Leopard Kernel panic - when rebooted main user account is gone

The title describes my problem well I think. My macbook running Leopard had a kernel panic. When I rebooted, the user account was gone. I booted from the Leopard DVD to reset the password, and reset the password of the root account and a mobile account - to which I have forgotten the password - with admin privileges. Neither one will log on. I'm pretty sure the mobile account will need the domain controller to successfully log on.
The root user I have never activated, so I suppose I can't use that. And without the ability to log in I can't seem to think of a way to activate it either.
There's a guest account available. And it works alright.

Will either of the two accounts log in while booted in safe mode (hold down the shift key at boot time)?

Similar Messages

Snow Leopard Kernel Panics when trying to Force Quit Applications

I have been having this problem for about a month now. I am a heavy After Effects CS4 user so this happens to me primarily when working in AE, but definitely is not exclusive to AE. I am working on a 8 Core 2.66 GHz MacPro with 8 GB of RAM. The only other variables are an AJA KONA LSe capture card and a ATTO Celerity FC-41ES Fibre Card. The videocard is the standard ATI Radeon HD 4870. My drivers and software are all up to date.

Hi Mike,
I have a very similar setup and am also using AE CS4 heavily. I am experiencing exactly the same issues, and have found that it is the multi-processing rendering app (aeselflink) that is causing the kernel panic when you force quit.
I have reduced the amount of times this happens by making AE only use 6 of the 8 cores available, in the Memory & Multiprocessing preference section.
I save my work before rendering or previewing and cross my fingers !
Nic

What is wrong with my user account?? Why do I get kernel panic when restart

Hi there. I got Leopard and was quite unhappy (don't think it was meant for a powerbook). So I started using Tiger again, and I flip flopped once or twice after the update came out for Leopard, thinking/hoping it would fix my problems. It didn't. I have given up on Leopard.
But, now Tiger seems to have a few problems of its own. I get the kernel panic when I restart my computer (telling me to restart), so I have to hold down the power button to turn it off and then turn it back on. Not a big deal, but if it shouldn't be doing that, I don't want it to, ya know? Never did it before Leopard.
My user account seems to be dysfunctional when it comes to downloading plug-ins for safari or firefox. I had to create a new user account and download the plug in from that account and then drag it into the HD to use it on my user account. I repaired disk permissions and booted from Tiger and did the same thing on there. After that, my user account is still not able to download that plug-in without getting errors (256)?
Is there a way to do a reinstall of Tiger from a blank slate, and be sure there won't be any problems?
Thanks!

Leopard will work with your Powerbook, the question is, is all your software and hardware ready for it?
Is there a way to do a reinstall of Tiger from a blank slate, and be sure there won't be any problems?
You can start from a blank slate, but if you have a hardware problem that started to generate itself, a blank slate won't solve it. It is called an erase and install. The first thing to do is backup your data*:
http://www.macmaps.com/backup.html
Once that is done at least twice, we can start looking at solutions for kernel panics*:
http://www.macmaps.com/kernelpanic.html
- * Links to my pages may give me compensation

When i upgraded to Lion, it deleted my main user account and only left my guest account, how can i fix this?

My main user account was deleted, and only my guest account remained. I don't know my password for the guest account anymore, so i couldn't log in, i had to use my time machine to restore to the day before when i was on 10.6.7. How do i fix this?

I've stumbled upon the solution to get back into our machines.
At the login screen, when presented with 'guest account' only, do the following:
tap enter while holding down 'control' + 'option' + 'command'
...you should be reunited with your usual login personalities.
Happy days!

Kernel panic when I try startx: edited again

I just reinstalled arch (slight mishap yesterday :oops: ) I'm running testing, have installed xorg, kde, ati stuff, etc. When I try to startx I get a "kernel panic not syncing". Has something to do with xorg configeration.
Any ideas :?:
If I just run xorgconfig no panic when I then run aticonfig etc panic.
For the moment I've given up on fglrx and am just trying radeon. the message I get says the system can't find the radeon driver :?:
# Monitor section
# Any number of monitor sections may be present
Section "Monitor"
Identifier "My Monitor"
# HorizSync is in kHz unless units are specified.
# HorizSync may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
HorizSync 30-96
# HorizSync 30-64 # multisync
# HorizSync 31.5, 35.2 # multiple fixed sync frequencies
# HorizSync 15-25, 30-50 # multiple ranges of sync frequencies
# VertRefresh is in Hz unless units are specified.
# VertRefresh may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
VertRefresh 50-160
EndSection
# Graphics device section
# Any number of graphics device sections may be present
# Standard VGA Device:
Section "Device"
Identifier "Standard VGA"
VendorName "Unknown"
BoardName "Unknown"
# The chipset line is optional in most cases. It can be used to override
# the driver's chipset detection, and should not normally be specified.
# Chipset "generic"
# The Driver line must be present. When using run-time loadable driver
# modules, this line instructs the server to load the specified driver
# module. Even when not using loadable driver modules, this line
# indicates which driver should interpret the information in this section.
Driver "vga"
# The BusID line is used to specify which of possibly multiple devices
# this section is intended for. When this line isn't present, a device
# section can only match up with the primary video device. For PCI
# devices a line like the following could be used. This line should not
# normally be included unless there is more than one video device
# intalled.
# BusID "PCI:0:10:0"
# VideoRam 256
# Clocks 25.2 28.3
EndSection
# Device configured by xorgconfig:
Section "Device"
Identifier "** ATI Radeon (generic) [radeon]"
Driver "radeon"
#VideoRam 262144
# Insert Clocks lines here if appropriate
EndSection
# Screen sections
# Any number of screen sections may be present. Each describes
# the configuration of a single screen. A single specific screen section
# may be specified from the X server command line with the "-screen"
# option.
Section "Screen"
Identifier "Screen 1"
Device "** ATI Radeon (generic) [radeon]"
Monitor "My Monitor"
DefaultDepth 24
Subsection "Display"
Depth 8
Modes "1024x768"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 16
Modes "1024x768"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 24
Modes "1024x768"
ViewPort 0 0
EndSubsection
EndSection
# ServerLayout sections.
# Any number of ServerLayout sections may be present. Each describes
# the way multiple screens are organised. A specific ServerLayout
# section may be specified from the X server command line with the
# "-layout" option. In the absence of this, the first section is used.
# When now ServerLayout section is present, the first Screen section
# is used alone.
Section "ServerLayout"
# The Identifier line must be present
Identifier "Simple Layout"
# Each Screen line specifies a Screen section name, and optionally
# the relative position of other screens. The four names after
# primary screen name are the screens to the top, bottom, left and right
# of the primary screen. In this example, screen 2 is located to the
# right of screen 1.
Screen "Screen 1"
# Each InputDevice line specifies an InputDevice section name and
# optionally some options to specify the way the device is to be
# used. Those options include "CorePointer", "CoreKeyboard" and
# "SendCoreEvents".
InputDevice "Mouse1" "CorePointer"
InputDevice "Keyboard1" "CoreKeyboard"
EndSection
# Section "DRI"
# Mode 0666
# EndSection
/etc/rc.conf - Main Configuration for Arch Linux
# LOCALIZATION
# LOCALE: available languages can be listed with the 'locale -a' command
# HARDWARECLOCK: set to "UTC" or "localtime"
# TIMEZONE: timezones are found in /usr/share/zoneinfo
# KEYMAP: keymaps are found in /usr/share/kbd/keymaps
# CONSOLEFONT: found in /usr/share/kbd/consolefonts (only needed for non-US)
# CONSOLEMAP: found in /usr/share/kbd/unimaps
# USECOLOR: use ANSI color sequences in startup messages
LOCALE=
HARDWARECLOCK="localtime"
TIMEZONE=Canada/Eastern
KEYMAP=us
CONSOLEFONT=
CONSOLEMAP=
USECOLOR="yes"
# HARDWARE
# Scan hardware and load required modules at bootup
MOD_AUTOLOAD="yes"
# Module Blacklist - modules in this list will never be loaded by hwdetect
MOD_BLACKLIST=()
# Modules to load at boot-up (in this order)
# - prefix a module with a ! to disable it
MODULES=(radeon)
# Scan for LVM volume groups at startup, required if you use LVM
USELVM="no"
# NETWORKING
HOSTNAME="normlx"
# Interfaces to start at boot-up (in this order)
# Declare each interface then list in INTERFACES
# - prefix an entry in INTERFACES with a ! to disable it
# Note: to use DHCP, set your interface to be "dhcp" (eth0="dhcp")
lo="lo 127.0.0.1"
#eth0="eth0 192.168.0.2 netmask 255.255.255.0 broadcast 192.168.0.255"
eth0="dhcp"
INTERFACES=(lo eth0)
# Routes to start at boot-up (in this order)
# Declare each route then list in ROUTES
# - prefix an entry in ROUTES with a ! to disable it
gateway="default gw 192.168.0.1"
ROUTES=(!gateway)
# Enable these network profiles at boot-up. These are only useful
# if you happen to need multiple network configurations (ie, laptop users)
# - set to 'menu' to present a menu during boot-up
# - prefix an entry with a ! to disable it
# Network profiles are found in /etc/network-profiles
#NET_PROFILES=(main)
# DAEMONS
# Daemons to start at boot-up (in this order)
# - prefix a daemon with a ! to disable it
# - prefix a daemon with a @ to start it up in the background
DAEMONS=(syslog-ng network netfs crond !kdm)
# End of file

