Leopard vs tiger and filemaker 9

i am running Filemaker 9 on a g5 server. all designer units were running the latest version of tiger and filemaker 8.5. half of the studio upgraded to fm9 BEFORE upgrading to leopard and those units can connect with out files on the server. the other half of the studio upgraded AFTER their units were upgraded to leopard and cannot connect to the filemaker server...does anyone have any thoughts?
we have uninstalled, reintalled and checked the firewall so far...

Not really. All system fonts are normally outside of any user control. Functionally Tiger and Leopard use the same system fonts.

Similar Messages

I upgraded to snow leopard from tiger and to adobe cs5. my adobe and hp photosmart do not work. what can i do to get them to work.

my hp photosmart and adobe photoshop cs5 will not work even though even though everything was installed after a clean-erase and all additional software was installed as directed.

Well first you need to make sure your third party software is compatible with the operating system version, so for Adobe you need to check on their forums.
For HP you need to check their site that you've installed the correct drivers (if necessary)
Also make sure OS X is fully updated.

Leopard to Leopard OK but Leopard to Tiger or Tiger to Leopard - error 8

I had a successful test this morning here in Tokyo on a Leopard to Leopard basis. Previously Tiger was OK i.e. Tiger to Tiger now Leopard to Tiger and vice-versa does not work. Any ideas how to get iChat AV working Leopard to Tiger ? What has changed ? Has anyone had a successful test of Leopard to Tiger out there ?
Thanks as ever,
Charles

Hi,
Leopard to Tiger in either direction works.
However it can depend on the way ports are opened in the modem or router.
If this is with Port Forwarding iChat 3 needs 31 settings.
Not all devices have tables big enough for this so people may have picked the lower numbers from the grop of twenty as 1-1 chats only require 4 of these ports.
iChat 4 uses port 16402 for all Vid and Audio parts of the chat and moves DOWNWARDS one port at a time for 10 ports if it can not get a connection.
As you can see there is a potential for a gap.
So ichat 3 users who wish to do AIM Text chats
(port 5190 on UDP and TCP = 2 entries), Bonjour (5297, 5298, 5353 on UDP and 5298 on UDP = 4 entries), Jabber (5220, 5222, 5223 on TCP = 3 entries) and A/V chats ( 5678 for invite, 5060, for negotiation, 16384-16403 for the Chats on UDP = 22 entries)
that can not make that many move to using as many as they can in the range used by iChat 4 (16393-16402)
10:52 AM Sunday; November 11, 2007

Tiger and Leopard on one computer. Possible?

Hi,
I am going to purchase Leopard soon and wanted to ask this question. I have a few programs that have not been updated for Leopard and are a little old, so they probably won't receive an update. Can I:
1. Partition my hard drive and install Leopard on one and Tiger on another.
2. Install those programs on the Tiger partition and use Tiger only when I need those programs.
3. If they are updated would it be possible to delete the Tiger partition with Boot Camp and not lose any of my data.
OR
4. Would I have to use disk utility and wipe my disk and delete the partition.
Thanks for any help that you can give me.
milesb3

1. Partition my hard drive and install Leopard on one and Tiger on another.
Yes.
2. Install those programs on the Tiger partition and use Tiger only when I need those programs.
Yes.
3. If they are updated would it be possible to delete the Tiger partition with Boot Camp and not lose any of my data.
No. Now if you convert Boot Camp to VMWare or Parallels it will not need to reside on a different partition from either.
Backup your data prior to installing anything*:
http://www.macmaps.com/backup.html
- * Links to my pages may give me compensation.

Can I run Tiger and Leopard on the same computer

Hi folks.
I've been meaning to install Leopard for ages but have never got round to it (I bought the retail box when it first came out). I have upgraded my RAM to 2GB and my hard drive to 320GB with no problems.
My upgraded hard drive has been partitioned into 2 equal parts of 160GB. These appear on desktop as Mackintosh HD1 and HD2. HD1 is the disk with all my files, music, OS etc and HD2 is empty
I have 2 bootable clones of my present system - one is on a 160GB external and the other is the original 80GB HD that I replaced.
My question is this - can I install Leopard on to my 160GB external HD, then clone it on to the empty HD2. If I do this would I be able to run both Tiger and Leopard on the same Macbook?
Is there any problems with this plan? Would I be able to transfer between the 2 OS and how do I install Leopard on the external drive. Is it just a case of inserting the Leopard DVD and choose the external drive as the target?
As usual thanks in advance
Del

