LES service
We have a LES 100 Worldcom service and have been running it as a point-to-point link between 2 x 3600 routers. We needed to add a second routed network and therefore inserted 2xCat3550's on the ends of the LES. Trunking was configured between 3550's. With trunking turned on routing protocol adjacencies could be seen to drop periodically. We belive it's an MTU issues with the Worldcom circuit as it behaves abnormally when we configure ISL or 802.1Q. If the switch ports at either end of the LES are configured as access ports then there is no issue.
Has anybody seen this issue and is it MTU and if so is there a workaround
Hello,
is OSPF the routing protocol in use ? If so, I know of issues with the OSPF MTU size on the 3550, you could try and configure 'ip ospf mtu-ignore' on the respective interfaces of the 3550, and see if that makes a difference...
Regards,
GP
Similar Messages
-
Avec le customization wizard, je tente de créer un MST pour Acrobat Reader 11
Je veux désactiver les services en ligne, mais je veux garder la portion "Je veux signer"
Malheureusement, les options disponibles ne me le permettent pas
Avez vous une idée -
Bonjour
J'ai commande l e CD mo lion untain et en Allant voir ma commande J'ai du un message de la CE,
Terminé: . Seuls Les services d'd'Apple Vous Ont Été Factures Vous ne recevrez article Aucun physique.
Que DOI je faire?salut, as tu trouve la réponse a ta question ou résolu ton problème car j'ai le même mais personne le n'ayant répondu précédemment... Peux tu m'éclairer?
-
Qui contacter quand les services de support Adobe vous raccroche au nez plusieurs fois ??
Est ce un scandale de demander des précisions sur les licences acquises et surtout se faire expliquer la réception d'un mail des services Adobe concernant une référence de commande inconnu de mes services ??Perso, on me répond qu'il n'y a pas de maintenance pour un logiciel Adobe s'il n'a pas acheté en ligne. Acheté sur Amazon, impossible de visualiser les photos, aucune réponse, en résumé : payez et allez vous faire f...
-
Du00E9connexion services BO en clustering actif
Bonjour,
Nous utilisons Business Objects XIR2 SP2 et plus précisément Webi. Nous possédons 115 licences individuelles.
Infoview est installé sur un serveur IIS, nous sommes en clustering actif et nous requêtons sur une base Oracle 10g.
Néanmoins, nous sommes confrontés à du2019incessants problèmes de déconnexion. Pourtant, nous avons minutieusement vérifié tous les paramètres.
Au niveau de la CMS, nous avons passé en revue tous les services pour fixer les temps du2019inactivité à 120 minutes.
Au niveau des univers, nous avons passé ce temps à 100 minutes.
Néanmoins, le système se déconnecte tout de même.
Ce que nous avons remarqué, cu2019est que parfois les services du2019une serveur (puisque nous sommes en cluster, nous avons deux serveurs) apparaissent en rouge (en erreur) sur la console.
Portant, sur IIS, les services apparaissent en vert (donc démarrés)!
Par contre, si nous regardons dans les logs de IIs, nous nous apercevons quu2019il y a eu une coupure de la connexion au cluster :
Event Type: Error
Event Source: BusinessObjects_CMS
Event Category: Clustering
Event ID: 33407
Date: 21/07/2009
Time: 12:39:41
User: N/A
Computer: XXXX
Description:
Cluster connection with XXXX.EMEA.CIB has been broken on notifier side for reason: (Remote listener has expired.). Check network connections to CMS machines, and test responsiveness of system database.
Pouvez-vous nous aider car la situation devient réellement préoccupante.
Je vous remercie.Bonjour,
Nous utilisons Business Objects XIR2 SP2 et plus précisément Webi. Nous possédons 115 licences individuelles.
Infoview est installé sur un serveur IIS, nous sommes en clustering actif et nous requêtons sur une base Oracle 10g.
Néanmoins, nous sommes confrontés à du2019incessants problèmes de déconnexion. Pourtant, nous avons minutieusement vérifié tous les paramètres.
Au niveau de la CMS, nous avons passé en revue tous les services pour fixer les temps du2019inactivité à 120 minutes.
Au niveau des univers, nous avons passé ce temps à 100 minutes.
Néanmoins, le système se déconnecte tout de même.
Ce que nous avons remarqué, cu2019est que parfois les services du2019une serveur (puisque nous sommes en cluster, nous avons deux serveurs) apparaissent en rouge (en erreur) sur la console.
Portant, sur IIS, les services apparaissent en vert (donc démarrés)!
Par contre, si nous regardons dans les logs de IIs, nous nous apercevons quu2019il y a eu une coupure de la connexion au cluster :
Event Type: Error
Event Source: BusinessObjects_CMS
Event Category: Clustering
Event ID: 33407
Date: 21/07/2009
Time: 12:39:41
User: N/A
Computer: XXXX
Description:
Cluster connection with XXXX.EMEA.CIB has been broken on notifier side for reason: (Remote listener has expired.). Check network connections to CMS machines, and test responsiveness of system database.
Pouvez-vous nous aider car la situation devient réellement préoccupante.
Je vous remercie. -
hi everybody,
Is it possible to get the return of a SALT function in order to know if its execution went well?
Also, depending on the good execution of the function, is it possible to call a TUXEDO service just after this recovering?
thanks for your answer ;)hi,
ok I'm going to speak frensh to explain better :
En fait je souhaite utiliser salt pour permettre a un client d'effectuer une demande d'autorisation via SALT et les services tuxedo. Une fois la demande d'autorisation effectué mon service tuxedo va renvoyer la réponse au client en transformant le buffer FML en message XML. Pour renvoyer la réponse au client, SALT va utiliser une certaine fonction et je voulai savoir si il y avait possibilité de récupéré le code retour de cette fonction et ainsi savoir si le message a bien était réceptionné par le client et ainsi relancé dans juste après un second appel de service de tuxedo pour en informer le serveur interne.
Est ce plus clair ? -
Re: Java & Microsoft ??
Conscientiously speaking, how could point #7 on MS IE EULA (attached
below) be valid ? Is what Microsoft's saying here really true? Could somebody pls
clarify at the earliest, if possible.
Thanks & regards,
Is Java Finished?
http://story.news.yahoo.com/news?tmpl=story&u=/nf/20030904/bs_nf/22216
MICROSOFT INTERNET EXPLORER, VERSION 5.2, AND SOFTWARE RELATED
COMPONENTS.
END-USER LICENSE AGREEMENT FOR MICROSOFT SOFTWARE
IMPORTANT-READ CAREFULLY: This Microsoft End-User License Agreement
("EULA") is a legal agreement between you (either an individual or a
single entity) and Microsoft Corporation for the Microsoft software
product(s) identified above which may include associated software
components, media, printed materials, and "online" or electronic
documentation ("SOFTWARE PRODUCT"). By installing, copying, or
otherwise using the SOFTWARE PRODUCT, you agree to be bound by the
terms of this EULA. If you do not agree to the terms of this EULA, do
not install or use the SOFTWARE PRODUCT. If the SOFTWARE PRODUCT was
purchased by you, you may return it to your place of purchase for a
full refund.
