Leopard Snow - Update: Install button doesn't work

Software update and 10.6.1 pack: the Install button is enabled, I click it but nothing happens...
I'd appreciate some help.
Thanks,
Mauricio (using US language installation option)

If you are using a custom keyboard, then set your keyboard to the standard US layout. Then, delete this file: /users/username/Library/Preferences/ByHost/com.apple.HIToolbox. Next, log out and back in. Then try installing whatever you have been having problems with.

Similar Messages

  • IOS 5.1 Update, Home Button Doesn't Work.

    Ever since I installed the iOS 5.1 update on my iPhone 4, the home button does not work at all! I've tried every trouble shooting solution I could find. I've Restarted, I can't hard reset because the home button doesn't work, I've restored from back up, I've restored as new, I've vacuumed out and gently used a tooth brush in the port below the home button in attempt to remove any dust. I've tried opening a factory installed app such as Maps, Safari, Stocks etc and held the top button until the "Slide to power off" showed and then held down the home button until it went to home screen except it didn't go to the home screen at all the "slide to power off" disappeared after a while. I have extremely intermittent response with the Home Button. If i press it continuously it will work after 27 presses one time or 9 presses another but never when I try to do a hard reset and 9.999 times out of 10 it doesn't work. I am so frustrated! I didn't get it wet and it stopped working immediately after the software update. HELP!

    I talked to Apple today and was told that it's a "hardware issue" and they will not fix it. I will have to pay 169.00 to have it repaired because it is no longer covered. He told me that "the software update triggered a hardware problem" and that they haven't heard of this issue before either and this was after he went and "spoke with a senior service advisor". The thing is that if THEIR software update triggered the "hardware problem" meaning that if I hadn't updated at all my phone would be in perfect working order right now then HOW IS THAT NOT A SOFTWARE ISSUE?! I am beyond livid. I cannot continue using my phone with assistive touch, NOTHING else works and I know this isn't the first time they've heard of it because how can so many people be having this problem and Apple NOT be aware of it?!  My family has bought three MacBooks, three MacBook Pros, one iPad, two iPad 2s, seven iPhone 3s, one iPhone 3GS, five iPhone 4s, two iPhone 4S, four Apple TVs, one Time Capsule and COUNTLESS versions of iPods and have never had an issue having any of them repaired and only four of those products had to be and it was a fast and hassle free...then again they all were covered still at the time of repair...
    How do you restore to a previous firmware? I don't want a new phone...I want MY phone to work...the one that worked perfectly before their update....this is beyond ridiculous...I wish apple would take a look at their own support communities and see that this ISN'T our problem...it's a problem created by THEM.

  • AppStore install button doesn't work on iPad Air 2

    Dear Apple fans,
    I'm suddenly having a weird issue with my 1 week old Air 2 (me and my dad got the same model, same store, same date): I can't download apps from the store anymore.
    Whenever I click any random free app the button changes to ''install'' as it normally would. When I tap that I have to enter my code or use my finger, as is normal. But when that's over the normal download circle & pauze button do NOT appear; instead it reverts back to ''Free''.
    This happens with every app, paid apps as well. It doesn't start the download, it doesn't give an error message. To make things worse: my dad has 0 issues on his device.
    I CAN, however, re-download previously installed apps from the cloud just fine from the 'purchased' tab. Internet works fine. No other issues what-so-ever. Love the device.
    Already tried:
    Rebooting.
    Re-logging.
    Resetting (home + power button reset)
    Combination of the above.
    There are no apps waiting to be updated or downloaded and everything is up to date.
    This is really annoying me since the device is otherwise perfect but I can't really be bothered to do a full firmware re-install... I hate doing stuff like that: I've got a Windows PC to annoy me with things such as that haha.
    Any ideas? Thanks in advance!
    -Kevin

    Hi Kevin ...
    Tap Settings > General > Reset > Reset All Settings
    Then try downloading an app again.
    No data is lost due to a reset.

  • Adobe Updater Preferences Button Doesn't Work!

    I'm trying to disable the annoying Adobe Updater (which pops up only to show no updates are available).  All the instructions I've found say to click on the Preferences button, but when I do nothing happens.  The "Remind Me Later" button does work.  When I just close the window, I get a box that says:
    "The updating process is not complete.  Quitting now will cancel the update in progress.  Click Continue to continue the updating process.  If you would like to resume the updating process at a later time, click Quit."
    No updates are being installed.  Along with the Continue and Quit buttons, there is also a checkbox to select "Resume the download when the computer restarts."
    I uncheck that box and click on Quit, but the Updater still pops up ocassionally and when I reboot.
    Any help much appreciated!!!