# Original Tiger in the internal HD, New Leopard in the external HD.
# New Leopard in the internal, Legacy cloned Tiger in the external.
# Split internal, one partition with Tiger, another with Leopard.
Leopard is backwardly compatible with older Macs, just make sure yours fulfills the minimum system requirements, both use the same filesystem format, so each can see the other. You can't run both at the same time, unless you purchase the server version of Leopard and run it virtualized. 99.9% of Firewire external HD's are bootable, some USB's are bootable but have to test first. You can choose which system to boot from by pressing the Option key at boot time, before the chime. Just make sure the external HDD is plugged in and turned on if that's where you want to boot from.
When I migrated my PBG4 from Panther to Tiger, got an external FW HDD, cloned Panther onto it, upgraded using Archive and Install, cleaned up, customized and tested it. When I was satisfied all was ok, cloned the original Panther onto another partition of the external HDD, wiped and tested for failure the internal HDD, then cloned the known good and tested Tiger into it. Only thing that died along the way was my old and ancient Photoshop v2.x, that refused to run on Tiger.

Tiger on MacBook Drive and Leopard w/BootCamp and Windows XP on External?

I currently have the latest version of Tiger installed on my MacBook's internal HDD (10.4.11) and I have an External USB HDD that has Leopard (I can't remember if it is the latest or not) installed on it.
I currently am using VMware Fusion in Tiger with a copy of Windows XP Pro, and I want to use BootCamp in Leopard to install Windows XP Pro so I can run it without it being inside a virtual machine. I already have a separate partition (currently FAT32) on the external reserved for the copy of Windows, and I thought that when I went to install using BootCamp, that it would then reformat to NTFS for me.
I think it still would do this, but I do not know for sure as BootCamp will not let me install Windows. It comes up with an error saying something like the BootCamp Assistant won't allow it to run off of an external HDD. Would this be that I have to have Leopard installed on one partition (at least) of my MacBook's internal HDD so that it can install Windows (on either the internal OR external HHD - in it's own partition)?
Is there any easy way to partition my MacBook's internal HDD without having to re-install Tiger during the partitioning (and maybe reformatting?) if I have enough space available on my HDD? I am still fairly new to Macs and I have yet had to do anything with reformatting/repartitioning and re-installing the OS, I have upgraded the OS (on my old G3 iBook), and I had done the separate Leopard install on the External HDD (as I didn't want to ger rid of Tiger and still use Tiger as my main OS, haven't been totally ready for the big switch).
I have cleared off lots of space on my HDD the past week, so I have about 47GB available on my 80GB drive. My external is a 100GB currently in 3 partitions - I think, Leopard installed with 37GB left available, 30GB for my Windows -blank, and I think I have a 10-15GB blank misc storage partition.
I have copies of all my documents and files from my MacBook on my network NAS, and I have copies of all applications installed on my NAS as well (the install files that is). So if needed I could reformat and partition and install various OS's where needed, but I would like to try and NOT have to do this just because my MacBook is now used as my main system (my windows desktop is not even hooked up and my windows laptop has been cleared so that I can try to sell it).
So I would like to at least keep my basic web browsers and other daily apps with info installed for use while trying to get stuff set up to use BootCamp to install Windows XP, but I can totally restart from a blank slate if needed.
I just need some help on exactly what I should do (where to find the "options" I need to change through Disk Utility, and what might be the easiest way (or order) to do these things in.
Any other comments or suggestions would be gladly appreciated, I look forward to getting my MacBook (along with an External USB HDD for added space) set up to run a full copy of Windows and finally let me get away from that dreaded OS (on a Windows specific PC). I stopped liking it back when my dad switched to Win 95 from Windows 3.1, and had much prefered DOS over Windows as well.
I just need to have access to it now and then for little things, and to play some of the (slightly older) games that I have that I do wish to play, but not on a system that makes me waste more time trying to fix/upgrade it/tweak it as I get to actually do ANYTHING on it.
So thanks in advance for any help and suggestions...