KeepItSimple:
If you're getting a kernel panic when trying to install, then I'd start with RAM and the installation disks.
RAM: Panther has higher standards for RAM than does 10.2.x; if you have more than one RAM module, take one out (assuming that leaves you with at least 128 MB) and try again. If it panics again, try switching the RAM. As far a brand names go, I prefere Kingston or Azen RAM.
Installation Disks: if they're grey, they won't work. Grey installation disks are packaged with specific Macs, and only contain hardware drivers for that specific Mac. You need the retail version of the disks, which were sold in a black box. There are four CDs in the set, three of which are for installing the OS (the fourth contains Developer Tools). The three OS disks are black with a large silver X in the middle.
Good luck!
Andrew

Kernel Panic when Updating from Mac OS X 10.3.9 to 10.4.7 Server Software

I tried updating our G5 Xserve with the 10.4.7 DVD. Since I have only a CD drive in the Xserve, I used a Mac Mini in target mode with the Server Install DVD in the MacMini DVD drive. Upon restart at the beginning of the install process, I get a Kernal panic.
I have a Village Tronic MPDDpro graphics card with latest drivers. 1 GB of memory. (I also tried using an external DVD firewire drive, but get the same kernel panic when Xserve tries to boot from the OS X Server DVD)
I was unable to get the xrdiags to provide any output. Tried unsuccessfully to get a Mac Mini running OS X Server to Netboot properly, so tried with xrdiags on a CD. Again no output back to the terminal administering the xrdiags start.
I tried putting the Xserve in target mode and installing the 10.4.7 from the Mac Mini. Install process went through successfully, but when I rebooted the Xserve, and before getting to the Setup Assistant, I got the Kernel Panic again.
Needing then to re-install 10.3, I reinstalled the 10.3 Server with the original disks and updated to 10.3.9 and reinstalled all the application software and setup users etc, (days of work) all went well with 10.3.9 Server.
I need to get up to 10.4.7 soon!
Any ideas what to do next?
Xserve Mac OS X (10.3.9) Xserve G5 2Ghz with CD optical drive and MPDDpro graphics card

DaddyPaycheck
Thanks for helping. I'm green at this! Getting definite experience as you can see, but can you help me with an actual real live make and model of a graphics card that is known to work on the G5 Xserve?
I called ATI re: their Radeon 9200, and was told by tech support that they do not support this card on the G5 Xserve. Yet, Scott Maiden, in his post above, referenced an ATI Radeon card.
What cards are being successfully used? Can I have a list?
Apple Tech Support will not give any such list. Maybe they know of some problem with all? (When I bought the Xserve in September of 2004, Apple Tech Support recommended the VillageTronic card.) The new, yet un-released Quad-core 64-bit Intel Xeon Xserve has "built-in graphics functionality, with mini-DVI output and support for industry-standard VGA displays," according to Apple's web site. Hopefully this will eliminate this type of problem in future releases of Xserve. But for the nasty here and now...
All I need is an inexpensive graphics card to administer this Xserve. Currently I am using a 21” SuperMatch SVGA monitor.
Thank to all who have helped.
James
jamescalvin-
The only cards I have found to work reliably in the
G5 XServe are the cheap-arse PCI models. I do not use
my XServe for serious graphics work so I do not know
how it works with other cards.
Can you swap in a known compatible PCI card for
testing purposes?
Luck-
-DaddyPaycheck
DaddyPaycheck
Xserve Mac OS X (10.3.9) Need list of Compatible PCI graphics cards

Various process crashes prevent login to main user account

Here's a good one. I can't log in to my main user account; here's the recap:
Computer was acting slow and pausing a lot over past couple of weeks; I put it down to internet slowness at first, but after awhile I began closing down less-critical processes like .mac synchronization, mySQL, etc. Can't recall running any new installs recently, or updates, except perhaps Firefox.
Checked the logs, saw that my old pal mdimport was crashing repeatedly, like every 15 seconds or so. That will slow things down! So I turned off the Spotlight indexing for all categories, and eventually made the hard disk a private item. mdimport still crashing.
Ran permissions repair; some problems fixed, nothing too alarming in the logs (I think). Verified the hard disk; no problems found.
At some point the main account became unable to log me in. The login window accepts a password and disappears, but after a little while a blue screen appears, and the login window returns. I am able to log in using a secondary more-or-less virgin account on this machine, which seems to work fine.
Console logs reveal the constantly crashing mdimport, triggered anytime I attempt to log in using the main account. Secondarily, the loginwindow process is crashing on login (main account only) and crashdump itself is consistently crashing just afterwards. Occasionally another process called lsregister will crash at the login attempt, sometimes other processes too. More worryingly, there are reported IO errors from the kernel.
I've reset the pram, I've reset the nvram. I've booted from a 10.5 system disk and re-run disk utility for permissions and repair disk. I tried safe mode.
I've attempted to rsync my main user account to another computer while booted to target disk mode; rsync (running on the remote machine to which I'm copying the files) copies the many gigabytes in my Documents folder, but chokes consistently at some files in my Library ("former iDisk.dmg", App Support/firefox/profiles/etc, also some Growl files) with "Input/output error (5)."
Anyone have any good theories? Many thanks in advance.
--David H

Thanks for your reply; I checked out the links but nothing seems too directly related. I'm vaguely aware of what mdimport does, but I certainly have seen it crash a lot.
At this point, I'm finally able to log back in to my main account, which (with some caveats/questions below) seems to be working.
To get back to this point, I used the terminal utility Applejack to clear caches, check plists for corruption, and clear virtual memory. I also manually deleted a loginwindow plist and some Library/Caches/com.apple.LaunchServices/ files. Something in there seemed to help, and I'm finally back in to the main user account. There was definitely no getting into this account before I tried these steps.
Applejack is found at http://applejack.sourceforge.net/.
I still have some troubling log entries, and some blips in several files. While subsequently backing up my user account, rsync consistently tripped on several files in /Library/Application Support relating to Firefox and Growl, in /Library/iCal, and also a couple of image files (out of tens of thousands) in my Pictures folder. So I deleted these files; the only concern so far is the iCal file which was called "corestorage.ics." And now that I've started iCal, it looks like I still have data; but my console log shows about 70 lines of "Calendaring data empty." Ugh. Nothing like losing data but not knowing what was lost.
Also troubling in the system log: I have several entries of "kernel[0]: disk0s3: I/O error" (though not in the latest reboot cycle). Hard to tell if these belong in the same category as the many cryptic and possibly alarming messages seen there, or if this is a real warning of a failing hard disk, or of other corrupt files the system is running into. Again, disk utility has repeatedly found no problems.
(Also I have several hundred entries of "/System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/Metada ta.framework/Versions/A/Support/mdimportserver: _TIFFVSetField: tiff data provider: Invalid tag "Copyright" (not supported by codec)", which I hope relate to mdimport seeing many jpg images that have copyright metadata. I'm hoping that problem will go away now that they're marked "private" as far as Spotlight is concerned.)
At least I'm back in the account. I'm trying to decide whether to archive & install system 10.5; I'd prefer to reformat a misbehaving disk, but then you gotta have pretty serious confidence in your backups. Alternatively if the rumors are true I'm hanging on for one of the new laptops; I'd prefer that to replacing the hard drive again in this diabolical case. (Price you pay for sleek, I guess.)
Time will tell.