The SOFTWARE PRODUCT is protected by copyright laws and international
copyright treaties, as well as other intellectual property laws and
treaties. The SOFTWARE PRODUCT is licensed, not sold.
1. GRANT OF LICENSE. The SOFTWARE PRODUCT is licensed as follows:
* Installation and Use. Microsoft grants you the right to install and
use copies of the SOFTWARE PRODUCT on your computers running validly
licensed copies of the operating system for which the SOFTWARE
PRODUCT was designed [e.g., Windows(r) 95; Windows NT(r), Windows
3.x, Macintosh, etc.].
* Backup Copies. You may also make copies of the SOFTWARE PRODUCT as
may be necessary for backup and archival purposes.
Components. Certain software components of the SOFTWARE PRODUCT are
subject to the following additional provisions:
NetMeeting. NetMeeting contains technology that enables applications
to be shared between two or more computers, even if an application is
installed on only one of the computers. You may use this technology
with all Microsoft application products for multi-party conferences.
For non-Microsoft applications, you should consult the accompanying
license agreement or contact the licensor to determine whether
application sharing is permitted by the licensor.
2.
DESCRIPTION OF OTHER RIGHTS AND LIMITATIONS.
* Maintenance of Copyright Notices. You must not remove or alter any
copyright notices on all copies of the SOFTWARE PRODUCT.
* Distribution. You may not distribute copies of the SOFTWARE PRODUCT
to third parties.
* Prohibition on Reverse Engineering, Decompilation, and Disassembly.
You may not reverse engineer, decompile, or disassemble the SOFTWARE
PRODUCT, except and only to the extent that such activity is
expressly permitted by applicable law notwithstanding this
limitation.
* Rental. You may not rent, lease, or lend the SOFTWARE PRODUCT.
* Transfer. You may permanently transfer all of your rights under
this EULA, provided the recipient agrees to the terms of this EULA.
* Support Services. Microsoft may provide you with support services
related to the SOFTWARE PRODUCT ("Support Services"). Use of Support
Services is governed by the Microsoft polices and programs described
in the user manual, in "on line" documentation and/or other
Microsoft-provided materials. Any supplemental software code provided
to you as part of the Support Services shall be considered part of
the SOFTWARE PRODUCT and subject to the terms and conditions of this
EULA. With respect to technical information you provide to Microsoft
as part of the Support Services, Microsoft may use such information
for its business purposes, including for product support and
development. Microsoft will not utilize such technical information in
a form that personally identifies you.
* Compliance with Applicable Laws. You must comply with all
applicable laws regarding use of the SOFTWARE PRODUCT.
3. TERMINATION. Without prejudice to any other rights, Microsoft may
terminate this EULA if you fail to comply with the terms and
conditions of this EULA. In such event, you must destroy all copies
of the SOFTWARE PRODUCT.
4. COPYRIGHT. All title, including but not limited to copyrights, in
and to the SOFTWARE PRODUCT and any copies thereof are owned by
Microsoft or its suppliers. All title and intellectual property
rights in and to the content which may be accessed through use of the
SOFTWARE PRODUCT is the property of the respective content owner and
may be protected by applicable copyright or other intellectual
property laws and treaties. This EULA grants you no rights to use
such content. All rights not expressly granted are reserved by
Microsoft.
5. U.S. GOVERNMENT RESTRICTED RIGHTS. All SOFTWARE PRODUCT provided
to the U.S. Government pursuant to solicitations issued on or after
December 1, 1995 is provided with the commercial rights and
restrictions described elsewhere herein. All SOFTWARE PRODUCT
provided to the U.S. Government pursuant to solicitations issued
prior to December 1, 1995 is provided with RESTRICTED RIGHTS as
provided for in FAR, 48 CFR 52.227-14 (JUNE 1987) or FAR, 48 CFR
252.227-7013 (OCT 1988), as applicable.
6. EXPORT RESTRICTIONS. You acknowledge that Software Product is of
U.S. origin. You agree to comply with all applicable international
and national laws that apply to the Software Product, including the
U.S. Export Administration Regulations, as well as end-user, end-use
and destination restrictions issued by U.S. and other governments.
For additional information, see .
7. NOTE ON JAVA SUPPORT. The SOFTWARE PRODUCT may contain support for
programs written in Java. Java technology is not fault tolerant and
is not designed, manufactured, or intended for use or resale as
on-line control equipment in hazardous environments requiring
fail-safe performance, such as in the operation of nuclear
facilities, aircraft navigation or communication systems, air traffic
control, direct life support machines, or weapons systems, in which
the failure of Java technology could lead directly to death, personal
injury, or severe physical or environmental damage.
8. NO WARRANTIES. To the maximum extent permitted by applicable law,
Microsoft and its suppliers provide the SOFTWARE PRODUCT and any (if
any) Support Services related to the SOFTWARE PRODUCT AS IS AND WITH
ALL FAULTS, and hereby disclaim all warranties and conditions, either
express, implied or statutory, including, but not limited to, any (if
any) implied warranties or conditions of merchantability, of fitness
for a particular purpose, of lack of viruses, of accuracy or
completeness of responses, of results, and of lack of negligence or
lack of workmanlike effort, all with regard to the SOFTWARE PRODUCT,
and the provision of or failure to provide Support Services. ALSO,
THERE IS NO WARRANTY OR CONDITION OF TITLE, QUIET ENJOYMENT, QUIET
POSSESSION, CORRESPONDENCE TO DESCRIPTION OR NON-INFRINGEMENT, WITH
REGARD TO THE SOFTWARE PRODUCT. THE ENTIRE RISK AS TO THE QUALITY OF
OR ARISING OUT OF USE OR PERFORMANCE OF THE SOFTWARE PRODUCT AND
SUPPORT SERVICES, IF ANY, REMAINS WITH YOU.
9. EXCLUSION OF INCIDENTAL, CONSEQUENTIAL AND CERTAIN OTHER DAMAGES.
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, IN NO EVENT SHALL
MICROSOFT OR ITS SUPPLIERS BE LIABLE FOR ANY SPECIAL, INCIDENTAL,
INDIRECT, OR CONSEQUENTIAL DAMAGES WHATSOEVER (INCLUDING, BUT NOT
LIMITED TO, DAMAGES FOR LOSS OF PROFITS OR CONFIDENTIAL OR OTHER
INFORMATION, FOR BUSINESS INTERRUPTION, FOR PERSONAL INJURY, FOR LOSS
OF PRIVACY, FOR FAILURE TO MEET ANY DUTY INCLUDING OF GOOD FAITH OR
OF REASONABLE CARE, FOR NEGLIGENCE, AND FOR ANY OTHER PECUNIARY OR
OTHER LOSS WHATSOEVER) ARISING OUT OF OR IN ANY WAY RELATED TO THE
USE OF OR INABILITY TO USE THE SOFTWARE PRODUCT, THE PROVISION OF OR
FAILURE TO PROVIDE SUPPORT SERVICES, OR OTHERWISE UNDER OR IN
CONNECTION WITH ANY PROVISION OF THIS EULA, EVEN IN THE EVENT OF THE
FAULT, TORT (INCLUDING NEGLIGENCE), STRICT LIABILITY, BREACH OF
CONTRACT OR BREACH OF WARRANTY OF MICROSOFT OR ANY SUPPLIER, AND EVEN
IF MICROSOFT OR ANY SUPPLIER HAS BEEN ADVISED OF THE POSSIBILITY OF
SUCH DAMAGES.