Hi,
sadly BootCamp does indeed not support the installation of Windows on external harddisks.
Mostly because Windows itself (courtesy of Microsoft) does not support this either.
There is one how-to, that claims to let you install Windows on an external harddisk, see here: http://tubeshards.wordpress.com/2006/12/05/install-windows-to-a-macintosh-usb-dr ive/
But as you can see, it is quite a hassle and not for the faint-hearted
If you don't want to go that way, your only choice is to install Leopard on your internal HD and use the external for Tiger.
Since you have a 'Windows' partition on your external HD, that is big enough, you can use it to clone your internal Tiger partition to that using SuperDuper or Carbon Copy Cloner and after verifying that the new Tiger partition is bootable, clone your Leopard from the external to the internal HD.
After both your OSXs are set and checked, you can then run the BootCamp Assistant from Leopard to install Windows on your internal HD.
And at last you can cleaar-up your external HD of everything you don't want/need anymore.
Regards
Stefan

Tiger and Snow Leopard on an external hard drive?

Hi,
I have a mini mac running tiger and I need to update my itunes and ipod touch which i cant currently do in tiger.
I dont want to upgrade my hard drive as most of my programs wont work with the update, eg. photoshop and dont want to buy a new photoshop package.
As i have a spare external hard drive, I was wondering if I could run leopard or snow leopard on that and update itunes that way, thus keeping tiger running on my mini mac, and have the option of which system to run. Is this possible?
Many Thanks.

Hi, yes you can, & with a big enough drive you could partition it for multiple bottable OSX Partitions.
Leopard requirements/10.5.x...
    * Mac computer with an Intel, PowerPC G5, or PowerPC G4 (867MHz or faster) processor
minimum system requirements
    * 512MB of memory (I say 1.5GB for PPC at least, 2-3GB minimum for IntelMacs)
    * DVD drive for installation
    * 9GB of available disk space (I say 30GB at least)
You have to call Apple & likely ask for a Product Specialist to get it, if they still have it! Helps to tell them you have an iPad/iPhone & you can't run 10.6.
List of Applications Not Compatible with Leopard...
http://guides.macrumors.com/List:Applications_Not_Compatible_with_Leopard
Snow Leopard/10.6.x Requirements...
General requirements
   * Mac computer with an Intel processor
    * 1GB of memory (I say 2GB at least)
    * 5GB of available disk space (I say 30GB at least)
    * DVD drive for installation
    * Some features require a compatible Internet service provider; fees may apply.
    * Some features require Apple’s MobileMe service; fees and terms apply.
Which apps work with Mac OS X 10.6?...
http://snowleopard.wikidot.com/
It looks like they might still have it...
http://store.apple.com/us/product/MC573Z/A?fnode=MTY1NDAzOA
If it's a core Duo & not a Core2Duo, then it'll only run in 32 bit mode.

Droplet Script used to work fine in Tiger and Leopard, now doesn't

Hey everyone,
I'd like to apologize in advance, I'm not really good with AppleScript and was only able to create my droplet in the first place by changing little bits of a Droplet example script I found on the internet (I forgot where I found it, but it might even have been here at Apple).
The script worked perfectly fine in Tiger and Leopard but throws an error in Snow Leopard. The error says "Can't make alias "...filepath... "into type file."
The problem is that I can't find the problem in my script. I don't get any indication which line it may be and I hope someone here will be able to help me.
I also tried Script Debugger, but the script works there! So that doesn't help either...
I'd appreciate any help, here is the script:
-- QuickTime supported image formats
property type_list : {"JPEG", "TIFF", "PNGf", "8BPS", "BMPf", "GIFf", "PDF ", "PICT"}
property extension_list : {"jpg", "jpeg", "tif", "tiff", "png", "psd", "bmp", "gif", "jp2", "pdf", "pict", "pct", "sgi", "tga"}
property typeIDs_list : {"public.jpeg", "public.tiff", "public.png", "com.adobe.photoshop-image", "com.microsoft.bmp", "com.compuserve.gif", "public.jpeg-2000", "com.adobe.pdf", "com.apple.pict", "com.sgi.sgi-image", "com.truevision.tga-image"}
-- This droplet processes files dropped onto the applet
on open these_items
repeat with i from 1 to the count of these_items
set this_item to item i of these_items
set the item_info to info for this_item
try
set this_extension to the name extension of item_info
on error
set this_extension to ""
end try
try
set this_filetype to the file type of item_info
on error
set this_filetype to ""
end try
try
set this_typeID to the type identifier of item_info
on error
set this_typeID to ""
end try
if (folder of the item_info is false) and (alias of the item_info is false) and ((this_filetype is in the type_list) or (this_extension is in the extension_list) or (this_typeID is in typeIDs_list)) then
processitem(thisitem)
end if
end repeat
end open
-- this sub-routine processes files
on processitem(thisfile)
-- NOTE that the variable this_item is a file reference in alias format
-- FILE PROCESSING STATEMENTS GOES HERE
tell application "Image Events"
launch
-- get the parent folder of the image file
set the parent_folder to the container of this_file
-- derive new name for the new image file
set the new_name to my addextension(thisfile, "png")
-- look for an existing file
if (exists file new_name of the parent_folder) then
error "A file named \"" & new_name & "\" already exists."
end if
-- open the image file
set this_image to open this_file
-- save in new file. The result is a file ref to the new file
set the new_image to save this_image as PNG in file new_name of the parent_folder with icon
-- purge the open image data
close this_image
end tell
end process_item
on addextension(thisfile, new_extension)
set this_info to the info for this_file
set this_name to the name of this_info
set this_extension to the name extension of this_info
if this_extension is missing value then
set the default_name to this_name
else
set the default_name to text 1 thru -((length of this_extension) + 2) of this_name
end if
return (the default_name & "." & the new_extension)
end add_extension