Kernel Panic when QT Conversion to MPEG2

Does anyone know why I would suddenly be getting kernel panics when encoding to MPEG2 using the QT MPEG2 Encoder.
I has been exporting using QT Conversion to MPEG2 form FCP for Months, but now I am getting kernel panics and program crashes everytime I attempt to export.
Any suggestions would be great.
Dual 1.8 GHz PowerPC G5 Mac OS X (10.3.9) 1.25 GB Ram

Funky software simply crashes a thread but the system will continue on. Kernel Panics, on the other hand, often come from significant hardware and/or system software issues which cause an unrecoverable systemic error.
Basic trouble shooting for serious issues might go like this:
FIRST AID
01 Completely shutdown, wait a 5 minutes, restart
02 Make sure you're not running out of free space on the System volume
03 Check/fix the filesystem using Disk Utility &/or Diskwarrior
04 Repair permissions using Disk Utility
05 Create a new user account, and see if the problem persists there
06 Clear system & user caches
07 Run FCP Rescue
08 Unplug all USB, Firewire devices except Apple mouse
09 Startup in SafeBoot mode, and see if the problem persists there
10 Reset system firmware
MORE SERIOUS TROUBLESHOOTING
11 Reapply the latest combo updater
12 Run the Apple hardware diagnostic CD
13 Check the hard drive for bad blocks
14 Take out 3rd party RAM
15 Unplug 3rd Party PCI cards
16 Reset PMU
17 Archive and reinstall the OS
18 Reinstall the system from scratch
19 Send the machine back to Apple
good luck.
x

Kernel panic when booting from DVD or external drive

Hey Folks,
I have a 13" MBP, seems to run fine for the most part.
However, I can't boot from DVDs or external hard drives. Disk Warrior, my and a tech support buddy of mine's OSX Snow Leopard DVDs, and external boot disks all cause a kernel panic when selected from the alternate boot menu when rebooting with alt.
The DVD/External spins up, the loading spinner goes for about 20-30 seconds, and then BAM - Kernel panic. I'd reinstall OSX... but I can't!
Any suggestions? I'd rather not send the computer to a tech for a week - I need it daily for work.

Kernel panic log:
Fri Nov 26 11:42:49 2010
panic(cpu 0 caller 0x2a6ac2): Kernel trap at 0x00000000, type 14=page fault, registers:
CR0: 0x8001003b, CR2: 0x00000000, CR3: 0x00100000, CR4: 0x000006e8
EAX: 0x57cd9408, EBX: 0x57983dec, ECX: 0x06fa2b80, EDX: 0x07fb9c80
CR2: 0x00000000, EBP: 0x57983e18, ESI: 0x07fb9f00, EDI: 0x00000001
EFL: 0x00010206, EIP: 0x00000000, CS: 0x00000008, DS: 0x00000010
Error code: 0x00000010
Backtrace (CPU 0), Frame : Return Address (4 potential args on stack)
0x57983ae8 : 0x21acfa (0x5ce650 0x57983b1c 0x223156 0x0)
0x57983b38 : 0x2a6ac2 (0x590a50 0x0 0xe 0x590c1a)
0x57983c18 : 0x29c968 (0x57983c30 0x7fb9f00 0x57983e18 0x0)
0x57983c28 : 0x0 (0xe 0x48 0x57980010 0x7fb0010)
0x57983e18 : 0x5389f2 (0x7fb5a00 0x7f62500 0x1 0x4fbe2a)
0x57983e78 : 0x536c27 (0x7f62500 0x7fb5a00 0x8006380 0x805e4c0)
0x57983f28 : 0x5371b8 (0x7f62500 0x8000140 0x0 0xffffffff)
0x57983f78 : 0x538e67 (0x7f62500 0x0 0x57983fac 0x1)
0x57983fc8 : 0x29c68c (0x7f85190 0x0 0x29c69b 0x74d03d4)
BSD process name corresponding to current thread: kernel_task
Mac OS version:
10A432
Kernel version:
Darwin Kernel Version 10.0.0: Fri Jul 31 22:47:34 PDT 2009; root:xnu-1456.1.25~1/RELEASE_I386
System model name: MacBookPro7,1 (Mac-F222BEC8)
System uptime in nanoseconds: 109525048606
unloaded kexts:
(none)
loaded kexts:
com.apple.driver.AppleIntelYonahProfile 14
com.apple.driver.AppleIntelPenrynProfile 17
com.apple.DontSteal_Mac_OSX 7.0.0
com.apple.driver.AppleHDA 1.7.4a1
com.apple.driver.AppleGraphicsControl 2.8.16
com.apple.driver.AppleIntelNehalemProfile 11
com.apple.driver.AudioIPCDriver 1.1.0
com.apple.driver.AppleUpstreamUserClient 3.0.5
com.apple.driver.SMCMotionSensor 3.0.0d4
com.apple.driver.ACPISMCPlatformPlugin 3.4.0a20
com.apple.driver.AppleBacklight 170.0.2
com.apple.driver.AppleIRController 161
com.apple.driver.AppleIntelMeromProfile 19
com.apple.kext.AppleSMCLMU 1.4.5d1
com.apple.GeForce 6.0.0
com.apple.driver.DiskImages.SparseDiskImage 281
com.apple.driver.DiskImages.ReadWriteDiskImage 281
com.apple.driver.DiskImages.UDIFDiskImage 281
com.apple.driver.DiskImages.RAMBackingStore 281
com.apple.driver.DiskImages.HTTPBackingStore 281
com.apple.driver.DiskImages.FileBackingStore 281
com.apple.driver.AppleUSBTCButtons 1.8.0b4
com.apple.driver.AppleUSBTCKeyEventDriver 1.8.0b4
com.apple.driver.AppleUSBTCKeyboard 1.8.0b4
com.apple.driver.AppleUSBCardReader 2.5.0
com.apple.iokit.SCSITaskUserClient 2.5.0
com.apple.iokit.IOAHCIBlockStorage 1.5.0
com.apple.driver.AirPortBrcm43xx 410.91.20
com.apple.driver.AppleFWOHCI 4.3.4
com.apple.driver.AppleUSBHub 3.7.8
com.apple.driver.AppleAHCIPort 2.0.0
com.apple.driver.AppleUSBEHCI 3.7.5
com.apple.driver.AppleUSBOHCI 3.7.5
com.apple.BootCache 31
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.driver.AppleEFINVRAM 1.3.0
com.apple.driver.AppleRTC 1.3
com.apple.driver.AppleHPET 1.4
com.apple.driver.AppleSmartBatteryManager 160.0.0
com.apple.driver.AppleACPIButtons 1.3
com.apple.driver.AppleSMBIOS 1.4
com.apple.driver.AppleACPIEC 1.3
com.apple.driver.AppleAPIC 1.4
com.apple.driver.AppleIntelCPUPowerManagementClient 90.0.0
com.apple.security.sandbox 0
com.apple.security.quarantine 0
com.apple.nke.applicationfirewall 2.0.11
com.apple.driver.AppleIntelCPUPowerManagement 90.0.0
com.apple.driver.AppleHDAPlatformDriver 1.7.4a1 - last loaded 109517592692
com.apple.iokit.IOBluetoothSerialManager 2.2f18
com.apple.iokit.IOSerialFamily 10.0.2
com.apple.driver.AppleHDAHardwareConfigDriver 1.7.4a1
com.apple.driver.DspFuncLib 1.7.4a1
com.apple.iokit.IOAudioFamily 1.7.0fc16
com.apple.kext.OSvKernDSPLib 1.3
com.apple.driver.AppleHDAController 1.7.4a1
com.apple.iokit.IOHDAFamily 1.7.4a1
com.apple.driver.IOPlatformPluginFamily 3.4.0a20
com.apple.iokit.AppleProfileFamily 40
com.apple.iokit.IOFireWireIP 2.0.3
com.apple.driver.AppleSMC 3.0.1d2
com.apple.NVDAResman 6.0.0
com.apple.iokit.IONDRVSupport 2.0
com.apple.iokit.IOGraphicsFamily 2.0
com.apple.driver.DiskImages.KernelBacked 281
com.apple.driver.AppleUSBMultitouch 200.20
com.apple.iokit.IOUSBHIDDriver 3.7.5
com.apple.driver.BroadcomUSBBluetoothHCIController 2.2f18
com.apple.driver.AppleUSBBluetoothHCIController 2.2f18
com.apple.iokit.IOBluetoothFamily 2.2f18
com.apple.iokit.IOUSBMassStorageClass 2.5.0
com.apple.iokit.IOSCSIBlockCommandsDevice 2.5.0
com.apple.driver.AppleUSBMergeNub 3.7.5
com.apple.driver.AppleUSBComposite 3.7.5
com.apple.iokit.IOSCSIMultimediaCommandsDevice 2.5.0
com.apple.iokit.IOBDStorageFamily 1.6
com.apple.iokit.IODVDStorageFamily 1.6
com.apple.iokit.IOCDStorageFamily 1.6
com.apple.driver.XsanFilter 402.1
com.apple.iokit.IOAHCISerialATAPI 1.2.0
com.apple.iokit.IOSCSIArchitectureModelFamily 2.5.0
com.apple.iokit.IO80211Family 300.20
com.apple.iokit.IOFireWireFamily 4.1.7
com.apple.iokit.IOUSBUserClient 3.7.5
com.apple.iokit.IOAHCIFamily 2.0.0
com.apple.iokit.IOUSBFamily 3.7.8
com.apple.iokit.IONetworkingFamily 1.8
com.apple.driver.AppleFileSystemDriver 2.0
com.apple.driver.AppleEFIRuntime 1.3.0
com.apple.iokit.IOHIDFamily 1.6.0
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.TMSafetyNet 6
com.apple.kext.AppleMatch 1.0.0d1
com.apple.driver.DiskImages 281
com.apple.iokit.IOStorageFamily 1.6
com.apple.driver.AppleACPIPlatform 1.3
com.apple.iokit.IOPCIFamily 2.6
com.apple.iokit.IOACPIFamily 1.3.0

