Leopard Mail and Filemaker pro - "Send Mail" is s-l-o-w

When I upgraded to Leopard, I began having a problem with the "Send Mail" function in Filemaker Pro, even after I upgraded to the latest version. Previously, sending mail with an attachment to 300 BCC addresses went very quickly - about 10 seconds. Since Leopard, I have begun seeing each address get loaded into the BCC line, an operation taking 20 minutes or more. Has anyone else seen this, and are there any suggestions on how to remedy it?

You might try this.
MAC Mail, for some reason, wants a DNS server setting in the network setup.
Under System Preferences, go to Network and add your DNS numbers for your ISP Server. Get the right numbers from your ISP. I did a search for "DNS" on the ATT/YAHOO member web site.
This fixes the slow checking and sending of mail....It also fixes problems where mail sends slow and may give Authentication errors.
I spent many hours on this and finally the answer was posted on this forum.
Public DNS servers are less likely to be changed. They have been tried and do work. Nobody knows why.
For Public DNS servers look at.
http://www.tech-faq.com/public-dns-servers.shtml

Similar Messages

Not receiving some mail and can't send mail to myself

I've been trying to get a password reset link from Paypal (which I haven't used since before I got my new Imac) but I'm not getting any of their emails. I called their tech support and had them send it twice more, but I'm still not getting anything and they have no clue what the problem is, even though I do get adverts from them. I tried sending myself an email and I can't get that either. I've been using AT&T internet for years so I'm forced to have email on my yahoo page as well as standard mac mail but I'm not getting the emails on my yahoo account (same address) either. What is going on and how can I fix it? Software is Lion 10.6.8

I would check each smtp server and ports and imap or pop3 depending on your mail provider
settings up against the mail providers listed settings to verify that your settings are set correctly

TS3899 With Yahoo Mail, and anotare account (Inacap Mail), I can only receive mails but I can't send emails. I don't know if this is a problem of the iPad or it is a problem with yahoo mail, because using Gmail and the email of my job I don' have this pro

With Yahoo Mail, and anotare account (Inacap Mail), I can only receive mails but I can't send emails. I don't know if this is a problem of the iPad or it is a problem with yahoo mail, because using Gmail and the email of my job I don' have this problem.

Google them to confirm the settings that you need for the outgoing server, then check the setting you entered on the pad. Pay real close attention to the outgoing server name, and port. You may need to change in on the pad.

TS3276 Safari mail off-line and can't send mail?

I'm using Mountain Lion 10.8.2 on my MacBook Pro. While incoming Safari Mail seems to be working fine, more often than not, I can't send mail. On further investigation with Connection Doctor, I can connect to the Internet, but my SMTP outgoing pop A/C is offline, and I cannot send mail. Is there a solution to going online to correct this problem? Many thanks.
DenMan1

Do you really mean Safari - the web browser? If so, you should contact your mail service for support. If you mean Mail - the program, (the little postage stamp icon in the Dock), have a look here:
Mail: Troubleshooting sending & receiving email messages
charlie

How do I specify the gmail outgoing server if I have multiple gmail accounts in my mail? I have 2 business accounts and when I send mail from one account, it is sent from the other account and the sending email is not from the correct account.

I love my apple email and do not want to use google mail on safari. However, I have 2 gmail accounts set up on apple mail, but when I send mail from one of my gmail accounts (I choose the specific gmail account in the drop down window), it actually goes out as if it is from the other gmail account. I can't have that happen because one is my job, the other is a personal business account and unfortunately, the mail from both gmail accounts want to send through the personal business account. How do I make it send from a specific gmail account? I even tried deleting the accounts and setting them up again hoping I set it up wrong in the first place, but to no avail, it is still doing the same thing except this time I set the job account up first and then the personal business account and now everything goes from the job account! The only good thing is that the incoming messages work properly and they go into the correct inbox. Somebody please fix my outbox!

In Mail Preferences/Accounts/each GMail account, set up the SMTP Outgoing Server for each account separately, going into SMTP name/edit/Advanced and specify the Username of each account. The Outgoing servers must be two different servers, authenticated by the Username and Password of each.
Otherwise, the GMail SMTP server will change the from address to that of the account where the SMTP server was setup.
Ernie

I use a iphone and MacBook Pro using mail on each. How can I see the same mail boxes on the laptop that I see on the iPhone?

