Leopard Install on Brand New MacBook Pro?

Hey guy's, I got my first Mac today. A lovely brand new Macbook Pro. I got a copy of Leopard in the box and have run an upgrade.
Was this right? As the computer is new with nothing on it and I have nothing to import of another Mac onto it should I just do a complete erase and install?
What's the best option?

wow thanks for the very fast reply! I'll stick with it then and see how it goes. I love the thing though. It's very sexy!! Bit peed that they bumped the 7200rpm drive up to 200GB today but never mind, not fussed by the CPU as it'll only use the battery more and this thing is fast enough!
Will the upgrade convert all the OS into the full 64bit?

Similar Messages

Adobe CS4 Indesign plugins missing when installed on brand new MacBook Pro. How can I get these missing plugins? Indd. files will not open

Please Help!
Adobe Chat doesnt deal with old products
Apple Genius Bar says to talk to Adobe.
HAD a 2008 MacBook Pro with Adobe CS4 installed
now have a brand new MacBook Pro (and used my time machine to back up from my old mac) and when trying to open InDesign files - gives a list of plugins that are missing and will not open the document.
I'm a graphic designer- so this is not an option..
Please Help!

You can install Adobe Programs ONLY from the originals installer which is provided from Adobe. Time Machine (which is a form of migration) will not result in working Adobe programs. As Bob said, use the Creative Cloud Cleaner Tool, which is also working for CS versions, to wipe out everything from Adobe and start with a clean installing.
I am not sure, if CS4 is running on Maverick, at least it is not supported officially, your are here alone. It might be so that you have to upgrade your software to a later version.

Unable to install Snow Leopard to a brand new Macbook Pro

I have a new MB Pro that I'm unable to install 10.6.3 onto. This is a machine I got for work, and it has a corporate image on it. I thought I'd be able to create an additional partition on the hard drive and do a fresh install of 10.6.3 on it.
If I just put the disc in and boot, holding down <option>, then I can choose the Mac OS Install Disc. However, after a few minutes, the DVD spins down and the machine just sits there.
If I boot into the existing partition, and run the installer from there, I can point it to the new partition and it starts installing. However, with around 36 minutes left, the machine reboots, and ends up sitting on the grey screen with the Apple logo. Again, I can hear the DVD drive spin down.
I tried this with 10.6.0 discs as well, but since this is a brand new machine I realized that it would probably need 10.6.3. Unfortunately, even that isn't working.
Is it possible that our IT department has done something that would prevent me from booting off of install media?
Thanks for any help...

It sounds like your computer is trying to use the install disk and is having some issues reading it.
Your IT department may have put a firmware password on the computer (http://support.apple.com/kb/HT1352) but I don't think this is the case as you are able to use the option key to enter the start up manager and select an install disk an start the boot process.
It might be time saving to just ask your IT department if there is something about the computer's setup that prevents you from booting to an Install disk. A basic task that many users want to accomplish requires that ability, repairing the disk with the install disk: http://support.apple.com/kb/HT1782
Make sure you are using the original install disk that came with the computer. If you are using the original Mac OS Install disk then check the disk in good lighting for scratches or smudges. A dirty or damaged disk may not respond like it should.
Do you have an original Mac OS X 10.6 Retail Install disk? If so, try using the C key or option key with that disk. It should at least start up using that disk and eventually (1-5 minutes) bring you to the Language Selection screen. If it does then you have dirty or damaged install disk. Try cleaning the disk with a soft, clean, lint-free cotton cloth.
Hope that helps.

Clean Leopard install on a new MacBook Pro???

Hi all,
I have a brand new MBP, with Leopard on disk as provided in the box. I think it's an upgrade version, if there is such a thing. I have heard that it's a good idea to do a 'clean" OS install, to get rid of trialware and stuff, also to help system performance. has anyone used the disk enclosed in the box to do so? If so, did it work? Can I even do that?
Any help or advice will be appreciated!!
Thanks,
dave

It depends -- if the MBP already has Tiger on it, then you may have Tiger install disks and "CPU Drop-in" Leopard disk, which is upgrade-only (meaning a clean install requires installing Tiger first, then Leopard). (See here.)
However, the amount of free/trial stuff on your MBP will be pretty small (probably just iWork), and as getting rid of it is a lot simpler than it is in Windows a clean resintall is a) more effort than it's worth, and b) probably pointless as the software will still get installed. Just drag any unwanted apps to the Trash, and they're gone!

Can I run OS 10.6.4 on my brand new MacBook Pro?

