Leopard won't work for me: what Tiger package should I buy?

I was holding out for a Leopard upgrade but my imac g-4 is too old to run with the new cat. Now I see that Apple is withdrawing Tiger and I'm going to have to buy the software elsewhere. Can you please advise me on which package to buy? All pages with Tiger system requirements now link to Leopard pre-sale pages.
My imac is running on 10.2.8 and has 256 MB of memory.
I have a non-Mac memory card that I can install but also need to know if this is advisable.
Thanks in advance for your guidance.
kever

You need to buy a retail Tiger package. The install DVD will be black coloured with a big X on it. Don't buy any grey coloured Tiger install discs. These would have shipped with a new Mac and would likely not work on your Mac. Also don't buy any black Tiger DVD that says "Upgrade" on it. These discs require that you have OS X 10.3 installed on your Mac to work.
If your iMac does not have a DVD drive, you will either need to get an external FireWire DVD drive (not USB) to install it, or you will need to get the Tiger CD set. This used to be available at AppleRescue, which seems to have gone under now. Check eBay for it.
You should still be able to get Tiger at any computer retailer that sells Macs. If you wait until after October 26th you should be able to find Tiger for a substantial discount buy buying it second hand at places like eBay.

Similar Messages

  • TS1538 Hi, I have the problem which iTunes cannot detect my iPhone 4s. I tried the steps you have provided in your troubleshooting, but it won't work for me because the Apple Mobile Devilce is perfectly installed on my windows.

    Hi, I have the problem which iTunes cannot detect my iPhone 4s. I tried the steps you have provided in your troubleshooting, but it won't work for me because the Apple Mobile Devilce is perfectly installed on my windows. However, the driver "Microsoft teredo Tunneling adapter" has a yellow exclamation mark, which i believe means it's not installed correctly or something is wrong with it. This driver is under the Network Adapters (Please see picture below).
    This is what happens when I connect my iPhone 4s to my laptop (Windows 7 Starter 32-bit)
    1. The phone charges it's battery
    2. I can open it in My Computer and import/export media files.
    In iTunes
    3. It start to sync until step 3 then stops.
    4. The iPhone option with an arrow appears beside the iTunes Store, but when the arrow is clicked it disappears.
    I hope you can provide me a solution for this problem.
    Thanks,
    Ralph

    Hi ralphagir,
    Welcome to the Apple Support Communities!
    For your iTunes issue with it not recognizing your iPhone, I would go ahead and suggest deleting iTunes and all of its components from your Windows computer and installing fresh.
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
    http://support.apple.com/kb/HT1923
    Remove iTunes and related components from the Control Panel
    Use the Control Panel to uninstall iTunes and related software components in the following order and then restart your computer:
    iTunes
    Apple Software Update
    Apple Mobile Device Support
    Bonjour
    Apple Application Support (iTunes 9 or later)
    Important: Uninstalling these components in a different order, or only uninstalling some of these components may have unintended affects.
    As far as the arrow button that you click and the iPhone disappears, it sounds like you may be clicking on the eject button. Please take a look at the following article for information on the eject button in iTunes.
    Safely disconnect iPod
    http://support.apple.com/kb/HT1853
    Have a great day,
    Joe

  • TS3988 I changed my Apple ID to my new email address successfully for the iTunes and App store but it won't work for iCloud and it won't recognize my password. I read that this can't be done. How am I supposed to get into iCloud?

    I changed my Apple ID to my new email address successfully for the iTunes and App store but it won't work for iCloud and it won't recognize my password. I read that this can't be done. How am I supposed to get into iCloud? I plan on getting rid of my old email address which is my old Apple ID so how is that going to work?

    Same question Wish someone had replied!
    I changed my Apple ID to my new email and now cannot find any way to access icloud. Unfortunately I had allowed icloud to hijack my airbook files, so of course I am afraid I will lose them tomorrow when I exchange my iphone for a new one and cannot keep an icloud account i cannot access. What a poor sync system! Really atypical for apple!