I use a iphone and MacBook Pro using mail on each. How can I see the same mail boxes on the laptop that I see on the iPhone?

for starters this is not the forum for notebooks or for that matter icloud or iphone.
MacBook Pro
https://discussions.apple.com/community/notebooks/macbook_pro
https://discussions.apple.com/community/mac_os?view=discussions
http://www.apple.com/support/macbookpro
http://www.apple.com/support/iphone

Just updated to os x 10.9.2 on 3/5/2014 and i cannot send mail does anyone know how to fix this

i just updated to osx 10.9.2 on 3/5/2014 and i cannot send mail
does anyone know how to fix this (the smpt shows as off line - the certificate shows as none)

i figured out a solution if anyone is having the same problem
go to preferences in mail
pick the mail account that is not sending
if your outgoing mail server states it offline as mine did
click the dropdown and than click edit smtp
a window will come up that says account information and advanced
click advanced
renter your password and ok
restart your computer - when it restarts it will send emails

Script spol to mail , and report which sends output to spools

Hi All,
Please give me
script spol to mail , and report which sends output to spool.
thaks,
babu

Hi,
Check the below code:
scripts through email:
*& Report ZRICHA_OTF_PDF
report zricha_otf_pdf
    message-id zz.
CONSTANTS                                                           *
constants : c_x(1)      type c value 'X',      " For constant value
            c_otf(3)    type c value 'OTF',    " For format
            c_u(1)      type c value 'U'.      " Mail Option
VARIABLES                                                           *
data : v_rqident type tsp01-rqident, " For Spool Number
       v_rqclient type tsp01-rqclient, " For Client
       v_rqo1name type tsp01-rqo1name, " For Object name
       v_spool    type tsp01-rqident, " For Spool Number
       v_spool1   type tsp01-rqident. " For Spool Number
FLAGS                                                               *
data : f_spool type c.
INTERNAL TABLES                                                    *
Internal table for sending mails
data: it_pdf          like tline      occurs 10 with header line,
      it_xi_pdf       like tline      occurs 0 with header line,
      it_html         like solisti1   occurs 0 with header line,
      it_xi_temp      like bapiqcmime occurs 0 with header line,
      it_xi_mime(255) type c          occurs 0 with header line.
For sending mail
data: it_objpack like sopcklsti1 occurs 2 with header line.
Internal table for Single List with Column Length 255
data : it_objbin like solisti1 occurs 10 with header line.
Internal table for Single List with Column Length 255
data : it_objtxt like solisti1 occurs 10 with header line.
Internal table for Structure of the API Recipient List
data : it_reclist like somlreci1 occurs 5 with header line.
Structure of the API Recipient List
data: x_doc_chng like sodocchgi1.
Internal table for storing the variants
data : begin of it_variant1 occurs 0,
        variant like varid-variant,
       end   of it_variant1.
Internal table to store variants for the programs
data: it_variant2 like it_variant1 occurs 0 with header line.
Internal table for storing the selected values
data it_return type ddshretval occurs 0 with header line.
Internal table for storing the mail-ids
data : begin of it_mailid occurs 0,
        kokrs like csks-kokrs,
        kostl like csks-kostl,
        datbi like csks-datbi,
        telx1 like csks-telx1,
       end   of it_mailid.
Internal table for storing the mail-ids
data : it_mailid1 like it_mailid occurs 0 with header line.
SELECTION SCREEN                                                   *
data : v_char type char50.
selection-screen begin of block b1 with frame title text-001.
select-options: s_email for v_char no intervals
                lower case
                no-display.
select-options: s_email1 for v_char no intervals
                lower case
                no-display.
selection-screen end of block b1.
selection-screen begin of block a1 with frame title text-028.
selection-screen begin of line.
parameters : p_c1 as checkbox.
selection-screen comment 3(66) text-026 for field p_c1.
selection-screen end of line.
parameters : p_set like tsp1d-papart matchcode object zh_tsp1d.
selection-screen skip 1.
parameters : p_vara1 type rs38m-selset.
selection-screen end of block a1.
selection-screen begin of block a2 with frame title text-029.
selection-screen begin of line.
parameters : p_c2 as checkbox.
selection-screen comment 3(56) text-027 for field p_c1.
selection-screen end of line.
parameters : p_set1 like tsp1d-papart matchcode object zh_tsp1d.
selection-screen skip 1.
parameters : p_vara2 type rs38m-selset.
selection-screen end of block a2.
AT SELECTION SCREEN ON VALUE REQUEST
at selection-screen on value-request for p_vara1.
For fetching the variants available for the program
perform fetch_variants.
at selection-screen on value-request for p_vara2.
For fetching the variants available for the program
perform fetch_variants1.
AT SELECTION SCREEN
at selection-screen.
For Validation
perform validation.
START OF SELECTION                                                  *
start-of-selection.
To get the output data and mail
perform fetch_data.
END OF SELECTION                                                    *
end-of-selection.
if f_spool = c_x.
    message e000 with 'Spool Not Generated'(060).
endif.
*&      Form fetch_data
      To get the output data and mail
form fetch_data .
To send the output to spool
perform generate_spool.
endform.                    " fetch_data
*&      Form generate_spool
      To send the output to spool
form generate_spool .
data: l_params like pri_params,
        l_days(1) type n value 2,