PowerBook G4 12" kernel panic on reboot.

Hello all.
I've recently obtained a PowerBook G4 12" (1.33 GHz) and I've installed Tiger on it.
I noticed it kernel panics on reboot and not a shutdown THEN reboot. (or in technical terms, a "cold book.")
I've also tried installing Leopard on it, but it runs very slugishly, but here's the catch: It doesn't kernel panics on reboot.
Another thing is that the kernel panic is linked to the AirPort Extreme Card. I repaired permissions and ran AHT, no problems found.
Could anybody help me figure this out?

Can you post some of your crash logs? Might be a clue. See Mac OS X: How to log a kernel panic http://support.apple.com/kb/HT2546
Understanding crash logs isn’t easy and it’s hard (sometimes impossible) to decipher the cause of the problem. Take a look at Apple’s Crash Reporter document at http://developer.apple.com/technotes/tn2004/tn2123.html Also look at Tutorial: An introduction to reading Mac OS X crash reports
http://www.macfixit.com/article.php?story=20060309075929717
Kernel panics are usually caused by a hardware problem – frequently RAM, a USB device or a Firewire device. What external devices do you have connected? When trying to troubleshoot problems, disconnect all external devices. Do you experience the same problems?
To eliminate RAM being the problem, Look at this link: Testing RAM @ http://guides.macrumors.com/Testing_RAM Then download & use Memtest & Ramber.
Do you have an Apple Hardware Test disc (the AHT is on the Install/Restore DVD that came with your Mac)? Running the Apple Hardware Test in Loop Mode is an excellent troubleshooting step for finding intermittent hardware problems. It is especially useful when troubleshooting intermittent kernel panics. If Loop Mode is supported by the version of the Apple Hardware Test you are using, you run the Extended Test in Loop Mode by pressing Control-L before starting the test. Looping On should appear in the right window. Then click the Extended Test button.The test will run continuously until a problem is found. If a problem is found, the test will cease to loop, indicating the problem it found. If the test fails, be sure to write down the exact message associated with the failure.In some cases, RAM problems did not show up until nearly 40 loops, so give it a good run.
May be a solution on one of these links.
http://docs.info.apple.com/article.html?artnum=106227 What's a "kernel panic"? (Mac OS X)
http://www.macmaps.com/kernelpanic.html Mac OS X Kernel Panic FAQ
http://www.index-site.com/kernelpanic.html Mac OS X Kernel Panic FAQ
http://www.thexlab.com/faqs/kernelpanics.html Resolving Kernel Panics
http://www.macfixit.com/article.php?story=20060911080447777 Avoiding and eliminating Kernel panics
http://macosg.com/group/viewtopic.php?t=800 12-Step Program to Isolate Freezes and/or Kernel Panics
 Cheers, Tom

Kernel Panic when I try to install OSX 10.3. Can anyone help?

I bought this iMac recently. It has OS 10.2.? installed and OS 9.1. When I try to install OS 10.3 I get a Kernel Panic when it reboots to start the installation. I ran the Norton Disk Doctor it had over in OS9 -- said it fixed some things and now ok but I still get a Kernel Panic trying to install Panther. I just want to re-format the whole computer with 10.3 and get rid of 9. How can I do that?
Thanks.

KeepItSimple:
If you're getting a kernel panic when trying to install, then I'd start with RAM and the installation disks.
RAM: Panther has higher standards for RAM than does 10.2.x; if you have more than one RAM module, take one out (assuming that leaves you with at least 128 MB) and try again. If it panics again, try switching the RAM. As far a brand names go, I prefere Kingston or Azen RAM.
Installation Disks: if they're grey, they won't work. Grey installation disks are packaged with specific Macs, and only contain hardware drivers for that specific Mac. You need the retail version of the disks, which were sold in a black box. There are four CDs in the set, three of which are for installing the OS (the fourth contains Developer Tools). The three OS disks are black with a large silver X in the middle.
Good luck!
Andrew

Kernel Panic when I use hot corner to put display to sleep (twice)

