Leopard prompts for 802.1X username and password instead of WEP password

hey!
so i got leopard on friday and i haven't been able to connect to my wireless properly since.
i have an old D-Link DI-624 (Revision B) router that i have protected with a WEP password. in tiger i never had any problems with this, but now instead of prompting me for a WEP password when i try to connect, leopard prompts me to enter username and password and below there is a dropdown entitled 802.1X with options automatic and TTLS-PAP.
if i try to enter my WEP password as the password, the connection fails.
i know that the issue is not the router because my girlfriend is still running tiger and has no issues.
i ran that login and keychain update and that didn't help. i also deleted that old airport driver file that other people had mentioned for other airport issues and that didn't do anything either.
any ideas??
thanks!!

I have this exact same problem.

Similar Messages

Access document in Library is being asking for an Infopath username and password

Trying to get access to files in the library. And the user is having permissions but when he clicked the file in the library he is being ask for an Infopath username and password.
A pop dialog box showing like
    "Form will open in Offline Mode"
                                  You are currently working offline.
To try to connect to data sources when the form is opened, click "Try to Connect". To use previously stored data......
Can somebody reply on this please..

Hi,
According to your post, my understanding is that access document in Library is being asking for an Infopath username and password.
Usually this error when the form is not connected to any of the data sources successfully. Please verify all the data connections are available or not.
I recommend to enable the options for Infopath Form Services to ensure that InfoPath 2010 is in online mode.
In addition, you can add your SharePoint server’s FQDN to your Trusted Sites or Intranet Sites zone and modify your registry settings for the WebClient service.
For more information, you can refer to:
Form will Open in Offline mode? Please help
How to ensure that Infopath 2010 is in online mode?
SharePoint Keeps Prompting for Credentials
Best Regards,
Linda Li
Linda Li
TechNet Community Support

Checkin for a specific username and password

i have an html page where i enter username and password..now if i want that for a specific username and password only the next page say next.html is displayed otherwise the same page is diaplayed sayin that the usrename and password is to be reenterd...how can i do this servlets..also do tell me where to store the username and password

I am sorry, I lost some code in cut and pasting it
import java.io.*;
import java.sql.*;
import javax.servlet.*;
import javax.servlet.http.*;
public class LoginServlet extends HttpServlet{
        private Connection con;
        private PreparedStatement pstmt;
        private Statement stmt;
        private ResultSet rs;
        private String pass = "";
        private String login,password,done;
        private HttpSession session;
        public void doPost(HttpServletRequest request,HttpServletResponse response)
        throws ServletException, IOException{
                login = ""+request.getParameter("login");
                password = ""+request.getParameter("password");
                done = ""+request.getParameter("done");
                session = request.getSession(true);
                PrintWriter out = response.getWriter();
                try{
                        Class.forName("oracle.jdbc.driver.OracleDriver");
                }catch(Exception e){
                        out.println(e.getMessage());
                try{
                        con = DriverManager.getConnection("jdbc:oracle:thin:scott/[email protected]:1521:csapw");
                        if(!(password.equals("")&&login.equals(""))){
                                pstmt = con.prepareStatement("select password from logon where login = ?");
                                pstmt.setString(1,login);
                                rs = pstmt.executeQuery();
                                                     pass = "";
                                while(rs.next()){
                                        pass = rs.getString(1);
                                if(pass.equals(password)){
                                        session.setAttribute("login",login);
                                        if(done.equals("null")){
                                                done = "";
                                                pass = "";
                                                response.sendRedirect("/ksenji/quiz2/shoponline.jsp");
                                        }else{
                                                response.sendRedirect(done.substring(5));
                                else{
                                        response.sendRedirect("/ksenji/quiz2/login.jsp?"+done);
                        else{
                                response.sendRedirect("/ksenji/quiz2/login.jsp?"+done);
                }catch(SQLException ex){
                        out.println(ex.getMessage());

Write code for authentication of username and password using struts

write code for authentication of username and password using session using struts with jdbc connection..

write code for authentication of username and
password using session using struts with jdbc
connection..and please, allow me to spoon feed you!

My computer is authorized, but when I try to open a recently downloaded audio file I get asked for my "Audible username and password" and my AppleID and password do not work

My computer is authorized, but when I try to open a recently downloaded audio file I get asked for my "Audible username and password" and my AppleID and password do not work.

thats because audible isnt apple provided, its a third party app/website so you'll have to get it from them

Firefox any version Mac, has a bug were it does not see or ask for the proxy username and password. This happens if you use a virtual tagged interface.

