Leopard logic pro 8 3rd party plugins

Hey all,
are all 3rd Party Plugins working in Leopard??

All the ones I use are. Hope this helps!

Similar Messages

Will Lion work ok with Logic Pro and 3rd party plugins?

Will Lion OS work ok with Logic Pro and 3rd party plugins?
Any help would be much appreciated,
Regards James

Well, Sylenth I know... works under Logic Pro 9 and it should be found by left clicking and holding... the Software Insturment Button (The one just below where it says i/o and then scrolling down in the menu that appears to the Instrument section below the Apple Plugins...
I don't know about Massive 1.01 because i think that one is not Logic 9 compatible because it is so old.... and I have never used Vanguard... but according to it's specs the latest version should be found in the same place as Sylenth...
Both Sylenth and Vanguard are 32bit plugins...
...and.. it probably doesn't help that you are using older/not 'legal' copies of these plugins.... *ahem*

Leopard, ps cs3 and 3rd party plugins

help again please.
I have PS CS3 and numerous 3rd party plugins but as soon as I installed the new OS 10.5 I get the msg. one or more plugins are currently unavailable on your system. They worked before the upgrade of os10.5. I even upgraded to 10.5.1..The plugins I can't get are Nik color efex pro complete and Nik sharpener pro complete. The Nik website states they are compatible. Other 3rd party plugins like Fluid Mask 3, Genuine Fractals and Flaming Pear all work. Help if you can please. I already have a msg. to Nik software for help but have not gotten an answer from them..
Thank you.
sincerely
karen

To use your Nik Software products on a new Intel-based Mac Computer with Photoshop CS3, simply follow these three easy steps below:
1. Quit / Exit out of Adobe Photoshop CS3 and navigate to the Adobe Photoshop CS3 application file which is typically at the following location: Macintosh HD | Applications | Adobe Photoshop CS3
2. Highlight the Adobe Photoshop CS3 application file icon and press Command + I (+ I) to open File Info.
3. On the File Info window (as shown on the right), check the box next to "Open using Rosetta", then close the window.
That’s all there is to it. Photoshop and Nik Software filters will work without a problem.

Logic 8 and 3rd party plugins after upgrade

has anyone upgraded yet??????, whats the word on compatability on the 3rd party plugins
are they not going to work until they are updated again ???
has anyone tried or has anyone got the good word?
becasue mine will be here tomorrow
rock on

there are issues with multi-Output Instruments in the AU side; other than that so far so good .

Logic 64bit - slow 3rd party plugin adoption

One of the biggest and long awaited feature in the recent Logic upgrade was it's 64bit support. The breaking through the 4GM Memory barrier. No more holding back on the amount of memory hungry plugin channels. After a long struggle with the proper Intel adoption, Spectrasonics came back big time and is now the shining start in the 64bit plugin universe. VSL ditched their clumsy home-brewed UI solution last month and even Kontakt4 is on the 64bit team, although other plugins in their product line (Kore2) are still pending. Even a poor marketing stunt called "Komplete 7" is more of a money generating effort because all the product in that bundle are not "kompletely" up-to-date in the 64bit universe.
One big villain seems to be PACE, the maker of the iLok. They are holding all the developer hostage that rely on their iLok for copy protection. ITt is said that their copy protection scheme was cracked and now they have to fix it before releasing the 64bit verion. Their inability to get their "copy protection" act together is getting pathetic. While they are still looking for the unbreakable copy protection (note to PACE: "There is none!!!), they don't realize that they created a perfect "virtual" copy protection. A product that can't be released, can't be stolen. Problem solved.
Although EastWest claims that their 64bit AU version for Play is ready but waiting for PACE (another of their victim), I don't understand why IvoryII (finally announced today for a Sept 13 release) is still in development for the 64bit version. Wasn't that version announced for a spring 2010 release?
Why isn't there more pressure from plugin developers on PACE to get their act together and why don't plug-in developer feel the urge to speed up their 64bit development for the Mac?
I was waiting all those month to finally spend the money and buy Ivory II and now it is out but still in 32bit. But due to my own rule, I'm not buying any product that isn't released in native 64bit AU version and that includes Ivory II. Maybe for us Logic users, two things could speed things up a bit:
1) Let the developer hear our opinion about the need of full 64bit AU support
2) Get an Apple engineer over to PACE and help them get their sh... together.