  • Can't create new pdfs from powerpoint; either form within Adobe or within powerpoint.  I could do this yesterday and today it won't work for some reason.  The error says "an unexpected error occurred.  PDFMaker was unable to produce the Adobe PDF.  How do

    Can't create new pdfs from powerpoint; either form within Adobe or within powerpoint.  I could do this yesterday and today it won't work for some reason.  The error says "an unexpected error occurred.  PDFMaker was unable to produce the Adobe PDF.  How do I fix this?

    Is there a log file in the document folder indicating what the problem was. There are a number of reasons that PDF creation may fail. You can try to print to the Adobe PDF printer to see if there is any indication in that process. The processing is different, but the same problems may show up with both processes.

  • Updated to Yosemite, no problem.  now iPhoto and iMovie won't open.  Says I need to update software however, when i try to update indicates my User ID and PW won't work for these two pieces of software.  User ID and PW works everywhere else.

    Updated to Yosemite, no problem.  now iPhoto and iMovie won't open.  Says I need to update software however, when i try to update indicates my User ID and PW won't work for these two pieces of software.  User ID and PW works everywhere else.

    I am having the same problem.  I even changed my password and updated all of my security information.  Now it just gives me an error and retry message, which of course also does not work.  Went to support and was going to open a chat (seemed the simpler option) and received a message that my support has expired for this serial number unless I want to pay $29.00.  So I chose the option to call later, which was the exact time suck I was trying to avoid.  Why wouldn't the new operating system also update the apps that were already part of my old platform?

  • My wireless keyboard won't work for one of the users

    All of a sudden the wireless keyboard stopped working for me, but it works when my wife logs in.  I had to create a new account for myself and the keyboard now works.  However, the keyboard won't work for my original account. Any thoughts?

    Does it shows up as a device in your BT menu under the problematic user? Does it connect? If you delete it from your admin account and re-pair it, does it work?
    There is a command called ioreg, which can help as well.
    Here is sample output from ioreg -lw0 | grep -i keyboard
          |   | +-o AppleBluetoothHIDKeyboard  <class AppleBluetoothHIDKeyboard, id 0x10000372d, registered, matched, active, busy 0 (4 ms), retain 10>
          |   |   |   "Product" = "BT-Keyboard-AL-i71"
          |   |   |   "PoweredOffNotificationType" = "KeyboardOff"
          |   |   |   "CFBundleIdentifier" = "com.apple.driver.AppleBluetoothHIDKeyboard"
          |   |   |   "IOClass" = "AppleBluetoothHIDKeyboard"
          |   |   | |   "Product" = "BT-Keyboard-AL-i71"
          |   |   | +-o AppleEmbeddedKeyboard  <class AppleEmbeddedKeyboard, id 0x100003734, registered, matched, active, busy 0 (0 ms), retain 10>
          |   |   |   |   "IOClass" = "AppleEmbeddedKeyboard"
          |   |   |   |   "HIDDefaultBehavior" = "Keyboard"
          |   |   |   |   "Product" = "BT-Keyboard-AL-i71"
          |   |   |   |   "FnKeyboardUsageMap" = "0x00070050,0x0007004a,0x00070052,0x0007004b,0x0007002a,0x0007004c,0x0007004f,0 x0007004d,0x00070051,0x0007004e,0x00070028,0x00070058"
          |   |   |   |   "NumLockKeyboardUsageMap" = "0x00070029,0x00070029,0x0007002a,0x0007002a,0x0007002b,0x0007002b,0x0007003a,0 x0007003a,0x0007003b,0x0007003b,0x0007003c,0x0007003c,0x0007003d,0x0007003d,0x00 07003e,0x0007003e,0x0007003f,0x0007003f,0x00070040,0x00070040,0x00070041,0x00070 041,0x00070042,0x00070042,0x00070043,0x00070043,0x00070044,0x00070044,0x00070045 ,0x00070045,0x0007004a,0x0007004a,0x0007004b,0x0007004b,0x0007004c,0x0007004c,0x 0007004d,0x0007004d,0x0007004e,0x0007004e,0x0007004f,0x0007004f,0x00070050,0x000 70050,0x00070051,0x00070051,0x00070052,0x00070052,0x0007000d,0x00070059,0x000700 0e,0x0007005a,0x0007000f,0x0007005b,0x00070018,0x0007005c,0x0007000c,0x0007005d, 0x00070012,0x0007005e,0x00070024,0x0007005f,0x00070025,0x00070060,0x00070026,0x0 0070061,0x00070010,0x00070062,0x00070037,0x00070063,0x00070082,0x00070082,0x0007 00e0,0x000700e0,0x000700e1,0x000700e1,0x000700e2,0x000700e2,0x000700e3,0x000700e 3,0x000700e4,0x000700e4,0x000700e5,0x000700e5,0x000700e6,0x000700e6,0x000700e7,0 x000700e7"
          |   |   |   |   "CFBundleIdentifier" = "com.apple.driver.AppleHIDKeyboard"
          |   |   |   |   "HIDEventServiceProperties" = {"HIDKeyboardModifierMappingPairs"=()}
          |   |   |   +-o IOHIDKeyboard  <class IOHIDKeyboard, id 0x100003737, registered, matched, active, busy 0 (0 ms), retain 9>
          |   |   |   | |   "HIDKeyboardRightModifierSupport" = Yes
          |   |   |   | |   "HIDKeyboardKeysDefined" = Yes
          |   |   |   | |   "Product" = "BT-Keyboard-AL-i71"
          |   |   |   | |   "HIDKeyboardCapsLockDoesLock" = No
          |   |   |   | |   "HIDKeyboardSupportedModifiers" = 33431807
          |   |   |   | |   "HIDResetKeyboard" = Yes
          |   |   |   | |   "HIDParameters" = {"HIDKeyboardModifierMappingPairs"=()}
          |   |   |   | |   "HIDKeyboardModifierMappingPairs" = ()