        l_count(3) type n value 1,
        l_valid    type c,
        l_valid1   type c,
        l_params1 like pri_params.
data: l_device type usr01-spld.
*Get the printer name for the user
select single spld into l_device from usr01 where bname = sy-uname.
if l_device is initial.
    l_device = 'LOCL'.
endif.
For report-1
if p_c1 = 'X'.
Setting the print parameters
    call function 'GET_PRINT_PARAMETERS'
      exporting
        destination    = l_device
        copies         = l_count
        list_name      = sy-uname
        list_text      = 'SUBMIT ... TO SAP-SPOOL'(008)
        release        = c_x
        new_list_id    = c_x
        expiration     = l_days
       LINE_SIZE      = 255
       LINE_COUNT     = 65
        layout         = p_set
        sap_cover_page = space
        cover_page     = space
        receiver       = 'SAP*'(010)
        department     = 'System'(011)
        no_dialog      = c_x
      importing
        out_parameters = l_params
        valid          = l_valid.
    if l_valid <> space.
      clear v_spool.
Fetch the spool number b4 submit
      perform fetch_recent_spool using v_spool.
Submitting the program to spool
      submit rkaep000 to sap-spool
        using selection-set p_vara1
        spool parameters l_params
        without spool dynpro
        and return.
      clear v_spool1.
Fetch the spool number after submit
      perform fetch_recent_spool using v_spool1.
      if v_spool = v_spool1.
        f_spool = c_x.
        if p_c2 is initial.
          stop.
        endif.
      else.
Checking the format ( ABAP/OTF)
        perform format_check tables s_email.
      endif.
    else.
      message e000 with 'Problem in print settings'(003).
      stop.
    endif.
endif.
For Report-2
if p_c2 = 'X'.
Setting the print parameters
    call function 'GET_PRINT_PARAMETERS'
      exporting
        destination    = l_device
        copies         = l_count
        list_name      = sy-uname
        list_text      = 'SUBMIT ... TO SAP-SPOOL'(008)
        release        = c_x
        new_list_id    = c_x
        expiration     = l_days
       LINE_SIZE      = 200
       LINE_COUNT     = 65
        layout         = p_set1
        sap_cover_page = space
        cover_page     = space
        receiver       = 'SAP*'(010)
        department     = 'System'(011)
        no_dialog      = c_x
      importing
        out_parameters = l_params1
        valid          = l_valid1.
    if l_valid1 <> space.
      clear v_spool.
Fetch the spool number b4 submit
      perform fetch_recent_spool using v_spool.
Submitting the program to spool
      submit gp3diehxy88snfj0391v7kf9ek7050 to sap-spool
        using selection-set p_vara2
        spool parameters l_params1
        without spool dynpro
        and return.
      clear v_spool1.
Fetch the spool number after submit
      perform fetch_recent_spool using v_spool1.
      if v_spool = v_spool1.
        message e000 with 'Spool Not Generated'(060).
        stop.
      endif.
Checking the format ( ABAP/OTF)
      perform format_check tables s_email1.
    else.
      message e000 with 'Problem in print settings'(003).
      stop.
    endif.
endif.
endform.                    " generate_spool
*&      Form fetch_recent_spool
      Fetch the recent spool number generated
form fetch_recent_spool using p_v_spool type tsp01-rqident .
data: l_user like tsp01-rq2name.
clear : v_rqident,
          v_rqclient,
          v_rqo1name.
l_user = sy-uname.
Get latest Spool No
select single rqident
                rqclient
                rqo1name
         into (v_rqident , v_rqclient , v_rqo1name)
    from tsp01
   where rqcretime =   ( select max( rqcretime )
                                from tsp01
                               where rq2name eq l_user
                                 and rqfinal eq '.' ).
if sy-subrc = 0 .
    p_v_spool = v_rqident.
endif.
endform.                    " fetch_recent_spool
*&      Form format_check
      Checking the format ( ABAP/OTF)
form format_check tables p_s_email structure s_email.
data : l_objtype    like rststype-type.
call function 'RSTS_GET_ATTRIBUTES'
    exporting
      authority     = 'SP01'(019)
      client        = v_rqclient
      name          = v_rqo1name
      part          = 1
    importing
      objtype       = l_objtype
    exceptions
      fb_error      = 1
      fb_rsts_other = 2
      no_object     = 3
      no_permission = 4.
if sy-subrc <> 0.
    message id sy-msgid type sy-msgty number sy-msgno
            with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
endif.
if l_objtype(3) = c_otf.
Convert OTF Spool to PDF
    perform convert_otf2pdf tables p_s_email.
else.
Convert ABAP Spool to PDF
    perform convert_abap2pdf tables p_s_email.
endif.
endform.                    " format_check
*&      Form convert_otf2pdf
      Convert OTF Spool to PDF
form convert_otf2pdf tables p_p_s_email structure s_email .
clear   it_pdf.
refresh it_pdf.
data : l_bytecount type i.
Fn. to get the PDF format
call function 'CONVERT_OTFSPOOLJOB_2_PDF'
    exporting
      src_spoolid              = v_rqident
      no_dialog                = 'X'
    importing
      pdf_bytecount            = l_bytecount
    tables
      pdf                      = it_pdf
    exceptions
      err_no_otf_spooljob      = 1
      err_no_spooljob          = 2
      err_no_permission        = 3
      err_conv_not_possible    = 4
      err_bad_dstdevice        = 5
      user_cancelled           = 6
      err_spoolerror           = 7
      err_temseerror           = 8
      err_btcjob_open_failed   = 9
      err_btcjob_submit_failed = 10
      err_btcjob_close_failed = 11.
if sy-subrc = 0.
For page format
    perform page_format tables p_p_s_email.
else.
    message id sy-msgid type sy-msgty number sy-msgno
            with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