Justin, it seem that you have more knowledge regarding the under the hood stuff than I do and I appreciate your clarification.
However there are two things that I still can't understand:
1) Spectrasonics, VSL, Kontakt all that works amazingly good already in 64bit AU considering the amount of time they had with such a major shift. Even EastWest claims that they are ready but waiting for the PACE guys. I don't argue with you that it is a simple task but those examples show that it is possible and I think those developers have the same careful considerations in mind that you explained. That leads to the next point:
2) Hesitation? 64bit support seemed to be the main demand from users regardless of the full understanding of the matter, at least to extend the 4GB barrier. There is no small market share. There is the market share that demands and needs it. Spectrasonics, VSL make professional products with a professional price tag. And I guess the majority of professional users that use those products feel the daily pain of the 4GB memory limitation in the 32bit environment, not a kid that tinkers with Garageband after school. If the software developer for Ivory II at this moment still evaluating the priority of a 64bit AU plugin then I guess they live in a different universe if they don't realize that they targeting the same professional clients as Spectrasonics and VSL.
Again it is up to the (Logic Pro) users to give those developers a wake up call, Summer vacation over, let's get that stuff out before Christmas for Christ sake (so to speak).

Flickering graphics in Logic - especially 3rd party plugins

I see a lot of people reporting (myself included) "flickering" of graphics in Logic, especially in 3rd party plugins so I decided to post a video of it occurring. Is this a "known issue"? I will be reporting it to Apple, and I hope everyone else experiencing it will do the same. Please watch the video and provide any input that you might have. Thanks!
https://youtu.be/y_G0Q8J2Egw

Hi Clancy,
Could it be related to a Retina display?
Possibly... but as you know, I cannot test for that as i don't have a Retina display... (and frankly I'm not sure I want one at this time ) and I could recreate it on a standard screen using the same 3rd party plugin as the OP used... so i think it isn't specifically a Retina issue but... maybe retina 'enhances' the problem because of the extra load placed on the Graphical hardware/routines
So...
Is the OP is using a Retina display with his Mac Pro?
I suspect however, given the video he posted, demonstrating the issue occurring with the PSP MasterQ2 plugin...that it's only happening with some 3rd party plugins.... (as again he stated "especially with 3rd party plugins" which really might mean... only with.. depending on how you 'translate' that) and therefore my comments earlier.
Finally while the number of posts about this issue is actually rather small ( as far as i can determine from some detailed searching at least).... the thread on GS seems to indicate it's been going on since early versions of LPX and is related to Yosemite rather than LPX itself...
https://www.gearslutz.com/board/logic-pro-x/987219-logic-10-1-0-crazy-flashing-g raphics-plugins.html
...and some people have been reporting the same sort of flickering issues with other 3rd party apps and also plugins for apps like Aperture for example... after upgrading to 10.10... again indicating its a general Yosemite issue rather than a specific app issue.

Will my 3rd party plugins be detected by Logic X?

I have logic pro 9 right now, if I uninstall it and leave my 3rd party plugins be and then install Logic X, will Logic X be able to pick up these right away? obviously the 64 bit plugins/instruments.

thanks for the quick response

How can i get 3rd party plugins for logic such as massive or nexus?

how can i get 3rd party plugins for logic such as massive or nexus?

Buy the 64bit AU versions from their respective online stores...
Massive can be found at;
http://www.native-instruments.com/en/products/komplete/synths-samplers/massive/p ricing/?content=2115
Nexus 2 (as Nexus 1 will not work with Logic Pro X) from;
http://refx.com/products/nexus/summary/
However, I suspect, based on the fact you could have simply searched on Google.. that buying them wasn't what you had in mind.................

How do you install and delete 3rd party plugins from Logic 9?

I have been trying to install RX2 from iZotope with no success. I can authorize it in the standalone version but not in logic. I had a previous demo version of it installed and everytime I went to authorize it would point to the earlier version and not authorize and run in demo. I removed a number of files pertaining to it from HD & User/ Library/ Preferences and Audio/ Components and tried reinstalling. Now it doesn't even show up in the plugin list. Can anyone tell me how to clear this up? Also, how to deal with 3rd party plugins. What can I say, no problems with Reaper! Appreciate any help with this. Thanks

The Isotope website isn't very clear about it.. It seems to indicate the Windows version is 32 and 64 bit where as the AU version is 32bit and will work/is compatible with Logic 64bit.. which it will as it will run under the 32 to 64bit bridge... when Logic is run in 64bit mode..but as i said, it's hard to tell one way or the other.
The thing is, if you simply reinstall it.. and then run Logic first in 32bit mode and then in 64bit mode.. it should show up.
Where are you looking for it in Logic?
Does it show up in the AU Plugin Manager? (after, that is you have reinstalled it)

Logic 9 - 3rd Party Plugin Settings not rememebered

Is anyone else having these problems?
GearBox and PodFarm don't recall their settings after Logic 8 to Logic 9 upgrade, so compete mixes have GONE!!!!
Wave Burner does the same thing with 3rd Party Plugins!!!!! Ozone is not recalling anything.
This is REALLY REALLY REALLY REALLY BAD!
I've lost weeks, months and in some cases YEARS of work on some projects.
Thanks Apple, lovely.

This is the wrong forum (because it is clearly not a general problem with AudioUnits), you should contact the plugin manufacturers!
I don't know GearBox and PodFarm, but Ozone is incompatible with a new feature in WaveBurner and needs an update.