  • Front face camera won't work for pictures. But it works perfectly on FaceTime, any way of fixing this?

    Front face camera won't work for pictures. But it works perfectly on FaceTime, any way of fixing this?
    When I try and change the camera to face front it acts like it's going to change then kind of freezes and won't let me change back to the back camera for several minutes.
    Any ways of fixing this?

    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings      
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                 
    iOS: How to back up                             
    - Restore to factory settings/new iOS device.
    If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar                       

  • I just created an apple id/account and it won't work for itunes

    I just created an Apple id/account and it won't work for itunes

    Received an email:
    our Apple ID, xxxxxx, was just used to download iBooks from the App Store on a computer or device that had not previously been associated with that Apple ID.
    If you initiated this download, you can disregard this email. It was only sent to alert you in case you did not initiate the download yourself.
    If you did not initiate this download, we recommend that you go toiforgot.apple.com to change your password, then see Apple ID: Security and your Apple ID for further assistance.
    Regards,
    Apple

  • My photoshop elements and Lightroom serial numbers won't work for my new mac. I bought these softwares via download on my windows laptop but returned that laptop because the quality was not great. I decided to buy a mac and now can't use my serial numbers

    my photoshop elements and Lightroom serial numbers won't work for my new mac. I bought these softwares via download on my windows laptop but returned that laptop because the quality was not great. I decided to buy a mac and now can't use my serial numbers to download the software.

    Moving this discussion to the Downloading, Installing, Setting Up forum.
    Stephylei you will want to download the Mac versions of the installation files.  If you purchased the software from Adobe, and choose the download option at the time of purchase, then the download will be available under your account.  You can find more details at Find a download link on Adobe.com.

  • The serial number I have won't work for my Photoshop  lightroom

    the serial number I have won't work for my Photoshop  lightroom

    COntact support if you have serial number issues. This is not handled via the public forums.
    Mylenium

  • Flash Player 12 won't work for me

    I downloaded Adobe Flash Player 12 from Adobe site.  I have IE and Windows 7 Premium.  Computer tells me Flash Object is installed and it is enabled. It won't work for me.  Adobe help page says it is either not installed or enabled, but my computer says otherwise.  Can you help me get this thing running?

    IE 11?

  • TS3274 Sound won't work for games

    THe sound won't work for games unless I plug In headphones. The setting shows like the sound is on.