10. LIMITATION OF LIABILITY. Notwithstanding any damages that you
might incur for any reason whatsoever (including, without limitation,
all damages referenced above and all direct or general damages), the
entire liability of Microsoft and any of its suppliers under any
provision of this EULA and your exclusive remedy for all of the
foregoing shall be limited to the greater of the amount actually paid
by you for the SOFTWARE PRODUCT or U.S.$5.00. The foregoing
limitations, exclusions and disclaimers shall apply to the maximum
extent permitted by applicable law, even if any remedy fails its
essential purpose.
11.
MISCELLANEOUS.
If you acquired this SOFTWARE PRODUCT in the United States, this EULA
is governed by the laws of the State of Washington. If you acquired
this SOFTWARE PRODUCT in Canada, unless expressly prohibited by local
law, this EULA is governed by the laws in force in the Province of
Ontario, Canada; and, in respect of any dispute which may arise
hereunder, you consent to the jurisdiction of the federal and
provincial courts sitting in Toronto, Ontario. If this SOFTWARE
PRODUCT was acquired outside the United States, then local law may
apply.
Should you have any questions concerning this EULA, or if you desire
to contact Microsoft for any reason, please contact the Microsoft
subsidiary serving your country, or write: Microsoft Sales
Information Center/One Microsoft Way/Redmond, WA 98052-6399.
Si vous avez acquis votre produit Microsoft au CANADA, la garantie
limit�e suivante vous concerne :
RENONCIATION AUX GARANTIES. Dans toute la mesure permise par la
l�gislation en vigueur, Microsoft et ses fournisseurs fournissent le
Produit Logiciel et tous (selon le cas) les services d'assistance
li�s au Produit Logiciel ("Services d'assistance") TELS QUELS ET AVEC
TOUS LEURS D�FAUTS, et par les pr�sentes excluent toute garantie ou
condition, expresse ou implicite, l�gale ou conventionnelle, �crite
ou verbale, y compris, mais sans limitation, toute (selon le cas)
garantie ou condition implicite ou l�gale de qualit� marchande, de
conformit� � un usage particulier, d'absence de virus, d'exactitude
et d'int�gralit� des r�ponses, de r�sultats, d'efforts techniques et
professionnels et d'absence de n�gligence, le tout relativement au
Produit Logiciel et � la prestation ou � la non-prestation des
Services d'assistance. DE PLUS, IL N'Y A AUCUNE GARANTIE ET CONDITION
DE TITRE, DE JOUISSANCE PAISIBLE, DE POSSESSION PAISIBLE, DE
SIMILARIT� � LA DESCRIPTION ET D'ABSENCE DE CONTREFA�ON RELATIVEMENT
AU PRODUIT LOGICIEL. Vous supportez tous les risques d�coulant de
l'utilisation et de la performance du Produit Logiciel et ceux
d�coulant des Services d'assistance (s'il y a lieu).
EXCLUSION DES DOMMAGES INDIRECTS, ACCESSOIRES ET AUTRES. Dans toute
la mesure permise par la l�gislation en vigueur, Microsoft et ses
fournisseurs ne sont en aucun cas responsables de tout dommage
sp�cial, indirect, accessoire, moral ou exemplaire quel qu'il soit (y
compris, mais sans limitation, les dommages entra�n�s par la perte de
b�n�fices ou la perte d'information confidentielle ou autre,
l'interruption des affaires, les pr�judices corporels, la perte de
confidentialit�, le d�faut de remplir toute obligation y compris les
obligations de bonne foi et de diligence raisonnable, la n�gligence
et toute autre perte p�cuniaire ou autre perte de quelque nature que
ce soit) d�coulant de, ou de toute autre mani�re li� �, l'utilisation
ou l'impossibilit� d'utiliser le Produit Logiciel, la prestation ou
la non-prestation des Services d'assistance ou autrement en vertu de
ou relativement � toute disposition de cette convention, que ce soit
en cas de faute, de d�lit (y compris la n�gligence), de
responsabilit� stricte, de manquement � un contrat ou de manquement �
une garantie de Microsoft ou de l'un de ses fournisseurs, et ce, m�me
si Microsoft ou l'un de ses fournisseurs a �t� avis� de la
possibilit� de tels dommages.
LIMITATION DE RESPONSABILIT� ET RECOURS. Malgr� tout dommage que vous
pourriez encourir pour quelque raison que ce soit (y compris, mais
sans limitation, tous les dommages mentionn�s ci-dessus et tous les
dommages directs et g�n�raux), la seule responsabilit� de Microsoft
et de ses fournisseurs en vertu de toute disposition de cette
convention et votre unique recours en regard de tout ce qui pr�c�de
sont limit�s au plus �lev� des montants suivants: soit (a) le montant
que vous avez pay� pour le Produit Logiciel, soit (b) un montant
�quivalant � cinq dollars U.S. (5,00 $ U.S.). Les limitations,
exclusions et renonciations ci-dessus s'appliquent dans toute la
mesure permise par la l�gislation en vigueur, et ce m�me si leur
application a pour effet de priver un recours de son essence.
DROITS LIMIT�S DU GOUVERNEMENT AM�RICAIN
Tout Produit Logiciel fourni au gouvernement am�ricain conform�ment �
des demandes �mises le ou apr�s le 1er d�cembre 1995 est offert avec
les restrictions et droits commerciaux d�crits ailleurs dans la
pr�sente convention. Tout Produit Logiciel fourni au gouvernement
am�ricain conform�ment � des demandes �mises avant le 1er d�cembre
1995 est offert avec des DROITS LIMIT�S tels que pr�vus dans le FAR,
48CFR 52.227-14 (juin 1987) ou dans le FAR, 48CFR 252.227-7013
(octobre 1988), tels qu'applicables. Sauf lorsqu'express�ment prohib�
par la l�gislation locale, la pr�sente convention est r�gie par les
lois en vigueur dans la province d'Ontario, Canada. Pour tout
diff�rend qui pourrait d�couler des pr�sentes, vous acceptez la
comp�tence des tribunaux f�d�raux et provinciaux si�geant � Toronto,
Ontario.
Si vous avez des questions concernant cette convention ou si vous
d�sirez communiquer avec Microsoft pour quelque raison que ce soit,
veuillez contacter la succursale Microsoft desservant votre pays, ou
�crire �: Microsoft Sales Information Center, One Microsoft Way,
Redmond, Washington 98052-6399.It's true.
These two systems together (or independently?) should not be used for mission critical systems, ie the specialized systems that these run on must be like 100% or six sigma or whatever.
There was another thread floating around about this. -
Installation adobe photoshop elements & première elements
Bonjour
Je regrette de n'avoir pas acheté Adobe photoshop elements & première élément 12 sur DVD car j'ai des problèmes d'installation.
Photoshop elements ne s'installe pas complètement de ce fait :
– je ne peux lancer l'organiseur ou l'éditeur à partir d'un menu d'accueil
– si j'appelle l'organiseur et que j'appelle l'organiser je vois à l'écran "chargement de l'espace de travail d'Eléments organiser" sans que cet espace apparaisse.
