Leopard Suddenly Running Slowly and Need Help
Hi there. I have been a Mac user (and Mac support person at work) for many years. I've recently run into a problem that I'd like some help with.
I have an iMac that I bought 4 months ago, and I upgraded to Leopard and then put 10.5.1 update onto it.
Nothing of any note has occurred with my computer in the last 2 days, however, 2 days ago, every application started running very slowly. I click on the HD icon, and the spinning color cursor spins for 30-40 seconds before the HD opens. I click in the bottom tray to open Safari, and it takes 40-50 seconds for it to open (as the color cursor spins away). I reboot, and the iMac comes up with the front white/gray screen and holds with the spinning circle for anywhere from 20 to 45 MINUTES before going to the desktop. I have reinstalled Leopard (telling it to Archive and Install). Same problems abound. I ran Tech Tool, and it says everything is fine. I started up from the Leopard install DVD and ran Disk Utility. Checking the progress log, it tells me that the HD cannot be unmounted (meantime, I've booted from the DVD and nothing else is attached or running). When I select "Repair Disk" in Disk Utility, I get an immediate message that the HD cannot be unmounted.
What does this sound like? A hard drive failure? Will completely erasing my HD and installing Leopard from scratch (as opposed to installing Tiger and upgrading to Leopard) help? Or am I merely band-aiding the problem and need to take it in for qualified Apple Tech support?
I'd appreciate any help.
Thanks.
Hi and welcome to the Apple forums.
I would run DU and check the disk and the permissions.
If necessary use DiskWarrior
You might also zap the PRAM and NV-RAM.
Check the console log, other logs and of course the activity monitor.
If it is noticeably slower, what is causing it should be rather obvious.
It could be a failing drive that is being re-read multiple times to extract data from a bad block/sector.
Be sure you have everything backed up. !!!
Message was edited by: nerowolfe
Similar Messages
-
My leopard is running slowly. How can I defrag or tidy things up please?
My leopard is running slowly. How can I defrag or tidy things up please?
You do not really need to defragment your drive. And, see:
Kappy's Personal Suggestions for OS X Maintenance
For disk repairs use Disk Utility. For situations DU cannot handle the best third-party utilities are: Disk Warrior; DW only fixes problems with the disk directory, but most disk problems are caused by directory corruption; Disk Warrior 4.x is now Intel Mac compatible. Drive Genius provides additional tools not found in Disk Warrior. Versions 1.5.1 and later are Intel Mac compatible.
OS X performs certain maintenance functions that are scheduled to occur on a daily, weekly, or monthly period. The maintenance scripts run in the early AM only if the computer is turned on 24/7 (no sleep.) If this isn't the case, then an excellent solution is to download and install a shareware utility such as Macaroni, JAW PseudoAnacron, or Anacron that will automate the maintenance activity regardless of whether the computer is turned off or asleep. Dependence upon third-party utilities to run the periodic maintenance scripts was significantly reduced since Tiger. These utilities have limited or no functionality with Snow Leopard or Lion and should not be installed.
OS X automatically defragments files less than 20 MBs in size, so unless you have a disk full of very large files there's little need for defragmenting the hard drive. As for virus protection there are few if any such animals affecting OS X. You can protect the computer easily using the freeware Open Source virus protection software ClamXAV. Personally I would avoid most commercial anti-virus software because of their potential for causing problems. For more about malware see Macintosh Virus Guide.
I would also recommend downloading a utility such as TinkerTool System, OnyX 2.4.3, or Cocktail 5.1.1 that you can use for periodic maintenance such as removing old log files and archives, clearing caches, etc.
For emergency repairs install the freeware utility Applejack. If you cannot start up in OS X, you may be able to start in single-user mode from which you can run Applejack to do a whole set of repair and maintenance routines from the command line. Note that AppleJack 1.5 is required for Leopard. AppleJack 1.6 is compatible with Snow Leopard. There is no confirmation that this version also works with Lion.
