Leopard Time Machine

can you still recover photos if they were deleted before installing Leopard and Time Machine????????

no. Time Machine can only recover files from the backups it made.

Similar Messages

  • Can't start with Snow Leopard Time Machine backup in Lion

    Hi,
    I have seen coverage in MacWorld (http://www.macworld.com/article/161421/2011/07/migrate_time_machine_backup_to_ne w_mac_in_lion.html) of using my Snow Leopard Time Machine backup as the starting point for my Lion TM backup. This saves all my revision history of all my documents and makes them available in Lion. However, when I follow the steps given in the MacWorld article, I don't get the same set of dialog boxes and am never given the option to use a previous disk.
    Any hints to getting this to work would be much appreciated.
    -Eric

    A  whole  lot  about  Time  Machine for help with TM problems.  Also you can select Mac Help from the Finder's Help menu and search for "time machine" to locate articles on how to use TM.  See also Mac 101- Time Machine.
    Pondini's Time Machine FAQ

  • Can Yosemite read a snow leopard Time Machine backup

    Can Yosemite read a snow leopard Time Machine backup. Once I installed Lion over SL and it was a disaster since I could not get any docs or photos back, so had to put SL back on my old iMac.
    Will 10.10 give the same problem or is there a way to migrate the old 10.6.8 data to 10.10?
    Thanks

    Yes, you can do that. The only limitation is that you can't encrypt the backup volume.

  • After clean install of Snow Leopard, Time Machine did not restore all files.  When I try to restore these files I get "Not enough disk space" error.  What do I need to do to get these important files back onto my Mac from my external hard drive??

    After clean install of Snow Leopard, Time Machine did not restore all files.  When I try to restore these files I get "Not enough disk space" error.  What do I need to do to get these important files back onto my Mac from my external hard drive?? 

    Janet.b wrote:
    About 3 years old...pretty dated now I guess.  Am thinking I may just need to have it upgraded by a Mac tech.
    For what the Apple Store's charge you can buy almost buy a new computer.
    Just for giggles I brought my old laptop in for a drive upgrade and asked, they wanted $600 for a drive that only cost $120 at the time and it was a slow 5,400 RPM drive. The new Mac's of a similar make were going for $1000.
    I did the drive replacement myself, got a faster drive of better quality for $300 instead.
    Then another time I asked for a RAM upgrade from 4GB to 8GB, they wanted to charge $400 + $35 for the labor.
    The same RAM is on Crucial.com for $90 and all I need is a 00 micro phillips screwdriver.
    So you see what's going on here.
    I think what you should do, if your out of warranty/AppleCare, is to call up the local PC tech guy who also does Mac's and have them fix you right up.
    They can offer more personalized care which you need. Clone your old drive to the new and everything.
    With Apple they are overworked at the Genius Bar and just place roadblocks so you buy a new machine instead.
    For instance, all new iMac's now have proprietary drive software installed on the hard drives for heat monitoring. So now the only choice a user has is to bring their iMac into a Apple Store for a very expensive drive upgrade, which a person then decides the money is better spent buying a new machine.