– Si je lance Eléments organiser j'ai un message d'erreur précisant que les "composants requis ne sont pas complètement installé.
– A chaque démarrage j'ai toujours un message d'erreur me précisant "l'impossibilté d'initialiser les services en ligne. Vous devez les réinstaller. Appuyer sur OK pour continuer sans les services en ligne." Que faut-il faire ?
– Je n'arrive pas à désintaller adobe photoshop élément 12 car il n'apparait pas dans la fenêtre de windows 7 configuration de désinstallation d'un programme. Donc je n'ai pas accès à cette fonction de windows.
– Un nouvelle installation avec les même programmes téléchargés aboutit à situation d'échec donc je reste bloqué avec cette installation partielle. Je n'arrive qu'à lancer séparément l'éditeur et l'organiseur à partir de raccourcis que je suis allé cherché dans program files (x86) \ adobe ce qui me donne qu'un vague aperçu des possibilités de ce logiciel avec un fonctionnement incomplet.
Je suis déçu d'arriver à cette situation d'échec car au club photo nous travaillons avec cette version d'adobe photoshopElements. J'avais donc désinstallé la version 10 de que je vous avais acheté avec DVD car je perdais trop de temps à rechercher les correspondances des différentes fonctions lorsque nous travaillons ensemble.
Par ailleurs j’utilise adobe première éléments pour faire les montages des clip vidéo fait avec mon appareil réflexe et je développe pricipalement mes photos RAW avec adobe photoshop lightroom que je vous ai également acheté quand je suis sur mon ordinateur fixe... je suis donc un fidèle client adobe.
En résumé comment puis-je refaire une installation correcte sous Windows 7 64 bits d'Adobe photohop elements 12 que je viens d'acheter et télécharger.
Bien cordialement
Bernard COGNEWithout some system information nobody can really tell you anything. This could be as simple as some security tool on your end interfering with the install, could be something else. We simply don't know.
Mylenium -
Installation iTunes impossible
Lors de la dernière mise à jour de iTunes, le programme est devenu inaccessible. J'ai essayé de le réinstaller plusieurs fois, y compris en supprimant complètement iTunes de l'ordinateur, mais à chaque fois le message suivant apparait : "Echec démarrage du service Apple Mobile Device. Vérifiez que vous disposez des privilèges suffisants pour démarrer les services système".
Si j'essaie de démarrer tout de même iTunes, le message suivant apparaît : MSVCR80.DLL introuvable, puis "Réinstaller iTunes Error 7 (Windows error 126).
Que faire?Try the following user tip:
Troubleshooting issues with iTunes for Windows updates -
I receive an error when install Adobe CC
i want to install adobe CC package that i made with tool that i downloaded from Adobe LWS. ik created the package succesfully. wen i want to install it on mac machine, i get error in adobe installer log:
11/15/14 10:39:07:807 | [ERROR] | | OOBE | DE | | | | 4167 | Install source path either not specified or invalid
11/15/14 10:39:07:807 | [ERROR] | | OOBE | DE | | | | 4167 | Deployment file loading failed
please can someone help me with this issue?02/25/15 14:46:07:566 | [ERROR] | | OOBE | DE | | | | 44614 | Install source path either not specified or invalid
02/25/15 14:46:07:566 | [ERROR] | | OOBE | DE | | | | 44614 | Deployment file loading failed
02/25/15 14:46:07:635 | [INFO] | | OOBE | DE | | | | 44617 | DEVersion: 5.0.0.0
02/25/15 14:46:07:636 | [INFO] | | OOBE | DE | | | | 44617 | Loading library from /Applications/Utilities/Adobe Application Manager/DECore/
The same , merci les services techniques adobe -
Bonsoir ,
informations :
produits : Adobe CS6.
poste en w7 x64, 16 Go Ram, Carte graphique Nvidia Quadro FX1800 (2Go).
Pilotes et version à jour .
l utilisateur n a pas de droits admin.
nous avons rencontré une grande lenteur à l enregistrement puis le message suivant :
microsoft visual c++ runtime Library
runtime Error!
program: C:\Program Files (x86)\adobe\adobeIllustrator
this application has request the runtime to terminate it in an unusual way
le journal des évènement remonte ceci :
Nom de l’application défaillante Illustrator.exe, version : 15.0.2.399, horodatage : 0x4ce0f2fc
Nom du module défaillant : AppBarControlsPlugin.aip, version : 15.0.128.0, horodatage : 0x4bad10d0
Code d’exception : 0xc000041d
Décalage d’erreur : 0x000068c7
ID du processus défaillant : 0x91c
Heure de début de l’application défaillante : 0x01cf69ef5aa3f177
Chemin d’accès de l’application défaillante : C:\Program Files (x86)\Adobe\Adobe Illustrator CS5\Support Files\Contents\Windows\Illustrator.exe
Chemin d’accès du module défaillant: C:\Program Files (x86)\Adobe\Adobe Illustrator CS5\Plug-ins\Extensions\AppBarControlsPlugin.aip
ID de rapport : f7f365cd-d5e2-11e3-be91-70f395007d17
quelqu un a une idée?
cdtSalut Havaana,
Arret et redemarrage des services d'impression dans windows, puis redemarrage du Pc.
2 options :
ouvrir la fenêtre dos, et saisir : net stop spooler, attendre 2 secondes puis saisir net start spooler
ou dans demarrer, executer, services.msc puis dans les services trouver les services d'impressions, clic droit et redemarrer.
Voila, c'est aussi simple que ça.
Numériquement. -
Plantage Illustrator CS5 V15.0.2 lors de la sauvegarde
Bonjour a toutes, bonjour a tous
Je viens vers vous car je rencontre un soucis avec illustrator CS5 depuis peu. Je m'explique :
Lorsque je crée un projet, et que je travail ce projet a 100% (sans import d'éléments externes par exemple), je peux sauvegarder mon travail.
En revanche si je crée un document et que j'importe un fichier existant dedans, au moment de la sauvegarde, illustrator cesse de fonctionner, et Windows 7, mets un "placard" disant qu'illustrator a cessé de fonctionner, et qu'il va tenter de m'apporter une solution pour résoudre mon problème.
Même soucis lorsque j'ouvre un document existant pour modification, si je masque par exemple un calque, je vois apparaitre en haut de la barre de menu, (ne répond pas), puis j'ai le message d'erreur de Win 7.
J'ai testé mes fichier sur le poste d'un collégue (avec Win Xp), et la ça fonctionne parfaitement.
Avez vous une idée sur l'origine de mon problème, ou une piste me permettant de résoudre de soucis.