Firefox any version Mac, has a bug were it does not see or ask for the proxy username and password. This happens if you use a virtual tagged interface. A recent network University policy change. The only way to fix this, is if you use a manual proxy configuration in Firefox. So all 100 + uni iMac's can only use Safari as I would need to do a profile push to all 300 students and I am unsure what file carries the proxy information.

Firefox any version Mac, has a bug were it does not see or ask for the proxy username and password. This happens if you use a virtual tagged interface. A recent network University policy change. The only way to fix this, is if you use a manual proxy configuration in Firefox. So all 100 + uni iMac's can only use Safari as I would need to do a profile push to all 300 students and I am unsure what file carries the proxy information.

Why I receive started 2 hours the message that I must put my password on Iclod for my apple id and when I put the password I receive the message that the paswor is not god!What can I make in this case?Please help me

why I receive started 2 hours the message that I must put my password on Iclod for my apple id and when I put the password I receive the message that the password is not god!What can I make in this case?Please help me

Hi it sounds like a scam delete Email
bsydd uk

Always prompted for "802.1X Authentication" user name and password

Hi,
Just had the logic board replaced in my Macbook Pro, but that's an different story...
The most recent side effect of this is that I am always prompted for my password/user name when I connect to the wireless network at work.
Obviously, I enter the name and password. However, I didn't used to have to do this. In other words, it's not being saved.
Any suggestions on what I can do so it's saved again?
The Network preference panel reports:
Authenticated via PEAP (Inner Protocol:GTC)
The 802.1X pane shows I have 1 'User Profiles':
WPA:<network>
Which has:
my name
a password
Authentications enabled:
PEAP
TTLS
EAP-FAST

Hi,
it might have something to do with your logic board exchange. Your MAC address (Media Access Control, Ethernet-ID, AirPort-ID, Hardware Address or what you want to call it) has changed. Every network interface has a distinct address which looks like that: 01:23:45:ab:cd:ef
I would ask your company's admin first if it has something to with you having a new MAC address.
Alternatively you could try to remove the wlan from Sys Prefs/Network/AirPort/Options/Preferred Networks. Also remove any saved passwords of this network from your keychain and then try adding it again with the remember-checkbox on.
Björn

I cant getmy new IPAD to connect to the wifi at my apartment. how do i get a prompt to enter a username and password?

I just purchased a new IPAD (16GB + 4G cell) I am trying to get it to connect to the wifi hotspot at the apartment where I live. The wifi signal requires a username and password. How do I get the IPAD to prompt for the username and password? Any help is appreciated

Settings>General>Reset>Reset Network Settings

Web reports prompts me to input username and password in bw

Hi all.
When I access web reports from bw.
It will open a IE, then go to one url ( which is located in ITS ), and IE prompts me to input a valid username and password.
Its very strange, because I have already logged on that BW.
Is it possible to avoid this prompt ?

Gu,
Can you give us the URLs that you are using , is it that the URLs are different ?
The URL is usually
http://<yourserver>:port/sap......
assuming that the URLs are
URL 1 ( which is currently opening in IE )
http://<yourserver1>:port/sap......
URL 2 ( for which the login is being asked for)
http://<yourserver2>:port/sap......
if yourserver1 and yourserver2 are different , then a logon is required.
Hope it helps..
Arun
Assign points if useful

Using CreateObject for Webservice with username and password

When using createObject() to call a web service how do I pass
in the user name and password required by the service?
If I do a cfdump on the webservice object I see it has
setUserName() and setPassword() methods but they don't seem to be
working.
I also see there are properties named "USERNAME_PROPERTY" and
"PASSWORD_PROPERTY" but I can't seem to modify them in code. I
suppose they are protected.
example:
ws = createObject("webservice", "
http://url.to/wsdl.xml",
"serviceport");
ws.setUserName("myawesomeusername");
ws.setPassword("myawesomepassword");
myReturn = ws.serviceMethodCall("bla");

quote:
Originally posted by:
MACRStockHolder
For anyone that encounters the same issue/question;
apparently you can't apply a username/password to the object call
like you can when using <cfinvoke> to make a web service
call.
FYI Adobe: this is VERY limiting, I have to use a web service
that uses in/out parameters which to the best of my knowledge
requires the use of createObject() but at the same time the web
service requires a username and password which I can only do with
<cfinvoke>. Looks like I will be writing a compiled custom
tag just for a workaround.
According to the docs you can provide a username and password
by passing a struct containing these items to CreateObject
http://livedocs.adobe.com/coldfusion/8/htmldocs/help.html?content=functions_c-d_18.html#45 14398
If you like cfinvoke use it. You can get return values by
using the returnVariable argument. I would assume mutliple output
parameters would be returned in a struct.
http://livedocs.adobe.com/coldfusion/8/htmldocs/help.html?content=Tags_i_10.html#4001127

I have changed my username and password but the apps are still asking for my old username and password. How do I change that

I have changed my username and password for my apple account but the apps previously linked to it are still asking for the old info. And I don,t know it so that's why I updated it

Apps are permanently tied to the ID and password used to purchase them. If you do not remember that information, you cannot update them. If you ned these apps, you will have to repurchase them under your new ID.

