Leopard Install Disc won't restart into installer.
I have a G5 quad core and am trying to install Leopard from my family pack installation disc. My superdrive is malfunctioning and will not accept any discs (spins as though it's loading, clicks and tries again, only to spit the disc back out). I purchased an external DVDRW drive by USB quite a while ago because of this. I put the disc in, I can double click to install, it asks me to restart and on restarting it loads right back to asking me for my password. I have tried holding down "c" on restart and the Install Disc never shows up. I have tried holding down "option" on restart and only my hard drive shows up. I tried to load from another computer that I have assuming to share it's drive, but when holding "option" on restart it doesn't give me an option to pick a network.
I'm Lost, Please Advise! Thanks.
A PPC such as your G5 will not boot from a USB connection. However assuming that the other computer has a FireWire port, you can probably "borrow" its DVD drive to install Leopard, even if the other computer is an Intel. You will need an appropriate FireWire cable that can connect the two computers.
I would try the following:
Shut down the G5. Insert the Leopard DVD into the other computer, and restart the other computer while holding down the T key, booting the other computer into [FireWire Target Disk Mode|http://support.apple.com/kb/HT1661] . Connect it to the G5 and then start the G5 while holding down the Option key. This should boot the G5 into the startup manager, and hopefully you will see the Leopard OS X install DVD as one of the startup choices. Select that, and proceed with the Leopard installation. Be sure you pick the correct "Macintosh HD" (the G5's HD!) for the install.
Similar Messages
-
Leopard Install Disc Won't Mount on PowerMac G4
I'm having problems installing Leopard and am looking for advice. My internal DVD reader won't mount the installation disc - this has been a long-standing issue with my DVD drive: it can read some DVDs but not others. This is only the second time I've had trouble reading an actual Apple-manufactured DVD, though. (The first time, it was iLife - I eventually got around the problem by using a third-party DVD drive to install iLife, and that worked fine.) This time, though, while trying to install Leopard from the external DVD drive, the installation failed halfway through. This happened twice in a row, and I had to go back to my original system discs that came with the computer and reinstall the original system (10.2) in order to get my computer working again.
Now, I have two questions that arise from this. One, is this DVD-reading problem on my internal drive something that can be fixed with a Firmware update or something? I've searched without success. Or does the drive have to be replaced completely?
Second, is the problem with trying to install from the external DVD drive likely to be an issue with the Leopard install disc being a dual layer disc (if it is - I have no idea), and maybe the reason it fails halfway through is because my external DVD drive is only able to read one layer of the DVD? Or am I completely barking up the wrong tree with this one? Is it just a bad idea to try and install from an external DVD drive, full stop?
Colour me baffled! Any advice gratefully received.I do not know for sure, but as the Leopard install DVD has a capacity of over 7GB it may well be a dual-layer DVD.
Assuming your G4 PowerMac otherwise meets the minimum requirements for Leopard (867 MHz or faster, 512 MB memory, 9GB free space on hard drive, etc.) it is possible there is a flaw in the DVD. When you attempted to install did the installer successfully verify the DVD? You could try using Disk Utility to verify the DVD.
You might consider a new internal DVD drive. I had to replace the optical drive in my G5 when it failed. They are quite reasonably priced here: http://eshop.macsales.com/shop/optical-drives/superdrives/powermac/
Do you have an external FireWire hard drive? Did you attempt to install Leopard on that drive? -
Install disc won't re-install Leopard on my Macbook
So, I recently upgraded my Hard Drive in my Macbook. After I upgraded, I thought it would be cool to have Windows XP on my Mac also. So I partition 20 gb of my Hard Drive off for XP. I ran boot camp to install XP and I kept getting an error. This left me with an empty partition of 20 gb on my Hard Drive. I read many posts on here and I decided that the best thing to do was to re-install Leopard completely and start over, fresh and clean. Well, I put my Leopard install disc into my dvd drive, and when the install starts up, I get an error message that says, "Mac OS X can not be installed on this drive." Also, the install disc will not eject, even before the install starts. My hard drive is completely blank right now, and I have no idea why my install disc won't work. What should I do?