Here's the faulty line:
--open the image file
*set this_image to open this_file*
The command open doesn't return anything that could be assigned to the variable this_image.
I also wonder if it wouldn't be better to add “as alias” at the end of each of the following two lines:
*set this_info to the info for this_file*
*set the item_info to info for this_item*
I hope this help.

"Moving" Tiger and Leopard OS's from G4 (32b) to G5 (64b)

I plan to image Tiger (10.4) and Leopard (10.5) from my Power Mac G4 (Quicksilver 2002) to a recently acquired a Power Mac G5 (Early 2005). My questions are:
1. Tiger and Leopard were installed on a G4, a 32 bit processor, but the G5 is a 64 bit processor. Do I need to do anything after I’ve “installed” the G4 Tiger and Leopard on the G5 to have them function as 64 bit Operating Systems (a.they can detect which processor they are installed on automagically and don’t need my intervention OR b.I have to toggle something OR c.I have to reinstall one/both of the Operating Systems on the G5 for them to function as 64 bit Operating Systems)?
2. How can I tell if the OS is running as a 32 bit or 64 bit process?
TIA.

Hi Barubin,
I'm no expert on OS X's internals, but I believe Tiger and Leopard's kernel still is 32-Bit, but allows 32-64-bit bridging. In Leopard's Activity Monitor I can only find two apps running in 64-Bit mode:
usbmuxd
IIDCAssistant
The best way of getting 64-Bit is to upgrade to Snow Leopard on Intel, I'm afraid.
Your target-disk method or BDAqua's suggestions should work just fine, but I usually find hdiutil to be generally more reliable, plus I can keep around a system image for safety's sake. When I say reliable, I mean that you can always interrupt the image creation by using CTRL-C or check whether it is actually throwing any errors. The GUI has hung on me on occasions. I also love UNIX, which helps!
I've never done a speed comparison between Disk Utility and its CLI counterparts, but I like the verbosity/flexibility provided by the CLI. It's a matter of taste, really. If you're not comfortable using the CLI, stick to the other options.
The purpose of asr -imagescan (asr stands for Apple Software Restore), is to rebuild the target image and replace it with a checksummed and reordered (optimised) version, so it can then be verified against the contents of your target volume after you're restored the data. Also, scanning the image allows you to do a block restore, which is effectively a blazingly fast blind copy. In a matter of minutes you can easily restore 15 GB of data into your chosen volume, as opposed to not scanning it with asr or Disk Utility and the restore operation defaulting to a normal image mount --> data copy operation, which is slow and inefficient. It's a tradeoff really. You can wait for ages restoring, or creating the image
I rather wait for image creation since it's the safest and cleanest option data-wise.
Check out:
$ man asr
$ man hdiutil
I'm confident it will all work just fine with your heart transplant!
Cheers

