Leopard not recognizing some hardware

Hi!
On Tiger it recognized my Nokia 5200 but now... it doesn't and i can't transferee neither music to my nokia! anyone help me/

All,
I made an appointment at the local Apple store for the Genius Bar to find out if it was some kind of setting or a glitch with Leopard. After escalating to a 3rd and higher genius , he figured out the problem.
in Tiger, any device connected would just see it as a storage device and it would mount on the desktop appropriately. With Leopard, it actually recognizes it as a camera, so you need to tell Leopard what you want to do when it sees your camera/device. The genius hooked up my camera to one of the floor iMacs and turned it on. He then opened up Image Capture in the Applications folder. from there, choose preferences and then choose what you want to do (open with iPhoto, Image Capture, other).
I went home and did this. Now when I plug in the camera, it recognizes it and opens it up in the application that I chose.
hope this helps everyone else.
Rustyiron, original poster
PS. Kudos to Apple with it's retail stores and Genius Bar! What other manufacturer of computers (or any thing else for that matter) provides such great support for free to it's customer base.

Similar Messages

Keychain not recognizing some websites

Why does keychain not recognize some websites, the little popup asking for to save the user id and password into the keychain is not appearing.
For ex:
http://www.facebook.com/
http://login.live.com/login.srf (hotmail)

Presuming you have AutoFill enabled, in Safari preferences, save Usernames and Passwords, then I would suggest the consideration that some websites block this facility in web browsers to enhance security. These are usually financial / ebanking sites, but it may apply to others as well.

Illustrator not recognizing some fonts and colors.

My recently installed Illustrator is not recognizing certain fonts and colors which is producing problems in my designs.
1. When I drag in a PDF to edit, the letters will appear as gibberish (random numbers, letters and signs) (the font was "arquitectura" which is installed on my OS X I Mac)
2. When I try to change the color of a font using the eyedropper tool, it shows the proper color in the color box, but the font remains black.
After googling it, these problems seem frequent back in 2009 but not so much today. Im thinking it has something to do with this, which prompts when I open the application:
"Your application install seems to be damaged, Please reinstall the application."

sugarfactory,
"Your application install seems to be damaged, Please reinstall the application."
Obviously, you should. It is best to run the Cleaner Tool between uninstalling and reinstalling.
Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6

Time Machine Not Recognizing Some files as Changed ... Until I Restart

Yesterday I upgraded the HD in my Macbook Pro, and I used Time Machine to restore my stuff to the new drive. Worked like a charm, except...
First bit of strangeness: I noticed that Time Machine hadn't restored the most recent versions of some of my applications, e.g. OmniFocus, Transmission, Skim, and PTH Pasteboard. I checked my TM backup, and sure enough, it had not backed up recent updates.
I noticed that all those programs have one thing in common: built in updaters. The programs download and install the updates themselves. I used the built in updaters to get the latest versions of the above programs, then ran Time Machine. Time Machine did not back them up. Hmm...
Second bit of strangeness: Prior to my HD upgrade, I kept my iTunes Library on an external drive. After the upgrade I had enough space for my iTunes library on my internal. I changed the Library location in the iTunes prefs, then did a "Consolidate Library" in iTunes. It dutifully copied my 100+ GB of music to my internal drive.
I then did a "Backup Now" in Time Machine. It didn't recognize the that any new files had been added.
So I decided to restart my computer to see if that had any effect. Bingo! Time Machine recognized the new music files AND the programs I had updated.
Call me crazy, but this seems like a bug. Anyone else run into this problem?

I seem to have a similar problem except not solved by a restart. I have been creating and editing files today and plugged into my backup disc this evening and I cannot seem to get these files into the backup. In time machine they only appear in the Now screen.
I corrupted a backup by the power failing on the external disc during a backup, so I deleted the time machine folders for that Mac and started a new backup. That new backup does not appear to be progressing, although the time stamped versions are there.

Sound Blaster cd not recognized; Installed hardware not fo

Does anyone know if I can down load the installation for the sound blaster li've 24 bit's My computer does not recogniz the cd and though it was installed it can't find the hardware either. HELP!!!!