As the title above says, for the second night in a row, my new iMac (2012) has had a kernel panic when I perform that action. I also turn off my magic mouse to save the batteries but I'm constantly doing both of these actions throughout the day when I know I'm not going to being using my iMac for some time. Both occurences happened on consecutive nights. Any help would be greatly appreciated
Interval Since Last Panic Report: 50222 sec
Panics Since Last Report:          1
Anonymous UUID:                    -
Tue Feb 26 04:19:38 2013
panic(cpu 1 caller 0xffffff800b8156b0): "Spinlock acquisition timed out: lock=0xffffff8034706638, lock owner thread=0xffffff8021d16000, current_thread: 0xffffff8021d16000, lock owner active on CPU 0x1, current owner: 0xffffff8021d16000"@/SourceCache/xnu/xnu-2050.20.9/osfmk/i386/locks_i386.c:363
Backtrace (CPU 1), Frame : Return Address
0xffffff80fd0bbce0 : 0xffffff800b81d626
0xffffff80fd0bbd50 : 0xffffff800b8156b0
0xffffff80fd0bbd70 : 0xffffff800b820b80
0xffffff80fd0bbda0 : 0xffffff800b810448
0xffffff80fd0bbdf0 : 0xffffff800b820df2
0xffffff80fd0bbe20 : 0xffffff800b84f0a1
0xffffff80fd0bbe60 : 0xffffff800b816d00
0xffffff80fd0bbeb0 : 0xffffff800b819f64
0xffffff80fd0bbee0 : 0xffffff800b818c97
0xffffff80fd0bbf00 : 0xffffff800b8a5c5e
0xffffff80fd0bbfb0 : 0xffffff800b8cd9ce
BSD process name corresponding to current thread: USB Print and St
Mac OS version:
12C3103
Kernel version:
Darwin Kernel Version 12.2.1: Thu Oct 18 12:13:47 PDT 2012; root:xnu-2050.20.9~1/RELEASE_X86_64
Kernel UUID: 3F93B852-872F-3DF0-BCF8-46D48024C422
Kernel slide:     0x000000000b600000
Kernel text base: 0xffffff800b800000
System model name: iMac13,1 (Mac-00BE6ED71E35EB86)
System uptime in nanoseconds: 67275470613942
last loaded kext at 66457127051521: com.apple.driver.AppleProfileTimestampAction          97 (addr 0xffffff7f8dc46000, size 16384)
last unloaded kext at 34782554650228: com.apple.driver.AppleUSBCDC          4.1.22 (addr 0xffffff7f8dbe4000, size 12288)
loaded kexts:
com.silex.driver.sxuptp          1.5.1
com.Cycling74.driver.Soundflower          1.6.3
com.apple.driver.AppleIntelProfile          97
com.apple.filesystems.smbfs          1.8
com.apple.driver.AppleHWSensor          1.9.5d0
com.apple.driver.AppleBluetoothMultitouch          75.19
com.apple.filesystems.autofs          3.0
com.apple.iokit.IOBluetoothSerialManager          4.1.2f9
com.apple.driver.AppleMikeyHIDDriver          122
com.apple.driver.AGPM          100.12.81
com.apple.driver.ApplePlatformEnabler          2.0.6d1
com.apple.driver.X86PlatformShim          1.0.0
com.apple.driver.AppleHDA          2.3.5fc12
com.apple.driver.AppleMikeyDriver          2.3.5fc12
com.apple.driver.AppleSMCLMU          2.0.3d0
com.apple.driver.AudioAUUC          1.60
com.apple.iokit.IOUserEthernet          1.0.0d1
com.apple.iokit.BroadcomBluetoothHCIControllerUSBTransport          4.1.2f9
com.apple.GeForce          8.0.6
com.apple.driver.AppleIntelHD4000Graphics          8.0.6
com.apple.Dont_Steal_Mac_OS_X          7.0.0
com.apple.driver.ApplePolicyControl          3.2.13
com.apple.driver.AppleUpstreamUserClient          3.5.10
com.apple.driver.AppleIntelFramebufferCapri          8.0.6
com.apple.driver.AppleLPC          1.6.0
com.apple.driver.AppleMCCSControl          1.1.11
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless          1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib          1.0.0d1
com.apple.BootCache          34
com.apple.driver.XsanFilter          404
com.apple.iokit.IOAHCIBlockStorage          2.3.1
com.apple.driver.AppleSDXC          1.4.0
com.apple.driver.AppleAHCIPort          2.5.1
com.apple.driver.AppleUSBHub          5.5.0
com.apple.iokit.AppleBCM5701Ethernet          3.5.0b9
com.apple.driver.AirPort.Brcm4331          612.20.15
com.apple.driver.AppleUSBEHCI          5.5.0
com.apple.driver.AppleUSBXHCI          1.5.1
com.apple.driver.AppleEFINVRAM          1.7
com.apple.driver.AppleACPIButtons          1.7
com.apple.driver.AppleRTC          1.5
com.apple.driver.AppleHPET          1.8
com.apple.driver.AppleSMBIOS          1.9
com.apple.driver.AppleACPIEC          1.7
com.apple.driver.AppleAPIC          1.6
com.apple.driver.AppleIntelCPUPowerManagementClient          196.0.0
com.apple.nke.applicationfirewall          4.0.39
com.apple.security.quarantine          2
com.apple.driver.AppleIntelCPUPowerManagement          196.0.0
com.apple.driver.AppleProfileTimestampAction          97
com.apple.driver.AppleProfileThreadInfoAction          97
com.apple.driver.AppleProfileRegisterStateAction          97
com.apple.driver.AppleProfileReadCounterAction          97
com.apple.driver.AppleProfileKEventAction          97
com.apple.driver.AppleProfileCallstackAction          97
com.apple.iokit.AppleProfileFamily          97
com.apple.driver.IOBluetoothHIDDriver          4.1.2f9
com.apple.driver.AppleMultitouchDriver          235.29
com.apple.kext.triggers          1.0
com.apple.iokit.IOSerialFamily          10.0.6
com.apple.driver.DspFuncLib          2.3.5fc12
com.apple.nvidia.nvGK100hal          8.0.6
com.apple.iokit.IOAudioFamily          1.8.9fc11
com.apple.kext.OSvKernDSPLib          1.6
com.apple.iokit.IOSurface          86.0.3
com.apple.iokit.AppleBluetoothHCIControllerUSBTransport          4.1.2f9
com.apple.driver.X86PlatformPlugin          1.0.0
com.apple.driver.AppleThunderboltEDMSink          1.1.8
com.apple.driver.AppleThunderboltEDMSource          1.1.8
com.apple.iokit.IOBluetoothFamily          4.1.2f9
com.apple.driver.AppleSMC          3.1.4d2
com.apple.driver.AppleSMBusPCI          1.0.11d0
com.apple.driver.AppleGraphicsControl          3.2.13
com.apple.NVDAResman          8.0.6
com.apple.driver.IOPlatformPluginFamily          5.3.0d47
com.apple.driver.AppleSMBusController          1.0.11d0
com.apple.driver.AppleHDAController          2.3.5fc12
com.apple.iokit.IOHDAFamily          2.3.5fc12
com.apple.iokit.IONDRVSupport          2.3.6
com.apple.iokit.IOGraphicsFamily          2.3.6
com.apple.iokit.IOSCSIBlockCommandsDevice          3.5.5
com.apple.iokit.IOUSBMassStorageClass          3.5.1
com.apple.iokit.IOSCSIArchitectureModelFamily          3.5.5
com.apple.driver.AppleUSBHIDKeyboard          170.2
com.apple.driver.AppleHIDKeyboard          170.2
com.apple.iokit.IOUSBHIDDriver          5.2.5
com.apple.driver.AppleThunderboltDPOutAdapter          1.8.9
com.apple.driver.AppleThunderboltDPInAdapter          1.8.9
com.apple.driver.AppleThunderboltDPAdapterFamily          1.8.9
com.apple.driver.AppleThunderboltPCIDownAdapter          1.2.6
com.apple.driver.AppleUSBMergeNub          5.5.0
com.apple.driver.AppleUSBComposite          5.2.5
com.apple.driver.AppleThunderboltNHI          1.6.3
com.apple.iokit.IOThunderboltFamily          2.1.8
com.apple.iokit.IOAHCIFamily          2.3.1
com.apple.iokit.IOEthernetAVBController          1.0.2b1
com.apple.iokit.IOUSBUserClient          5.5.0
com.apple.iokit.IO80211Family          510.4
com.apple.iokit.IONetworkingFamily          3.0
com.apple.iokit.IOUSBFamily          5.5.0
com.apple.driver.AppleEFIRuntime          1.7
com.apple.iokit.IOHIDFamily          1.8.1
com.apple.iokit.IOSMBusFamily          1.1
com.apple.security.sandbox          220
com.apple.kext.AppleMatch          1.0.0d1
com.apple.security.TMSafetyNet          7
com.apple.driver.DiskImages          344
com.apple.iokit.IOStorageFamily          1.8
com.apple.driver.AppleKeyStore          28.21
com.apple.driver.AppleACPIPlatform          1.7
com.apple.iokit.IOPCIFamily          2.7.3
com.apple.iokit.IOACPIFamily          1.4
com.apple.kec.corecrypto          1.0
Model: iMac13,1, BootROM IM131.010A.B05, 4 processors, Intel Core i5, 2.7 GHz, 8 GB, SMC 2.9f5
Graphics: NVIDIA GeForce GT 640M, NVIDIA GeForce GT 640M, PCIe, 512 MB
Memory Module: BANK 0/DIMM0, 4 GB, DDR3, 1600 MHz, 0x02FE, 0x45424A3431554638424455352D474E2D4620
Memory Module: BANK 1/DIMM0, 4 GB, DDR3, 1600 MHz, 0x02FE, 0x45424A3431554638424455352D474E2D4620
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0xF4), Broadcom BCM43xx 1.0 (5.106.98.100.15)
Bluetooth: Version 4.1.2f9 11046, 2 service, 18 devices, 1 incoming serial ports
Network Service: Ethernet, Ethernet, en0
Network Service: Wi-Fi, AirPort, en1
Serial ATA Device: APPLE HDD HTS541010A9E662, 1 TB
USB Device: External USB 3.0, 0x0480 (Toshiba America Info. Systems, Inc.), 0xd010, 0x14a00000 / 2
USB Device: hub_device, 0x8087 (Intel Corporation), 0x0024, 0x1d100000 / 2
USB Device: Keyboard Hub, apple_vendor_id, 0x1006, 0x1d110000 / 8
USB Device: iPod, apple_vendor_id, 0x129e, 0x1d113000 / 10
USB Device: Apple Keyboard, apple_vendor_id, 0x024f, 0x1d112000 / 9
USB Device: hub_device, 0x0424 (SMSC), 0x2412, 0x1d180000 / 3
USB Device: BRCM20702 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0x1d181000 / 4
USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x828b, 0x1d181300 / 5
USB Device: hub_device, 0x8087 (Intel Corporation), 0x0024, 0x1a100000 / 2
USB Device: Desktop, 0x0bc2 (Seagate LLC), 0x3300, 0x1a130000 / 4
USB Device: FaceTime HD Camera (Built-in), apple_vendor_id, 0x8511, 0x1a110000 / 3