I am a professional photographer and one of the programs I need in order to do my job is some software from Nikon that apparently will not run on Lion, OS 10.7.3. Documentation says that it can run on OS 10.6.4, Snow Leopard.
Can I run OS 10.6, Snow Leopard on my brand new MacBook Pro, 2.8Ghz, Intel Core i7 machine?

You cannot install any of them. As I said earlier your only options are 10.6.6 through 10.6.8 none of which are on a retail DVD.
If you have access to a Mac that runs 10.6.4, then you can put a small system on a 16 GB USB flash drive, boot from it then upgrade the system to 10.6.8. Now, see if you can boot your new computer with it. If so, then create a small partition on your new computer's hard drive large enough for the Snow Leopard system and whatever applications you need to use. Clone the USB flash drive to this partition using the Restore option of Disk Utility:
Clone using Restore Option of Disk Utility
Open Disk Utility from the Utilities folder.
Select the destination volume from the left side list.
Click on the Restore tab in the DU main window.
Check the box labeled Erase destination.
Select the destination volume from the left side list and drag it to the Destination entry field.
Select the source volume from the left side list and drag it to the Source entry field.
Double-check you got it right, then click on the Restore button.
Destination means the new partion on the internal drive. Source means the USB flash drive.

Snow leopard to Lion Upgrade on a brand new Macbook Pro

My brand new macbook pro (bought september 2011) came with snow leopard installed. Am I really expected to buy a Lion upgrade for a brand new product?

Not required.
Some have upgraded and want desperately to reinstall SL. Some are happy with the move. Some are not completely happy but will live with it and adapt.
Read here for the "new features" to see if the move is worth the risk to you http://www.apple.com/macosx/whats-new/features.html.
Regardless, first thing you need to do is get a mac-formated drive and make a TimeMachine or CarbonCopyClone (download for free) backup. The only common and provable issue with Lion upgrade is that those who do NOT make a backup regret not havng it when/if they reinstall SL.

How can I install logic pro 7.2 (made for power pc) on a brand new Macbook pro?

How can I install logic pro 7.2 (made for power pc) on a brand new Macbook pro with OSX 10.7.4?
This message appears: You can't open the aplication LogicPro.mpkg because power pc aplications are no longer compatible.
Thanks folks

You should be able to copy all the files from your old computer, although it might not work if the old machine didn't have an intel processor. When I got a new Mac a few months ago, I used the migration assistant to copy everything from my old computer's time machine backup disk. All my old pro apps, such as Final Cut Pro 6, work fine on the new machine under Lion.
Later, I wanted to install Soundtrack pro and couldn't do it from the original disks. So I installed it on my old machine and copied the files. It worked perfectly.

I can't watch YouTube videos on my brand new MacBook Pro with Lion. It says I need to download Adobe Flash Player but that won't install. Help!

I can't watch YouTube videos on my brand new MacBook Pro with Lion. It says I need to download Adobe Flash Player but that won't install. Help!

The same thing happens to me, Safari asks me to update the Adobe FlasPlayer, I download, start the installation process, ask me my username and password in order to install, then see a window where I choose if I want to always install the updates , or ask first, or not inslate updates, and at this point it is not progress, I can not cancel the process, I turn off and turn on my machine.
What can I do ..??
Regards.

Why did my brand new macbook pro come with Snow Leopard instead of Lion?

I JUST bought a brand new Macbook Pro assuming that it would come with Lion, but it didn't. My brother who just bought an Air the day before me got Lion with his computer. Shouldn't new computers come with new software? I'm confused. Can anyone help me?

You qualify for a free upgrade if purchased on or after June 6th. Follow these instructions to download your free upgrade.
http://www.apple.com/macosx/uptodate/
Regards,
Captfred

Brand new Macbook Pro not pairing with Apple Keyboard and mouse!