When you install any new system software or updates be sure to repair the hard drive and permissions beforehand. I also recommend booting into safe mode before doing system software updates.
Get an external Firewire drive at least equal in size to the internal hard drive and make (and maintain) a bootable clone/backup. You can make a bootable clone using the Restore option of Disk Utility. You can also make and maintain clones with good backup software. My personal recommendations are (order is not significant):
Carbon Copy Cloner
Data Backup
Deja Vu
SuperDuper!
SyncTwoFolders
Synk Pro
Synk Standard
Tri-Backup
Visit The XLab FAQs and read the FAQs on maintenance, optimization, virus protection, and backup and restore.
Additional suggestions will be found in Mac Maintenance Quick Assist.
Referenced software can be found at CNet Downloads or MacUpdate.
Be sure you have an adequate amount of RAM installed for the number of applications you run concurrently. Be sure you leave 10 GBs or 10% of the hard drive's capacity as free space, whichever is greater.
Be sure you have enough RAM to handle the applications you run concurrently. Nothing will slow things down faster than running low on memory. -
Mac suddenly running slow and freezing frequently after software update
Hi, first post. I have recently wiped my hard drive after my new macbook pro started crashing frequently and suddenly running slow, however, it all seemed fine for a few days until I ran the software update, and after failing because it was unable to "expand", everything started running slowly and freezing left right and center.
This is really grinding my gears, and I have been looking for solutions online for ages now, can anyone here help?coove wrote:
I'm sure that my laptop isn't that broken since it is quite new (september).
You are still under warranty. Call Apple Care and get a case number.
#1 - You have 14 days from the date of purchase to return your computer with no questions asked.
#2 - You have 90 days of FREE phone tech support.
#3 - You have the standard one year Apple warranty.
#4 - If you've purchased an AppleCare Protection Plan, your warranty last for 3 years. You can obtain AppleCare anytime up to the first year of the purchase of your computer.
Take FULL advantage of your warranty. Posting on a message board should be done as a last resort and if you are out of warranty or Apple Care has expired. -
Macbook Pro 2009 runs slowly and freezes. Can someone look at this Etrecheck report and tell me what's wrong?
Hardware Information:
MacBook Pro (13-inch, Mid 2009)
MacBook Pro - model: MacBookPro5,5
1 2.26 GHz Intel Core 2 Duo CPU: 2 cores
4 GB RAM
Video Information:
NVIDIA GeForce 9400M - VRAM: 256 MB
System Software:
OS X 10.9.1 (13B42) - Uptime: 6 days 16:17:8
Disk Information:
FUJITSU MJA2160BH FFS G1 disk0 : (160.04 GB)
EFI (disk0s1) <not mounted>: 209.7 MB
MacBook HD (disk0s2) /: 159.18 GB (29.38 GB free)
Recovery HD (disk0s3) <not mounted>: 650 MB
HL-DT-ST DVDRW GS23N
USB Information:
Apple Inc. Built-in iSight
Apple Internal Memory Card Reader
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Computer, Inc. IR Receiver
Apple Inc. BRCM2046 Hub
Apple Inc. Bluetooth USB Host Controller
FireWire Information:
Thunderbolt Information:
Kernel Extensions:
com.spsys.driver.IOKitDriver (1.0.0d1)
com.parallels.kext.usbconnect (8.0 18615.948847)
com.parallels.kext.hypervisor (8.0 18615.948847)
com.parallels.kext.hidhook (8.0 18615.948847)
com.parallels.kext.netbridge (8.0 18615.948847)