D'avance merci de vos réponses
Nom du journal :Application
Source : Application Error
Date : 26/03/2011 17:32:01
ID de l’événement :1000
Catégorie de la tâche :(100)
Niveau : Erreur
Mots clés : Classique
Utilisateur : N/A
Ordinateur : Véro-PC
Description :
Nom de l’application défaillante Illustrator.exe, version : 15.0.2.399,
horodatage : 0x4ce0f2fc
Nom du module défaillant : AGM.dll, version : 4.20.69.9418, horodatage :
0x4c296457
Code d’exception : 0xc0000005
Décalage d’erreur : 0x00240f9d
ID du processus défaillant : 0x17ac
Heure de début de l’application défaillante : 0x01cbebd328446c21
Chemin d’accès de l’application défaillante : C:\Program
Files\Adobe\Adobe Illustrator CS5\Support
Files\Contents\Windows\Illustrator.exe
Chemin d’accès du module défaillant: C:\Program Files\Adobe\Adobe
Illustrator CS5\Support Files\Contents\Windows\AGM.dll
ID de rapport : 93567c8e-57c6-11e0-8480-00248c1f02ab
XML de l’événement :
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Application Error" />
<EventID Qualifiers="0">1000</EventID>
<Level>2</Level>
<Task>100</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2011-03-26T16:32:01.000000000Z" />
<EventRecordID>7309</EventRecordID>
<Channel>Application</Channel>
<Computer>Véro-PC</Computer>
<Security />
</System>
<EventData>
<Data>Illustrator.exe</Data>
<Data>15.0.2.399</Data>
<Data>4ce0f2fc</Data>
<Data>AGM.dll</Data>
<Data>4.20.69.9418</Data>
<Data>4c296457</Data>
<Data>c0000005</Data>
<Data>00240f9d</Data>
<Data>17ac</Data>
<Data>01cbebd328446c21</Data>
<Data>C:\Program Files\Adobe\Adobe Illustrator CS5\Support
Files\Contents\Windows\Illustrator.exe</Data>
<Data>C:\Program Files\Adobe\Adobe Illustrator CS5\Support
Files\Contents\Windows\AGM.dll</Data>
<Data>93567c8e-57c6-11e0-8480-00248c1f02ab</Data>
</EventData>
</Event>Salut Havaana,
Arret et redemarrage des services d'impression dans windows, puis redemarrage du Pc.
2 options :
ouvrir la fenêtre dos, et saisir : net stop spooler, attendre 2 secondes puis saisir net start spooler
ou dans demarrer, executer, services.msc puis dans les services trouver les services d'impressions, clic droit et redemarrer.
Voila, c'est aussi simple que ça.
Numériquement. -
Bonjour,
j'ai un problème sur mon serveur Solman, quand j'essaye de redémarrer les services de SAP et Oracle, le service Disp-work.exe attend le démarrage de JEE puis après un certain temps le service ne démarre plus.
voici l'erreur que SAPLOGON m'affiche lors du démarrage Solman S11:
error text: WSAECONNREFUSED;trc file: "dev_ms", trc level: 1, release: "700"
[Thr 3464] Fri Apr 18 08:55:04 2008
[Thr 3464] MsSSetTrcLog: trc logging active, max size = 20971520 bytes
systemid 560 (PC with Windows NT)
relno 7000
patchlevel 0
patchno 73
intno 20050900
make: multithreaded, Unicode, optimized
pid 2556
[Thr 3464] ***LOG Q01=> MsSInit, MSStart (Msg Server 1 2556) [msxxserv.c 1824]
[Thr 3464] load acl file = F:\usr\sap\S11\SYS\global\ms_acl_info.DAT
[Thr 3464] MsGetOwnIpAddr: my host addresses are :
[Thr 3464] 1 : [10.100.2.69] sapsolman.onepnet.intra (HOSTNAME)
[Thr 3464] 2 : [127.0.0.1] sapsolman.onepnet.intra (LOCALHOST)
[Thr 3464] MsHttpInit: full qualified hostname = sapsolman.onepnet.intra
[Thr 3464] HTTP logging is switch off
[Thr 3464] set HTTP state to LISTEN
[Thr 3464] MsHttpOwnDomain: own domain[1] = onepnet.intra
[Thr 3464] ms/icf_info_server : deleted
[Thr 3464] *** I listen to port sapmsS11 (3600) ***
[Thr 3464] *** I listen to internal port 3900 (3900) ***
[Thr 3464] *** HTTP port 8100 state LISTEN ***
[Thr 3464] CUSTOMER KEY: >C0655850743<
[Thr 3464] Fri Apr 18 08:56:55 2008
[Thr 3464] *** ERROR => MsSClientHandle: no server provides service ENQ (4), requested from sapsolman_S11_00 [msxxserv.c 4679]
trc file: "dev_disp", trc level: 1, release: "700"
sysno 00
sid S11
systemid 560 (PC with Windows NT)
relno 7000
patchlevel 0
patchno 75
intno 20050900
make: multithreaded, Unicode, optimized
pid 648
Fri Apr 18 08:55:12 2008
kernel runs with dp version 217000(ext=109000) (@(#) DPLIB-INT-VERSION-217000-UC)
length of sys_adm_ext is 572 bytes
SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (00 648) [dpxxdisp.c 1237]
shared lib "dw_xml.dll" version 75 successfully loaded
shared lib "dw_xtc.dll" version 75 successfully loaded
shared lib "dw_stl.dll" version 75 successfully loaded
shared lib "dw_gui.dll" version 75 successfully loaded
shared lib "dw_mdm.dll" version 75 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 3900
Fri Apr 18 08:55:18 2008
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 5 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 5273]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: start server >sapsolman_S11_00 <
DpShMCreate: sizeof(wp_adm) 18304 (1408)
DpShMCreate: sizeof(tm_adm) 3994272 (19872)
DpShMCreate: sizeof(wp_ca_adm) 24000 (80)
DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528056/528064
DpShMCreate: sizeof(comm_adm) 528064 (1048)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm) 0 (72)
DpShMCreate: sizeof(vmc_adm) 0 (1440)
DpShMCreate: sizeof(wall_adm) (38456/34360/64/184)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: SHM_DP_ADM_KEY (addr: 05F30040, size: 4653368)
DpShMCreate: allocated sys_adm at 05F30040
DpShMCreate: allocated wp_adm at 05F31E40
DpShMCreate: allocated tm_adm_list at 05F365C0
DpShMCreate: allocated tm_adm at 05F365F0
DpShMCreate: allocated wp_ca_adm at 06305890
DpShMCreate: allocated appc_ca_adm at 0630B650
DpShMCreate: allocated comm_adm at 0630D590
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 0638E450
DpShMCreate: allocated gw_adm at 0638E490
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 0638E4C0
DpShMCreate: allocated wall_adm at 0638E4C8
MBUF state OFF
DpCommInitTable: init table for 500 entries
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation flat
<EsNT> Memory Reset disabled as NT default
<ES> 511 blocks reserved for free list.
ES initialized.