Hi all, I have a brand new Macbook Pro and an older wireless Apple Keyboard and Mouse (that were being previously used with my imac G5).
Now I want to use these for this macbook. I am finding that they are being recognised but not pairing up?
Do you need to stop the previous pairing with the imac before they will pair with the Macbook?
Or do I need to update specific software? (I would have thought it has all the necessary updates already installed).
I am running Snow leopard.
I have brand new batteries in the keyboard and mouse.
I really appreciate any helpful advice. Sorry if the answer is obvious!
Thanks

Hi there, i had a problem pairing an Apple wireless keyboard with my MacBook pro but managed to solve it.
The default passkey option in Bluetooth setup assistant is 'automatic' which will (if the MacBook can 'see' the keyboard in the first instance) then say something like 'your device may prompt you to enter the following passcode 1234 5678'
Obviously the keyboard doesn't provide any feedback - I went ahead and typed the number and hit the return key a number of times - the MacBook then displayed a 'pairing failed - you may have entered the incorrect passkey' message.
What i was doing wrong was keying only numbers - when i keyed 1234[SPACE]5678 + RETURN pairing worked.
I had thought the 'gap' in the passcode was to make it easier to read, not that it implied a space in the passcode.
Hope that helps.
Simon

Strange wifi problem on a brand-new MacBook Pro

Hey there, I'm new here. Desperation has got the better of me, and I hope I can get some advice.
So, last sunday I bought a brand new 13" MacBookPro with 2.8g i7 processor and 10.7.2 OS (I can't update to 10.7.4 because System Update tells me the download has been tampered with or corrupted after I waited 2 hours for it to finish, but I'm trying a direct download from the website). Here's the exact product: http://www.amazon.com/Apple-MacBook-MD314LL-13-3-Inch-VERSION/dp/B005CWIZ4O/ref= sr_1_5?ie=UTF8&qid=1340301247&sr=8-5&keywords=macbook+pro+13
Everything is all perfect except for a strange wifi problem. Note that the wifi does not turn-on or off, it doesn't disconnect after 'sleep', it doesn't get less speed, it doesn't constantly leave a preferred connection (once I chose my home wifi it always connects to it no problem). The wifi bar is always full. What is wrong is that the internet is kinda 'glitchy'. The best metaphor I can think of is that it's like a car that has to be pushed down the road before the engine can start. Please, bear with me because this is kinda hard to explain and I'm not good at tech lingos.
One of the symptoms is browsing can get really slow and inconsistent, almost as if the wifi gets turned off in the middle of browsing. For example: if I look something up on Google and then open 5 new tabs, probably only 2 or 3 of those tabs will eventually load while the other two will not get past the long 'http:.......google.....etc etc' address and will eventually show one of those 'error loading page because there's no Internet connection' notice. This happens a lot. Sometimes I have to refresh/retry loading a page a couple of times before it finally loads, then usually everything will get back to normal and I will be able to open multiple tabs with no problem, but in a couple of minutes I would try to open another site and the problem will start again.
So I tried to see how it does with downloading using iGetter. Fortunately I also have a Macbook (white-plastic casing one) and my brother has an old 2006 MacbookPro so I can compare. With those two older Apples iGetter starts receiving data in less than 8 seconds after I click Start, while my brand-new Macbook Pro can take up to 15-20 seconds, sometimes it doesn't even start at all and I have to re-click the start button. But once the download actually starts (on my new MacBook Pro), it downloads like normal, it doesn't stop and the speed is also as good as I can get. Strange huh? Hence, like a car that has to be pushed before the engine starts.
I also tried 'speed testing' from a website with all 3 laptops. On my old MacBook and my brother's MacBook pro, once I click 'begin test' it takes only a couple of seconds of 'ping' before the download/upload speed measurements start, but with my new MacBook Pro (just like with iGetter) it takes up to almost a minute before the measurements start, sometimes it won't start at all and I have to re-start the test.
Well, thanks for reading. And hope you can help me shed some light into this. Because it is really preventing me from really enjoying my new MacBook Pro. And if this is most likely a hardware problem, I'd better get back to the store and try to get it replace or something while it's only been 5 days. *cheers*

Hey guys.. Thanks for the replies. Unfortunately, I bought the MacBook in Indonesia where there are no such thing as an AppleCare. The only option is to leave the Apple product to one of the 'Authorized Apple care centre' and have whoever do whatever to it without guarantee of success. As for returning it and getting a brand new one, I also don't know if there is such a deal here, but that's actually a good idea, will try to go to the store tomorrow. Although, I'm worried that the problem might be with OSX Lion or something and getting a new one won't help.
mark75090, I've tried resetting the router when I first noticed te problem, didn't work though. I've checked my new MacBook's wi-fi (option+click wifi bar) and it says 'PHY Mode: 802.11g', so does my MacBook and the old MacBook Pro. I don't know what those mean though, and I don't know whether or not my router is an N., can you tell me more please.. I have tried with the other two turned off, and only the new MacBook using the wi-fi but the problem persists. I have also tried connecting directly to the router, but as I described, the problem is too subtle for me to notice the difference.
Also, if I create a brand new Wi-Fi connection in network preferences and connect to my router through the new Wi-Fi profile, the problem seems to be gone for an hour or so, then it always comes back though. I have also just finally installed 10.7.4, but it doesn't help either.