HT4623 I can't update my apps on my iPad because it keeps asking for an outdated username and password which is different to my current one

I can't update my apps in my iPad because it asks me to sign in to an outdated id which is different to my current Apple ID

Apps are always tied to the ID that was used to purchase them. If you bought the apps with old username and password, you have to continue to use them to update the apps.
If you changed the username because you got a new email address, sign out of your old ID in Settings>iTunes and App Store. Tap the old ID and sign out then sign in with the new/changed ID.

Creative Cloud is asking for proxy server username and password - what is this?

how do I find out the proxy server username and password

Krisw30568123 do you utilize an authenticating proxy server? If so then you will need to enter the proper credentials to access the Internet.

For safety blocked icloud and asks to reset your password.

hello!
I live in Israel. there is no ofistsialnogo office.
I have a problem with my iphone 5c, after flashing for security reasons he blocked icloud and asks to reset your password.
Where can I go with this issue?
I have all the documents on the phone and in case of need can all send.
thank you for your help.
please give mail helper.
iphone 5c emei 35 854 605 626 628 1

Как сбросить идентификатора Apple пароль.
Перейти к iforgot.apple.com и введите свой Apple ID, затем нажмите «Далее» .
Проверьте дату своего рождения , то нажмите кнопку " Далее" .
Вы сможете выбрать один из двух методов для сброса пароля, либо E -Mail аутентификации или секретный вопрос и ответы.
Если ни один из методов работы , а затем перейти к https://getsupport.apple.com
(Если вы видите сообщение " Там нет товаров , зарегистрированные на этом идентификатор Apple , просто нажмите на кнопку" Показать все продукты и услуги »)
Выберите "Другие продукты & услуги» , затем « Apple ID .
Новая страница откроется.
Выберите « Другие Apple ID темы ', то ' потеряли или забыли идентификатора Apple пароль .
Нажмите на синюю кнопку " Продолжить" .
Выберите контактную вариант, который соответствует вашим потребностям.
Kak sbrosit' identifikatora Apple parol'.
Pereyti k iforgot.apple.com i vvedite svoy Apple ID, zatem nazhmite «Daleye» .
Prover'te datu svoyego rozhdeniya , to nazhmite knopku " Daleye" .
Vy smozhete vybrat' odin iz dvukh metodov dlya sbrosa parolya, libo E -Mail autentifikatsii ili sekretnyy vopros i otvety.
Yesli ni odin iz metodov raboty , a zatem pereyti k https://getsupport.apple.com
(Yesli vy vidite soobshcheniye " Tam net tovarov , zaregistrirovannyye na etom identifikator Apple , prosto nazhmite na knopku" Pokazat' vse produkty i uslugi »)
Vyberite "Drugiye produkty & uslugi» , zatem « Apple ID .
Novaya stranitsa otkroyetsya.
Vyberite « Drugiye Apple ID temy ', to ' poteryali ili zabyli identifikatora Apple parol' .
Nazhmite na sinyuyu knopku " Prodolzhit'" .
Vyberite kontaktnuyu variant, kotoryy sootvetstvuyet vashim potrebnostyam.
How to reset your Apple ID password.
Go to iforgot.apple.com and type in your Apple ID, then click 'Next'.
Verify your date of birth, then click 'Next'.
You'll be able to choose one of two methods to reset your password, either E-Mail Authentication or Answer Security Questions.
If neither method works, then go to https://getsupport.apple.com
(If you see a message that says 'There are no products registered to this Apple ID, simply click on 'See all products and services')
Choose 'More Products & Services', then 'Apple ID'.
A new page will open.
Choose 'Other Apple ID Topics', then 'Lost or forgotten Apple ID password'.
Click the blue 'Continue' button.
Select the contact option that suits your needs best.

Leopard prompts for 802.1X username and password instead of WEP password

Similar Messages

Maybe you are looking for