Leopard to Leopard OK but Leopard to Tiger or Tiger to Leopard - error 8
I had a successful test this morning here in Tokyo on a Leopard to Leopard basis. Previously Tiger was OK i.e. Tiger to Tiger now Leopard to Tiger and vice-versa does not work. Any ideas how to get iChat AV working Leopard to Tiger ? What has changed ? Has anyone had a successful test of Leopard to Tiger out there ?
Thanks as ever,
Charles
Hi,
Leopard to Tiger in either direction works.
However it can depend on the way ports are opened in the modem or router.
If this is with Port Forwarding iChat 3 needs 31 settings.
Not all devices have tables big enough for this so people may have picked the lower numbers from the grop of twenty as 1-1 chats only require 4 of these ports.
iChat 4 uses port 16402 for all Vid and Audio parts of the chat and moves DOWNWARDS one port at a time for 10 ports if it can not get a connection.
As you can see there is a potential for a gap.
So ichat 3 users who wish to do AIM Text chats
(port 5190 on UDP and TCP = 2 entries), Bonjour (5297, 5298, 5353 on UDP and 5298 on UDP = 4 entries), Jabber (5220, 5222, 5223 on TCP = 3 entries) and A/V chats ( 5678 for invite, 5060, for negotiation, 16384-16403 for the Chats on UDP = 22 entries)
that can not make that many move to using as many as they can in the range used by iChat 4 (16393-16402)
10:52 AM Sunday; November 11, 2007
Similar Messages
-
Applescript works great in leopard, error -10814 in tiger
im running macs in a active directory domain. we have homefolders for users and they will not auto mount for a specific user group. i have an applescript that will take care of this, but when i run the script in tiger i get error type -10814. i can find that error anywhere. below is the script, like i said, works great in leopard but errors in tiger. both systems are bound to the domain with the same settings. i can manually mount the home folder on either version but want to automate this for users who have no clue what to do.
tell application "Finder"
activate
end tell
property targetURL : "smb://student-dfs-01/homefolders"
open location targetURLI don't know specifically, but I'd look at using the mount volume command rather than 'open location' for a SMB URL:
mount volume "smb://student-dfs-01/homefolders" -
Itunes wont open. Ive tried uninstalling, cleaned up my PC and then re installed again but still wont open! There are no error messages. It just wont open! Im very frustrated and anything would help! I have Windows 7 or Vista. Idk which
Hello Dr.Help,
Thank you for providing so much information about the issue you are experiencing with iTunes. It sounds like you have tried reinstalling it, but nothing happens when you launch it. I recommend following the steps in this article to resolve launch issues with iTunes:
iTunes for Windows Vista or Windows 7: Troubleshooting unexpected quits, freezes, or launch issues
http://support.apple.com/kb/ts1717
Thank you for using Apple Support Communities.
Best,
Sheila M. -
Hi All,
upload failed your changes were saved but could not be uploaded because of an error. you may be able to upload this file using server web page. save a copy button.
This is the issue which I am facing while working with SharePoint 2010. In a sharePoint 2010 document library I am having an excel file and I am trying to open it from Windows 7 and is office 2010.
I cam e across few suggestion as mentined below but unable to find the location where to do
Go to Resource Policies > Web >
Rewriting > Custom Headers > (if 'Custom Headers' is not visible, click
Customize on the right top to enable the view).
Create a new policy with the Resource as <fully qualified domain name of the SharePoint server:*/*> (for example https://sharepoint.juniper.net:*/* ).
Create the action as Allow Custom Headers.
Apply the settings to the required roles.
Please suggest.Hi rkarteek
All things you have to do is as follows:
1. Open regedit.exe
2. Naviagate to following key:
[HKEY_CURRENT_USER\SOFTWARE\Microsoft\Office\14.0\Common\Internet]
3. Click Edit Menu -> New -> DWORD with name of "FSSHTTPOff"
(without quotes)
4. Click on "FSSHTTPOff" and enter value of 1
5.
