LEP List of Effective Pages

I've seen some discussions of LEP by nowhere does it explain what LEP is or why one would want to use them. Can anyone enlighten me?

Just to add a little more information...
The List of effective pages is a way to check that a loose-leaf document is up-to-date. In a loose-leaf document it is common practice to provide updates as incremental revision packages. There will usually be a revision incorporation notice which gives instructions about the pages that are to be replaced or discarded. After the revision package has been incorporated the document should be checked page-by-page against the new list of effective pages to ensure that everything is at the correct revision state.
I also found it essential when the binding on an 800 page manual broke on a windy airfield...
Ian

Similar Messages

Can FrameMaker Automatically create a List of Effective Pages and Track Revision Number?

I see that FrameMaker will provide vertical lines automatically in updated content when set up to track changes. It also will create TOC's and Indexes.
What I need is a way to also work with a List of Effective pages and Page Revision Numbers. I have been researching different programs for maintaining aviation manuals and this is a key area that I need to work out.
Any thoughts on this subject would be appreciated.
Thanks

See Steve Kubis's LEP Tools plug-in at SiliconPrairie Software:
http://www.siliconprairiesoftware.com/Products.html

Help with List of Effective Pages Framemaker 10

I have been pulling my hair out for two days trying to figure this out.
I am creating a List of Effective Pages for a multi-chapter book. I am getting everything I need on the LOP, but it is not displaying the way I need
it to.
This is what I have:
AIRSPEEDS
Aug/2011
AS-1
Rev 0
Aug/2011
AS-2
Rev 0
I would like it to display like this
AIRSPEEDS (this would be a Header in BOLD), then underneath
AS-1 Rev 0 Aug/2011
I was thinking about the Run_In-Head, but either that is incorrect, or I am not using it properly. Any help would be greatly appreciated! Thank you in advance.

Can you login as the Hidden admin account and then run the installation,
http://www.howtogeek.com/howto/windows-vista/enable-the-hidden-administrator-account-on-wi ndows-vista/

How do I get more effects in my action box? I am only showing a few, like BOTTOM BORDERS, LOSE WEIGHT AND SPECIAL EFFECTS. That is all. The turotials I've checked into all show a long list of effects in the actions box. If anyone could help, I appreciate

How do I get more effects in my action box? I am only showing a few, like "Bottom Borders, Losing Weight, Resize and Crop, and Special Effects. And they do not list but a few effects. When I have watched the tutorials, they are showing a long list of effects in the action box. (with a side space bar) I do not. When I have clicked on the little arrow at top, and clicked "Load Actions", a box comes up, but it is blank,saying "no items match your search". I'm lost! If someone could help, it would be much appreciated! I would like to start using this.
Thank you.

Apple Computer Customer Relations:
1-512-674-2500

I'm wanting to use the "Actions" in Photoshop Elements 11. But when I get the Actions box up, it is only showing a small list of effects to use. And no side bar to go any further. When I click on the little arrow at top and then click on "load actions"

I'm wanting to use the "Actions" in Photoshop Elements 11. But when I get the actions box up, it is only showing a small list of effects to use. And no side bar. So I can't go any further. When I click on the little arrow at top and click on "load actions", I am only getting a box with empty space saying "No items match your search". The folder at the top does say "Actions". How do I get more effects? The tutorials that I've checked into all show a long list of effects in their box. Can anyone help?

To use the existing actions, try the following:
1. Open one of the Action Sets, in this example Special Effects is the Action Set, by pressing the small arrow beside the set name.
2. Then click on the name of the Action, in this example Faded Ink is the Action name.
3. Then press the Play button to run the action.

How do you disable the automatic list detection in Pages 5?

How can you disable or deselect the automatic list detection in Pages 5? I want to stop the auto numbering.

Menu > Pages > Preferences > General > Editing: uncheck Automatically detect lists
Peter

Prevent Occurence of list header and page breaks in spool file of ALV Grid

Prevent Occurence of list header and page breaks in spool file of ALV Grid Display.
When we run the ALV in background and create spool request then:
Spool file output is coming like this.
Column1 Column2 Column3 Column4
data        data        data       data
data        data        data       data
data        data        data       data
Column1 Column2 Column3 Column4
data        data        data       data
data        data        data       data
data        data        data       data
But the required is like this
Column1 Column2 Column3 Column4
data        data        data       data
data        data        data       data
data        data        data       data
data        data        data       data
data        data        data       data
data        data        data       data
Please suggest a posible answer

Hello all,
if you have not yet solved this on your own, here is my solution: use a format type that has 60000 lines per page for your spool output device.
It all depends on the format type that was used for creating the spool output.
By default (in our system), we have 65 lines per page. And after each page the column headings of the ALV will appear.
What i did:
create a new format type via transaction SPAD->full administration->device types->format types (copy an existing one)
change"Number of Rows" to 60000 or something applicable
edit the device type of your output device (e.g. LOCL) to contain the newly created format type (via SPAD; Button "Formats" in device type maintenance).
That's it! Be sure to use this format type for your output device in the "Background Print Parameters" window (-> Button "Properties").
Regards
Daniel Klein
All other parameters you discussed before didn't do it. All ALV-Settings will be overwritten by the output device settings and its print properties.

How to remove a list from a page ?