  • Snow Leopard Time Machine process question/possible problem

    For starters I want to say that I am not dealing with my own machine, but a friend's, so there's some missing information. Any help would be greatly appreciated!
    Ok, so my best friend bought a 15" MBP thru me during my short time as an Apple retail employee, which is how I got called in to "fix" it, although I'm still better with PCs than Macs. Anyway, it was purchased around December 2010, has at least Snow Leopard, intel i5 processor, 500 GB HD, not sure if 5000 or 7200 rpm, 4GB RAM. A day or so ago it started acting "weird" he says, like when closing google chrome the color wheel spun forever and took forever to close, and from then on every program acted the same; took forever to open and close. He said it was like there was some major process running in the background that was just using up all of the RAM and processor, leaving him with nothing to use for anything else. He shut it down and restarted it several times, but it acted the same. Sometimes he'd even have to force power it down. He then decided to do a wipe and restore with Time Machine. Thanks to google images I know for sure that he went thru all the bs with selecting what exactly to do, what restore to use, and where to install it, and that the transfer screen with the finder-to-fnder-like image and the progress bar appeared and completed fully before it automatically restarted itself. White screen with Apple logo appeared, he heard the boot up chime/BONG/WALL-E noise before the spinner wheel came up under the logo, which is where it stands now.
    The only question/concern is that it has been here for 10 hours, literally. Now the spinner is STILL spinning, that has not frozen that either of us are aware of, but both of us being so new to Macs we are completely unsure if it's ok. I did some online research and I've seen where people have had their macs freeze on boot up, but they usually don't chime; or it took like 14 hours to do the entire restore process, but they were significantly older and slower machines. Like I said, this could be status quo for this process, but I honestly do not know that. Feel free to just say "depending on the amount it's restoring, it could very well take that long, be patient" if that's the honest truth. I'm looking for verification.
    PS - his time machine backup is on an external USB hard drive, which is plugged in, and it's from November as he forgets to plug it in, but he has like photoshop and aperture, takes lots of pictures (yes we know those since November are gone), and honestly is on his MBP so much the only way I can think to describe it is that he literally uses it like a cheap whore.
    Thank you all!

    delete all drivers using the correct un-indtstall software, re-instalthe mac softeware and in stalll. GO TO SYSTEM PREFS, and select the printer and add the printer to the left side for install
    , then select that partictular printer.

  • Snow Leopard Time Machine - Backup to a Network Drive is it possible?

    I have a MacBook Pro 17" 2.5Ghz, with a 250gb harddrive, running Snow Leopard 10.6.1. I want to do a clean reinstall of Snow Leopard and I want to run a backup first. I don't have any external drives big enough for the job, but I do have network drives that have enough space. Can anyone give me directions on how to set up Time Machine to work with network destination drives? I read an online article that it was possible to do this with Leopard, though I never got it to work. If all else fails, I'll have to buy a new external drive. (Money's tight right now though.) If any of you have recommendations for good fast external drives, I'd appreciate your opinions on that too. (But I really hope I can get the network drives to work.) Thanks!

    Time Machine does not back up to network drives, except Time Capsules or a drive running Leopard or Snow Leopard on another Mac on the same local network. It will often back-up to a USB drive connected to an Airport Extreme, but even that is, technically, unsupported, and may require running a special Terminal command to make it work.
    Here's the official word: http://support.apple.com/kb/HT1733
    You may find some hardware or "hacks" that might make it work, in some cases, to a degree. But use them at your own risk.
    First, since this is *unsupported by Apple,* there's nowhere to go when there's trouble.
    Second, you're risking a future update preventing it from working, and perhaps rendering your backups useless.

  • Upgrade leopard to snow leopard with preexisiting snow leopard time machine backup

    I was using an old desktop Mac that had been upgraded to snow leopard from leopard a few years ago. Disk utility said I needed to repair my hard drive using the installation discs. I didn't have the snow leopard installation disc but still had the leopard installation disc which I used. When the computer re-installed leopard onto my hard drive, it created a partition: one with my hard drive running snow leopard, and then a new one with the space left over, running leopard. I got my replacement snow leopard installation discs and would like to delete the leopard partition, and go back to what I had before with the snow leopard drive. I do have a time machine backup (somewhat incomplete) and am making a copy of the physical snow leopard drive. I cannot access the most recent time machine backup since I'm back to running leopard and the time machine backup was made under snow leopard. I'm not sure how to proceed from here to upgrade to snow leopard. When I try to upgrade to snow leopard, I'm asked which destination drive to use. I don't want to use the snow leopard drive, since it would get deleted. So, would the leopard drive be the answer in this case? And what would happen to the contents of my old snow leopard drive? Would I end up with two partitions, both with snow leopard, but one being current (nothing on it) and the other being my old drive? Would I be able to get rid of the current drive and then use only my old drive? Thanks in advance for any help.