Close any Office Applications and browser sessions
6. Try to reopen your document (no more read only or failure to upload)
have a nice day! -
When I download and install iTunes it looks it does it, but then it never starts, instead gives an error report and says iTunes encountered some problem and has to close
i don't know how they solved it, i'm having the same problem on Windows XP
EventType : BEX
P1 : iTunes.exe
P2 : 10.7.0.21
P3 : 504d85d9
P4 : unknown
P5 : 0.0.0.0
P6 : 00000000
P7 : 08920740
P8 : c0000005
P9 : 00000008 -
I have a football game recorded on a DVD+R disc that I was trying to view on my MacBook using DVD Player. The video comes onto the screen, but immediately freezes, and then disappears. An error message comes up saying that DVD player unexpectedly quit. My MacBook operating system is Mac OS X, version 10.5.8. DVD Player is App version 5.0.3, framework version 5.0.7.
However, the DVD+R works on both my Dad's and my brother's laptops. My Dad's laptop is an iBook G4 with Mac OS X operating system, version 10.3.9. The DVD Player is version 4.0. My brother's laptop is a MacBook Pro with Mac OS X operating system, version 10.7.2. The DVD Player is App version 5500.26.1 and framework version 5.5.0. The DVD+R plays fine on their laptops, but will not play on mine.
AnthonyLao Bo,
yes, you can locate and copy a file from your HD to a USB key using UNIX commands. If you know the exact name of the file which you’re trying to locate, try this:
find / -iname filename -print
This command will search your entire internal disk for the particular filename. If you know that it’s within a particular user account, then you can save search time with this variation:
find /Users/username -iname filename -print
Either variation of this command will print all files found which have the given filename. Presuming that you’re able to identify the correct file, you can copy it to a USB key using the command
cp -p filename_returned_by_find /Volumes/USB_volume
If you’re not sure which volume name your USB key has, this command will show you what the possibilities are:
ls /Volumes
Please let me know if you have any trouble with these commands. -
i have an internet connection but when i open app store it shows error message "cannot connect to app store".when i try to sign in with my valid apple ID and password it says "connection failed".i tried keychain access settings but it did not help.please help me!!
Open Sysem Preferences from your Apple () menu top left in your screen then select the Firewall tab.
Make sure the Firewall is turned off. -
my iphone 4s wont turn on with out being pluged in and when i unplug it it dies instantly i pluged it in put it in dfu mode and tried to restore it hoping it might help but its stuck in dfu and has restore error 21 help!!!
Hey jestinsinclairr,
Thanks for using Apple Support Communities.
After reviewing your post, it sounds like you had one issue and then got a second trying to resolve the first. A frustrating situation for sure. The first article linked has what to do if it is not powering on unless plugged in. The second article addresses the error you are receiving when trying to restore.
iPhone: Hardware troubleshooting
http://support.apple.com/kb/TS2802
Will not turn on, will not turn on unless connected to power, or unexpected power off
Resolve iOS update and restore errors
http://support.apple.com/kb/TS3694#10
Check for hardware issues
Related errors: 1, 3, 10, 11, 12, 13, 14, 16, 20, 21, 23, 26, 27, 28, 29, 34, 35, 36, 37, 40, 1000, 1002, 1004, 1011, 1012, 1014, 1667, or 1669.
Have a nice day,
Mario -
I just got an iPod 4th generation and Im trying to sync my iTunes songs and books from my dell laptop on to my iPod but it says I need iTunes 10.6.3. So I tryed to download it on the apple website but it keeps saying that there is an error. I have already tryed uninstalling all Apple Inc. programs on my laptop then trying to install iTunes again but that has had no success what so ever. I have started to get very frusterated with this . Hopefully someone can help. I would really appreciate it. Any suggestion?
So I tryed to download it on the apple website but it keeps saying that there is an error.