ITunes downloads fast on old Mac mini but slow on brand new Macbook Pro on the same WiFi network?

Hi all,
I have an old Mac mini that's from around 2008 and runs on Snow Leopard. I also have a brand new Macbook Pro with retina display that's running Mountain Lion. Both running iTunes 10.6.3.
I never noticed anything wrong with my MBP's connection speed until last night when I downloaded a free TV episode from iTunes. The download speed varied between 20KB/s and 40KB/s and it took me 7 to 8 hours to download a single episode. I checked my internet connection but there was nothing wrong with it, SpeedTest.net told me I had a download speed of 94MB/s and upload speed of 80MB/s, it was only iTunes that was unbearably slow.
Today I was browsing iTunes again and was planning to buy some movies, but again it took forever for the trailers to download. So I fired up my Mac mini just to see if it would be just as slow. Turned out my Mac mini could download the same trailers from iTunes at a much higher speed than my MBP (around 3MB/s on the ones I tested).
So what gives? They are on the same Wifi network provided by an Airport Extreme, and although my iPhone and iPad are also connected to it, no one else is doing any heavy duty downloading.
Thanks in advance!
Keywords: iTunes download speed, slow iTunes downloads, different connection speeds on different Macs, slow iTunes connection, iTunes takes a long time to download

It's possible the DNS setting your ISP is using are interfering. Although your PC works OK Macs can be sensitive to DNS settings. Here is a MacWorld DNS Troubleshooting article that explains the issue and below is how to fix it.
1. System preferences
2. Network
3. Click Advanced
4. Click DNS tab
5. Click + sign
6. Add 208.67.222.222
7. Click + sign
8. Add 208.67.220.220
9. Click OK.
10. Exit System Preferences
11. Try out your MBP and report what happened.
Roger

My brand new MacBook Pro won't turn on. What's the deal with this?

I got the thing yesterday. Sat down with it last night and everything started up fine. I set up my account and then it was time for updates. Naturally, I said yes to the updates. They downloaded, they installed, and that was the last time my brand new MacBook Pro turned on. I've checked to see that the battery is fully charged. I've tried plugging into other outlets. I've tried removing the battery and the power cord and pressing the power button for 5 seconds. Nothing has worked. When I put my ear up to it while pressing the power button, I can hear it try to start and get about 2-3 seconds in to start up and then a click and nothing. Does anybody have any idea what the heck has happened here?
15" MacBook Pro Mac OS X (10.4.6)
15" MacBook Pro Mac OS X (10.4.6)

actually i pass the 15 first days, i bought the mac in may, but here in spain the electronic components have a 2 years guarantee, i'll took to the store i bought soon couse it`s no normal so much hot