endif.
endform.                    " convert_otf2pdf
*&      Form convert_abap2pdf
       Convert ABAP Spool to PDF
form convert_abap2pdf tables p_p_s_email structure s_email.
clear   it_pdf.
refresh it_pdf.
data : l_bytecount type i.
Fn. to convert to PDF format
call function 'CONVERT_ABAPSPOOLJOB_2_PDF'
    exporting
      src_spoolid              = v_rqident
      no_dialog                = 'X'
    importing
      pdf_bytecount            = l_bytecount
    tables
      pdf                      = it_pdf
    exceptions
      err_no_abap_spooljob     = 1
      err_no_spooljob          = 2
      err_no_permission        = 3
      err_conv_not_possible    = 4
      err_bad_destdevice       = 5
      user_cancelled           = 6
      err_spoolerror           = 7
      err_temseerror           = 8
      err_btcjob_open_failed   = 9
      err_btcjob_submit_failed = 10
      err_btcjob_close_failed = 11.
if sy-subrc = 0.
For page formatting
    perform page_format tables p_p_s_email.
else.
    message id sy-msgid type sy-msgty number sy-msgno
            with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
endif.
endform.                    " convert_abap2pdf
*&      Form send_mail
      For sending mail
form send_mail tables mail structure s_email .
Structures and internal tables for the send data
data: objpack like sopcklsti1 occurs 2 with header line,
        objhead like solisti1   occurs 1 with header line,
        objbin like solisti1   occurs 0 with header line,
        objtxt like solisti1   occurs 10 with header line,
        reclist like somlreci1 occurs 5 with header line.
data: doc_chng like sodocchgi1,
        tab_lines like sy-tabix.
Data for the status output after sending
data: sent_to_all like sonv-flag.
clear: it_reclist, it_reclist[],
         it_objtxt , it_objtxt[],
         it_objpack, it_objpack[],
         it_objbin , it_objbin[],x_doc_chng.
loop at it_html.
    objbin-line = it_html-line.
    append objbin.
    clear objbin.
endloop.
Create the document which is to be sent
doc_chng-obj_name = 'List'(012).
doc_chng-obj_descr = 'Mail'(013).
Heading
objtxt-line = 'Mail with pdf attachment'(014).
append objtxt.
clear objtxt.
Size
describe table objtxt lines tab_lines.
read table objtxt index tab_lines.
doc_chng-doc_size = ( tab_lines - 1 ) * 255 + strlen( objtxt ).
Fill the fields of the packing_list for the main document:
clear objpack-transf_bin.
The document needs no header (head_num = 0)
objpack-head_start = 1.
objpack-head_num = 0.
Body
objpack-body_start = 1.
objpack-body_num = tab_lines.
objpack-doc_type = 'RAW'(015).
append objpack.
Create the attachment (the list itself)
describe table objbin lines tab_lines.
Fill the fields of the packing_list for the attachment:
objpack-transf_bin = 'X'.
Header
objpack-head_start = 1.
objpack-head_num = 0.
Body
objpack-body_start = 1.
objpack-body_num = tab_lines.
objpack-doc_type = 'PDF'(016).
objpack-obj_name = 'Attachment'(017).
objpack-obj_descr = 'Mail with pdf Attachment'(018).
objpack-doc_size = tab_lines * 255.
append objpack.
*-Fill the mail recipient list
loop at mail.
    reclist-receiver = mail-low.
    reclist-rec_type = c_u.
    append reclist.
    clear: reclist,
           mail.
endloop.
*-Send the document by calling the SAPoffice API1 module for sending
*-documents with attachments
call function 'SO_NEW_DOCUMENT_ATT_SEND_API1'
    exporting
      document_data              = doc_chng
      put_in_outbox              = c_x
      commit_work                = c_x
    importing
      sent_to_all                = sent_to_all
    tables
      packing_list               = objpack
      object_header              = objhead
      contents_bin               = objbin
      contents_txt               = objtxt
      receivers                  = reclist
    exceptions
      too_many_receivers         = 1
      document_not_sent          = 2
      operation_no_authorization = 4
      others                     = 99.
case sy-subrc .
    when 0.
      message i000 with 'Mail has been sent successfully'(006).
    when others.
      message e000 with 'Problem in sending the mail'(023).
endcase.
endform.                    " send_mail
*&      Form page_format
       For page foramtting
form page_format tables email structure s_email .
data : l_lines       type i,
         l_temp(500)   type c,
         l_offset      type p,
         l_lineslen(2) type p,
         l_mimelen(2) type p,
         l_tabix       like sy-tabix.
clear : it_xi_pdf,
          it_xi_temp.
refresh : it_xi_pdf,
            it_xi_temp.
it_xi_pdf[] = it_pdf[].
Reformat the line to 255 characters wide (code from SAP)
clear: l_temp, l_offset, it_xi_temp.
describe table it_xi_pdf   lines l_lines.
describe field it_xi_pdf   length l_lineslen in character mode.
describe field it_xi_temp length l_mimelen in character mode.
loop at it_xi_pdf.
    l_tabix = sy-tabix.
    move it_xi_pdf to l_temp+l_offset.
    if l_tabix = l_lines.
      l_lineslen = strlen( it_xi_pdf ).
    endif.
    l_offset = l_offset + l_lineslen.
    if l_offset ge l_mimelen.
      clear it_xi_temp.
      it_xi_temp = l_temp(l_mimelen).
      append it_xi_temp.
      shift l_temp by l_mimelen places.
      l_offset = l_offset - l_mimelen.
    endif.
    if l_tabix = l_lines.
      if l_offset gt 0.
        clear it_xi_temp.
        it_xi_temp = l_temp(l_offset).
        append it_xi_temp.
      endif.
    endif.
endloop.
clear : it_xi_mime,
          it_xi_mime[].
loop at it_xi_temp.
    it_xi_mime(255) = it_xi_temp-line.
    append it_xi_mime.
    clear it_xi_mime.
endloop.
Final Data
clear : it_html,
          it_html[].
it_html[] = it_xi_mime[].
For sending mail
perform send_mail tables email.
endform.                    " page_format
*&      Form fetch_variants