List of sysctl add/del/changes between Tiger and Leopard

I've ran a quick diff between the sysctl values in Tiger and Leopard. Note: This is from two different macbook's, so some values may be changed due to hardware.
This should give folks an idea as to what buffer sizes, performance tweaks, etc. have been added.
If you're real bored, I guess you could revert everything network related back to Tiger values ... but, yeah, good luck with that. You may break more than you fix.
Most of these you can lookup on-line or in the kernel source to see what they do. Sometime in the next week or so I'll add descriptions if you don't have a network background or src code background.
Removed
T debug.net80211: 0 0
T net.athCCAThreshold: 28 28
T net.athaddbaignore: 0 0
T net.athaggrfmax: 28 28
T net.athaggrqmin: 1 1
T net.athbadrxbuf: 0 0
T net.athbadrxdesc: 0 0
T net.athbgscan: 1 1
T net.athdupie: 1 1
T net.athforceBias: 2 2
T net.athforcebadrx: 0 0
T net.athpowermode: 0 0
T net.athppmupdate: 1 1
T net.athvendorie: 1 1
T net.inet.tcp.delacktime: 50
T net.pstimeout: 20 20
Changed
T net.link.generic.system.ifcount: 11
L net.link.generic.system.ifcount: 7
T net.inet6.ip6.fw.debug: 1
L net.inet6.ip6.fw.debug: 0
T net.inet.ip.fw.debug: 1
L net.inet.ip.fw.debug: 0
T net.inet.ip.fw.one_pass: 1
L net.inet.ip.fw.one_pass: 0
T net.inet.ip.fw.static_count: 12
L net.inet.ip.fw.static_count: 1
T net.inet.ip.maxchainsent: 0
L net.inet.ip.maxchainsent: 45
T net.inet.ip.rtexpire: 10
L net.inet.ip.rtexpire: 140
T net.inet.tcp.blackhole: 2
L net.inet.tcp.blackhole: 0
T net.inet.tcp.keepidle: 144000
L net.inet.tcp.keepidle: 7200000
T net.inet.tcp.keepinit: 1500
L net.inet.tcp.keepinit: 75000
T net.inet.tcp.keepintvl: 1500
L net.inet.tcp.keepintvl: 75000
T net.inet.tcp.localslowstartflightsize: 4
L net.inet.tcp.localslowstartflightsize: 8
T net.inet.tcp.loginvain: 3
L net.inet.tcp.loginvain: 0
T net.inet.tcp.msl: 600
L net.inet.tcp.msl: 15000
T net.inet.tcp.sendspace: 32768
L net.inet.tcp.sendspace: 65536
T net.inet.tcp.sockthreshold: 256
L net.inet.tcp.sockthreshold: 64
T net.inet.tcp.pcbcount: 41
L net.inet.tcp.pcbcount: 38
T net.inet.tcp.recvspace: 32768
L net.inet.tcp.recvspace: 65536
T net.inet.udp.blackhole: 1
L net.inet.udp.blackhole: 0
T net.inet.udp.loginvain: 3
L net.inet.udp.loginvain: 0
T net.inet.udp.pcbcount: 44
L net.inet.udp.pcbcount: 16
Added
L kern.netboot: 0
L net.inet.ip.random_id: 1
L net.inet.ip.dummynet.debug: 0
L net.inet.tcp.backgroundioenabled: 1
L net.inet.tcp.backgroundiotrigger: 5
L net.inet.tcp.ecninitiateout: 0
L net.inet.tcp.ecnnegotiatein: 0
L net.inet.tcp.inswcksum: 2806591
L net.inet.tcp.insw_cksumbytes: 1244150487
L net.inet.tcp.maxseg_unacked: 8
L net.inet.tcp.outswcksum: 4438883
L net.inet.tcp.outsw_cksumbytes: 4483972145
L net.inet.tcp.rexmt_thresh: 2
L net.inet.tcp.rfc3465: 1
L net.inet.tcp.rtt_min: 1
L net.inet.tcp.socketunlocked_onoutput: 1
L net.inet.tcp.winscalefactor: 3
L net.inet.udp.inswcksum: 5697
L net.inet.udp.insw_cksumbytes: 721922
L net.inet.udp.outswcksum: 4899
L net.inet.udp.outsw_cksumbytes: 445568
L net.inet6.ip6.fw.enable: 1
L net.link.ether.inet.keep_announcements: 1
L net.link.ether.inet.sendconflictingprobes: 1
L net.link.ether.inet.sendllconflict: 0
L net.link.generic.system.dlilinput_sanitycheck: 0
L net.link.generic.system.multithreadedinput: 1
L net.smb.fs.loglevel: 0
L net.smb.fs.tcprcvbuf: 131072
L net.smb.fs.tcpsndbuf: 131072
L net.smb.fs.version: 104000