com.parallels.kext.vnic (8.0 18615.948847)
com.parallels.filesystems.prlufs (2010.12.28)
Startup Items:
StartupComponent: Path: /Library/StartupItems/StartupComponent
Problem System Launch Daemons:
Problem System Launch Agents:
Launch Daemons:
[System] com.adobe.fpsaud.plist 3rd-Party support link
[System] com.fitbit.galileod.plist 3rd-Party support link
[System] com.spsecure.daemon.plist 3rd-Party support link
Launch Agents:
[System] com.adobe.AAM.Updater-1.0.plist 3rd-Party support link
[System] com.spsecure.useragent.plist 3rd-Party support link
User Launch Agents:
[not loaded] com.adobe.AAM.Updater-1.0.plist 3rd-Party support link
[not loaded] com.adobe.ARM.[...].plist 3rd-Party support link
[not loaded] [email protected]
[not loaded] com.google.keystone.agent.plist 3rd-Party support link
User Login Items:
iTunesHelper
AdobeResourceSynchronizer
Dropbox
EvernoteHelper
Fitbit Connect Menubar Helper
Google Chrome
Internet Plug-ins:
Flip4Mac WMV Plugin: Version: 2.4.4.2 3rd-Party support link
FlashPlayer-10.6: Version: 11.9.900.170 - SDK 10.6 3rd-Party support link
Default Browser: Version: 537 - SDK 10.9
AdobePDFViewerNPAPI: Version: 11.0.06 - SDK 10.6 3rd-Party support link
AdobePDFViewer: Version: 11.0.06 - SDK 10.6 3rd-Party support link
Flash Player: Version: 11.9.900.170 - SDK 10.6 Outdated! Update
QuickTime Plugin: Version: 7.7.3
OfficeLiveBrowserPlugin: Version: 12.3.6 3rd-Party support link
AmazonMP3DownloaderPlugin101750: Version: AmazonMP3DownloaderPlugin 1.0.17 - SDK 10.4 3rd-Party support link
Silverlight: Version: 5.1.20913.0 - SDK 10.6 3rd-Party support link
iPhotoPhotocast: Version: 7.0
Audio Plug-ins:
BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
AirPlay: Version: 1.9 - SDK 10.9
AppleAVBAudio: Version: 2.0.0 - SDK 10.9
iSightAudio: Version: 7.7.3 - SDK 10.9
User Internet Plug-ins:
Move-Media-Player: Version: npmnqmp 071503000004 3rd-Party support link
fbplugin_1_0_3: Version: (null) 3rd-Party support link
3rd Party Preference Panes:
Flash Player 3rd-Party support link
MacFUSE 3rd-Party support link
Bad Fonts:
None
Old Applications:
Microsoft AutoUpdate: Version: 2.3.6 - SDK 10.4 3rd-Party support link
/Library/Application Support/Microsoft/MAU2.0/Microsoft AutoUpdate.app
/Library/Application Support/Microsoft/MERP2.0
Microsoft Error Reporting: Version: 2.2.9 - SDK 10.4 3rd-Party support link
Microsoft Ship Asserts: Version: 1.1.4 - SDK 10.4 3rd-Party support link
SLLauncher: Version: 1.0 - SDK 10.5 3rd-Party support link
/Library/Application Support/Microsoft/Silverlight/OutOfBrowser/SLLauncher.app
Amazon MP3 Downloader: Version: INFO_PLIST_VERSION - SDK 10.4 3rd-Party support link
Time Machine:
Skip System Files: NO
Auto backup: YES
Time Machine not configured!
Top Processes by CPU:
37% prl_vm_app
10% WindowServer
9% Google Chrome
1% hidd
1% Agent
Top Processes by Memory:
602 MB prl_vm_app
115 MB Google Chrome
82 MB Google Chrome Helper
82 MB Mail
70 MB Microsoft Word
Virtual Memory Information:
137 MB Free RAM
782 MB Active RAM
718 MB Inactive RAM
1.50 GB Wired RAM
23.02 GB Page-ins
1.21 GB Page-outsHey greytdogs,
I would give some of the suggestions in this link a shot:
OS X Mavericks: If your Mac runs slowly
http://support.apple.com/kb/PH13895
Welcome to Apple Support Communities!
Sincerely,
Delgadoh -
My MAC is running slowly and I am having to continually remove unwanted pop ups and leave unwanted pages which appear including MACkeeper. If I am on a sports website, betting pages appear - any ideas?