Brand new MacBook Pro- tons of permissions errors

So I just got a brand new MacBook Pro but am having some issues with it. I installed StarCraft 2 but will encounter a black screen that is unresponsive to anything (option-command-esc, for example), when I exit the program and once when I went to view a replay. I have to hold the power button down.
Blizzard told me that I should try to repar my permissions. Every time I do this, however, I get the same errors and they are never fixed. I don't know if this is causing my problem but this computer is brand new and I shouldn't have all these permission errors.
Here are the messages that I get:
Verify permissions for “Macintosh HD”
Permissions differ on "System/Library/Java/JavaVirtualMachines/1.6.0.jdk/Contents/Classes/dt.jar", should be lrwxr-xr-x , they are lrw-r--r-- .
Permissions differ on "System/Library/Java/JavaVirtualMachines/1.6.0.jdk/Contents/Classes/jce.jar", should be lrwxr-xr-x , they are lrw-r--r-- .
Permissions differ on "System/Library/Java/JavaVirtualMachines/1.6.0.jdk/Contents/Classes/jconsole.ja r", should be lrwxr-xr-x , they are lrw-r--r-- .
Permissions differ on "System/Library/Java/JavaVirtualMachines/1.6.0.jdk/Contents/Classes/management- agent.jar", should be lrwxr-xr-x , they are lrw-r--r-- .
User differs on "System/Library/Java/JavaVirtualMachines/1.6.0.jdk/Contents/Home/lib", should be 0, user is 95.
Permissions differ on "System/Library/Java/JavaVirtualMachines/1.6.0.jdk/Contents/Home/lib/dt.jar", should be -rw-r--r-- , they are -rwxr-xr-x .
Permissions differ on "System/Library/Java/JavaVirtualMachines/1.6.0.jdk/Contents/Home/lib/jce.jar", should be -rw-r--r-- , they are -rwxr-xr-x .
Permissions differ on "System/Library/Java/JavaVirtualMachines/1.6.0.jdk/Contents/Home/lib/management -agent.jar", should be -rw-r--r-- , they are -rwxr-xr-x .
Permissions differ on "System/Library/Java/JavaVirtualMachines/1.6.0.jdk/Contents/Home/lib/security/b lacklist", should be lrwxr-xr-x , they are lrw-r--r-- .
User differs on "System/Library/Java/JavaVirtualMachines/1.6.0.jdk/Contents/Libraries", should be 0, user is 95.
Permissions differ on "System/Library/Java/Support/Deploy.bundle/Contents/Resources/JavaPluginCocoa.b undle/Contents/Resources/Java/deploy.jar", should be lrwxr-xr-x , they are lrw-r--r-- .
Permissions differ on "System/Library/Java/Support/VisualVM.bundle/Contents/Home/profiler3/lib/deploy ed/jdk15/hpux-pa_risc2.0/libprofilerinterface.sl", should be -rw-r--r-- , they are -rwxr-xr-x .
Permissions differ on "System/Library/Java/Support/VisualVM.bundle/Contents/Home/profiler3/lib/deploy ed/jdk15/hpux-pa_risc2.0w/libprofilerinterface.sl", should be -rw-r--r-- , they are -rwxr-xr-x .
Permissions differ on "System/Library/Java/Support/VisualVM.bundle/Contents/Home/profiler3/lib/deploy ed/jdk16/hpux-pa_risc2.0/libprofilerinterface.sl", should be -rw-r--r-- , they are -rwxr-xr-x .
Permissions differ on "System/Library/Java/Support/VisualVM.bundle/Contents/Home/profiler3/lib/deploy ed/jdk16/hpux-pa_risc2.0w/libprofilerinterface.sl", should be -rw-r--r-- , they are -rwxr-xr-x .
Permissions differ on "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Classes/dt.jar", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Classes/jce.jar", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Classes/jconsole.jar ", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Classes/management-a gent.jar", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Home/lib/dt.jar", should be lrwxr-xr-x , they are -rwxr-xr-x .
Permissions differ on "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Home/lib/jce.jar", should be lrwxr-xr-x , they are -rwxr-xr-x .
Permissions differ on "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Home/lib/management- agent.jar", should be lrwxr-xr-x , they are -rwxr-xr-x .
Permissions differ on "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Home/lib/security/bl acklist", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Resources/JavaPlugin Cocoa.bundle", should be drwxr-xr-x , they are lrwxr-xr-x .
Permissions differ on "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Resources/JavaPlugin Cocoa.bundle/Contents/Resources/Java/deploy.jar", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Resources/JavaPlugin Cocoa.bundle/Contents/Resources/Java/libdeploy.jnilib", should be -rwxr-xr-x , they are lrwxr-xr-x .
Warning: SUID file "System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/MacOS/ARDAg ent" has been modified and will not be repaired.
Permissions verification complete

I did do a search for a similar topic and I did read that some permissions are of no concern. However, like I said the guys at Blizzard said that it could be the source of the issue. Also, like I said, even if I do "repair permissions" and it says that it completes successfully, it has not really done anything. Even if I run verify permissions immediately after, I see the same problems.

Brand new Macbook Pro Boot Camp boots to blinking cursor

I have a brand new Macbook pro running Mountain Lion and Boot Camp 5.0. I have made the disk needed for drivers and support and stuff. Installation looks like it was successful. It gets up through making an account and setting up windows update stuff (never gets to the desktop). After that it says preparing desktop followed by logging out followed by shutting down. It then restarts over and over again to a black screen with a blinking cursor. Anyone have any ideas? I have seen stuff about booting to the win7 disk and selecting repair and then command line to repair the boot efi stuff but since it never has a successful boot it never has a build to repair to. I am frustrated after 7 different installs of windows and a lot of time wasted.

I should add that I went as far as downloading a trial of parallels and imported by boot camp partition. It booted fine but when I tried to install the drivers and support files I got a message that said this version of boot camp is not meant for this hardware. I was thinking if it was hanging on something I could boot into it using parallels and fix it. No dice.

Leopard Install on Brand New MacBook Pro?

Similar Messages

Maybe you are looking for