Leopard to Leopard Network Shares Not Working
I see numerous threads about Leopard shares and Windows. However, I do not see any threads about issues with Leopard to Leopard shares. I have three Macs in the house and one Windows XP box. The Windows XP box works perfectly fine seeing and sharing with all the Leopard machines. The issue is, my PPC Mac mini, C2D MacBook Pro, and C2D MacBook are not playing nice with each other.
Here is the setup:
PPC Mac Mini running Leopard has a FW External Drive connected to it and is connected wired.
C2D MacBook and C2D MacBook Pro are connected via airport on a 2Wire Gateway/Router my ISP provides.
I setup to share specific folders on the internal Mac mini HD and the root FW drive connected to it. When trying to connect on either MacBook or MacBook Pro, I do not have permissions for the users setup on the PPC Mac mini. When I go back to check the settings on the Mac mini, Leopard is not keeping all of the shared folder settings and I have to continually re-add them only to have the same thing happen again.
Am I losing my mind or is this a major bug with Leopard? Is there any way to successfully share out drives to individual users on the network?
Same issue; I share my Documents folder and everyone can see the folders below it but have NO access ot most of the sub folders (the minus symbol). The one exception is a folder "Civilization IV Demo";
Permissions:
Documents (MAIN FOLDER):
tpfannes(ME) read and write
everyone read and write
Sub folders (sub folders under Documents)
Civilization IV Demo (works):
tpfannes(ME) read and write
everyone read only
staff read only
Data Folder (No workie)
tpfannes(ME) read and write
everyone no access
I did a erase and install with Leopard and restored the files from a backup using Apples Backup utility.
I could probably get to a terminal window and modify permissiosn these via. chmod but I'm not all that comfortable with that.
Any ideas????
tim
Similar Messages
-
iPhoto says it won't import photos from my Fujifilm Finepix S1000 camera because it's the wrong format (jpeg). It always has before... but I upgraded to Lion then went back to Snow Leopard and now it's not working. Suggestions? Thanks!
As a Test:
Hold down the option (or alt) key and launch iPhoto. From the resulting menu select 'Create Library'
Import a few pics into this new, blank library. Is the Problem repeated there? -
My cellular network is not working on my iphone 5 after updating to ios 8.1.2 !! It was working fine on ios 8.1.1
my phone was not jillbreak or hacked to unlock. i need help, what can I do?Did you do the Reset Network Settings as I described above?
There is no way to go back. You can try reseating your nanoSIM or replacing it. Or call your cell provider and have them check the provisioning on your phone.
Or Restore your iPhone from your backup in iTunes. -
My cellular network is not working on my iphone 5 after updating to ios 8.1.2 !!
It was working fine on ios 8.1.1 i need help, what can I do?I have this problem too - and it is on a BRAND new iPhone 6 - I have definitively tracked the issue to the moment I upgraded to iOS 8.1.2 - and am beyond frustrated. No fix to tell you about, sorry…but you can read my post here if you are into the whole "misery loves company" thing: iOS 8.1.2 Cellular data problem (Definitive - maybe)
-
My Iphone 4 network is not working in Malaysia
My Iphone 4 network is not working in Malaysia as I offered for 2 month period by behalf of my company and when buy a sim card in Malaysia then I only realise there were no network and I bring to a shop and they upgraded my Iphone and it stuck on the activation part which require a network. Any Solution ?
iphone 4 and 4S have two microphones...bottom n top...sometimes top microphone is covered by the case or sheet as in my case..and when i just put off the case it was working fine.....i just got problem today and today it is solved again.....may be its ur case or may be ur case is a genuine hardware software problem...just for info
-
Wrt610n wireless network does not work after firmeware upgrade
Hi
I just updated my Wrt610n hardware version 1 to the newest firmware, it did finish with sucess, I did factory reset reboot and reconfig. But the wireless network does not work , cant connect computers to it. Did downgrade the firmware to the same it was and restore my settings but still wireless does not work. But router works fine with lan. Any suggestions? maybe the firmware tosted the router?
Regards
StefanUpdate -
After last reset and reupgrade with the newest firmware for hardware version 1 I could config the router and connect 2 computers with wireless - but only for about 15 mín - then they lost connection and could not reconnect.
I did then get the newest update for hardeware version 2 - just to try and upgraded with that and got success, and now I have reset the router again and config it and those 2 computers are connected and have been for 1 hour now. So seems to be working - is it okay to have the firmware for hardware version 2 on my version 1 router?
Any thought what is going on - could it be that the other firmware had not loaded compleytle or? -
After Hard Reset My Social Network is not working....
Due to Some problem I did Hard Reset to my C7 but now My Social network is not working.
I had reinstall the nokia software but still its not working properly.
In the Social network all the graphics are coming like picture with a cross.Something is wrong because a hard reset will never leave the TC with green LED.
What version TC.. what firmware??
What OS on the computer? -
my network is not working i am in ghana and i use MTN network but it is not working why is it like that... pls get back to me now
It sounds as if you need to call your mobile carrier.