      For fetching the variants available for the program
form fetch_variants .
data : l_program like rs38m-programm value 'RKAEP000',
         l_vara1 type dfies-fieldname value 'P_VARA1'.
clear : it_variant1,
          it_variant1[].
Get variants
perform get_variants tables it_variant1
                       using l_program.
F4 Help
if not it_variant1[] is initial.
    perform get_f4_help tables it_variant1
                         using l_vara1
                        changing p_vara1.
else.
    message e000 with 'No variants available for report1'(054).
endif.
endform.                    " fetch_variants
*&      Form validation
      For Validation
form validation .
data : l_pro1 like rs38m-programm value 'RKAEP000',
         l_pro2 like rs38m-programm value 'GP3DIEHXY88SNFJ0391V7KF9EK7050',
         l_c1,
         l_c2.
If both check-box are unchecked
if p_c1 is initial
and p_c2 is initial.
    message e000 with 'Check any one check-box'(049).
endif.
If checked without varaint
if not p_c1 is initial and p_vara1 is initial.
    message e000 with 'Please give any one of the variant for report1'(055).
endif.
If checked without varaint
if not p_c2 is initial and p_vara2 is initial.
    message e000 with 'Please give any one of the variant for report2'(061).
endif.
Reading the variant and fetching the mail-ids
if p_c1 = c_x.
    l_c1 = '1'.
    clear : s_email,
            s_email[].
    perform read_variants tables it_mailid
                                 s_email
                           using p_vara1
                                 l_pro1
                                 l_c1.
    if s_email[] is initial.
      message e000 with 'No Id available for given Cost report1'(066).
    else.
      sort s_email by low.
      delete adjacent duplicates from s_email comparing low.
    endif.
endif.
Reading the variant and fetching the mail-ids
if p_c2 = c_x.
    clear : s_email1,
            s_email1[].
    l_c2 = '2'.
    perform read_variants tables it_mailid1
                                 s_email1
                           using p_vara2
                                 l_pro2
                                 l_c2.
    if s_email1[] is initial.
      message e000 with 'No Id available for given Cost report2'(067).
    else.
      sort s_email1 by low.
      delete adjacent duplicates from s_email1 comparing low.
    endif.
endif.
endform.                    " validation
*&      Form GET_VARIANTS
      Fetching Variants
form get_variants tables   p_it_variant structure it_variant1
                   using    p_v_program type rs38m-programm.
select variant
         from varid
         into table p_it_variant
         where report = p_v_program.
endform.                    " GET_VARIANTS
*&      Form GET_F4_HELP
      text
form get_f4_help tables   p_it_variant1 structure it_variant1
                   using   p_l_vara1 like dfies-fieldname
                  changing p_p_vara like p_vara1.
Fn. for Pop-Up
call function 'F4IF_INT_TABLE_VALUE_REQUEST'
    exporting
      retfield        = p_l_vara1
      value_org       = 'S'
      display         = ' '
    tables
      value_tab       = p_it_variant1
      return_tab      = it_return
    exceptions
      parameter_error = 1
      no_values_found = 2
      others          = 3.
if sy-subrc = 0.
    p_p_vara = it_return-fieldval.
else.
    message id sy-msgid type sy-msgty number sy-msgno
            with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
endif.
endform.                    " GET_F4_HELP
*&      Form FETCH_VARIANTS1
      text
form fetch_variants1 .
data : v_program1 like rs38m-programm value 'GP3DIEHXY88SNFJ0391V7KF9EK7050',
         l_vara2 type dfies-fieldname value 'P_VARA2'.
clear : it_variant2,
          it_variant2[].
Get Variants
perform get_variants tables it_variant2
                       using v_program1.
F4 Help
if not it_variant2[] is initial.
    perform get_f4_help tables it_variant2
                        using l_vara2
                      changing p_vara2.
else.
    message e000 with 'No variants available for report2'(050).
endif.
endform.                    " FETCH_VARIANTS1
*&      Form read_variants
       Reading the variant and fetching the mail-ids
form read_variants tables p_it_mailid structure it_mailid
                          p_s_email   structure s_email
                   using p_p_vara1   like p_vara1
                          p_l_pro1    like rs38m-programm
                          p_l_c1      type c.
data : l_temp(44),
         it_valutab like rsparams occurs 0 with header line.
ranges : r_cocen for csks-kostl.
Function Module to get the variant contents
call function 'RS_VARIANT_CONTENTS'
    exporting
      report               = p_l_pro1
      variant              = p_p_vara1
    tables
      valutab              = it_valutab
    exceptions
      variant_non_existent = 1
      variant_obsolete     = 2
      others               = 3.
if sy-subrc <> 0.
    message id sy-msgid type sy-msgty number sy-msgno
            with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
endif.
clear : r_cocen,
          r_cocen[].
loop at it_valutab where selname = 'KOSTL'
                        or selname = '_C-CCTR'.
Getting the range of cost centers
    if it_valutab-option = 'BT'.
      r_cocen-low    = it_valutab-low.
For Conversion Routine
      perform conversion using r_cocen-low.
      r_cocen-high   = it_valutab-high.
For Conversion Routine
      perform conversion using r_cocen-high.
      r_cocen-option = 'BT'.
      r_cocen-sign   = 'I'.
      append r_cocen.
      clear r_cocen.
    endif.
Getting the single cost centers
    if it_valutab-option = 'EQ'.
      r_cocen-low    = it_valutab-low.
For Conversion Routine
      perform conversion using r_cocen-low.
      r_cocen-option = 'EQ'.
      r_cocen-sign   = 'I'.