    First of all, it's unclear to me why you cannot select the old Snow Leopard partition.
    I also think you should have been able to repair hard disk using the leopard CD disk without actually installing leopard OSX by using the Utilities only.
    Also, Why is your Time Machine backup incomplete? Is that under Leopard or Snow Leopard?
    Now you have two partitions with two different OSX (Leopard and Snow Leopard). Your goal is to get back to Snow Leopard.
    I going to assume that the original Snow Leopard partition is inoperable (this is also question?) I would upgrade the Leopard partition to Snow Leopard. Afetrwards, use the Migration Assistant to bring in your data, documents, app, and settings. Once complete, you should be able to see your Time Machine backups. If all is ok then you can delete the original Snow Leopard partition.
    This is a somewhat complicated situation, so I am issuing a caveat that is my opinion only. Wait until another expert provides input regarding your situation to determine the best course of action.

  • How can I restore my contacts from a snow leopard time machine to clean instal of Lion

    I recently did a clean instal of Lion (which was wayyyyy to difficult by the way--why this wasnt an easy option to begin with I do not know and am not happy about).
    In my sleep depravation from the previous problem I accidentally synced my contacts from mobile me to take my computer contacts (deleting all my contacts from my phone and computer).
    Fortunately I have a back up on my time machine from my previously installed Snow Leopard.
    I tried to restore these files, but they seem to not be compatible.
    Steps I took:
    1.) -Opened Address Book in Lion
    -Opened time machine
    notes: i could not go backward in time with lion address book
    2.) -Copied files from time machine address book to desktop
    -completely unable to open files.
    I do not want to use migration assistant because it seems to want to take ALL my files over and frankly thats not what I want to do at all.
    PLEASE HELP!

    Hi,
    See this Excellent Link by Pondini on TM:
    http://web.me.com/pondini/AppleTips/Index.html
    May be Helpful...

  • Snow Leopard Time machine migration to Lion problem?

    I have a time machine backup of a mac with snow leopard that I made back in June. I want to put it on my new mac with Lion but it won't have this update - http://www.cultofmac.com/105225/if-you-want-to-migrate-from-snow-leopard-to-lion -tomorrow-you-need-this-update/ -
    I don't have the old mac to install this update on and update my time machine backup so what can I do??
    any suggestions please?

    Thanks Pondini, I was concerned that my Snow Leopard backups may not be compatible with Time Machine on Lion and I was going to use the Migration Assistant instead of the Setup Assistant. I have the WD NAS which I'm aware currently has AFP issues like many other NAS drives. I'm holding thumbs that by the time I get my new iMac WD would have released the firmware update so I don't have any issues.
    WD NAS users can setup a notification at the following link for when the new firmware becomes available:
    http://wdc.custhelp.com/app/answers/detail/a_id/7081
    Failing which you can always try this workaround from Alexander Wilde - http://www.alexanderwilde.com/2011/04/os-x-lion-connection-error-with-afp-and-wo rkaround/
    Cheers,
    Nelis

  • Question re installing Leopard/Time Machine and my lost Events

    I posted a question about my lost Events the other day. I've tried to rebuild my library using Library Manager but so far I still have one event with over 5,000 photos and the few events I've created or re-created since that mysteriously happened.
    I really really don't want to go through and organize these over again.
    Wondering if I would be able to use Time Machine to go back and restore my events if I were to install Leopard now.

    No that wouldn't work. Time machine will not know about anything from before it is installed.
    Regards
    TD

  • What are best external drives for Leopard Time Machine?