Any or all of the following third-party system modifications may be contributing to your problem:
SX-Virtual Link
Soundflower
If the panic is recurrent, I suggest you uninstall them, one at a time, according to the developers' instructions, to see whether you can identify which one is at fault. A conflict between modifications may be involved. Reboot and test after each uninstallation.
Back up all data before making any changes.

Can't sync Centro (AT&T) with Outlook 2003 - on non main user account

Hi
I have a Centro (AT&T) and Outlook 2003, Vista Home
Our main user account ("L*******) can install the Palm Desktop software from a CD (that came with the Centro in May 2008) and from PalmDesktopWin62.exe (72MB).
It ask for a user name of which I give it "K****" (letters removed on purpose). It ask me to connect the Centro and shows that it is using Outlook. An Outlook email account is NOT set up on this user account on the laptop. When I go to the HotSync Manager, it shows under Applications ~ Outlook, etc.
On user account (K*****) on same laptop, when I try to sync above phone, it asked to set up another account "K****" on this PC to which I reply Yes. Then when it starts the HotSync it is using Palm Desktop as it has under applications ~ Date Book, Address Book,To Do List, Memo Pad instead of the Outlook name of Calendar, Contacts, Tasks, Memos.
I have done many hard resets on the Centro. I have uninstalled and reinstalled the software from the CD & download several times also removing all the Palm OS files under all the user accounts on the laptop.
I've tried installing both methods of software under the main account (L****) and the secondary account (K****) both as adminstrators.
So my question: what am I doing wrong or can you only run an outlook sync from the primary account on a laptop?
Also, I'm currently running all of the above on another computer but only using the primary account and not having problems.
Thanks so much for your time!!!
Post relates to: Centro (AT&T)

Ok it sounds like that you have a username setup on the device. Now to get this synced with outlook we need to delete the current account setup on the PC in Palm Desktop. First we need to setup a username called test. Once that is setup then delete the other account and then sync the device. Once the device is done syncing go to Start-->Programs-->Palm-->PIM conduit sync--> sync with outlook. Click ok then done. Then sync again.
To delete and add an account in the hotsync manager, open up the hotsync manger and select user accounts. Once in there click on add and type in test. Then click ok. Select the other username that looks like yours and delete it.