      append r_cocen.
      clear r_cocen.
    endif.
endloop.
If no cost centers
if not r_cocen[] is initial.
    select kokrs
           kostl
           datbi
           telx1
      from csks
           into table p_it_mailid
     where kostl in r_cocen.
    if p_it_mailid[] is initial.
      if p_l_c1 = '1'.
        message e000 with 'No IDs available for report1'(059).
      elseif p_l_c1 = '2'.
        message e000 with 'No IDs available for report2'(062).
      endif.
    endif.
Deleting the blank entries
    delete p_it_mailid where telx1 = space.
    clear l_temp.
    read table p_it_mailid index 1.
    l_temp = p_it_mailid-telx1.
    data : l_check.
    loop at p_it_mailid where telx1 <> l_temp.
      l_check = c_x.
    endloop.
For checking the unique ids
    if l_check = c_x.
      if p_l_c1 = '1'.
        message e000 with 'No unique mail-ids for report1'(058).
      elseif p_l_c1 = '2'.
        message e000 with 'No unique mail-ids for report2'(065).
      endif.
    endif.
Populating the IDs for the cost centers
    loop at p_it_mailid.
      set locale language sy-langu.
      translate p_it_mailid-telx1 to lower case.
      set locale language space .
      concatenate p_it_mailid-telx1 '@allergan.com' into l_temp.
      p_s_email-low = l_temp.
      p_s_email-sign = 'I'.
      p_s_email-option = 'EQ'.
      append p_s_email.
      clear p_s_email.
    endloop.
else.
    if p_l_c1 = '1'.
      message e000 with 'No Cost Center Available for report1'(057).
    elseif p_l_c1 = '2'.
      message e000 with 'No Cost Center Available for report2'(063).
    endif.
endif.
endform.                    " read_variants
*&      Form CONVERSION
      For Conversion Routine
form conversion using    p_it_valutab_low type c.
call function 'CONVERSION_EXIT_ALPHA_INPUT'
    exporting
      input = p_it_valutab_low
    importing
      output = p_it_valutab_low.
endform.                    " CONVERSION
REPORT Z_RMTIWARI_SEND_SPOOL_MAIL_ATT .
PARAMETERS : P_SPOOL TYPE TSP01-RQIDENT OBLIGATORY .
PARAMETERS : P_MAIL TYPE char100 OBLIGATORY .
TYPES : TY_LINE type string.
DATA: IT_ATTACHMENT TYPE soli OCCURS 0 WITH HEADER LINE.
DATA: IT_ATTACHMENT_LONG TYPE TY_LINE OCCURS 0 WITH HEADER LINE.
DATA: LV_PDF_SIZE type i.
DATA: LT_PDF type standard table of tline with header line.
PERFORM SEND_EMAIL USING P_SPOOL P_MAIL.
FORM send_email
--> X_SPOOL_ID
--> X_EMAIL
FORM send_email USING X_SPOOL_ID X_EMAIL.
DATA: LT_OBJPACK LIKE sopcklsti1 OCCURS 2 WITH HEADER LINE,
LT_OBJHEAD LIKE solisti1 OCCURS 1 WITH HEADER LINE,
LT_OBJBIN LIKE solisti1 OCCURS 10 WITH HEADER LINE,
LT_OBJTXT LIKE solisti1 OCCURS 10 WITH HEADER LINE,
LT_RECLIST LIKE somlreci1 OCCURS 5 WITH HEADER LINE,
LV_DOCUMENT_DATA TYPE sodocchgi1.
DATA: L_ATT_LINES TYPE i.
DATA : LV_SPOOL_DESC(68) type c.
CHECK NOT ( X_EMAIL IS INITIAL ).
CLEAR: LT_RECLIST, LT_RECLIST[],
LT_OBJHEAD, LT_OBJHEAD[],
LT_OBJTXT, LT_OBJTXT[],
LT_OBJBIN, LT_OBJBIN[],
LT_OBJPACK, LT_OBJPACK[].
CLEAR LV_DOCUMENT_DATA.
Read spool and get the pdf internal table and name of spool
PERFORM READ_SPOOL USING X_SPOOL_ID LV_SPOOL_DESC.
CHECK NOT ( LT_PDF[] IS INITIAL ).
Convert pdf itab to 255 line itab.
data :LV_COUNTER type i.
data :LV_FROM type i.
loop at LT_PDF.
translate LT_PDF using ' ~' .
concatenate IT_ATTACHMENT_LONG LT_PDF into it_attachment_long.
endloop.
translate IT_ATTACHMENT_LONG using '~ ' .
append IT_ATTACHMENT_LONG.
clear : LV_COUNTER.
DO.
LV_COUNTER = strlen( IT_ATTACHMENT_LONG ).
if LV_COUNTER ge 255.
IT_ATTACHMENT = IT_ATTACHMENT_LONG(255).
append IT_ATTACHMENT.
SHIFT IT_ATTACHMENT_LONG by 255 places.
else.
IT_ATTACHMENT = IT_ATTACHMENT_LONG(lv_counter).
append IT_ATTACHMENT.
exit.
endif.
ENDDO.
Body of email
MOVE 'Email sent to you from SAP' TO LT_OBJTXT.
APPEND LT_OBJTXT.
LV_DOCUMENT_DATA-obj_name = 'SpoolMail'.
Title of the email as spool name
LV_DOCUMENT_DATA-obj_descr = LV_SPOOL_DESC.
LV_DOCUMENT_DATA-sensitivty = 'O'.
LV_DOCUMENT_DATA-expiry_dat = SY-datum + 15.
LV_DOCUMENT_DATA-doc_size = STRLEN( LT_OBJTXT ).
e-mail body
CLEAR LT_OBJPACK.
LT_OBJPACK-head_start = 1.
LT_OBJPACK-head_num = 0.
LT_OBJPACK-body_start = 1.
LT_OBJPACK-body_num = 1.
LT_OBJPACK-doc_type = 'RAW'.
LT_OBJPACK-doc_size = STRLEN( LT_OBJTXT ).
APPEND LT_OBJPACK.
For e-mail attachment
DESCRIBE TABLE IT_ATTACHMENT LINES L_ATT_LINES.
READ TABLE IT_ATTACHMENT INDEX L_ATT_LINES.
CLEAR LT_OBJPACK.
LT_OBJPACK-transf_bin = 'X'.
LT_OBJPACK-head_start = 1.
LT_OBJPACK-head_num = 1.
LT_OBJPACK-body_start = 1.
LT_OBJPACK-body_num = L_ATT_LINES.
LT_OBJPACK-doc_type = 'PDF'.
LT_OBJPACK-obj_name = 'email'.
LT_OBJPACK-obj_descr = LV_SPOOL_DESC.
LT_OBJPACK-doc_size = ( 255 * ( L_ATT_LINES - 1 ) ) + STRLEN( IT_ATTACHMENT-line ).
APPEND LT_OBJPACK.
make recipient list
LT_RECLIST-receiver = X_EMAIL.
LT_RECLIST-rec_type = 'B'. "To external email id
APPEND LT_RECLIST.
send mail with attachment
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
EXPORTING
document_data = LV_DOCUMENT_DATA
put_in_outbox = 'X'
TABLES
packing_list = LT_OBJPACK
object_header = LT_OBJHEAD
contents_bin = IT_ATTACHMENT
contents_txt = LT_OBJTXT
receivers = LT_RECLIST
EXCEPTIONS
too_many_receivers = 1
document_not_sent = 2
document_type_not_exist = 3
operation_no_authorization = 4
parameter_error = 5
x_error = 6
enqueue_error = 7
OTHERS = 8.
If SY-subrc = 0.
write:/ 'Message sent'.
else.
write:/ 'Error encountered'.
endif.
ENDFORM. " send_email
*& Form read_spool
FORM read_spool USING X_SPOOL_ID Y_SPOOL_DESC.
DATA : LV_SPOOL_TYPE TYPE TSP01-RQDOCTYPE.
SELECT SINGLE RQDOCTYPE RQTITLE
INTO (lv_spool_type, y_spool_desc)
FROM TSP01
WHERE RQIDENT eq X_SPOOL_ID.
IF Y_SPOOL_DESC IS INITIAL.
concatenate 'Spool-' X_SPOOL_ID into Y_SPOOL_DESC.
ENDIF.
IF LV_SPOOL_TYPE eq 'LIST'. " If spool is a list
CALL FUNCTION 'CONVERT_ABAPSPOOLJOB_2_PDF'
EXPORTING
SRC_SPOOLID