VegetaH wrote:
I had ordered a Dell PC with Sound Blaster Li've! I double checked and made sure I have the correct Sound Blaster which I do. I have uninstalled and reinstalled sound blaster li've! and it still does not let me update my driver. I took the CD out put it back then tried updating the driver and still it says no Sound Blaster Li've found. pls help Driver I am trying to download Sound Blaster Li've! - Li'veDrvUni-Pack (English) (23.32 MB) This package upgrades the Sound Blaster Li've! driver and enhances the overall product performance on Windows 2000 and Windows XP. The package also upgrades core applications including Audio HQ and Surround Mixer for optimal Sound Blaster Li've! performance. div>
Dell .... try if you can DL Dell 'made' drivers from Dell Support.
jutapa

Solaris 10 not recognizing new hardware

Hi,
I am running Solaris 10 (3/05) on Blade 100 and I have 2 x120GB hard discs. In boot prom probe-ide recognises them correctly and of course after adding these discs I booted the box with boot -r
In Solaris when I run format command 1st HDD is recognised properly (the one from which the box is booting) while the other one is recognised as 20GB Seagate drive which was there before I added 2nd 120GB drive which is now physically in the box.
When I select 2nd disk in format utility (which shows as 20GB Seagate drive) and I look at partitions, it all looks as if 20GB Seagate drive is still inside.
I tried booting with boot -r few more times, running sys-unconfig but on the OS level the OS just cannot recognise properly 2nd hard disc for some reason.
Would anyone have any suggestions how to get Solaris 10 to see the disc correctly?
Regards.

Hello,
the disklabel contains invalid information. Destroying the label and re-labeling the disk destroys all data.
http://supportforum.sun.com/hardware/index.php?t=msg&got o=11382
Michael

PC not recognizing Ipod hardware

I just installed my iPod software and when I plug my iPod into the USB port I get an error message saying there was trouble installing the hardware. I've re-installed the software and the same thing happens. My iPod is charged and formatted for a PC. Anyone have any other ideas?

Neal,
Did you launch the updater first and then connect the iPod?
JJ
Don't steal music !! Just a statement, not an accusation

DVD drive not recognizing some DVDs as readable

I have a brand new HP Pavilion dv6-6b47dx laptop, with Windows 7, and I'm running into an extremely annoying issue. When I try to play a regular film dvd, everything runs fine, but when I try to run a game dvd, results vary wildly....with older games, the drive has no problem reading and installing the game, but when I try to install a new game, like Skyrim or Red Orchestra 2, the drive simply does not recognize the DVDs and doesn't run the install. I'm at a loss as to what might be causing this. I bought this computer so I could take my gaming with me, but if it can't even read the latest gaming DVDs, what is it good for? Any help would be greatly appreciated.

Anyone? Bueller?

MacBook ( OS X 10.6.8 Snow Leopard) Not recognizing Dane-Elec 8 GB Flash Drive

This flash drive worked the first time I used it and it hasn't worked since.

Name : ChipsBnk Flash Disk Media
          Type :           Disk
          Partition Map Scheme :           Unformatted
          Disk Identifier :           disk1
          Media Name :           ChipsBnk Flash Disk Media
          Media Type :           Generic
          Connection Bus :           USB
          Device Tree :           IODeviceTree:/PCI0@0/EHC2@6,1
          Writable :           Yes
          Ejectable :           Yes
          Location :           External
          Total Capacity :           8.4 MB (8,388,608 Bytes)
          S.M.A.R.T. Status :           Not Supported
          Disk Number :           1
          Partition Number :           0

New Pioneer DVD drive not recognized in profiler

I have used these forums many times to solve my problems so a big thanks to everyone who contributes. I've never had to actually ask a specific questions until now so here goes....
I have an e-mac running 10.3.9. My superdrive started to get flakey (not recognizing some DVD's, spitting them out, etc.). I followed all the advice here but no luck so I finally replaced the original drive with a Pioneer DVR-118. My problems still exist and the system profiler is telling me I have a Pioneer DVR-106. Did I do something wrong on the install? Shouldn't the profiler recognize the new drive?
A big thank you to anyone who can help me through this.