Hey there,
I believe I'm having the same issue. I'm using Mail.app in 10.5 with a gmail account (IMAP). The issues is that in Tiger we had the IMAP option in the account settings "Advanced" tab to: "Automatically synchronize changed mailboxes." This option appears to be missing, and even more, does not happen in Leopard. What this means is that changes to folders (other than one's that you explicitly open/synchronize manually, will not shows updates in Leopard.
This is especially annoying with the "All Mail" (Archive) folder for Gmail IMAP in Leopard. In order to ensure that your "All Mail" is always up to date, you have to manually open it (to initiate a sync). Otherwise it does not auto update like it does in Tiger.
Thanks,
Shahrum

Mail app on Tiger and Leopard no longer bring in mail from non-apple servers

My husband's computers use Tiger and Leopard (10.5.8) to access his email on the Mail program. His mail is from Comcast and uses the Comcast server, not apple or iCloud. His mail suddenly stopped working a couple of days ago.....as it did on one of my machines that still uses Tiger. He had not done any updates that could have broken the software. He does not have iCloud except on his phone and he doesn't even have a .mac address. There is no reason for the comcast server to not be able to be accessed by Mail app.
He did finally update everything that needed it and it still does not work. Why would Apple's change over to iCloud break email access from other servers and how can we fix it. He really doesn't want to do his mail on Comcast's web site as it's slow and awkward.
Thanks for any help you all can offer.
Paula

Thank you for answering.
I know it shouldn't have been able to stop those accounts from working on the Mail app but it did.Out of 4 machines, 3 stopped working at the same time. The 4th is on Snow Leopard and continues to get my Comcast mail. But the one Tiger machine and 2 Leopard machines no longer access any mail from any server. Shouldn't be possible, but it happened.
I don't want to delete accounts because I don't want to lose the old email in the different folders on there and the software is acting so bizarrely, I know the mail would be lost.
I checked all the settings and compared them to the one on Snow Leopard that still works. The settings are all the same. The only difference is the OS.
And to make things more frustrating, I found that several entries in my Contacts book were either deleted or scrambled with phone numbers for person A in the entry for say, person C. I mean it's a real mess and this all happened after I got a notice from Apple that they were shutting down all their mobile me stuff and sending everything to iCloud. Syncing is obviously a mess now and I don't even want my stuff sync'd there. My husband has never even signed up for iCloud but since he has an iTunes account, thus an Apple acct, they appear to have automatically put him on iCloud too. And....mail quit working unless he gets it on his iPad or iPhone.
We're fed up with Apple's insistence on total control of it's customers' previously working equipment. We have no desire to upgrade to Lion or it's next iteration. We have been happy with what we have and asked only that it continue to just WORK.
It's become a rotten Apple in the past few years. We've been with them a long time but we're watching other companies closely for something that will do what we need without the draconian control.
I have a feeling the only way to "fix" Mail.app is to upgrade to Lion and we won't be doing that.
Thanks again.

Tiger and Leopard on the Same MacBook?

I have a MacBook and would like to have both Tiger and Leopard on it. I Googled and found info that did not work for my "newer" machine. I purchased two months ago. I have a number of files that are Tiger only and will not be rewritten for Leopard. Can anyone offer a possibility of doing this for the newer machines!?!?!

To boot two different OS X versions, you need to have each version installed on a different bootable Volume. This can be on different partitions on the same drive, or on different drives, i.e. the internal and an external FW drive.
(Mac OS X and OS 9 can be on the same partition or drive for the older OS 9 bootable machines)
This is very useful when upgrading a Mac to a new OS, then you can perform the installation on a new drive and keep your old drive in tact, allowing you to boot the old and new OS version and access files from both drives.
However, when a Mac ships with a particular OS version, most of the time you can not downgrade to an older OS version.