I had an imap account in my iPad and my iPhone 4. They worked just fine till about Christmas. They act like they are checking the mail and it shows there is mail to come in, but it just goes back to saying checking mail. Can't send mail either.

I had an imap account in my iPad and my iPhone 4. They worked just fine till about Christmas. They act like they are checking the mail and it shows there is mail to come in, but it just goes back to saying checking mail. Can't send mail either.

Update to above question:
Hello All,
To anyone with the same problem described above, on THEIR iPad (if it is running iOS 7.0.2):
Go to Settings; Mail, Contacts, Calendars; DELETE your *******@btinternet.com e-mail account, that you originally set up either using 'Other', or the 'BT' option which I am sure was in the list previous to the iOS 7 update.
Then ADD a NEW account choosing YAHOO from the list of options. DO NOT USE 'OTHER'.
Enter the correct details just as you (almost certainly) had already done in your previous attempts using 'other'.
When you see the 'verifying......' and 'the blue ticks' you should be able to exit settings and open your mail app and then receive all your 'old' e-mails again, AND be able to SEND as well.
All my 'old' e-mails, were NOT found in the 'old e-mail' folder though. THEY are still in my inbox.
So this fix worked for me.
After I deleted my account from 'OTHER' and put it in Yahoo, I like other people also ended up with more folders.
I hope this works for you on YOUR Apple devices.
Bob