J2EE server info
start = TRUE
state = STARTED
pid = 2944
argv[0] = F:\usr\sap\S11\DVEBMGS00\exe\jcontrol.EXE
argv[1] = F:\usr\sap\S11\DVEBMGS00\exe\jcontrol.EXE
argv[2] = pf=F:\usr\sap\S11\SYS\profile\S11_DVEBMGS00_sapsolman
argv[3] = -DSAPSTART=1
argv[4] = -DCONNECT_PORT=1451
argv[5] = -DSAPSYSTEM=00
argv[6] = -DSAPSYSTEMNAME=S11
argv[7] = -DSAPMYNAME=sapsolman_S11_00
argv[8] = -DSAPPROFILE=F:\usr\sap\S11\SYS\profile\S11_DVEBMGS00_sapsolman
argv[9] = -DFRFC_FALLBACK=ON
argv[10] = -DFRFC_FALLBACK_HOST=localhost
start_lazy = 0
start_control = SAP J2EE startup framework
DpJ2eeStart: j2ee state = STARTED
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG CPS=> DpLoopInit, ICU ( 3.0 3.0 4.0.1) [dpxxdisp.c 1623]
***LOG Q0K=> DpMsAttach, mscon ( sapsolman) [dpxxdisp.c 11586]
Fri Apr 18 08:55:19 2008
DpStartStopMsg: send start message (myname is >sapsolman_S11_00 <)
DpStartStopMsg: start msg sent
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
CCMS: Initalizing shared memory of size 60000000 for monitoring segment.
Fri Apr 18 08:55:21 2008
CCMS: start to initalize 3.X shared alert area (first segment).
DpJ2eeLogin: j2ee state = CONNECTED
DpMsgAdmin: Set release to 7000, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1050]
DpMsgAdmin: Set patchno for this platform to 75
Release check o.K.
Fri Apr 18 08:55:59 2008
ERROR => W0 (pid 4152) died [dpxxdisp.c 14241]
ERROR => W1 (pid 4696) died [dpxxdisp.c 14241]
ERROR => W2 (pid 5460) died [dpxxdisp.c 14241]
ERROR => W3 (pid 1340) died [dpxxdisp.c 14241]
ERROR => W4 (pid 2548) died [dpxxdisp.c 14241]
ERROR => W5 (pid 4920) died [dpxxdisp.c 14241]
my types changed after wp death/restart 0xbf --> 0xbe
ERROR => W6 (pid 3684) died [dpxxdisp.c 14241]
my types changed after wp death/restart 0xbe --> 0xbc
ERROR => W7 (pid 5676) died [dpxxdisp.c 14241]
my types changed after wp death/restart 0xbc --> 0xb8
ERROR => W8 (pid 3112) died [dpxxdisp.c 14241]
ERROR => W9 (pid 1144) died [dpxxdisp.c 14241]
ERROR => W10 (pid 4468) died [dpxxdisp.c 14241]
my types changed after wp death/restart 0xb8 --> 0xb0
ERROR => W11 (pid 2000) died [dpxxdisp.c 14241]
my types changed after wp death/restart 0xb0 --> 0xa0
ERROR => W12 (pid 3892) died [dpxxdisp.c 14241]
my types changed after wp death/restart 0xa0 --> 0x80
DP_FATAL_ERROR => DpWPCheck: no more work processes
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
NiWait: sleep (10000ms) ...
NiISelect: timeout 10000ms
NiISelect: maximum fd=1629
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Apr 18 08:56:09 2008
NiISelect: TIMEOUT occured (10000ms)
dump system status
Workprocess Table (long) Fri Apr 18 08:56:09 2008
========================
No Ty. Pid Status Cause Start Err Sem CPU Time Program Cl User Action Table
0 DIA 4152 Ended no 1 0 0
1 DIA 4696 Ended no 1 0 0
2 DIA 5460 Ended no 1 0 0
3 DIA 1340 Ended no 1 0 0
4 DIA 2548 Ended no 1 0 0
5 DIA 4920 Ended no 1 0 0
6 UPD 3684 Ended no 1 0 0
7 ENQ 5676 Ended no 1 0 0
8 BTC 3112 Ended no 1 0 0
9 BTC 1144 Ended no 1 0 0
10 BTC 4468 Ended no 1 0 0
11 SPO 2000 Ended no 1 0 0
12 UP2 3892 Ended no 1 0 0
Dispatcher Queue Statistics Fri Apr 18 08:56:09 2008
===========================
--------++++--
+
Typ
now
high
max
writes
reads
--------++++--
+
NOWP
0
2
2000
6
6
--------++++--
+
DIA
5
5
2000
5
0
--------++++--
+
UPD
0
0
2000
0
0
--------++++--
+
ENQ
0
0
2000
0
0
--------++++--
+
BTC
0
0
2000
0
0
--------++++--
+
SPO
0
0
2000
0
0
--------++++--
+
UP2
0
0
2000
0
0
--------++++--
+
max_rq_id 12
wake_evt_udp_now 0
wake events total 8, udp 7 ( 87%), shm 1 ( 12%)
since last update total 8, udp 7 ( 87%), shm 1 ( 12%)
Dump of tm_adm structure: Fri Apr 18 08:56:09 2008
=========================
Term uid man user term lastop mod wp ta a/i (modes)
Workprocess Comm. Area Blocks Fri Apr 18 08:56:09 2008
=============================
Slots: 300, Used: 1, Max: 0
--------++--
+
id
owner
pid
eyecatcher
--------++--
+
0
DISPATCHER
-1
WPCAAD000
NiWait: sleep (5000ms) ...
NiISelect: timeout 5000ms
NiISelect: maximum fd=1629
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Apr 18 08:56:14 2008
NiISelect: TIMEOUT occured (5000ms)
DpHalt: shutdown server >sapsolman_S11_00 < (normal)
DpJ2eeDisableRestart
MsIDelService: delete service J2EE for myself
NiBufSend starting
NiIWrite: hdl 3 sent data (wrt=161,pac=1,MESG_IO)
MsINiWrite: sent 161 bytes
send msg (len 110+51) to name MSG_SERVER, type 0, key -
MsSndName: MS_DEL_PROPERTY ok
Send 51 bytes to MSG_SERVER
MS_DEL_PROPERTY : asynchronous call
send MsDelService(J2EE) to msgserver
DpIJ2eeShutdown: send SIGINT to SAP J2EE startup framework (pid=2944)
killing process (2944) (SOFT_KILL)
DpIJ2eeShutdown: j2ee state = SHUTDOWN
NiBufISelUpdate: new MODE -- (r-) for hdl 4 in set0
SiSelNSet: set events of sock 1504 to: ---
NiBufISelRemove: remove hdl 4 from set0
SiSelNRemove: removed sock 1504 (pos=2)
SiSelNRemove: removed sock 1504
NiSelIRemove: removed hdl 4
DpDelSocketInfo: del info for socket 4 (type=8)
NiICloseHandle: shutdown and close hdl 4 / sock 1504
NiBufIClose: clear extension for hdl 4
DpModState: buffer in state MBUF_PREPARED
NiBufSend starting
NiIWrite: hdl 3 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIModState: change state to SHUTDOWN
DpModState: change server state from STARTING to SHUTDOWN
Switch off Shared memory profiling
ShmProtect( 57, 3 )
ShmProtect(SHM_PROFILE, SHM_PROT_RW
ShmProtect( 57, 1 )
ShmProtect(SHM_PROFILE, SHM_PROT_RD
DpWakeUpWps: wake up all wp's
Stop work processes
Stop gateway
killing process (3968) (SOFT_KILL)
Stop icman
killing process (3120) (SOFT_KILL)
Terminate gui connections
wait for end of work processes
wait for end of gateway
[DpProcDied] Process lives (PID:3968 HANDLE:1600)
waiting for termination of gateway ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1629
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Apr 18 08:56:15 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process died (PID:3968 HANDLE:1600)
wait for end of icman
[DpProcDied] Process lives (PID:3120 HANDLE:1604)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1629
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Apr 18 08:56:16 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:3120 HANDLE:1604)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1629
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Apr 18 08:56:17 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:3120 HANDLE:1604)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1629
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Apr 18 08:56:18 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:3120 HANDLE:1604)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1629
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Apr 18 08:56:19 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:3120 HANDLE:1604)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1629
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Apr 18 08:56:20 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:3120 HANDLE:1604)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1629
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Apr 18 08:56:21 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:3120 HANDLE:1604)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1629
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Apr 18 08:56:22 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:3120 HANDLE:1604)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1629
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Apr 18 08:56:23 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:3120 HANDLE:1604)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1629
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Apr 18 08:56:24 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:3120 HANDLE:1604)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1629
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Apr 18 08:56:25 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:3120 HANDLE:1604)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1629
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Apr 18 08:56:26 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process died (PID:3120 HANDLE:1604)
[DpProcDied] Process lives (PID:2944 HANDLE:1584)
DpHalt: disconnect j2ee listener
DpHalt: wait for end of j2ee server
[DpProcDied] Process lives (PID:2944 HANDLE:1584)
waiting for termination of J2EE server ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1629
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Apr 18 08:56:27 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2944 HANDLE:1584)
waiting for termination of J2EE server ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1629
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Apr 18 08:56:28 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2944 HANDLE:1584)
waiting for termination of J2EE server ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1629