I added a list to a page and then later decided it would be easier to add the list to page 0. Now I can't find how to remove the list from the page.
Edited by: Rene W. on Oct 6, 2008 1:52 AM

Ok sorry I understood you wrong then.
I tried to recontruct your problem and did the following things.
1. Created a new list in: Home>Application Builder>Application 305>Shared Components>Lists>Create / Edit List
2. Created a new region on page 2: Home>Application Builder>Application 305>Page 2>Create Region Type: List, Name:"test1"
3. Created a new region on page 1: Home>Application Builder>Application 305>Page 1>Create Region Type: List, Name: "test2"
4. Deleted region "test1" on page 2
5. List and region still survived on page 1. :D
Tobias

Adjustment Brush - Full list under Effect not appearing.

Hi, 'am a new user of LR3.2 running on iMac and on Macbook Pro. On my iMac I was able to see the full list of Effects for Adjustment Brush but for the last couple of days I only see top half of the choices i.e., from Exporsure to Color and the bottom half choices i.e., from Burn to Teeth Whitening are not visible. However, LR3.2 on my Macbook Pro is running fine and shows all the choices. Would appreciate if anyone has any suggestion / solution to my above problem.

gummybear (I like the nick ),
The second half of "Effects" you see in the dropdown are custom created Local Adjustment Presets, which do not seem to be present on both of your machines.
Go to Preferences (Presets tab), and click on "Show Lightroom Presets Folder ...". This will lead you to the lightroom presets folder in finder. Within the LR presets folder, you'll see a folder called "Local Adjustment Presets", in which the custom built presets can be found. Copy those of your iMac to your Macbook Pro.
You could also try clicking on "Restore Local Adjustment Presets" first, but this will not restore Local Adjustment Presets you might have created yourself, just the ones shipped with LR3.2.
Beat Gossweiler
Switzerland

Displaying cascading list in the page

Hi
I have a cascading parent child list of Country , City , World.
I want to display the world list on the page using some webpart. I want that there should be two drop downs and when the Country and city are selected from that drop down then the list item should be displayed .
For eg.
If I select India and Delhi then the list item should be displayed for the same.
Vij

Hi Vij, Romeo's solution will work inside the form, but I think you might be talking about adding the dropdowns to the page itself where the list is, then I suggest the html web part. See the following link for information on how to set it up:
https://support.office.com/en-ie/article/Use-the-HTML-Form-Web-Part-to-filter-and-display-data-in-another-Web-Part-860b681c-38ad-43ff-a036-a60868497ff7
cameron rautmann

Present lists in one page

Hi
I have a customer that handles service on machines. They have 3 lists per customer and have over 120 customers.
I would like to present thoose on one page, I tried content search but I didn´t get it to work. It presented everyting in ther lists. (Every object).
Does anyone have any idea on how I can solve this?
//Robert

Hi,
According to your post, my understanding is that you want to present lists in one page.
I recommend that you can use Content Query Web Part.
You need to edit the web part as below:
The result is as below:
Thanks,
Linda Li
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Linda Li
TechNet Community Support

How to get page item list in a page?

how to get page item list in a page?

Have a look at ISpread::GetItemsOnPage().
That should get you started.

Steve, "Simple JSF Popup List of Values Page " does not work..

Hi Steve,
I read "Not Yet Documented ADF Sample Applications" #80 : "Simple JSF Popup List of Values Page " and download SimpleADFBCLOVJSF.zip, but when I try to run the sample, I get this error :
JBO-33001: Cannot find the configuration file /xxx/common/bc4j.xcfg in the classpath
What is wrong ?
Thank you,
xtanto

Thanks for reporting this. I've uploaded a newer version of the zip file that fixes this issue.
It was due to a last-minute refactoring of my model project from having the application module living in a package named "xxx" to another package named "example.model"

Is it possible to combine a address list with a Pages document and a data base in Numbers, the equivalent of "Mail Merge" using Microsoft?

Is it possible to combine an address list with a Pages 5.1 document and a data base in Numbers 3.1, the equivelent of Microsoft "Mail Merge"?

It is possible in Pages 09 and Numbers 09 but not in the versions you name.

External List and Publishing Pages

Noted here:
https://social.technet.microsoft.com/Forums/en-US/3314833a-8fbf-47dc-b05c-aa3f797e899f/action?threadDisplayName=external-list-not-updating-on-published-page
It is a bug.. but this is from over a year ago.
Specifically, Putting an external list on a publishing page renders correctly until you publish. Once you publish all you see is the "loading" green spinning icon.
One proposed workaround was to use a business list webpart, however I cannot override the jslink of a business data webpart. Any insight into a resolution would be appreciated!
Also, clicking the "Enable Asyncronous Load" doesn't resolve the issue. It continues to remain unchecked when checking the box.

Hi,
According to your post, my understanding is that you have an issue about the external list in publishing page.
I can reproduce the issue in the SharePoint server 2013 without installing any CUs or PU.
However, in another SharePoint server 2013 environment which installed the SP1, I add the external list in a publishing page, then publishing the page, the page renders the external list well without any issue.
I recommend you install the SharePoint server 2013 SP1, then check whether it works.
You can download the SP1 in here:
http://www.microsoft.com/en-us/download/details.aspx?id=42544
Thanks,
Jason
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Jason Guo
TechNet Community Support

LEP List of Effective Pages

Similar Messages

Maybe you are looking for