I can receive mail, but I cannot send mail, my mobile broadband is 3 and my server is BT

I can receive mail, but I cannot send mail, my mobile broadband is 3 and my server is BT. I have been to the Apple Store today. They did not resove my problem. Can anybody help?

Try this. Check the primary outgoing mail server username and password and make sure that they are in the settings even if it says that they are optional.
Settings > Mail, Contacts, Calendars > select the account > account name , tap on SMTP (under the 'Outgoing Mail Server' heading) and then tap on your Primary Server and try entering your email account and password and see if you can then send emails.

Mail.app will not send (att) mail. Web mail and Thunderbird can send.

Mail.app will not send (att) mail. Web mail and Thunderbird can send.

I'm having the exact same problem on my iMac. I can receive email from imap.mail.yahoo.com, but cannot receive from smtp.mail.yahoo.com. I have not changed these settings in years and as of a few days ago they stopped working. These settings work fine on my iPhone and iPad.
So far I have:
-Deleted accounts and reestablished them
-Deleted the Mail preference file ->com.apple.mail.plist

TS3276 I am no longer receiving my mail. All my settings are the same and I can send mail. The connection doctor says I am connected, but I am no longer receiving anything. If you can help, I would appreciate it. Keep it simple, please.

I am no longer receiving my mail. All my settings are the same and I can send mail. The connection doctor says I am connected, but I am no longer receiving anything. If you can help, I would appreciate it. Keep it simple, please.

How to process a text file (mail attachment) using the sender mail adapter?

Hi guys,
Is it possible to process mail attachments using the sender mail adapter? Let's say I have a structured text file (attachment) which needs to be mapped and sent to target system.
Post please any thoughts or experience.
Thanks,
Olian

Hi Olian,
Have a look at these helpful links -
1. http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/9e6c7911-0d01-0010-1aa3-8e1bb1551f05&overridelayout=true
2. http://www.riyaz.net/blog/xipi-configuring-the-sender-mail-adapter/
3. http://help.sap.com/saphelp_nw70/helpdata/en/23/c093409c663228e10000000a1550b0/content.htm
Regards,
Sunil Chandra

Mail and Exchange only fetches Mails on launch of Mail app

Mail in 10.6 set up with an Exchange 2007 account, sees all my folders, and I can send mails, but it does not automatically fetch any mails. Only upon launch of the Mail app, does it fetch new mails. I do NOT want a mail app that I have to quit and relaunch every second to check for new mails.
This is embarrasing Apple! Works perfectly with same account on my iPod Touch.

Ahh, my mistake. By accident I happened to press cmd + 0 and that activated Mails activity window doing a hectic syncing of all my mails on the Exchange server going back to 2005, when that had finished it worked just fine getting new mails every minute. Pheew! And sorry for barking at you Apple.

Having trouble receiving Yahoo mail on iPhone 6 sending mail is no problem?

Having trouble receiving Yahoo mail on iPhone 6 sending mail is no problem?

Any chance you use two step verification on your Yahoo account? If you've ever had to enter a code that was text messaged to you when you log into your Yahoo account on a new computer, then two step verification is probably on.
If that is the case, you'll have to generate an app specific password in the Yahoo web mail page and enter that as your password on your Apple Device instead of your standard password in Mail Settings.

Leopard Mail and Filemaker pro - "Send Mail" is s-l-o-w

Similar Messages

Maybe you are looking for