Click here and follow the instructions, or if there’s a type of adware not covered by them on the computer, these ones. If you're willing to use a tool to remove it(you don't need to, but may find it easier), you can instead run Adware Medic; this link is a direct download.
(120718) -
My computer is running slowly and slowly
my computer is running slowly and slowly and the sound of fan becomes louder and louder .I suspect my computer get infected by virus
1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. All it does is to collect information about the state of the computer. That information goes nowhere unless you choose to share it. However, you should be cautious about running any kind of program (not just a shell script) at the request of a stranger. If you have doubts, search this site for other discussions in which this procedure has been followed without any report of ill effects. If you can't satisfy yourself that the instructions are safe, don't follow them. Ask for other options.
Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
4. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
5. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
6. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts 51 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports 'com.autodesk.AutoCad com.evenflow.dropbox com.google.GoogleDrive' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 ` route -n get default|awk '/e:/{print $2}' ` 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^\([0-9]+\) /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n\t(%s)\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' /^ *$|CSConfigDot/d;s/^ */ /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g ' ' s/^ +//;5p;6p;8p;12p;' ' {sub(/^ +/,"")};NR==6;NR==13&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple |Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/:/ { n++;print;} END { if(n<185) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' ' s/^.{52}//;s/ .+//p ' ' /Launch[AD].+\.plist$/ { n++;print;} END { if(n<185) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/root/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1000) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' '/\/etc\/(auto_m|hosts[^.]|peri|sshd?_c)/s/^\.\/[^/]+//p' ' /\/(Contents\/.+\/Contents|Frameworks)\//d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| ","||kMDItem'${p[35]}'=");sub("^.."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[9]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/ { next;} /%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";} $3~/(sh|ng|ic)$/ { n=split($3,a,".");sub(/_2[01].+/,"",$3);b=b"\n"$2" "$3" "a[n]" "$1;c=c$1;} END { d="sort|tail -n'${p[38]}'";print b|d;close(d);if(c)print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text$|POSIX sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' BEGIN{FS="= "} /Path/{print $2} ' ' /^ +B/{ s/.+= |(-[0-9]+)?\.s.+//g;p;} ' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' /:/{$0="'"${p[28]}"'"};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/\(L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil PlistBuddy whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof );c2=(com.apple.loginwindow\ LoginHook '-c Print /L*/P*/loginw*' '-c Print L*/P*/*loginit*' '-c Print L*/Saf*/*/E*.plist' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \)' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' '-c Print\ :'${p[35]}' 2>&1' '-c Print\ :Label 2>&1' '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status "-F '\$Time \$Message' -k Sender kernel -k Message Req 'Beac|caug|dead[^bl]|FAIL|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA\(|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:' -o -k Sender fseventsd -k Message Req 'SL'" '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/*/*.{BS,Bas,Es,OSXU,Rem}*.bom' '{/,}L*/Lo*/Diag* -type f \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true \) -execdir stat -f:%Sc:%N -t%F {} \;' '-L {/{S*/,},}L*/Lau* -type f' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Compon,Ex,In,iTu,Keyb,Mail/B,P*P,Qu*T,Scripti,Sec,Servi,Spo}* -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto_master,{cron,fs}tab,hosts,{launchd,sysctl}.conf,ssh{,d}_c*} {,/usr/local}/etc/periodic/*/* .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' -i4TCP:0-1023 );N1=${#c2[@]};for j in {0..8};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents launchd Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear;};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0(){ [[ "$v" ]]&&echo "$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "$s"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;A0;{ A2 0 $((N1+1)) 2;C0;A1 0 $N1 1;C0;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;A2 4 20 21;B7 6;B2 9;A4 14 7 52 9;B2 10;B6 9 10 4;C3 25;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D23 24 24 32 31;D13 25 37 32 33;A1 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D23 14 1 48 42;D12 34 43 53 44;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D23 20 42 32 41;D23 14 2 48 43;D13 4 5 32 1;D22 4 4 50 0;D13 14 3 49 5;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
7. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
8. If you see an error message in the Terminal window such as "syntax error," enter
exec bash
and press return. Then paste the script again.
9. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
10. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report the results. No harm will be done.
11. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with "Model Identifier." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
12. When you post the results, you might see the message, "You have included content in your post that is not permitted." It means that the forum software has misidentified something in the post as a violation of the rules. If that happens, please post the test results on Pastebin, then post a link here to the page you created.
Note: This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed. -
I have Iconia Tab A500 running 3.0, need help updating, I downloaded all updaes list in the acer supprt, all versions, 3.0, 3.1, 3.2, and 4.something, I read on the acer support somewhere I can use a microsd card to update my device, because acer no longer provides automatically, when i try it says "poor network connection, move to anthoer location.", Do I need to update all the listed updates, or can i only update, using the 4. 0? to get the last known update. I also downloaded, "Documents, Apllications, Drivers, Patches, and O.S..... How do i intsall all these updates, I think am running the very lowest version available, Please Help me... Thank you in advance.
the update listed on the acer website, that mentions the a500 update is 'kernal source code (for Android 4.0 Ice Cream Sandwich) it's 96.7MB's released 2012/05/08' is that the right one i need? There is also a list of 3 O.S updates, released in 2014/09/05, 391.5MB's, 394.3MB's, and 391.5MB's large, what are those updates, I clicked the model and followed the directions that the acer website asks, and i ended with a list of update released in 2014/09/05, and a Document update released in 2014/12/17, 112.7KB's large, list of updates reased in 2014/.... and in the Android 4.0 culumn, there is an update that says O.S update released in 2014/09/05, 434.2MB's large, and a Patch Update, that was released in 2013/03/21, what are these updates? listedin the aver website... http://www.acer.ca/ac/en/CA/content/drivers
-
I am a noob and need help.nvidia windows kernel mode driver stopped responding
Hello
I am a noob and need help. It happens when I run in SLI.
I keep on getting this error message: "nvidia windows kernel mode driver stopped responding and has been recovered." In most cases, screen freezes so I have to reboot.
Thanks for the help
S/N602-V282-22SB1307082992
602-V282-22SB1307082991
601--7811-010B1306093332
BennoSne
Video card driver version 337.88
Board: MSI z87 xpower
Bios: Version 1.7
VGA:2 MSI 770GTX Twin Frozr 4gb oc SLI
Intel Core i74770k 3.5GHz
MEM: Kingston KHX21C11T3K4/32X 32GB
HDD: Samsung 256gb SSD pro
COOLER: Corsair 80HWater Cooler
OC: (3,5) Normal mode
OS: Windows 8,1 64bit Professional
PSU: SilverStone ST1500
3.3V +5V +12V1 +12V2 +12V3 +12V4 +12V5 +12V6 +12V7 +12V8 +5VSB -12V
40A 40A 25A 25A 25A 25A 25A 25A 25A 25A 6.0A 0.5
Benchmark 3D Mark 11 score 12831 SLIdo you have any OC applied?
does it worked before or its a new build? -
Error -Your Computer Is Running Slowly and Affecting Audio Quality
Getting this error very frequent on Users Computer - I have made sure the Physical Memory and CPU usage is below 10 still we have the error for users .
Lync 2010 Client -Is there some logging that i can enable on Client side which will give me more insight as to what is the cause of error .
Have Already Checked below links these are very generic and basic but of no help !!!
http://social.technet.microsoft.com/wiki/contents/articles/7168.lync-troubleshooting-your-computer-is-running-slowly-and-affecting-audio-quality.aspx
http://office.microsoft.com/en-us/communicator-help/your-computer-is-causing-poor-audio-quality-HA102221829.asp
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. Anand ShankarHi Anand,
Does the issue happen only with external users or all of the users? Do you use VPN? Please provide us more environment configuration information.