    If you lose sounds for keyboard clicks, games or other apps, email notifications and other notifications, system sounds may have been muted.
    System sounds can be muted and controlled two different ways. The screen lock rotation can be controlled in the same manner as well.
    Settings>General>Use Side Switch to: Mute System sounds. If this option is selected, the switch on the side of the iPad above the volume rocker will mute system sounds.
    If you choose Lock Screen Rotation, then the switch locks the screen. If the screen is locked, you will see a lock icon in the upper right corner next to the battery indicator gauge.
    If you have the side switch set to lock screen rotation then the system sound control is in the task bar. Double tap the home button and in the task bar at the bottom, swipe all the way to the right. The speaker icon is all the way to the left. Tap on it and system sounds will return.
    If you have the side switch set to mute system sounds, then the screen lock rotation can be accessed via the task bar in the same manner as described above.
    This support article from Apple explains how the side switch works.
    http://support.apple.com/kb/HT4085

  • I have an Airport Express and the pass code I used some time ago for my IPad won't work for my new IPhone 5S?

    I have an Airport Express and the pass code I used some time ago for my IPad won't work for my new IPhone 5S?

    If you are sure that you are entering the correct password, then this sounds like an iPhone issue, so your best bet will be to post in the iPhone Support Community so that the experts over there can help.
    Using iPhone
    The best that we can do here is suggest that you start with the iOS support document Troubleshooting Wi-Fi Networks and Connections.
    Resetting the iPhone took care of an issue like this with my wife's iPhone.
    http://support.apple.com/kb/TS1398

  • HT5278 i did this update and now the volume on my phone doesn't appear when i push the buttons on the side of the phone. occasionally i see them, but my speakers won't work for playing videos or music either. it does ring when i receive a call though! ne1

    i did the ios5.1.1 update and now the volume on my phone doesn't appear when i push the buttons on the side of the phone. occasionally i see them, but my speakers won't work for playing videos or music either. it does ring when i receive a call though, and for my alarm. ne1 else had these problems?

    I have had this happen to me on 3GS, 4 and 4s.   Usually the solution is one of the following:
    1-  If  your volume indicator says  headphones even though they are not plugged in, then:
    Stick your headphones into the headphone jack and then remove quickly.
    2. If that does not work Power your phone off. Then when restarting Reset the phone by pressing the home button and the power button at the same time until the apple logo appears.
    3. Make sure you have not chosen to send audio to an Airplay device such as Apple Tv.
    Hope one of these works for you

  • I bought macbook air in feb 2013. if it is fully charged it only works for 3 hours while it should work for 7 hours. i have selected allow application from anywhere. does it affects ?

    i bought macbook air in feb 2013. if it is fully charged it only works for 3 hours while it should work for 7 hours. i have selected allow application from anywhere. does it affects ?

    vishalss180 wrote:
    should i change the battry ??
    No need to change the battery.
    vishalss180 wrote:
    i have selected allow application from anywhere. does it affects ?
    No.
    Maximize Runtime / Tips for maximizing your battery charge
    http://support.apple.com/kb/HT1446
    http://support.apple.com/kb/TS1473
    A new Mac comes with 90 days of free tech support from AppleCare.
    AppleCare: 1-800-275-2273

Maybe you are looking for

  • FICO: Asset Accounting : Retirement

    Dear Friends, Can someone share the asset disposal posting for the below scenarios. 1 . Asset disposal end of its life with customer with gain or loss 2 . Asset disposal mid of its life with customer with gain or loss 3 . Asset disposal end of its li

  • I am receiving an email saying my account is overdue and cannot access my bill.

    To whom it may concern, I recently switched to another carrier for my cellular service. I have been waiting for my final bill in the mail to pay it, however I haven't received one yet. Two days ago I got an email saying my account is overdue to pay i

  • Can you advise the process to clear down the table(REGUH-payment table)

    Can you advise the process to clear down the table(REGUH-payment table)

  • ClassNotFoundException...works in JSP???

    I have a JSP page that for now is doing validation of a user logging in. This works fine...checks the data against the db and redirects to a page based on whether valid or not. I have built a servlet(better way I assume) to do this now. I am getting

  • Initializing an ADC

    Hi There, I am trying to do something that is very much simple to do in C, but since I dont have much experience in LABVIEW, I am loosing so many precious hours. Here is what I want to do. I have two sections of the code as the way I wanted. Its just