Since your computer's Apple Hardware Test is on a disc and the built-in optical
drive won't work, you may have to see if an external optical drive capable of
being used as a boot, is available. This of course would be a FireWire combo
type drive that can read & write DVD & CD media and boot Macs.
You may have to see if you can archive anything worth saving from that eMac
and put it on media via another computer; if the eMac can be booted into
Target Disk Mode where it is seen by another computer as a FireWire drive.
In fact, you could see (in a reverse scenario, perhaps?) if another computer's
optical drive could be used by your eMac, if a second healthy computer is
available & then boot it into FireWire Target Disk Mode to see if you can use
the optical drive in there as though it were a peripheral. - This may not work.
I've not had to really use FireWire Target Disk Mode, but do have cables,
and an externally enclosed LaCie FW HDD which is partitioned for clones.
There are times where a FireWire externally enclosed superdrive is handy.
There may be some damage on the logic board or some circuit that does the
controlling of ATA devices on one of the buses in the computer. That would
be a possible cause of the issue. If the identity of this drive can be changed
by the user before it is installed, be sure that is set correctly for use in eMacs.
{The three eMacs I've owned, had issues early on and I got rid of them in mere
days of first purchase; at considerable distance and effort by me. Then I got
an iMac which was an unholy terror to debug after an 'authorized service' ctr
did their best to kill logic boards and sell me defective store-brand RAM they
were authorized to install in a place I was not. ThreeThousand Miles and Six
Months later, I finally got my iMac back, repaired. Only because Apple told
them to read my test notes - & just install the parts I said it originally needed.}
Do you have a second Mac nearby (presuming yes, and using it online) which
may be used to attempta further diagnostic or testing of the eMac?
Not sure if an Apple Hardware Test would be sufficient to tell the issues in
your computer; if you have a way to make use of it via external FW. Hope-
fully someone with more extensive eMac and drive experience will advise.
Good luck & happy computing!

ITUNES NOT ADDING SOME MUSIC TO LIBRARY

I updated my itunes and ipod to the most recent versions and now I have problems.
I'm losing patience and I am extremely angry.. My library and Ipod were working perfectly before the last update now I have major issues with Itunes not recognizing some songs that were already succesfully addedto my library.
Itunes no longer recognizes about 20% of the music in my library. I tried everything . Re-installs, re-adding folder, re-adding file etc... The only thing that has worked is deleting and re-adding the CD, BUT I REFUSE TO DO THIS FOR 100'S OF CD'S ALL OVER AGAIN !!!
ALSO ALL OF MY FILES WORK FINE IN WINDOWS MEDIA PLAYER AND WIN AMP... IT IS ONLY ITUNES THAT HAS THIS ISSUE.
I want some one to tell me why all other software runs these files fine but itunes won't. I have way to many songs to go back an re-enter all my music. It would take me months to do this and I WILL NOT DO THIS.
I WANT A FIX !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

I am having the exact same problem. iTunes stopped playing about 20% of the songs that were previously imported into my music library. The songs are listed in the library, but when you click on them to play, nothing happens. They used to work perfectly. I deleted the entire library and re-added my collection, and those songs that stopped playing were not included in the new library. I uninstalled and reinstalled iTunes, then re-added my collection, and those songs were still missing.
The songs are still on my hard drive, will play in Windows Media Player, and will also play in QuickTime! I've tried ading the songs individually, adding the folders, double clicking on the song in Windows Explorer to see if it will play and be copied over...and nothing.
This is VERY FRUSTRATING!!!

Built-In iSight NOT RECOGNIZED after EFI Update 1.1

After updating to EFI 1.1 on my iMac 20 Inch (2,16Ghz) the built-in iSight-Cam is not
working anymore. It´s not showing up in the system profiler > USB Devices.
I bought the iMac last week, switched it on, the cam took a picture on the user account creation,
I applied the EFI-Update and OSX 10.4.8. After that the cam was gone.
I tried everything from resetting SMC, PRAM to reinstalling Combo-Update 10.4.8 ... NOTHING helped !
Any ideas or solutions ???
P.S.: Sorry for my crappy English, I´m writing from Germany !

Here´s a report from MacFixIt.com about this problem:
http://www.macfixit.com/article.php?story=20061211231332862
Built-in iSight not recognized Some users have reported loss of their built-in iSights after applying the iMac EFI Firmware Update 1.1. In some cases, this issue can be resolved by resetting the SMC (system management controller) using this process:
1. From the Apple menu, choose Shut Down (or if the computer is not responding, hold the power button until it turns off).
2. Unplug all cables from the computer, including the power cord and any display cables.
3. Wait at least 15 seconds.
4. Plug the power cord back in, making sure the power button is not being pressed at the time. Then reconnect your keyboard and mouse to the computer.
5. Press the power button on the back to start up your computer.
Resetting PRAM can solve a variety of issues As mentioned in our coverage of recent EFI Firmware updates issued for other Macs, a number of potentially serious issues apparent after applying this EFI Firmware Update can be resolved by simply resetting PRAM/NVRAM via the following process:
Shut down your Mac, then start it back up while immediately holding the following keys: Command, Option, P and R. Hold the keys down until the computer restarts and you hear the startup sound for the third time.
This workaround is a good first course of action before exploring more complex fixes. It should also be attempted if your system cannot properly startup after applying the update.