Kernel Panic when launching safari OS X mavericks

Hello, i would really appreciate your input guys. Sometimes I am getting kernel panics when i launch safari, this occurs mostly when i turn mac on and then launch the safari, when i launch something else it wont happen. I already tried verifying disk and I also clean installed Mavericks. Any advice is welcome. Thanks!
Here`s the log:
Anonymous UUID:       CB452275-9E8D-97A4-A782-209B3FC6FA76
Fri Jun 13 09:59:33 2014
panic(cpu 0 caller 0xffffff7f9e19af7c): "GPU Panic: [<None>] 5 3 7f 0 0 0 0 3 : NVRM[0/1:0:0]: Read Error 0x00070000: CFG 0xffffffff 0xffffffff 0xffffffff, BAR0 0xd2000000 0xffffff8137ecc000 0x0a5480a2, D0, P3/4\n"@/SourceCache/AppleGraphicsControl/AppleGraphicsControl-3.5.26/src/Apple MuxControl/kext/GPUPanic.cpp:127
Backtrace (CPU 0), Frame : Return Address
0xffffff8126ea2580 : 0xffffff801be22fa9
0xffffff8126ea2600 : 0xffffff7f9e19af7c
0xffffff8126ea26d0 : 0xffffff7f9c825e7b
0xffffff8126ea2790 : 0xffffff7f9c8ef46a
0xffffff8126ea27d0 : 0xffffff7f9ca70b2e
0xffffff8126ea2820 : 0xffffff7f9cae26e0
0xffffff8126ea2aa0 : 0xffffff7f9cae0fa9
0xffffff8126ea2c40 : 0xffffff7f9c8ca4ef
0xffffff8126ea2cd0 : 0xffffff7f9c7fbf8e
0xffffff8126ea2e00 : 0xffffff7f9c801e3a
0xffffff8126ea2ec0 : 0xffffff7f9c82a937
0xffffff8126ea30c0 : 0xffffff7f9c82c443
0xffffff8126ea31b0 : 0xffffff7f9d7d2747
0xffffff8126ea3240 : 0xffffff7f9d7d297b
0xffffff8126ea3260 : 0xffffff7f9d7cfb77
0xffffff8126ea34a0 : 0xffffff7f9d7c9358
0xffffff8126ea3610 : 0xffffff7f9d7c8d26
0xffffff8126ea3640 : 0xffffff7f9d7caedc
0xffffff8126ea3680 : 0xffffff7f9d7ca854
0xffffff8126ea3700 : 0xffffff7f9d7ca59c
0xffffff8126ea3780 : 0xffffff7f9d7b2ae0
0xffffff8126ea37e0 : 0xffffff7f9d7b33da
0xffffff8126ea3830 : 0xffffff7f9d7b3807
0xffffff8126ea38a0 : 0xffffff7f9d7b3fc8
0xffffff8126ea38e0 : 0xffffff7f9d780fea
0xffffff8126ea3a60 : 0xffffff7f9d7b0940
0xffffff8126ea3b20 : 0xffffff7f9d77fad9
0xffffff8126ea3b70 : 0xffffff801c2cea56
0xffffff8126ea3b90 : 0xffffff801c2d0051
0xffffff8126ea3bf0 : 0xffffff801c2cdabf
0xffffff8126ea3d40 : 0xffffff801beb66a8
0xffffff8126ea3e50 : 0xffffff801be26bf1
0xffffff8126ea3e80 : 0xffffff801be139f5
0xffffff8126ea3ef0 : 0xffffff801be1e043
0xffffff8126ea3f70 : 0xffffff801bec989d
0xffffff8126ea3fb0 : 0xffffff801bef3c76
      Kernel Extensions in backtrace:
         com.apple.driver.AppleMuxControl(3.5.26)[B67CD59F-1344-37BC-8A9A-46D6D3DCA13D]@ 0xffffff7f9e18c000->0xffffff7f9e19ffff
            dependency: com.apple.driver.AppleGraphicsControl(3.5.26)[C0F9A79F-167E-3A68-873C-5CE17B97F B11]@0xffffff7f9e184000
            dependency: com.apple.iokit.IOACPIFamily(1.4)[045D5D6F-AD1E-36DB-A249-A346E2B48E54]@0xfffff f7f9c72b000
            dependency: com.apple.iokit.IOPCIFamily(2.9)[244D4E48-78E6-3369-8D76-285C66EF9BF4]@0xffffff 7f9c4be000
            dependency: com.apple.iokit.IOGraphicsFamily(2.4.1)[B889D3AB-CCC0-3FCD-A83E-D2E3E4CB537B]@0 xffffff7f9c783000
            dependency: com.apple.driver.AppleBacklightExpert(1.0.4)[E04639C5-D734-3AB3-A682-FE66694C66 53]@0xffffff7f9e187000
         com.apple.nvidia.classic.NVDAResmanTesla(8.2.4)[6EB3FF52-A4F6-3496-AE9C-D89B00F DE504]@0xffffff7f9c7d6000->0xffffff7f9ca3efff
            dependency: com.apple.iokit.IOPCIFamily(2.9)[244D4E48-78E6-3369-8D76-285C66EF9BF4]@0xffffff 7f9c4be000
            dependency: com.apple.iokit.IONDRVSupport(2.4.1)[B93BBFC9-9ED5-3DDD-8CED-5EDA081BB997]@0xff ffff7f9c7c6000
            dependency: com.apple.iokit.IOGraphicsFamily(2.4.1)[B889D3AB-CCC0-3FCD-A83E-D2E3E4CB537B]@0 xffffff7f9c783000
         com.apple.nvidia.classic.NVDANV50HalTesla(8.2.4)[B0E6AAA7-E970-3D81-8B43-145D56 A3A4AC]@0xffffff7f9ca49000->0xffffff7f9ccf2fff
            dependency: com.apple.nvidia.classic.NVDAResmanTesla(8.2.4)[6EB3FF52-A4F6-3496-AE9C-D89B00F DE504]@0xffffff7f9c7d6000
            dependency: com.apple.iokit.IOPCIFamily(2.9)[244D4E48-78E6-3369-8D76-285C66EF9BF4]@0xffffff 7f9c4be000
         com.apple.GeForceTesla(8.2.4)[24ED915E-02F3-3A31-8502-6AA41FFCA420]@0xffffff7f9 d76e000->0xffffff7f9d838fff
            dependency: com.apple.iokit.IOPCIFamily(2.9)[244D4E48-78E6-3369-8D76-285C66EF9BF4]@0xffffff 7f9c4be000
            dependency: com.apple.iokit.IONDRVSupport(2.4.1)[B93BBFC9-9ED5-3DDD-8CED-5EDA081BB997]@0xff ffff7f9c7c6000
            dependency: com.apple.iokit.IOGraphicsFamily(2.4.1)[B889D3AB-CCC0-3FCD-A83E-D2E3E4CB537B]@0 xffffff7f9c783000
            dependency: com.apple.nvidia.classic.NVDAResmanTesla(8.2.4)[6EB3FF52-A4F6-3496-AE9C-D89B00F DE504]@0xffffff7f9c7d6000
BSD process name corresponding to current thread: com.apple.WebKit
Mac OS version:
13D65
Kernel version:
Darwin Kernel Version 13.2.0: Thu Apr 17 23:03:13 PDT 2014; root:xnu-2422.100.13~1/RELEASE_X86_64
Kernel UUID: ADD73AE6-88B0-32FB-A8BB-4F7C8BE4092E
Kernel slide:     0x000000001bc00000
Kernel text base: 0xffffff801be00000
System model name: MacBookPro6,2 (Mac-F22586C8)
System uptime in nanoseconds: 109308043883
last loaded kext at 6217964049: com.apple.driver.AppleHWSensor          1.9.5d0 (addr 0xffffff7f9ded7000, size 36864)
loaded kexts:
com.apple.driver.AppleHWSensor          1.9.5d0
com.apple.driver.AudioAUUC          1.60
com.apple.filesystems.autofs          3.0
com.apple.iokit.IOBluetoothSerialManager          4.2.4f1
com.apple.driver.AppleTyMCEDriver          1.0.2d2
com.apple.driver.AGPM          100.14.15
com.apple.driver.AppleMikeyHIDDriver          124
com.apple.driver.AppleMikeyDriver          2.6.1f2
com.apple.driver.AppleHDAHardwareConfigDriver          2.6.1f2
com.apple.driver.AppleUpstreamUserClient          3.5.13
com.apple.driver.AppleHDA          2.6.1f2
com.apple.iokit.IOUserEthernet          1.0.0d1
com.apple.driver.AppleIntelHDGraphics          8.2.4
com.apple.Dont_Steal_Mac_OS_X          7.0.0
com.apple.driver.AppleHWAccess          1
com.apple.GeForceTesla          8.2.4
com.apple.driver.AppleBacklight          170.3.5
com.apple.driver.AppleSMCLMU          2.0.4d1
com.apple.driver.AppleMuxControl          3.5.26
com.apple.driver.ACPI_SMC_PlatformPlugin          1.0.0
com.apple.driver.AppleIntelMCEReporter          104
com.apple.driver.AppleIntelHDGraphicsFB          8.2.4
com.apple.driver.AppleMCCSControl          1.1.12
com.apple.nvidia.NVDAStartup          8.2.6
com.apple.iokit.IOBluetoothUSBDFU          4.2.4f1
com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport          4.2.4f1
com.apple.driver.AppleSMCPDRC          1.0.0
com.apple.driver.AppleLPC          1.7.0
com.apple.driver.SMCMotionSensor          3.0.4d1
com.apple.driver.AppleUSBTCButtons          240.2
com.apple.iokit.SCSITaskUserClient          3.6.6
com.apple.driver.AppleUSBCardReader          3.4.1
com.apple.driver.AppleIRController          325.7
com.apple.driver.AppleUSBTCKeyEventDriver          240.2
com.apple.driver.AppleUSBTCKeyboard          240.2
com.apple.driver.AppleFileSystemDriver          3.0.1
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless          1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib          1.0.0d1
com.apple.BootCache          35
com.apple.driver.XsanFilter          404
com.apple.driver.AppleUSBHub          666.4.0
com.apple.iokit.IOAHCIBlockStorage          2.5.1
com.apple.driver.AirPort.Brcm4331          700.20.22
com.apple.iokit.AppleBCM5701Ethernet          3.8.1b2
com.apple.driver.AppleFWOHCI          5.0.2
com.apple.driver.AppleAHCIPort          3.0.0
com.apple.driver.AppleUSBEHCI          660.4.0
com.apple.driver.AppleUSBUHCI          656.4.1
com.apple.driver.AppleSmartBatteryManager          161.0.0
com.apple.driver.AppleACPIButtons          2.0
com.apple.driver.AppleRTC          2.0
com.apple.driver.AppleHPET          1.8
com.apple.driver.AppleSMBIOS          2.1
com.apple.driver.AppleACPIEC          2.0
com.apple.driver.AppleAPIC          1.7
com.apple.driver.AppleIntelCPUPowerManagementClient          217.92.1
com.apple.nke.applicationfirewall          153
com.apple.security.quarantine          3
com.apple.driver.AppleIntelCPUPowerManagement          217.92.1
com.apple.kext.triggers          1.0
com.apple.iokit.IOSerialFamily          10.0.7
com.apple.AppleGraphicsDeviceControl          3.5.26
com.apple.driver.DspFuncLib          2.6.1f2
com.apple.vecLib.kext          1.0.0
com.apple.iokit.IOAudioFamily          1.9.7fc2
com.apple.kext.OSvKernDSPLib          1.14
com.apple.iokit.IOSurface          91.1
com.apple.iokit.IOBluetoothFamily          4.2.4f1
com.apple.nvidia.classic.NVDANV50HalTesla          8.2.4
com.apple.nvidia.classic.NVDAResmanTesla          8.2.4
com.apple.driver.AppleBacklightExpert          1.0.4
com.apple.driver.AppleGraphicsControl          3.5.26
com.apple.driver.AppleSMBusPCI          1.0.12d1
com.apple.driver.IOPlatformPluginLegacy          1.0.0
com.apple.driver.AppleSMBusController          1.0.11d1
com.apple.driver.AppleHDAController          2.6.1f2
com.apple.iokit.IOHDAFamily          2.6.1f2
com.apple.iokit.IONDRVSupport          2.4.1
com.apple.iokit.IOGraphicsFamily          2.4.1
com.apple.iokit.IOBluetoothHostControllerUSBTransport          4.2.4f1
com.apple.iokit.IOFireWireIP          2.2.6
com.apple.driver.IOPlatformPluginFamily          5.7.0d11
com.apple.driver.AppleSMC          3.1.8
com.apple.iokit.IOSCSIBlockCommandsDevice          3.6.6
com.apple.iokit.IOUSBMassStorageClass          3.6.0
com.apple.iokit.IOSCSIArchitectureModelFamily          3.6.6
com.apple.driver.AppleUSBMultitouch          240.9
com.apple.iokit.IOUSBHIDDriver          660.4.0
com.apple.driver.AppleUSBMergeNub          650.4.0
com.apple.driver.AppleUSBComposite          656.4.1
com.apple.iokit.IOUSBUserClient          660.4.2
com.apple.iokit.IO80211Family          630.35
com.apple.iokit.IOEthernetAVBController          1.0.3b4
com.apple.driver.mDNSOffloadUserClient          1.0.1b5
com.apple.iokit.IONetworkingFamily          3.2
com.apple.iokit.IOFireWireFamily          4.5.5
com.apple.iokit.IOAHCIFamily          2.6.5
com.apple.iokit.IOUSBFamily          677.4.0
com.apple.driver.AppleEFINVRAM          2.0
com.apple.driver.AppleEFIRuntime          2.0
com.apple.iokit.IOHIDFamily          2.0.0
com.apple.iokit.IOSMBusFamily          1.1
com.apple.security.sandbox          278.11
com.apple.kext.AppleMatch          1.0.0d1
com.apple.security.TMSafetyNet          7
com.apple.driver.AppleKeyStore          2
com.apple.driver.DiskImages          371.1
com.apple.iokit.IOStorageFamily          1.9
com.apple.iokit.IOReportFamily          23
com.apple.driver.AppleFDEKeyStore          28.30
com.apple.driver.AppleACPIPlatform          2.0
com.apple.iokit.IOPCIFamily          2.9
com.apple.iokit.IOACPIFamily          1.4
com.apple.kec.corecrypto          1.0
com.apple.kec.pthread          1
Model: MacBookPro6,2, BootROM MBP61.0057.B0F, 2 processors, Intel Core i5, 2.53 GHz, 8 GB, SMC 1.58f17
Graphics: Intel HD Graphics, Intel HD Graphics, Built-In, 288 MB
Graphics: NVIDIA GeForce GT 330M, NVIDIA GeForce GT 330M, PCIe, 256 MB
Memory Module: BANK 0/DIMM0, 4 GB, DDR3, 1067 MHz, 0x830B, 0x4E54344743363442384847304E532D434720
Memory Module: BANK 1/DIMM0, 4 GB, DDR3, 1067 MHz, 0x830B, 0x4E54344743363442384847304E532D434720
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x93), Broadcom BCM43xx 1.0 (5.106.98.100.22)
Bluetooth: Version 4.2.4f1 13674, 3 services, 15 devices, 1 incoming serial ports
Network Service: Ethernet, Ethernet, en0
Serial ATA Device: WDC WD5000LPVX-08V0TT5, 500,11 GB
Serial ATA Device: ADATA SX900, 256,06 GB
USB Device: Hub
USB Device: BRCM2070 Hub
USB Device: Bluetooth USB Host Controller
USB Device: Internal Memory Card Reader
USB Device: Apple Internal Keyboard / Trackpad
USB Device: Hub
USB Device: IR Receiver
USB Device: Built-in iSight
Thunderbolt Bus:

You probably have the problem described at http://support.apple.com/kb/ts4088
gfxCardStatus by cody krieger may help by allowing you to keep the graphics set to one of the two modes
In any case : take it to Apple or an AASP & show them the report They should run a specific test with a simple pass/fail result shown on screen.
The three year period since purchase has probably passed; but nonetheless, if you're asked to pay, I'd call Apple customer service (or speak to the store manager ) & request that they consider your case. Several users here have previously obtained free repairs after doing so, even though outside the time limit. Here's a fairly recent one,
and another

Can't add new Widgets to Dashboard on main user account

I recently switched to a new MacBook Air and after the initial intstallation used migration assistent to move my old data to the MacBook Air. All works fine except the Dashboard. With the old useraccount (which is my main account) I can't add new widgets to the dashboard. When I download and install a new widget I can see it in the /user/library/widgets section, I can see it in the widget list in the dashboard but when I click on it or drag it up to the dashboard it closes the dashboard again.
I tried adding a new user and in works fine in that new account.
Here's what I did to try and solve it sofar:
1. Repaired permissions
2. Deleted the two .plist's in user/library/preferences
3. Deleted the Cache in user/library/cache
4. Checked the folder permissions in /user/library/widget and compared that with the newuser/library/widget
5. Downloaded the 10.6.6. combo update and reinstalled
This behaviour is with every new widget I tried to install.
I tried to find similar behaviour using google but so far no luck. Any suggestions?

You have hosed preferences in the main user account. Create a new admin user account, log into it, backup the bad account's folder, delete the bad account, selecting the save data option, recreate the bad account using the same username/password combo, log out and back into the recreated original account. If the problem's solved, open the saved data dmg file in /Users/Deleted Users/, open the /Library/Preferences/ folder from the saved data, open the current /Users/restored account/Library/Preferences/ folder, and slowly copy plist files from the saved data folder to the current one that don't exist in it. Log out and back in to ensure there's no conflict and things still work correctly. Resolving conflicts or identifying corrupt plist files is a laborious process. Good luck.
See http://discussions.apple.com/thread.jspa?messageID=4703015 for more details on this process.

Leopard Kernel panic - when rebooted main user account is gone

Similar Messages

Maybe you are looking for