Lesezeichen erstellt in InDesign CS4 - ohne Funktion in Acrobat

Hallo zusammen,
ich erstelle mit InDesign CS4 (PC mit XP) Kataloge, hinterlege Überschriften als Lesezeichen und exportiere die Dateien als PDF (Acrobat 9).
Beim Öffnen mit Acrobat werden die Lesezeichen zwar dargestellt, jedoch sind diese ohne Funktion, d.h. beim Klicken wird man nicht auf die Zielseite verwiesen. Ich habe gerade sämtliche neuen Updates für CS4 und Acrobat installiert, der Fehler ist immer noch da.
Die InDesign Datei besteht aus mehreren Sprachversionen, die als Ebenen angelegt sind. Bei den Exporteinstellungen für PDF wähle ich jeweils die ausgewählte Ebene an. Hier habe ich schon alle möglichen Einstellungsmöglichkeiten erfolgslos versucht.
In weiteren Foreneinträgen gibt es Benutzer mit ähnlichen Problemen. Bei mir funktionieren die Lesezeichen jedoch auch ohne Passwortschutz nicht.
Handelt es sich hier um ein Programmfehler von InDesign oder Acrobat?
Ich wäre sehr dankbar, wenn mir jemand einen Tipp geben könnte, da dieser Fehler mich seit längerem sehr ärgert.
Vielen Dank im Voraus!
Herzliche Grüße,
Adrian

Keine Ahnung, aber kann mich ganz vage daran erinnern, dass da mal in der Page ein Tip stand. Glaube es liegt wohl daran, dass die Elemente generell jeder Sprache erst zugeordnet werden müssen, sonst geht da nix. Irgendwo in dne Ebeneneinstellungen drin... Ansonsten verstehe ich aber nicht den Aufwand. Wenn richtige Absatzformate verwendet werden, wird doch eh jede Überschrift in ein Lesezeichen konvertiert. Ist vielleicht eher ein Problem, dass du's manuell machst und damit den Automatismen entgegenwirkst....
Mylenium

Similar Messages

Indesign CS4: Dateilinks in PDFs

Hallo!
Einige Fragen an die, die das schon mal hingekriegt haben
In Indesign CS4 kann man Hyperlinks zu Dateien erstellen. Das funktioniert aber nicht wie erwartet.
Sprich, der Hyperlink ist, da das Protokoll file: verwendet wird, einer der den Browser öffnet.
Nun will ich aber in einem PDF, das ich mit Indesign erstelle, einen Link haben, der ein anderes PDF öffnet.
Klar, ich kann sowas nachträglich mit Acrobat einfügen. Aber es sollte, verständlicherweise, durch Export des PDFs aus Indesign auch gehen, denn sonst viel Arbeit jedes Mal, wenn ich das Dokument aktualisiere.
Hat sich Adobe da nur vertan? Oder muß ich ein Plugin haben, das das korrigiert?
Ich meine, wenn ich eine Datei auswähle, dann wird neben file: der komplette Pfad mit angegeben, den ich zum Glück noch ändern kann.
Weil, der Anwender, der meine PDFs später bekommt, hat die alle zusammen in einem beliebigen Pfad. In Acrobat kann man Links erzeugen,
die direkt eine Datei aufrufen. Das müßte doch auch über Indesign gehen oder wofür wäre die Funktion sonst da?
Vielen Dank schon mal falls jemand eine Lösung hat.

Sicherheitsgründe? Aus einem PDF heraus etwas öffnen? Heutzutage Gang und Gebe. Und ein anderes PDF öffnen ist kein Ding der Sicherheit.
Generell ist Acrobat natürlich die Lösung, aber die Links, die ich in Indesign verwalten kann, kommen so nicht rüber nach Acrobat.
Mache ich ein PDF, sind das Hyperlinks auf Dateien. Ich kann dann im Acrobat aber nicht sagen "mach mir alle Hyperlinks zu Dateilinks", oder?
Wüßte zumindest keine Funktion. Zumal ich hier noch Acrobat 5 habe.
In Acrobat die Links zu erstellen ist extrem mühsam und müßte halt nach jedem Export des PDFs aus Indesign heraus wiederholt werden.
Oder ich müßte nur die veränderten Seiten exportieren, in dem vorherigen PDF die dann alle ersetzen und bei denen, die nicht ersetzt wurden und wo Links drin sind, passen die dann noch. Das ist nicht gerade, was man effektiven Workflow nennt. Mal angenommen, man hätte 50 Links in einem Dokument...
Das muß doch auch anders gehen!