    Would appreciate advice. I'm getting a MBPro with Leopard. I notice a discussion says Maxtor is not formatted for Time Machine. Is there a list of external drives that are ready to go?
    Many thanks, I'm not too swift at my age at this stuff.
    Ralph

    <pre>
    Name : WD
    Type : Disk
    Partition Map Scheme : GUID Partition Table
    Disk Identifier : disk2
    Media Name : WD 5000AA External Media
    Media Type : Generic
    Connection Bus : FireWire
    Connection ID : 40718544432098240
    Device Tree : /PCI0@0/PCIB@1E/FRWR@3/node@90a94ce8a56bc0/sbp-2@c000/@0:0
    Writable : Yes
    Ejectable : Yes
    Mac OS 9 Drivers Installed : No
    Location : External
    Total Capacity : 465.8 GB (500,107,862,016 Bytes)
    S.M.A.R.T. Status : Not Supported
    Disk Number : 2
    Partition Number : 0
    </pre>
    and
    <pre>
    Type : Volume
    Disk Identifier : disk2s2
    Mount Point : /Volumes/G5iMacTimeMachineBackup
    File System : Mac OS Extended (Journaled)
    Connection Bus : FireWire
    Device Tree : /PCI0@0/PCIB@1E/FRWR@3/node@90a94ce8a56bc0/sbp-2@c000/@0:2
    Writable : Yes
    Universal Unique Identifier : 2BEBF1BD-2C4A-344A-A86F-B3B426205A66
    Capacity : 465.4 GB (499,763,888,128 Bytes)
    Free Space : 338.0 GB (362,963,013,632 Bytes)
    Used : 127.4 GB (136,800,874,496 Bytes)
    Number of Files : 1,380,202
    Number of Folders : 152,237
    Owners Enabled : Yes
    Can Turn Owners Off : Yes
    Can Repair Permissions : No
    Can Be Verified : Yes
    Can Be Repaired : Yes
    Can Be Formatted : Yes
    Bootable : Yes
    Supports Journaling : Yes
    Journaled : Yes
    Disk Number : 2
    Partition Number : 2
    </pre>

  • After upgrade to Snow Leopard, Time Machine not working

    Hi all,
    About two days ago I upgraded my MacBook 4.1 to Snow Leopard.
    Now Time Machine cannot backup to my external HDD anymore. One error message stated that it would not fine the settings file.
    Please help.
    What do I need to do to get my backups working again?
    Thank you

    Pondini - I have an issue too. And so I went to the troubleshooting tips you listed here and was not able to find a solution. Specifically, I don't get a message. I plain ole don't get nothing. After I installed Snow my first backup failed. Funny thing is the backup on my wifes computer also failed. She does not have an Intel Mac. It's a PowerBook G4. Hence no Snow Leopard there. I have a iMac 24 Aluminum. My Time Capsule backup worked fine until Snow. My TC is wired via ethernet. There is no latest date. When Time Machine backup starts the TM preference pane says it's "Making disk available" Something to that effect. And that's where it stays. If I then try to do anything with the preference panel - like close it - I find out the Preferences are not responding. So I force quit. I try to stop Time Machine backups and it's no good. The TM indicator - that little backwards running clock - in the menu bar just keeps on it's merry little way. The only way to stop it - shutdown. Strange thing is shutdown then refuses to - well, shutdown. I end up having to hold the power button for 5 seconds. I don't get error messages. I get nothing indicating what may be causing this problem. I have been searching these and other forums looking for an answer. I had hoped the user tips you listed would have a solution, but, alas, no. I deleted the timemachine plist in the "higher" library. No luck. I have powered down everything. No luck. Those were two ideas I saw that said they worked. So where do I go from here? Where do I look for error messages that will point me in the right direction? I'd appreciate any help from anybody.

  • Using Leopard Time Machine Backup after snow leopard install

    So I want to install Snow Leopard (and set up bootcamp), and I wanted to wipe my hard drive and do a clean install - because in the past i've had some trouble creating a bootcamp partition.
    would i be able to wipe and install snow leopard, and then easily restore my data and settings from a time machine backup?