Open Disk Utility again (from the installer DVD), click on the drive's name as described in the previous post, & click the blue "i" button to get the disk's info. Copy that to a reply in this thread so we can see it. Or just note the "Partition Map Scheme" info, which should say "GUID Partition Table."
If not, you did not succeed in repartitioning it, perhaps because you did not click the "Apply" button or something.
If so, make sure you are using the installer disk that came with the MacBook & not some other model-specific installer disk.
BTW, you can never eject the DVD if you have started up the MacBook from it, so that much is normal behavior. To eject the DVD, you must restart from some other boot volume. -
Leopard Install disc ejecting during installation
Had my HD go down.(I know, it's funny when it happens to somebody else.)
Replaced it with a new one and after some work, got it working with 10.4.11.
Go to load the Leopard install disc. (I purchased the retail version
and had Snow Cat running too.)
Restart begins to happen as I click the restart button to begin installation.
When Macbook comes back on, it spits out the disc and goes no further with the installation.
I've had some good technical help from people who know more than me.
Ruled out the dvd malfunction with the install of Tiger from the disc.
Ruled out the disc malfunction by trying it a Macbook Pro.
All the software updates are done as well as the update's updates.
I tried a firmware update, it came up 'you do not need this app."
I've tried holding 'c'. Something weird happened when I held 't' like
someone said to do. There's the option key hold down. The apple hold down.
Everything is spitting this thing out.
I'm stuck.
MJGended up replacing dvd drive with help from youtube. formatted. loaded leopard with no problem. thanks for viewing.
-
I used utilities to source my 10.6 snow leopard install disc to my main hardrive, and now when I turn on my computer the apple with the spinning wheel stays on the screen and stuck like that. How do I fix it Help please. I already tried all the commands such as Command R, Holding down the Option key, C and holding down shift at the start up but nothing happens.
initialy All I was trying to do was downgrade 10.7 to 10.6 .You have to consider the possibility the hard drive may be dying. If your data isn't backed up, try one of the tools below:
https://discussions.apple.com/docs/DOC-1689
Once you are sure your data is backed up, we can examine other possibilities. In the meantime call AppleCare for your original installation DVDs. You may need them. -
How can I get past a Snow Leopard install disc hang-up?
Trying to upgrade 2009 Mac Mini to Snow Leopard from 5.6.8. Install disc won't allow install to Mac HD because it insists Time Machine is using Mac HD for backups, but it isn't. Time Machine is using a partitioned 1T external drive. How can I get the install disc to acknowledge and upgrade on the internal HD?
Allan, There was exactly that file on the internal HD - and on each of the three partitions of the external drive. I dragged all such files to the Trash, which seem to eliminate much of the file(s), but the Trash won't empty completely because of a message that "BootX" is locked, as is "boot.efi" - though I'm instructed to hold Option and Empty Trash (which won't hightlight; actually a "continue" button is the only choice in a dialog box). So now I'm not sure any of these "locks" are clearing; I want to re-start the computer before trying to install Snow Leopard again, and I can't have this hung up in the Trash in any case. Anything more you could suggest?
Thanks so much for your response and help. -
Just bought new PC running Windows 8.1. I have Install discs for Photoshop 4 and an upgrade to Photoshop 7. Unfortunately the Photoshop 4 Install disc won't run as it's incompatible with 64 bit. How do I install Photoshop 7 on my new PC? Is there a place I can download the Install files from?
Pagemaker is ancient, obsolete and unsupported. It was discontinued over 10 years ago. (Though why it is still sold is a mystery.)
If you want to run PageMaker, your best bet is to use a Win2K or WinXP PC.
Otherwise move to Indesign or look at Serif's PagePlus or Scribus. -
How do I reinstall my operating system (Snow Leopard) after a hard drive upgrade. I did a Time Machine backup before the new hard drive was installed. I put in the Snow Leopard install disc and don't get the icon I'm supposed to double click to install Snow Leopard and then the backup.
HELP PLEASE!!Is the new HHD in the MBP?
Is the new HDD formatted Mac OS Extended (Journaled)?