Please make sure your computer’s device drivers are up-to-date.
You can try a different audio device to test the issue.
For a list of devices optimized for Lync:
http://technet.microsoft.com/en-us/lync/gg278164.aspx
Here is another similar case for your reference:
http://www.techysnippets.com/your-computer-is-running-slowly-and-is-affecting-audio-quality-lync-2010/
Note: Microsoft is providing this information as a convenience to you. The sites are not controlled by Microsoft. Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information
found there. Please make sure that you completely understand the risk before retrieving any suggestions from the above link.
If the issue persists, you can enable logging tool on Lync client to simple troubleshooting the issue with the help of the link below:
http://technet.microsoft.com/en-us/library/gg195661(v=ocs.14).aspx
What’ more, you can use the following methods for further troubleshooting:
Check the monitoring report:
http://blog.insidelync.com/2012/06/a-primer-on-lync-audio-quality-metrics/
Troubleshooting Lync Call Quality Locally with Snooper
http://blogs.technet.com/b/nexthop/archive/2012/12/10/troubleshooting-call-quality-locally-with-snooper.aspx
Note: Microsoft is providing this information as a convenience to you. The sites are not controlled by Microsoft. Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information
found there. Please make sure that you completely understand the risk before retrieving any suggestions from the above link.
Best Regards,
Eason Huang
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
Help, new to Linux and need help installing 8i
I am new to Linux and some of this stuff..
Yet,I have gotten the JDK116_v5 installed and working on my box.
I have cut a cd for Oracle8i and need help..
I have also recopiled my kernal as well...
Does any one know where I can get help...
nullAl Pivonka (guest) wrote:
: I am new to Linux and some of this stuff..
: Yet,I have gotten the JDK116_v5 installed and working on
: my box.
: I have cut a cd for Oracle8i and need help..
: I have also recopiled my kernal as well...
: Does any one know where I can get help...
Try http://www.akadia.com/html/dod-frame.html for Redhat.
http://www.suse.de/~mha/oracle/ for SuSE
Also peruse these
http://www.akadia.com/html/dod-frame.html
http://jordan.fortwayne.com/oracle/
Colin.
null -
I am setting up a new iMac and need help syncing files to Dropbox. On my old computer I had it set where when I saved a document, it was saved on my hard drive, as well as to a folder in Dropbox. I can't remember how I set this up. Any help?
The way that Dropbox works is that it keeps a copy of all your files in your local Dropbox folder on your hard drive (which is, by default, directly under your home folder). Adding files to that folder will sync them to the Dropbox server.
You do of course have to download the Dropbox application to enable this (download link at the top right of http://dropbox.com ).
Matt -
My screen freezes and popup message says I need to do a shutdown and then restart. It does it sometimes 2 times a day. Im new to apple and need help.
Bad or incompatible RAM is, more often then not, the cause of most Kernel Panics. It could also just need to be reset.
Here's the most used site for Resolving Kernel Panics. Please do all the steps in order, even if you don't think you need to do a certain step.
Here is a great MacFixIt article.
Good Luck!
DALE -
Uloading ebook using iProducer rec'd error: ERROR ITMS-9000: "Unable to parse nav file: toc.ncx" at Book. I don't understand and need help fixing it. Please Help if you've the knowledge.
Many ThanksYep, i just did it again. The entire scroll-bar widget, complete with formatted text, graphics, etc., pasted itself nicely in another book. Two different files, the same widget.
I use the scroll-bar widgets for most of my texts. (I have audio buttons on the side, and the scripts are within the widget, to the side). My only text is within widgets, and text boxes, naturally.
I am following your recommendation: cleaning files, etc. I am remaking the book anew. I need to convince the EPUB bot or whatever that my file looks and works nicely on all my devices. You would expect an error message when previewing the book: 'Hey Amigo, your file is flawed, stop working on it, and get back to the drawing board." Should be able to try again next Monday. -
Hi
Project Server 2013: I am using Project Server Permission Mode and need help with permission assignments?