    I just fixed this problem on an old PC of mine. The problem looks like it is caused by the Adobe Updater stuffing up when you do actually need an update. To fix:
    1. Close any Adobe applications
    2. Open Task Manager (you may need to check the "Show processes from all users")
    3. Highlight and hit End Process for anything called AdobeUpdater.exe and AdobeARM.exe, confirm you definitely want to terminate the process.
    4. Open an Adobe program
    5. Check for updates from within the program.
    Once I did this it downloaded and installed the update fine. The next time I rebooted and got the correct screen where I can set preferences to only check once a week and it all seems to work fine now.
    (I only use Adobe Reader but I'm guessing as the symptoms are exactly the same the answer is likely to be exactly the same, maybe if you have multiple apps installed you may need to do the check from every app until you find the one with the stuck update).
    Hope this helps others as I've not seen anyone post a fix even though this has been around since at least 2009!

  • After updates solo button doesn't work with comp track, anyone have the same problem?

    Hello everyone, after upadtes solo button is not soloing a comp track,
    is there someone that knows to fix this bug?
    it's possible that now logic consider a comp track as muted, and then doesn't solo the comp track ?
    thanks everyone

    Looks like there may be a solution on Itunes 10.5 64bit will not install on Win7. I am going to try that.

  • Ran update this morning.  Now power button doesn't work and soft boot brings to the battery/cord icon as if there's no power.  Can't get into anything.  Any help on this?

    Update for Windows was run this morning---it actually made me run it twice.  I was initially able to use my phone but now I get nothing but the battery/power cord symbol.  The power button doesn't work at all.  I have tried soft boot of the down volume and power button.  Seems to reboot but same screen appears.  I cannot access anything on the phone.  Is there any help on this? 

        Hey there, javadan! Thanks for letting us know about the problem with your software upgrade. I'm very sorry for the issues you're having. Based on the two attempts to process, I would have to say there was a problem with both install attempts. You may need to process a factory reset. Which model device do you have?
    DionM_VZW
    Follow us on Twitter www.twitter.com/vzwsupport

  • Help. My home button doesn't work. I've to press it several times to get it to function. The phone has 4 months. I've already update software, restarted and calibrated it. I was thinking to go to the service. Has 1 year hardware warranty. Suggestions?

    Help. My home button doesn't work. I've to press it several times to get it to function. The phone has 4 months. I've already update software, restarted and calibrated it. I was thinking to go to the service. Has 1 year hardware warranty. Suggestions?

    There's another thread with similar problems.
    https://discussions.apple.com/thread/2595841?start=510&tstart=0
    I wouldn't suggest it though, since it may void your warrantee. Apple will replace it if you bring it in. The genius bar guys aren't too bright, well most of them. But they'll go through the usual diagnosis steps then issue you a replacement if they have them in stock.
    I have to admit, Apple has one of the best replacement services that I've ever experience. If you're familiar with costco, the return/exchange process is very quick and painless.

  • I'm installing Creative Cloud on a MAC OSX 10.6.8   I have the 'installing window' displaying that it is about 95% complete but hasn't moved in 30 minutes; cannot quit it either...cancel button doesn't work, can't esc. What's up?

    I'm installing Creative Cloud on a MAC OSX 10.6.8   I have the 'installing window' displaying that it is about 95% complete but hasn't moved in 30 minutes; cannot quit it either...cancel button doesn't work, can't esc. What's up?

    I'm installing Creative Cloud on a MAC OSX 10.6.8
    You'll have to upgrade your operating system first.
    Most, if not all, Cloud apps require at least OS X 10.7.

  • Iphone 5 update to IOS7.0.2: on/off button doesn't work properly

    Since I updated my iphone5 to IOS 7.0.2 the on/off button doesn't work properly. When i try to restart it, it takes pictures from desktop and fails constantly

    Hey rcaudillo,
    Thanks for the question. I understand you are experiencing issues with your Sleep/Wake button. The following article outlines some troubleshooting steps:
    iPhone: Hardware troubleshooting
    http://support.apple.com/kb/TS2802
    Sleep/Wake button will not lock or unlock iPhone
    1. To lock the phone, press the Sleep/Wake button. Note: By default, if you don't touch the screen for a minute, iPhone locks automatically.
    2. To unlock iPhone, press the Home button or the Sleep/Wake button, then slide the slider.
    3. If either of the above steps don't work, try turning iPhone off and then on again.
    4. If the iPhone will not power off, reset it.
    5. Try to lock or unlock the phone.
    If you continue to have issues, we may need to isolate the issue further to determine if it is hardware related. The best way to do this would be to restore your iPhone as new:
    iTunes: Restoring iOS software
    http://support.apple.com/kb/HT1414
    Thanks,
    Matt M.