    You may get a better response if you posted your question
    in the Snow Leopard forum...
    http://discussions.apple.com/category.jspa?categoryID=263
    Dave

  • Transfer leopard time machine backup content to Evernote (or any other viewer)

    Hi
    We had a Wiki on an old Mac server (OS X Leopard) which has now broken down.
    I would like to copy the Wiki content into a new format, namely to Evernote.
    We have backups available, which were done with time machine. It's output however is without the old wiki structure and thus not easy to decipher. Currently I have to enter each folder to see which .htmls are behind it. Many of the htmls do not load correctly (e.g. images don't show). Long story short, an easy copy+paste doesn't work ;-)
    Is there any way to revert this backup into a more manageable, structured form with or without a leopard or mac server at hand?
    I have a macbook pro 3 GHz Intel Core i7, 16 GB 1600 MHz DDR3, OS X Yosemite version 10.10.1
    This is what the content of a main folder looks like:
    And within one of the sub-folders:
    Thanks
    Gunda

    Hi
    We had a Wiki on an old Mac server (OS X Leopard) which has now broken down.
    I would like to copy the Wiki content into a new format, namely to Evernote.
    We have backups available, which were done with time machine. It's output however is without the old wiki structure and thus not easy to decipher. Currently I have to enter each folder to see which .htmls are behind it. Many of the htmls do not load correctly (e.g. images don't show). Long story short, an easy copy+paste doesn't work ;-)
    Is there any way to revert this backup into a more manageable, structured form with or without a leopard or mac server at hand?
    I have a macbook pro 3 GHz Intel Core i7, 16 GB 1600 MHz DDR3, OS X Yosemite version 10.10.1
    This is what the content of a main folder looks like:
    And within one of the sub-folders:
    Thanks
    Gunda

  • Leopard Time Machine onto Lion?

    Hi,
    I'm not upgrading to Lion. Leopard is fine for me on current machine, but I do use Time Machine just in case and ready for one day upgrade. My questions are these -
    1) will I be able to boot from Leopard-origin Time Machine into new Lion computer? and
    2) do I need to have latest Leopard (10.6.8 - I'm currently on 10.6.5) installed in order to boot from TM disk to Lion?
    - Thanks all

    The Time Machine disk is not a boot disk.
    To download the LIon installer you will need Snow Leopard with 10.6.8 in order to access MAS.
    If you download and install over SL, using the computer, your data is preserved but with some changes to how it is stored. (ie you cannot just copy it back to SL later).
    The alternative is to clone your SL onto an external disk, boot into the clone (hold down the Option key during the boot), download the installer onto the clone and make a copy of the folder (the original gets deleted after the install).
    Then you can use the DIsk Utility on the clone to wipe the computer disk and check it out, re-partition etc, before installing Lion to it from the clone.
    In this case, the Migration Assistant can take your data from either the TM or the clone. (note that it refers to the TM as "MacIntosh HD" which is a bit confusing)
    The advantage of the clone is that it is a bootable backup and if things go wrong you can either revert to SL or re-install Lion afresh.

Maybe you are looking for

  • Safari 5 - Lost Reopen all windows from last session

    Do you know, how to make "Reopen all windows from last session" work in Safari 5? I dont have this option in History- http://tinypic.com/r/2m6lwfb/6

  • Jsp taglibs in include files not detected, throws errors, no code insight

    I have a jsp which is included in all the other jsp. it looks something like this taglibs.jsp <%@ taglib uri="http://java.sun.com/jsp/jstl/core" prefix="c" %> <%@ taglib uri="http://java.sun.com/jsp/jstl/fmt" prefix="fmt" %> <%@ taglib uri="http://ww

  • Two External Monitors - HP laptop G71 343US

    Good afternoon, I have the aforementioned  hp laptop G71 343US.  I work from home and I use a single external monitor almost everyday connected via the VGA port.  I happen to come across another external monitor and was looking on amazon at some part

  • Custom tab order Acrobat Pro 8.0

    I just switched from Acrobat Pro 7.0 to 8.0 and I'm already lost. I have forms that have a hundred form fields on each page, and I need to set them to tab in a specific order. When I used Pro 7.0 it was a simple matter to skip any form field which di

  • Parent/child issue

    Hello, I need to create a report in which if the user selects a specific parent, it should only allow to select the children under that parent. so e.g. Under time dimension, There is year and Quarter property. so when a user enters 2008 as the year,