How can I change Permissions for the individual users to see specific projects or all projects in project center and to see specific quick launch items?
For Example: if i have 4 users, A, B, C and D. what i want is:
User A can see everything and act as a project manager or Admin.
User B can view all projects in project centre but can change the schedule or resource assignment etc.
User C can only act as approver of projects and can view all projects in project centre.
User D can only view specific projects for which permissions are given.
can i have some expert help in sorting and understanding permission modes... as i was playing with project server mode permissions and can't figure out how to apply the above scenario to set of my user.
Thanks in Advance
Cheers
AJ
Ajay KumarHi Ajay,
Please refer to this link for detailed explanations about PS2013 security model.
http://technet.microsoft.com/en-us/library/cc197638(v=office.15).aspx
Actually, it will take a couple of days to explain in detail the security model that is a fundamental and tricky aspect of every PS implementation. But basically, you NEVER set permissions for a single user. You have groups in which your insert users. Groups
define "what users can do". Then you associate groups to a corresponding category. Categories define "what user can see". Thus the association of a group with a category will set "what the user can do on the objects he can see". Then, for more advanced security
level, you can use the RBS that will consist in "branches" in which you'll insert users. Based on those branches, you'll customize categories to fine-tune what user can see (for projects and resources) depending on the RBS branch and level.
I'd advice you to start "playing" in a test environment with the default categories/groups that might probably cover your need.
Concerning your 4 users:
user A : add him to the "administrator" group. Be careful that you're mentionning either project manager or administrator, which are 2 groups/categories with totally different permissions level.
user B : basically can see everything and change everything? it could be in the project manager group, assuming that there are no project visibility restrictions on the category via the RBS.
user C : waht do you mean by "approver"? Workflow approvals? Then it will be the portfolio manager group. Task update or timesheet approval? Then it is another long topic: please refer in the documentation to the "status manager" and "timesheet manager"
concepts. There are not related to the security model. In a few words, the status manager is the owner of the project plan, is defined for each task and approves tasks updates. The timesheet manager is an attribute defined for each resource in its parameters
and approves resource timesheet.
user D : you have to define which permission level must be given to this user. Basically it could be a team member that will see only projects he's in the project team. Note that team member cannot interact with the project plan in another way than submitting
timesheets and/or tasks updates which must be approved.
Once more, those are large and complex subjects that require a deep dive into your business model and tons of tests in a test environment.
Hope this helps.
Guillaume Rouyre - MBA, MCP, MCTS -
when ever i try to download my iPod recovery software, it keeps saying connection timed out. really annoyed and need help to fix it
- Next try the manual install method of:
iDevice Troubleshooting 101 :: iPhone, iPad, iPod touch
If the iPod was Disabled, place the iPod in recovery mode after the firmware download is complete and then restore using the instructions in the article. Sometimes recovery mode timeouts and returns to disabled before the firmware download is complete.
- Then try on another computer
Maybe you are looking for
-
W520, Windows 7 (64 bit), NVIDIA Quadro 1000M 2GB DDR3, purchased November 2011. Problems (related?): -External monitor remains unrecognized when connected to W520. -NVIDIA not recognized or working. Maybe reason external monitor not recognized? Tr
-
No attachments when converting Outlook email to pdf
I am using Outlook 2010 and Adobe X Pro. When I try to convert an email message to a pdf it does not include the attachment. (In the setting for conversion I have "Include all attchments in the Adobe PDF" selected.)
-
New Itunes (Beginning april 2010) and iphone issue
So, when you sync with the new itunes, there's an option to convert higher bitrate songs to 128 KBPS AAC...this saves me a lot of space as I only download high quality music, roughly 2 gigs saved space outta 6 gigs I had prior to...anyway, after wait
-
I am trying to use import and export statements in two different programs . The control from one program goes to another program with the function modules they have . I dont see the value while importing. export i_field1 to memory id 'bus_ind' import
-
Please help!