  • HT201304 I can't install any app from apple store. The install button is not working now. Before it was working perfectly had installed many app and I had purchased many app from i-store

    I can't install any app from apple store. The install button is not working now. Before it was working perfectly had installed many app and I had purchased many app from i-store

    If you installed Leopard that is why you can't install Mt Lion. The system Must be running Snow Leopard 10.6.8 to upgrade to Lion or Mt Lion.
    If you only erased the Macintosh HD partition then you left the Mt Lion Recovery HD partition in tact on that system. At startup hold down the Command+r keys to boot to the Recovery HD Partition. From there erase the Macintosh HD partition and then select Reinstall Mac OS X. It should then download Mt Lion and ask you for the Apple ID that was used to purchase Mt Lion.
    The Reason Snow Leopard might not be installing is because of the Recovery HD partition. To get rid of that you must First Re-Partition the drive As One Partition. Then install Leopard then SL (Or Snow Leopard from the start) and then update it to 10.6.8. Once that is done you should be able to log on to the Mac App Store and Re-Download Mt Lion.

  • My IPod touch 4g screen is FROZEN turned white , with green , white & yellow lines .  No connect to itunes , OnOff button & home button DOESN`T WORK? -

    My IPod touch 4g screen is FROZEN turned white , with green , white & yellow lines .
    No connect to itunes , OnOff button & home button DOESN`T WORK? -
    While installing an update for my IPod touch 4g ( that I`ve had for around over a year )
    and turned it off while it was " updating " . I turned it on a while after ,
    and it was on the apple symbol and then suddenly went to the white screen with the green ,
    white and yellow lines from top to bottom . I`ve waited around 2 and a half hours for it to go back .
    I`ve tried to connect it to itunes , but won`t connect nor effect the ipod screen .
    I`ve also tried the on and off button held and holding the home button as well .
    Nothing is working and I`m begging to worry .  it's my baby sister's ipod and she's crying already she doesn't know
    what to do....

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar

  • Device Manager ! FN button doesn't work

    Portege R835-P56X Bios updated to Version 3 The laptop came with 64 Bit but I did a clean install with Windows 7 32 Bit because many of my programs and games didn't work with 64 Bit.
    I can't install Toshiba Value Added Package,Toshiba PC Health Monitor and Toshiba eco Utility because they are 64 Bit.Pressing the FN button doesn't work,it does nothing at all using 32 Bit.With 64 Bit it worked fine with screen icons coming up when I pressed it.I wonder if the FN button only work in 64 Bit or maybe Toshiba Value Added Package contains the FN button driver?If anyone knows where to get Toshiba Value Added Package 32 Bit that may fix this problem,please let me know thanks.
    I have a problem in Device Manager where it's showing ! Other Devices PCI Simple Communications Controller.I took a screen shot of Device Manager with 64 Bit installed just incase I ran into problems.Looking at the 2 Device managers side by side 32 vs 64 it looks like Microsoft Virtual WiFi Miniport Adapter is missing from the 32 Bit Device Manager.
    I'm assuming this is Intel Wireless Display but I'm not 100% sure.Because every time I run Intel Wireless Display I get this error message.Unable to load the Intel My WiFi Technology Dll file
    Anyway there is no Intel Display driver for 32 Bit so I had to download that from Intel website.There is however Intel Wireless Display for 32 Bit which I have installed but the ! in device manager remains.So I uninstalled Intel Wireless Display and downloaded the Wireless Display driver 32 Bit from Intel website hoping that might fix the problem.But the ! in device manager remains.
    I have also tried windows update but it can't find any driver for Hardware.I have added 2 screen shots in Attachments
    Attachments:
    2.jpg ‏39 KB
    1.jpg ‏167 KB