Where is the old HDD? In an enclosure? What is on the old HDD, your user data? Is the Snow Leopard System on it?
Do you have a separate Time Machine Disk with your user data?
Answers to these questions should give an exact status of your situation so that one can proceed in the right direction.
Ciao. -
Where can I get an old PPC Leopard install disc?
I've got a Mac Mini G4 1.42ghz PPC 512mb ram. I need a leopard install disc but can't find one anywhere
This amazon page offers a variety of sources. Scroll down past the Snow Leopard offers.
http://www.amazon.com/s/ref=a9_sc_1?rh=i%3Aaps%2Ck%3Aleopard+10.5+disc&keywords= leopard+10.5+disc&ie=UTF8&qid=1415014195 -
MacBook Pro will not read Snow Leopard install disc.
Trying to install Snow Leopard on daughter's MacBook Pro, which is still on 10.5.8 so that she can install Lion. Her computer refuses to read the Snow Leopard install disc and keeps kicking out the disc.
Are you using a retail 10.6 disk that looks like this?
and not the gray install disks that look like this? The Gray Disks are machine specific and only have the drivers for the Mac that they shipped with. -
HELP - Reinstalling iLife from Leopard Install Discs
I have a question...
I need to reinstall ONLY iMovie and iDVD from the Leopard Install discs. (My computer came with Leopard and iLife 08)
If I click on the option "install bundled software only", can I choose which application to install?
If I can't choose, will my iTunes and iPhoto libraries be deleted because I reinstalled iLie '08?
Thanks!!!I may be wrong, but I was under the impression that iLife was not on the Leopard install DVD.
It comes on the system HD but that's it.
If you want to be sure, download Pacifist (yahoo for it - it's free and made by charlessoft) and see if you can find it on the DVD. If it's there, simply extract it.
I would backup your libraries in any case before doing anything. -
Mac OS X Leopard install disc -- optional developer installs -- help please
Hello. I have a question that I've been looking to have answered for a long time. Within the install disc for Leopard, there is a folder called Developer or something like that, and inside it are the installation packages for Xcode Tools, Web Objects, and Dashcode. I have installed these three packages on my computer (I am a computer programmer -- I have very little experience with Mac programming, but I want to get started with learning). Anyways, in addition to these three installation packages, there is a folder called Packages, and inside this folder are about twenty installation packages, with names like X11, WebObjectsDocumentation, gcc, java, and SDKs and earlier versions of Mac OS X and that kind of thing. My question is -- what are these? Are they separate from the things that the Xcode Tools package installs, or are they all included in that package? If I'm going to be developing on the Mac, are these things I am going to need? Any info in regard to this will be much appreciated. Thanks in advance.
My question is -- what are these?
They are sub-packages. The main XCode installer will install all the components by invoking the individual installers. The packages are separated in case you want to install the individual components (e.g. just install X11 without all the other parts).
As to whether you need them, that's only something you can answer based on what you're trying to do.
There's no harm in installing them even if you don't intend/expect to use them, other than eating a little disk space. -
Original install disc won't work!
Hey all, I am trying to take my eMac back down to OSX 10.2, which is the original OSX that it came with when I bought it. It had tiger on it and I can not get the original install disc to boot when I try and do a restart while pressing "C". On startup, it goes to the screen that says "You computer needs to be restarted, press your on button for several seconds". So, I just used DBAN to completely wipe the HD, hoping that would help it, since maybe it was having trouble since tiger was still on there. The HD is now completely wiped blank and the disc still won't mount. I put in my Leopard disc just to see if that would work and it booted right up and was ready to start installing. Why won't the original disc work? The disc looks brand new, there are no scratches or anything like that on it. Any ideas? Thanks for any input!
I'd need to check notes i don't have with me at the moment, but if I recall correctly, part of the update from 10.2 to 10.4 on an eMac involved a firmware update, which could be why you can't boot to the 10.2 disc anymore.