FCE 2 and Tiger and iLife 05 or Leopard and iLife 08? on G5 Power Mac 2.5

I want to do basic and advanced editing with my FCE 2
I have Quicktime pro and Apple TV and Airport Extreme Base Station that I am about to hook up and integrate with my computer and Television.
Should I leave well enough alone with my Tiger and iLife 05 or should I install a full version of Leopard and iLife 08
I'm thinking I need the Leopard and 08 for the Apple TV and Airport Extreme Base Station.
Should I go ahead and put the Leopard and 08 and Quicktime Pro and UPGRADE to FCE 4, I can do this?
But will my old 2004 G5 2.5 Dual handle all this.
I could as easily stay with Tiger and FCE 2 and 05 except for the Apple TV and the Extreme Base Station.
Sorry I'm so long. I'm totally confused?

I'm one of the ones that got hurt really bad when Apple went from the G5 to Intel
I paid $3500 in Dec 2004 for what I thought was going to be the center of a Recording and Video Studio for music Video's and Documentaries.
I lost three years due to health matters and my Applecare expired Dec 2007
I'm trying to recover and start filming and recording.
I know that I will have to go with a new Intel PowerMac 8 core to run Final Cut Studio 2 beginning one year from now. I can't afford it now.
I'm trying to buy stuff that will work with the new Intel and my old G5 for now.
I bought the AirPort Extreme (802.11n) and an Apple TV in September to integrate with my new Panasonic Plasma 42" High Definition TV and a ONKYO 7.1 Home Theater System. $900 for the TV and $300 for the ONKYO
I bought a Canon HV20 High Definition and Standard Definition Camcorder to film with.
I want to shoot and film and edit sound and video on my current Mac until I get the newer computer and software that I am going to need to accomplish my goal of near professional quality in all facets. So this is the first step. I will be able to run all this stuff but compatibility issues are killing me because of the G5 Intel Changeover.
The learning curve I am trying to lessen by getting as near as I can to what next year will be fully modern and state of the art Apple Equipment and Software instead of piecemeal like I'm doing. I'm trying to lesson my losses the best I can and get this thing going without losing any more valuable time. I am 63 years old and couldn't set a watch seven years ago. It has taken me this long to get somewhat of a handle on what I knew was unimagined capability for a common man with all this new technology.
I bought the Leopard thinking I needed it. I can not use it and resell it pretty easily. I have no tech support, I'm trying to get this thing to work.

Booting tiger and leopard separately

I installed Leopard as an upgrade two months ago and find I don't use it. Until today, I decided to try it again. Everything in desktop, documents and itunes is out of sync. It's all left where it was two months ago. How can I install the latest tiger profile onto leopard?
Thanks.

Moving from Leopard to Tiger is not "moving up", it's a downgrade to an older version and thus is "moving back."
I don't think that's what the OP means: he said 'How can I install the latest tiger profile onto leopard?', meaning, how can he get his most recent files onto the partition or drive that runs Leopard.
Chris: if you're prepared to abandon Tiger, then the easiest way is to apply the Leopard update to the Tiger partition/disk, doing an upgrade and not an install.
Otherwise you can use Migration Assistant, accessed within the Leopard system, to migrate files and folder and the user from the other drive: you should read the Help very carefully to make sure you understand what you are doing before you begin.

Installing Tiger AND Leopard

Help! My macbook pro has been acting funky.
1. It won't let me install updates because it can't find the folder "/".
2. Every time I launch word, it thinks it's the first time.
3. Front row thinks I'm not connected to the internet when I clearly am.
The guy at the genius bar suggested re-installing the OS that came with the mac (Tiger) and then my current OS (Leopard). Everything is supposedly backed up with Time Machine. If I put the original OS Tiger CD in, will everything be wiped out? I'm a little nervous about the whole thing.
Can somebody please help? Thank you!
Jolivet

The first thing I'd try is a Leopard archive and install (after repairing the folder permissions and verifying the disk with Disk Utility). That will not erase your data.
Can you explain why the genius suggested you install Tiger first?
If you can't archive and install, then the next option would be to install Leopard with an erase and install. That will definitely erase your data (it erases you hard disk), so all you have left if your Time Machine backup. When you fist start up the Mac with the new Leopard you should plug in your Time Machine backup disk and when asked, specify that you want to restore from a Time Machine backup.
Message was edited by: deh2k

Leopard vs tiger and filemaker 9

Similar Messages

Maybe you are looking for