Missing plug-ins for InDesign CS4? Fehlende Zusatzmodule für InDesign CS4?

Missing plug-ins for InDesign CS4? Fehlende Zusatzmodule für InDesign CS4?
Hello! Hallo!
I am working with CS4 on the Mac OS X, version 10.6.8. I created some InDesign files with it a couple of weeks ago. When I want to open them now again, it shows me a long list of plug-ins that I supposedly have to activate first or I need to buy the newest CS as an alternative.1. How did this problem come off? 2. How can I activate the missing plug-ins?
Ich arbeite mit CS4 auf einem Mac OS X Version 10.6.8. Habe damit vor einigen Wochen mehrere InDesign Dateien erstellt. Wenn ich sie jetzt wieder öffnen möchte, zeigt er mir eine lange Liste von Zusatzmodulen an, die ich angeblich aktivieren muss bzw als Alternative das aktuellste CS kaufen soll.
1. Wie ist das Problem zustande gekommen? 2. Wie kann ich die benötigten Zusatzmodule aktivieren?
Thank you all! Danke schön!

Actually, Indesign only says like "I can't open, because it was saved from a newer version" and does not list any extensions/plugins.
If you now make a new document, save it and open again - will it work?
Those plug-ins are usually enabled/disabled via the Adobe Extension Manager (Menü "Hilfe"->Erweiterungen verwalten).

InDesign CS4: Programm plötzlich in Englisch, nichts geht mehr

Nach dem Öffnen des Programms plötzlich alles in Englisch, nur noch Menüleiste verfügbar, kein Steuerungsbedienfeld, keine Werkzeugpaletten, keine Shortcuts, geöffnetes Dokument wie eingefroren. Nach Neuinstallation keine Änderung.
Adobe bietet kein Support für CS4 mehr an und empfiehlt Upgrade auf CS6 . Kann mir jemand weiterhelfen? Vielen Dank!

Sorry, bei mir ist nun das gleiche Problem passiert - Indesign auch nur noch in englisch und ohne Steuerungsbedienfeld, keine Werkzeugpaletten. Indesign CS4 läuft aber seit Jahren gut auf Vista. Was kann denn da passiert sein? Ich habe keine neue Software installiert. Allerdings wollte javascript ein update installieren - das hab ich zaer erlaubt, aber weiß nicht so recht, was meine Viren- u. schutzprogramme da wirklich durchgelassen haben.
Im Dateiexplorer haben die INDD-Dateien auch nicht mehr das Logo von Indesign, sondern das vom Acrobat und zum Öffnen wird auch nicht Indesign vorgeschlagen, sondern Acrobat.
Den Adope Support Advisor habe ich drüber laufen lassen. Er meldet:
Bei der Prüfung konnten keine Probleme festgestellt werden. Wenden Sie sich bitte an den Adobe Support.
Und:
Systeminformationen:
Betriebssystem = Windows Vista (TM) Home Premium Service Pack 2
Regionale Einstellung = de
What shall I do?

Can't Place a specific Word 2010 docx into InDesign CS4

I'm trying to use the Place command to bring the text from a specific Word 2010 docx into InDesign CS4.
I've successfully brought in several Word 2010 documents (docx extention) to InDesign CS4 documents using the place command.
I have one specific 30 page document (which is no loarger than others which have been successful), and when I use the place command with this file, nothing happens (and no text gets loaded onto the cursor for placement.
I've tried re-saving the word doc, even pasted its contents into a new Word doc and still can't get the Place command to work.
THere's nothing particularly unique about the file - doesn't have any odd embedded content, just a 30 page text document writtin in word.
Any ideas what could be going wrong or how to fix it?
I've tried restarting both Word and InDesign without any change (and the rest of my word files can be Placed without problem, so I imagine it's something specific to that file.
NOTE - re-saving in RTF format lets the Place command work but leaves a bunch of empty squares/boxes (not sure if these were for tabs or empty spaces or what really??)
Can work around this for now, but would like to know how to get the place command working with decent size Word Docs( docx for word 2010 if that matters).
Thanks for any help.

It turned out that for at least one particular document the OP had used some blank paragraphs as spacers at the start of the text, and that the style assigned to the second paragraph used a combination of left and right paragraph indents that was more than the width of the document page, sending the entire document (except for the empty first paragraph) into overset. I can't say for sure, but I think the Word styles might have been mapped to ID styles because I found no trace of the indents in the Word file itself, only in the ID document, and I had no trouble placing that Word file in my own ID test document. I did have some trouble placing another .docx file supplied by the OP in CS4, but not in later versions, and conversion to .doc solved that problem.