    Well after alot of searching on Google I have finally found out what this PCI Simple Communications Controller is.
    It's the Intel Management Engine Interface and lucky for me there is a 32 Bit driver.Now I have no more ! in Device Manager and I have uploaded an updated screen shot.
    But now there are 3 questions.
    1 What happened to the Microsoft Virtual WiFi Miniport Adapter?It was listed twice in 64 Bit but doesn't show up in 32 Bit Device Manager.
    2 Why do I still get the error message when starting Intel Wireless Display?Unable to load the Intel My WiFi Technology Dll file even though I have found the driver for ! in Device Manager
    3 Why doesn't the FN button work?It worked fine in 64 Bit but in 32 Bit it does absolutely nothing.The same goes for the touchpad on/off button which worked fine before in 64 Bit.But now with 32 Bit presing it doesn't turn the touchpad on or off,It does nothing.I hope Toshiba releases drivers for both of these features.
    Attachments:
    Updated Screenshot.jpg ‏49 KB

  • E63 Contacts button doesn't work

    Just updated my E63 firmware to 200.21.012 (18-06-2009; RM-450). Now 'Contacts' button doesn't work anymore. When I press 'Contacts' button, screen blinks, nothing else happens. Cannot view my Contact List by any other way either. However I can access the Contact List when trying to compose a new SMS/Email. Had no luck with 3 Australia and Nokia Australia Customer Support. Any help to fix this issue is great appreciate.

    umagiriya wrote:
    Just updated my E63 firmware to 200.21.012 (18-06-2009; RM-450). Now 'Contacts' button doesn't work anymore. When I press 'Contacts' button, screen blinks, nothing else happens. Cannot view my Contact List by any other way either. However I can access the Contact List when trying to compose a new SMS/Email. Had no luck with 3 Australia and Nokia Australia Customer Support. Any help to fix this issue is great appreciate.
    The best option is to perform a reset 1)  *#7780# 12345 restore factory settings, keep data 2)  *#7370# 12345 reformat, lose all data. If you replace the backup you made, place all, except the settings and install "Conversation" from Nokia Beta Labs.
    ‡Thank you for hitting the Blue/Green Star button‡
    N8-00 RM 596 V:111.030.0609; E71-1(05) RM 346 V: 500.21.009

  • [TP Yoga S1] Windows 10 - Auto-Rotate button doesn't work in landscape mode.

    I just updated to Win 10 on Yoga S1. A strange problem occured regarding auto rotate. When the laptop is in landscape mode (normal mode), the physical "Enable/Disable Autorotate" button doesn't work, and the Autorotate button in the action center button is disabled. However, when I physically rotate my laptop, the screen rotates, and suddenly, both buttons now are active. This defeats the purpose of the button since it can't lock rotation when the laptop is in landscape mode. Anyone having this problem too?

    Still have this problem as well. I've installed every windows 10 update I could find.BiosSystem Inferface DriverPower ManagementLenovo System Extension/ButtonSystem Update 5
    Rotation button still no work. 

  • "Submit to SAP" Button doesn't work

    Hi to all,
    I'm trying to develop an interactive form using NW04 SP22. My problem is that the submit to sap button doesn't work. I think I have not properly installed active component framework (ACF) on my client pc but I can't find the right ACF to install. I found a note 766191 in which I can download ACF for SP22 but  the link [url]https://sapmats-de.sap-ag.de/download/download.cgi?id=OZOHD0204MQQADJPWOZSGFDNCP39PBJ6TFA2CANJKUPYIGJF16[url]  seems not to work. Where can I find it?
    Thank you very mich,
    Enrico

    Hi Enrico,
    You can download it from the below link:
    http://www.esnips.com/web/arafatfNewFolder/
    Let me know once you are done so that I will delete the link.
    Regards,
    Arafat

Maybe you are looking for

  • Printing daily tasks in the calendar view

    How can I print the To Do's /Tasks in the side bar as part of my daily/day view in iCal. I want to print out the day. And generally that includes my to do's for the day, even if there is not date attached (pick up eggs, etc ). Yes, some how, miraculo

  • Keynote slides are not displaying correctly

    Since installing Keynote, all of my slides are all washed out, most slides I can't even see the text. Even when a create a new presentation using the templates, the templates are bad as well. I'm afraid I'm going to have to reinstall because I need t

  • Vista on macbook pro no wireless connection

    i have install vista 32 ultimate on macbook pro the versionbefore the unibody but there is no signal coming from the router i have all the updates from apple :S any help please

  • Battery drains quickly!

    Does it take a couple of charches to reach full capacity??? Prof.

  • Songs will not play to the end on only one of my computers

    Some of the songs in my library will not play to the end.  However, I have come to realize this is only happening on one of my computers.  The computer I sync with.  The same songs will play on my laptop and iPad.  ??? What gives?