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Apr 18 08:56:29 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2944 HANDLE:1584)
waiting for termination of J2EE server ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1629
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Apr 18 08:56:30 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2944 HANDLE:1584)
waiting for termination of J2EE server ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1629
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Apr 18 08:56:31 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2944 HANDLE:1584)
waiting for termination of J2EE server ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1629
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Apr 18 08:56:32 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2944 HANDLE:1584)
waiting for termination of J2EE server ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1629
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Apr 18 08:56:33 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2944 HANDLE:1584)
waiting for termination of J2EE server ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1629
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Apr 18 08:56:34 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2944 HANDLE:1584)
waiting for termination of J2EE server ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1629
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Apr 18 08:56:35 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2944 HANDLE:1584)
waiting for termination of J2EE server ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1629
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Apr 18 08:56:36 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2944 HANDLE:1584)
waiting for termination of J2EE server ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1629
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Apr 18 08:56:37 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2944 HANDLE:1584)
waiting for termination of J2EE server ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1629
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Apr 18 08:56:38 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2944 HANDLE:1584)
waiting for termination of J2EE server ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1629
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Apr 18 08:56:39 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2944 HANDLE:1584)
waiting for termination of J2EE server ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1629
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Apr 18 08:56:40 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2944 HANDLE:1584)
waiting for termination of J2EE server ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1629
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Apr 18 08:56:41 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2944 HANDLE:1584)
waiting for termination of J2EE server ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1629
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Apr 18 08:56:42 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2944 HANDLE:1584)
waiting for termination of J2EE server ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1629
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Apr 18 08:56:43 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2944 HANDLE:1584)
waiting for termination of J2EE server ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1629
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Apr 18 08:56:44 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2944 HANDLE:1584)
waiting for termination of J2EE server ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1629
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Apr 18 08:56:45 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2944 HANDLE:1584)
waiting for termination of J2EE server ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1629
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Apr 18 08:56:46 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2944 HANDLE:1584)
waiting for termination of J2EE server ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1629
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Apr 18 08:56:47 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2944 HANDLE:1584)
waiting for termination of J2EE server ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1629
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Apr 18 08:56:48 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2944 HANDLE:1584)
waiting for termination of J2EE server ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1629
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Apr 18 08:56:49 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2944 HANDLE:1584)
waiting for termination of J2EE server ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1629
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Apr 18 08:56:50 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2944 HANDLE:1584)
waiting for termination of J2EE server ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1629
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Apr 18 08:56:51 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2944 HANDLE:1584)
waiting for termination of J2EE server ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1629
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Apr 18 08:56:52 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2944 HANDLE:1584)
waiting for termination of J2EE server ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1629
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Apr 18 08:56:53 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2944 HANDLE:1584)
waiting for termination of J2EE server ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1629
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Apr 18 08:56:54 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2944 HANDLE:1584)
waiting for termination of J2EE server ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1629
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Apr 18 08:56:55 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process died (PID:2944 HANDLE:1584)
DpStartStopMsg: send stop message (myname is >sapsolman_S11_00 <)
NiIMyHostName: hostname = 'sapsolman'
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 4 (AD_STARTSTOP), ser 0, ex 0, errno 0
DpConvertRequest: net size = 189 bytes
NiBufSend starting
NiIWrite: hdl 3 sent data (wrt=562,pac=1,MESG_IO)
MsINiWrite: sent 562 bytes
send msg (len 110+452) to name -, type 4, key -
DpStartStopMsg: stop msg sent
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 received data (rcd=114,pac=1,MESG_IO)
NiBufIIn: NIBUF len=114
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 114 bytes
MSG received, len 110+4, flag 3, from MSG_SERVER , typ 0, key -
DpHalt: received 4 bytes from message server
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 recv would block (errno=EAGAIN)
NiIRead: read for hdl 3 timed out (0ms)
DpHalt: no more messages from the message server
DpHalt: send keepalive to synchronize with the message server
NiBufSend starting
NiIWrite: hdl 3 sent data (wrt=114,pac=1,MESG_IO)
MsINiWrite: sent 114 bytes
send msg (len 110+4) to name MSG_SERVER, type 0, key -
MsSndName: MS_NOOP ok
Send 4 bytes to MSG_SERVER
NiIRead: hdl 3 recv would block (errno=EAGAIN)
NiIPeek: peek successful for hdl 3 (r)
NiIRead: hdl 3 received data (rcd=114,pac=1,MESG_IO)
NiBufIIn: NIBUF len=114
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 114 bytes
MSG received, len 110+4, flag 3, from MSG_SERVER , typ 0, key -
Received 4 bytes from MSG_SERVER
Received opcode MS_NOOP from msg_server, reply MSOP_OK
MsOpReceive: ok
MsSendKeepalive : keepalive sent to message server
NiIRead: hdl 3 recv would block (errno=EAGAIN)
Fri Apr 18 08:56:56 2008
NiIPeek: peek for hdl 3 timed out (r; 1000ms)
NiIRead: read for hdl 3 timed out (1000ms)
DpHalt: no more messages from the message server
DpHalt: sync with message server o.k.
detach from message server
***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c 11899]
NiBufSend starting
NiIWrite: hdl 3 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIDetach: send logout to msg_server
MsIDetach: call exit function
DpMsShutdownHook called
NiBufISelUpdate: new MODE -- (r-) for hdl 3 in set0
SiSelNSet: set events of sock 1528 to: ---
NiBufISelRemove: remove hdl 3 from set0
SiSelNRemove: removed sock 1528 (pos=3)
SiSelNRemove: removed sock 1528
NiSelIRemove: removed hdl 3
MBUF state OFF
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
blks_in_queue/wp_ca_blk_no/wp_max_no = 1/300/13
LOCK WP ca_blk 1
make DISP owner of wp_ca_blk 1
DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 15)
MBUF component DOWN
NiICloseHandle: shutdown and close hdl 3 / sock 1528
NiBufIClose: clear extension for hdl 3
MsIDetach: detach MS-system
cleanup EM
EsCleanup ....