3rd party plugins not working after archive and install

hi,
i have a few 3rd party plugins in my logic pro, such as all the native instruments, waves diamond, ik multimedia plugins, atmosphere and a few more,
i was getting an error on my g5 when i tried to run diskwarrior from the disk. it was the kernal panic message, it said i had to restart my mac, therefore i couldnt run diskwarrior from disk.
i did a bit of research and a few people suggested doing a archive install, so i did.
well what do you know, i had to re-install logic 8 again. other programmes such as transcribe, itunes idvd imovie etc were ok.
but logic didnt load up, o i had to re-install logic again,
also before i did that i checked to see if my 3rd party plugin were working in standalone, so i check all the native instruments and they seemed to work ok, T-racks deluxe works fine, so i thought they should all load up in logic.
once logic was installed again and had to get all the updates all my 3rd party plugins did not show up on my AU validation.
is there a way to get logic to see my 3rd party plugins or do i have to re-install all of them again.
cheers for the help
lib

Then check if the NI AU components are actually where they should be:
HD/Library/Audio/Plug-Ins/Components
If not copy them over from your "previous systems" folder which was created on your HD during the archive and install process.

3rd Party Plugins Have Disappeared After OS X Mavericks Update

Hi. I'm have a bit of a panic here.
I'm a sound engineer and I use Mainstage 2 frequently to run all FX live for a variety of artists.
After reading forums with regards to the Mavericks update, I found no evidence of it causing issues with Mainstage of Logic.
HOWEVER, I upgraded from Snow Leopard to Mavericks yesterday and Mainstage has decided to throw a massive wobbly. When I load up my show, it says "The plug-in named 'XXXXX' is not available on your sysem." It's done this for every single 3rd-party plugin on my machine so I basically have nothing! Good one Apple!
I restored my machine to a backup I took just before the OS upgrade. Guess what.......it's even doing it there now! It's back on Snow Leopard. I've been into the folders and all the plugins are there. For some reason, Mainstage isn't finding them. I'm at a total loss and about to throw this thing out the window.
Can anybody save me???
Thanks.
Jonny

Verified and repaired disk permissions but still no luck.
I thought Time Machine was meant to put the computer back to its exact state at the time of back-up?!
Anybody know if there's a UK phone number for an expert on Logic/Mainstage?!
Thanks.

Where can i find the sample instruments in logic pro x.the proper plugins

Where can i find the sample instruments in logic pro x.the proper plugins. or third party plugins too where can i find them and how in logic pro x can anyone help me please.

My understanding is that if it was purchased throught the App Store, then there is no requirement for a serial number. At which point does it ask you for the serial?

Sort 3rd party plugins by categories

Hi there,
If this has already been asked, my apologies, I haven't found an answer to it using the search engine.
Is there a way to sort 3rd party plugins by categories, like Logic's built-in plugs (Compressors, EQs, Delays, Reverbs, etc...)?
It would be much better to search the plugins by category than by manufacturer name, don't you think?
Again, sorry if this is an old question.
And thanks in advance.

The problem with organising your plugins into channel strips is that it works fine to load the complete channel strip, but obviously cannot be used to load individual plugins on a channel.
I would like to be able to organise/customise my plugin menu in the way that best suits me, including not having to scroll all the way down to the third-party list and so on - I agree that this way of loading plugins is pretty inefficient.
Unfortunately, while this is technically easier using a Mackie Control (because you can scroll through the plugins with a knob before clicking it to load that selected plugin) - it's also next to useless because the plugin list is seemingly random, meaning that each time you scroll to a new plugin, you have no idea whether this is going to be the one you want, or whether it will take another 53 knob turns before you get there.
The library is supposed to be the redeveloped solution for this, and while it helps to a degree I actually don't like wasting a quarter of the available screen space having it open, or hitting a key command to open and close it just to load plugins. But you can't load individual plugins from the library anyway - it's either channel strips, or plugin settings/instruments. There is no way to highlight the plugin slot and then see your plugin list - so we are back to the navigate through four sub menus dance to load a plugin.
So none of the current methods are particularly good, imo. I'd like to see something better. At the very list, a menu list of "Favourite Plugins" at the top of the menu list which you could organise and choose which plugins should go in there.

All 3rd party plugins gone after update !!! HELP APPLE !!!!!!

All my 3rd party plugins are gone after the new update from apple !! I am running lep and logic studio G5 dual 2.5 ppc 8 gigs of ram !!!! What happen ???? Can not get the AU manger to launch !!!!! Help dead in the water !!!!!!!

Relax guy!
Try trashing to audiounits cache, and the Logic caches:
user/library/caches/com.apple.audiounits.cache
and
user*/library/caches/Logic/
Reboot, and try again...

Leopard logic pro 8 3rd party plugins

Similar Messages

Maybe you are looking for