Some data DVD's and External Hard Drives not recognized by Leopard only.

1] Some data DVDs that were burned under Tiger do not show up in Leopard. Only a dialog box asking what I want to do with the blank DVD comes up when I insert the disk. On my Tiger computer, the disk shows up perfectly fine. It is a DVD+R being used on a MBP 2ghz... and was burned on that very machine in Tiger and would load fine in Tiger. Now nothing on the same computer in Leopard. I'm going to reburn the disk on my Mac Mini on a DVD-R, but still wanted to know any ideas or input as to why it won't recognize the disk.
2] I also have an external USB2.0 HD. I formatted the disk using my G4 Mac Mini (which has Tiger) and it is not recognized on my MBP. In Disk Utility I try to reformat the drive, but it says that it cannot do so because the "resource is busy". I plug the drive back into the mac mini and it works perfectly fine. Why would this be and how do I correct it?
Full updates on both OS's. No other problems with either computer that I know of.

Unfortunately, commercial DVDs that you have bought 99.9% of the time will be copy protected and Apple's forum terms prohibit discussion of circumventing the copy protection. In various places circumventing digital copy protection is potentially illegal even if you own and intend to keep the DVD. Hence Apple do not wish DVD rippers etc discussed here.
Another problem is that AppleTv cannot play back DVDs copied to an external drive as it does not understand the format. So even if you can 'copy' your DVDs you then need to convert to h264 format to play on AppleTV.
Video formats for AppleTv are limited. They also do not support DVD like menu structures (thogh AppleTV 1 did with itunes Extras movies).
If you have unprotected video you wish to convert eg home video on DVD, then something like Handbrake or MPEGStreamclip with Apple's MPEG2 component might do the job. These programs are not DVD rippers but can process unprotected MPEG2 video.
AC

1st generation iPod not recognized on Vista - drivers / hardware not found

I have a new PC, which now very unfortunately runs Windows Vista as an operating system - I have installed iTunes latest version 7.4 but still the PC does not recognize my iPod or doesn't find the hardware - can anyone help?

Have you had a chance to look at these troubleshooting pages? They may be of some help:
iPod missing in My Computer and in iTunes
iPod is not recognized properly by computer when USB drivers are not installed properly or are out of date
If you are using a laptop, this page might help: iPod not recognized when connected to Windows laptop over USB

ITunes Not Recognizing my iPod Touch after Upgrading from Tiger to Leopard

After upgrading from Tiger (10.4.x) to Leopard (10.5.0=>10.5.6), my iPod Touch is no longer recognized by iTunes 8.0.2. The iPod Touch no longer appears in iTunes' "source list" (left side pane in iTunes' GUI).
Immediately prior to that upgrade, my iPod Touch was working great with Tiger (10.4.x). iTunes 8.0.2 recognized it (listed it in sources) and always synchronized with it successfully.''
My iPod Touch is also not shown in the Finder. However, it does show up as recognized in iPhoto.
Any ideas on how to get the iPod recognized again in iTunes under Leopard?

Thanks to a posting by Jim in a different Apple Discussions (forum), my problem is now resolved. Read on for the details.
iPods & Finder. Some other postings incorrectly lead me to believe that the iPod would show up in the "Finder". Jim's posting set me straight on this.
iTunes Not Recognizing iPod Touch. Prior to Jim's posting, I had already read the article that Jim referenced (to remove and reinstall the Apple Mobile Device Service per article "http://support.apple.com/kb/HT1747").
Prior to Jim's posting, I had also read other articles in various "Apple Discussions" (forums) that suggested this recognition problem could be resolved by uninstalling/re-installing iTunes 8.0.2. Some implied that you could just re-install iTunes 8.0.2 right over the currently installed one without bothering to uninstall it.
Based on those postings, I "gambled" last night and simply downloaded and re-installed iTunes 8.0.2 (without uninstalling it first). I noticed during the installation that the Apple Mobile Device agent was also re-installed. Well, my gamble paid off! After the installation (and a reboot?), iTunes onces again RECOGNIZED my iPod Touch.

Leopard not recognizing some hardware

Similar Messages

Maybe you are looking for