are using Java's runtime enviornment (JRE) in Internet Explorer by opening IE and going to Tools --> Internet Options... --> and then going to the Advanced tab. Scroll down and make sure the box next to Java Sun "use Java 2 for <applet>" is checked. If that option is not available, you need to install the JRE.
If that doesn't help, try using the HTML converter that comes with the SDK. It'll take your current HTML page, and you can customize it to force a download and/or usage of the JRE for applet viewing if for your particular browser.
Hope one of these helps!

Can dld newer versions of Frfx but they are not getting installed?

I am able to dld newer versions of firefox but they are not getting installed ... Currently 'about firefox' shows my version to be 27.0.1 but when I go into the troubleshooting option it shows I have version 28.0 and 29.0 in my update history. Please advise. Thanks

Hi Irishman,
Have a go at the suggestions that follow and then post back with how you get on.
Obviously I have seen your post, and sorry you are having problems. Unfortunately this is likely to be because you did not take enough care on the Internet. It is all too easy to go to bad websites and pick up malware that once downloaded does things you may not like or expect.
Explanation 
'''This is not anything to do with Mozilla Firefox''', other than it is the browser in use. Such software is not bundled with or downloaded with Firefox installs or upgrades. ( You may get an option of thumbnails in otherwise blank spaces in newtabs in a version of Firefox later this year but that is a different subject)
Finding such adware may be problematic, after all it is either downright malware which will try its best to evade being found and uninstalled, or it is adware that a minority of people actually like and deliberately download and install, usually after clicking small print saying this will happen.
Suggestions to try to Uninstall or Remove Adware
First thing to try, check which search engine is selected ? Because this is so simple and could have an effect it is worth checking what Search engine is selected for the Firefox Searchbar. You may have changed that, or software may have,and that will affect other searches including those from the address bar and the start page. All you need to do is click the little downward pointing arrowhead in the search bar and check what is in use and what is available. In most countries Firefox uses Google by default.
Check the shortcut Icons - has an address been added ? Right click the icon on the desktop used to start Firefox has an address been tacked on to the end of that. If something has changed that Firefox goes to that address as it starts up. For comparison use a run command directly. In Windows & with Firefox not already open Use keyboard shortcut Winkey+Run then when you get the run option key in ''firefox.exe'' & hit return. That will run Firefox without any extra instruction.
Adware removal 
I you have got adware, or unwanted software especially if it also affects other browsers (So check the use of Internet Explorer) look for anything unexpected installed in the Windows OS, use the Windows Control Panel. especially if only Firefox is affected check what is installed as extensions and plugins by using the addons manager.
* USE '''New button -> Addons ''' Or navigate to ''about:addons'' ,by keying that into the addressbar
* Also see
** [[Remove a toolbar that has taken over your Firefox search or home page]]
**And this slightly dated article [[What to do when searches take you to the wrong search website]]
I will make a follow on post detailing malware removal steps. Note it is important to use up to date and multiple tools, not just your one favourite. No single tool detects everything. This one is particularly useful with adware problems
* * '''[http://www.bleepingcomputer.com/download/adwcleaner/ AdwCleaner: (for adware)]'''

Leopard does not get installed on IMAC

Similar Messages

Maybe you are looking for