-
i have iphone 4 and i used it for a one and half years.i used it in sri lanka and doha qatar also..,recently i update it i.o.s 7, then it was working.after i.o.s 7.0.3 came i again updeted it and now my phone network is not working.now phone is locked.pls help.
I am seeing if I can get another battery even though I do not believe that is the issue. It keeps giving me vdd_under which I believe is under voltage, maybe it is just a faulty battery? It charges up like normal and functions normal (when plugged in, or above 90%) but it gives under voltage warnings and shuts down when in heavy use (using camera or going back and forth to imessage). When just sitting idle it doesn't seem to turn off until that 55-60% mark. It may just be a faulty battery because I feel I installed all of the other cables correctly when replacing the screen, and I don't think those connections should affect the battery anyway except for maybe the logic board cable (the 2nd cable to be unplugged after the battery cable) I guess I could clean that out as well with isopropyl just in case.
Any other suggestions would be helpful... and I will get back to you if a new battery helps. Thanks! -
Primary network does not work, guest network does work
I updated the firmware on the Time Capsule, after which we had a power outage. When the Time Capsule came back up, after a bunch of fiddling around we discovered that although the primary network cannot connect the Internet through our phone system router, the guest network works fine. The primary network does not work with the guest network turned off. Resetting the Time Capsule had no effect.
After an entire day of messing around, we went into Airport Utility, selected Internet, selected DHCP, and changed DHCP Beginning Address to match the one showing on the guest network (172.16). Now the primary network can see the Internet.
-
C7 Social Network does not work!
My nokia C7 social network does not work.
After log in my nokia account,it does not appear facebook&Twitter.it just empty
How to solve it?Did you try reinstalling Nokia Social? Which version is installed in your phone? Try the latest one http://betalabs.nokia.com/apps/nokia-social-1-3?req=true
If you want to thank someone, just click on the blue star at the bottom of their post -
Network does not work or the network signal attenuates rapidly
Network does not work or the network signal attenuates rapidly
Hello shishir_teamo,
If you are having issues with Wi-Fi on you iPhone 4S, check the following article that will help troubleshoot the issue.
iOS: Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/ts1398
Thanks for using Apple Support Communities.
Regards,
-Norm G. -
Wi-Fi to your iPhone does not work with the knowledge that I have worked Restart for the same purpose network does not work What is the solution please help as soon as
Okay, the Wi-Fi doesn't work. Turn it on.
Beyond that, we cannot offer any other assistance as you've failed to provide useful details of the problem.
When responding, post in your native language as your English makes very little sense. -
So my airport extreme recently had some nat/dns issue and in the airport utility displayed a warning about it and to correct it. I wasn't sure what to do so i pressed the resolve icon and now my guest network is not working.
Anytime you change networking hardware, it is always a good idea to perform a complete power recycle of your networking components.
I would recommend that you do the following as a minimum:
Power-down the modem, AirPort base station, and computer(s).
Disconnect the AirPort base station from the Internet broadband modem.
While all of the devices are powered-down, perform a "factory default" reset on the base station. This will get it back to its "out-of-the-box" configuration and make setting it up much easier, especially if you use the "Assist me" process within the AirPort Utility. (ref: Resetting an AirPort Base Station or Time Capsule)
After the base station resets, go ahead and power it back down.
Reconnect the AirPort base station to the Internet broadband modem. For the Extreme and Time Capsule, be sure to connect the cable to the base station's WAN (circle-of-dots) port.
Power-up the modem; wait at least 10-15 minutes to allow it adequate time to initialize.
Power-up the AirPort base station; wait at least 5-10 minutes. Note: The AirPort's status light may continue to flash amber after it has intialized. That is because, there may be some additional configuration items necessary, like setting up wireless security, before the overall setup is completed to get a green status.
Power-up your computer(s).
In this basic configuration, the AirPort base station will broadcast an unsecured wireless network with a Network Name (SSID) of Apple Network NNNNNN. Network clients, connected to the base station either by wire or wireless, should now be able to access the Internet through the ISP's modem. Once Internet connectivity has been verified, you can use the AirPort Utility to configure the base station for wireless security and any other desired options. Please post back your results. -
Home share not working on iPad but is working on iPhone
Home share not working on iPad but is working on iPhone
Have you signed in at Settings > Music with same Apple ID and password as you used in iTunes and on your iPhone to enable Home Sharing?
Maybe you are looking for
-
While opening a new tab, a menu appears called clipboard. Question? How do I access my clipboard?
I need to open my clipboard so I can download everything I have added to my clipboard.
-
How do I sync Notes between my iPad and iPhone?
My Notes on my ipad are not syncing with the notes on my iPhone. Aren't they supposed to sync?
-
Is there a plug-in similar to next tab for v3.6.18
Is there a plug-in similar to next tab for v3.6.18?
-
i have updated my phone with the new 6 IOS. Since doing this my icloud account keeps saying that verification failed and the certificate for service is invalid. Folowin this problem my phone also does not recognise my other iphone contacts so i cann
-
Hi Experts, Based on the Ecentral order number I want to get the available error meesages in to the internal table. Please suggest me is there any FM available for this. Thnx, Sam.