What does the error message say? (Precise text, please.) -
Just installed itunes but when i try to open it this error message pops up: "apple application required" then it suggests uninstalling and reinstalling which i've done a few times but nothing works
When you say you have tried everything, it would help if you told us what you have tried to avoid duplication.
When you installed iTunes did you get any error messages?
Anyway, on the face of it it may be worth trying a separate install of Apple application support.
Uninstall iTunes again. Now open Apple Software update, assuming it is working.
It should offer to download iTunes. Don't do it yet, go to the Tools menu and select Download only.
Then download iTunes. Then go to the tools menu again and select Open download folder and you should see a collection of six files.
Before going on, can you get to this stage OK?
One further thing I would like you to check, are you ahving any problems with Windows updates? Could you check in Windows Update to see if there are any failures. -
Not very user friendly! Where is the place to report a problem!? I have been billed for an in-app purchase but not had the goods - I received an error message telling my I hadn't been charged at the time and now it is on my bill! What can I do?
You can try contact iTunes support via this page : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption
-
What's error 1 in adobe photoshop elements configuration? I have a computer with W Vista 8, Windows office home and business 2013. I recently tried to install Photoshop Elements by CD with serial number but on the desktop appears the following message: error 1 (configuration problem) try to uninstall and reinstall. I have done this but the message continues to appear
You haven't mentioned which version of PSE. If it is PSE 13, that requires a minimum of windows 7.
-
I tried to install the latest version of iTunes on my Windows PC, but the installation failed and I have the error message "Runtime Error R6034 An application has made an attempt to load the C runtime library incorrectly." When I then tried to run iTunes (assuming that, since the new install failed, my older version was still OK) I got the message "iTunes was not installed correctly. Please reinstall iTunes. Error 7 (Windows error 1114". I tried then uninstalling iTunes and reinstalling it fresh, but encountered the same problems. Help!
Try the following user tip:
Troubleshooting issues with iTunes for Windows updates -
Erased all content on 3G but now won't sync with iTunes. Error states, "This iPhone cannot be used because the Apple Mobile Device service is not started." I don't want phone service on this old 3G. Just want to use it as an iTouch. Any suggestions?
Type "Apple Mobile Device service " into the search bar at the top of this page by "Support"
-
I am able to imessage from my ipad all phone numbers in contacts but one. With it I get an error message that says "number is not registered with imessage". However, I am able to imessage that number from my iphone. Any suggestion?
Hey joshuafromisr,
If you resintall iTunes, it should fix the issue. The following document will go over how to remove iTunes fully and then reinstall. Depending on what version of Windows you're running you'll either follow the directions here:
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
http://support.apple.com/kb/HT1925
or here:
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
http://support.apple.com/kb/HT1923
Best,
David -
i have cc but lights room is coming up with ,An error occurred when attempting to change modules. can you help please
Error changing modules | Lightroom
Mylenium
Maybe you are looking for
-
MM Condition type to withholding tax mapping
Hi Folks, I have a query regarding MM and WHT configuration. Can we assign MM condition type to Withholding tax type or WHT Tax type-code combination so that at the time of posting a service based invoice we can identify the service category? Thanks
-
In 4.6C, How to delete IDoc stuck?
Hi, experts after I load more than 20000000 records data from R/3 side, I found out there are too many IDoc stuck in R/3 side use SM58. How can I delete these IDoc in one time? the T-CODE 'WE11' and the program 'RSETESTD' can not use in my 4.6C syste
-
Need help with adobe air!
Error message " ask for adobe air.: "a download error occurred. try to download again?" this is when I'm trying to download someting. Right now I"m using the update feature and or vudu (cloud service) Adobe air will not let me download to my compute
-
I wonder if anyone can help me. I would like to use some of the preset templates for a project I am working on. When I try and open them in the programme they are not there, but when I look in Applications>Presets, they are on my Mac. Probably bei
-
What is the need of Ajax?
hi, I want to know about : what is Ajax and and it needs?