Most OS 9 programs run fine under OS X 10.4 using Classic. You could try reinstalling 10.4, then put OS 9 on from your original 10.2 set of discs; the exact steps will depend on just which version of the discs you actually got. See e.g. OS X: How to Perform Mac OS 9 Clean Install and Mac OS X 10.2, 10.3: How to perform Mac OS 9 clean installation with Restore CDs -
FCS 2.0.1 Install Disc won't mount
Trying to install on MBP 15 inch/Snow Leopard - The disc has been cleaned no scratches (only used once for previous install). Have tried to mount the disc on other MBP 15 inch and it won't mount there either. This is an upgrade from FCP6.
Is there a way I can get an exchange from Apple? I don't believe there are any other options at this point - and I seriously need to transfer the application to the new machine (other machine has been dropped and screen is failing/middle of 2 jobs/yada yada yada).
Thanks in advance for your help ...Can Disk Utility see the disc?
If not, try with an external DVD recorder.
If so, select the disc in the sidebar.
Go to File > New > Image From Device. It should have already selected the installer disc.
When you get to the Save Dialog, change the format to DVD/CD Master.
Don't change the name. Save where you want.
Double click the disk image to mount it and run the installer. -
I've got a 2007 15" Macbook Pro (MacBookPro3,1, Boot ROM version MBP31.0070.B07) which is currently running Lion and aside from the battery flaking out occasionally, it runs fine. I'm trying to install Leopard on it for testing purposes (I work in IT, and we try to have one machine running every version of every OS we support). When I try to start up using the "Mac OS X Install Disc 1" that came with the machine, it just spits the disc back out. This disk has Tiger (10.4), and the machine came with a "CPU upgrade" to 10.5. I've also tried booting to 10.5.4 and 10.6 retail discs with same result.
So, my best guess is that at some point, whether by a firmware upgrade or installing Lion, I've lost the ability to install any version of OS X OLDER than Lion. I can't seem to find any documentation for either firmware updates or Lion to support or disprove this assumption, though.Well in order to install Snow Leopard you will need a partition for that if you also want to keep 10.7 on the machine, you use the 10.7 Disk Uitity to create a new partiton on the drive, then option key boot (wired or built in keyboards only) from the 10.6 disk and install in there.
If you want to wipe and install only 10.6, the entire internal drive needs to be erased (hold option or c key boot off the 10.6 and use Disk Ulility, select the entire drive), then install 10.6.
The 10.6.3 white retail disk should still work unless it's defective, smudged, dirty etc or unless it's a gray or black disk from another Mac, then it won't work.
However it is possible Apple did send a firmware update down the pipe that won't allow booting of earlier OS X verisons, they did that with 10.4 and 10.5 supposedly.
Unless you didn't upgrade the EFI firmware or have a older copy to revert too, Apple won't provide older EFI versions on their website, only the newer ones.
It's possible in some magic way to extract the EFI firmware off the 10.6 disks and then create a EFI boot disk installer that will install the older EFI verisons, but I haven't explored that possibility.
Far as I'm concerned, Apple can keep their Lions and their machines, I'm not going along with them anymore if they continue on their ******** path.
Maybe you are looking for
-
Adobe photoshop album 2.0: sending photos to a folder
I previously used adobe photo deluxe but lost it due to virus. The disc is no longer available to reinstall so I am trying out photoshop album 2.0 to replace. I have windows me. I normally ftp photos from a folder to my remote site for Ebay. My quest
-
Sound Blaster Not Compatible With Windows 7
I recently installed w7 over my xp system. All was fine except it didn'y support my sb li've 5.1 digital card. Any ideas apart from trying updates (i have the lates already), what product my work with an older system
-
I have a website created in DW4 (helenginger.com) on my PC. I recently put DWMX2004 on my laptop and downloaded the site. Then I have been creating new pages there, trying to eventually update the site. They seemed fine during preview, so I FTPed the
-
I have alot of CDs that I rip into iTunes but for some reason whether I am connected to the internet or not it never shows the CD information when I try to rip the cd. Is it a problem with my computer? Windows Media Player labels my music so I was wo
-
I can't stop most of the apps on my phone that use high battery. Example Google play services and Google search, facebook messager, weather. Please help.