EmCleanup() -> 0
Es2Cleanup: Cleanup ES2
***LOG Q05=> DpHalt, DPStop ( 648) [dpxxdisp.c 10259]
Good Bye ..... -
Qosmio F50-111: Control buttons stopped working using VMWARE Workstation
Hi,
Since Ive installed VMWARE Workstation v6.0.3, my touch buttons (play, pause, stop, media center, next, previous, mute, and light, webcam, and dolby) stopped working.
So Ive chosen to restore my Vista before the installation on my VMWARE. It works my buttons work again...
BUT I need to install this software (vmware) for my job use.
I've already tried to remove and install then new Value Added Package from Toshiba Website, but it doesn't work.
Please help me
It mean that the applications (in the TBS folder, like TDspBtn.exe, TBSbtnSt.exe,...) start running but stop immediately.
Thank's for your comming helpI tried to disable VMware services but it didn't solve the problem but I found something interesting.
I opened the windows Event Viewer and in Windows logs > System I saw that for each boot of the PC there is a log about TBS, Toshiba Button Support which says:
"Aucun périphérique de sécurité du module de plateforme sécurisée compatible trouvé sur cet ordinateur. Impossible de démarrer les services de base de module de plateforme sécurisée."
I don't know the english message but it's something like no compatible device of security of safety platform found on this computer. Unable to start The base services of the module of safety platform.
I hope this with help us and Toshiba to find where does this incompatibility comes from.
* System
- Provider
[ Name|http://forums.computers.toshiba-europe.com/forums/] Microsoft-Windows-TBS
[ Guid|http://forums.computers.toshiba-europe.com/forums/] {51480c1a-90aa-416e-98fd-4c11f735349b}
EventID 537
Version 0
Level 4
Task 0
Opcode 0
Keywords 0x8000000000000000
- TimeCreated
[ SystemTime|http://forums.computers.toshiba-europe.com/forums/] 2009-01-04T03:54:49.807Z
EventRecordID 32303
Correlation
- Execution
[ ProcessID|http://forums.computers.toshiba-europe.com/forums/] 1100
[ ThreadID|http://forums.computers.toshiba-europe.com/forums/] 4324
Channel System
Computer JCLB-X300-126
- Security
[ UserID|http://forums.computers.toshiba-europe.com/forums/] S-1-5-19
EventData
now in XML
* <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
* <System>
<Provider Name="Microsoft-Windows-TBS" Guid="{51480c1a-90aa-416e-98fd-4c11f735349b}" />
<EventID>537</EventID>
<Version>0</Version>
<Level>4</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords>0x8000000000000000</Keywords>
<TimeCreated SystemTime="2009-01-04T03:54:49.807Z" />
<EventRecordID>32303</EventRecordID>
<Correlation />
<Execution ProcessID="1100" ThreadID="4324" />
<Channel>System</Channel>
<Computer>JCLB-X300-126</Computer>
<Security UserID="S-1-5-19" />
</System>
<EventData />
</Event> -
Impossible d'installe​r le runtime Labview
Bonjour
J'ai un petit (ou gros) problème d'installation du runtime Labview 2009 (idem pour 8.5 ou 2010) depuis quelques semaines...
Lors de l'installation d'un runtime pris sur le site de NI ou un installeur (compilé sur mon PC), les PC cibles retournent une erreur de "Windows installer". Il mentione entre autre que je dois quitté le mode "sans echec" (dans lequel je ne suis pas bien sur !)
Les PC cibles sont reliés au réseau de mon entreprise et mis à jour régulièrement (XP SP3). Les tentatives d'installation ont été réalisées en tant qu'administrateur via une clé USB sur les ports mêmes de chaque PC où en récupérant l'exe sur le réseau.
Le service informatique a tenté de mettre de nouvelles versions de "windows installer" en vain. Seule la réinstallation compléte de SP3 semble éradiquer le problème.
Comme j'ai une 10aine de PC à modifier la dernière solution n'en est pas une !!!
Auriez vous une idée de ce qui géne windows ? Y aurait-il autre chose d'autre à mettre à jour que "windows installer" ?
Merci de votre aide.
YohLevMerci pour ce complément d'info.
J'ai essayé, mais malheureusement ça ne fonctionne toujours pas : j'ai lancer SafeMsi en mode sans echec, et je suis repassé en mode std pour l'installation du runtime.
Voici l'erreur affichée (invariable depuis le début) :
> "Impossible d'accéder au service Windows Installer. Ceci peut se produire si vous exécuter windows en mode sans échec"
Le rapport d'évenement (Event Viewer) :
> Type de l'événement : Erreur
> Source de l'événement : MsiInstaller
> Catégorie de l'événement : Aucun
> ID de l'événement : 1013
> Description :Internal MSI error. Installer terminated prematurely
Un des noms msi par exemple qui pose problème est : "NI LabVIEW Web Server for Run-Time Engine"
Par ailleur je suis retourné dans les "Services" et activé manuellement "Windows installer" comme vous me l'avez conseillé et en utilisant différentes configuration du type de démarrage (manuel, desactivé et auto).
Cela ne change rien au problème. Cependant on remarque que "windows installer" se désactive juste avant l'erreur !
Je ne peux pas dire si windows installer émet une erreur et s'arrête ou si quelque chose (antivirus, potection de sécurité,...) le stoppe et du coup le service étant interrompu une erreur apparait.
Je suis actuellement en congés pour 3 semaines. Nous ne pourrons rien tenter pour le moment.
Le service informatique doit toutefois essayer une installation en désactivant l'antivirus.
J'ai pu lire quelques info sur DCOM, RPC et des clés de sécurité qui perturbent l'installation des msi mais ça me dépasse un peu !
Quelles différences entre msi peuvent faire que certains vont s'installer et d'autres pas ?
Cordialement
YL.
Maybe you are looking for
-
I got this computer from a friend and it just will not start it gets to the start up screen and gets about half way and stops I tried everything I could read but no help
-
Secondary camera launches while answering a call
I have on occasion tried to answer a call and instead I am looking at a live image of myself in the seconday camera. Is it launching a video call without me wanting to (video calls not even supported in my area).
-
Strategy for mapping existing Java classes to db uing toplink
I have simple POJO, I used the JDev Class Diagram to add relations to the POJO and then tried to map using Toplink to Database. Is this the correct Strategy? or Should I directly use POJOs without the relationsships, to map to DB using TOPLINK?
-
Using Camera Raw in Photoshop /w More Than 1 Photo
Is there any way to use Camera Raw within Photoshop with more than one photo? I can open it with one photo by changing the "Format" to Camera Raw in the Open Dialogue box. Thanks, Mason
-
SBH52 Power Button Not Working
Hi, I recently bought SBH52; it worked for two months. The power button is not fucntioning at all. I tried holding for 1 min but still nothing happens. I am worring that if the battery drains it will never function anymore therefore I am charging the