Button issue in InDesign CS4

I need to add text using interactive --> button option in InDesign CS4. This particular text has to appear when I mouse the text in PDF after generating from InDesign CS4. I don't want to add those text in PDF itself.
Indesign CS3 has button options to add text but InDesign CS4 does have that option to add text. Please guide me how to add text using Button in ID CS4.
What I did was: I have created a button and add text using button option and save it. When exporting PDF from ID CS3, I have enabled the option Interactive elements. After generating PDF from ID CS3 I have mouse over the text, whatever text I was inserted in button it appeared in PDF well.
But this option is not available in InDesign CS4. I hope you understand it clear now.
I have taken the screenshot below from InDesign CS3 and attached the same for your reference. This option does have in InDesign CS4. Please help me out in this regard.

I've answered this in the other thread where you asked the question.
Steve

Urgent - help with Text direction in InDesign CS4

Hello,
I use InDesign CS4 on Windows 7. It's a standard version (without options for right-to-left languages).
Whenever I make a new text frame, it seems to have a right-to-left "logic" of the text. The text types left to right, but the period in the end would go all the way right.
It also mixes up tabs. It looks like this:
Instead of:
Usually I get around it by pasting another correctly formatted text-frame or text, and it works.
Now I'm trying to create a new document with master frame (in order to be able to easily change the layout successively of a many-paged document), where I need to insert existing (formatted) text. But this text take this "right to left logic", whether I past the text, or even a whole text frame.
I could find nothing in the character/paragraph options to get rid of this.
I would greatly appreciate if you could help me.
with respect,
Jerusalem Nun.

This behaviour is normal. Changing the default property of any style, when no document is open, changes the style for every new document, but not for existing document.
Take a look what is your basic style where all other styles are build up on it, in your case, go to the paragraph style and look what is the basic style which was used.
If the default style was used (it is the one in brackets), you have always a problem. You should not use it in any case.
Because you don't have a ME version of InDesign you can't change direction directly, but you can create a new document with the default settings and the same paragraph (and character, table and cell styles) in a new document without RTL styles. Save this document, no content is required.
Go to the 'infected' document, open the paragraph style panel and in the panel menu take "Load all text styles", select the new document and overwrite with the incoming styles.
If necessary you might repeat it with the Table, Cell, Character and Object Styles, as all of them have some kind of direction settings.
I don't know how good your styles were created, you have to adjust your document. And I would strongly recommend—I repeat—I strongly recommend to work always with styles.

Text wrap type syntax is not supported in Indesign CS4

Dear all,
Text wrap type syntax is not supported in Indesign CS4. How to set the text wrap type in indesign CS4

Hey!
app.selection[0].textWrapPreferences.textWrapMode = TextWrapModes.CONTOUR;
TextWrapModes.BOUNDING_BOX_TEXT_WRAP
Wraps text around the object's bounding box.
1651729523 = 'bsds'
TextWrapModes.CONTOUR
Wraps text around the object following the specified contour options.
1835233134 = 'mcon'
TextWrapModes.JUMP_OBJECT_TEXT_WRAP
Forces text to jump above or below the object, so that no text appears on the object's right or left.
1650552420 = 'band'
TextWrapModes.NEXT_COLUMN_TEXT_WRAP
Forces text to jump to the next available column.
1853384306 = 'nxfr'
TextWrapModes.NONE
No text wrap.
1852796517 = 'none'
tomaxxi

What is the best way to work with Word documents in The InDesign CS4???

I work in Microsoft Word 2007 and all my documents have *.doc format.
What is the best way to work with Word documents in InDesign CS4???
David Blatner says to avoid copying and pasting text from Word instead of placing it (Ctrl+D).
How about pasting RTF or Text Document???
I want to make book's layout in ID CS4 and its main feature is that there is the left page with text and the right - with graphics.
So, as I understand to place the text on each page I must create for example 70 Word documents and place each item on 70 left pages???
It loks like wasting time. I sthere another way of making such layout??? What kind????

It's best to place any text.
You can have all of your text in one file and use auto-flow to add threaded text frames and pages as required (Hold down the Shift key when you click the loaded text cursor), but it's a little non-standard to have the thread only on one side of the spread from the auto-flow perspective, so you'll have to set up properly.
This is one case where a master text frame will work to your advantage. On your master page spread, add a text frame to the left page, but not to the right (or at least not threaded to one on the right -- for some other project you might actually want two independent text threads). Hold the loaded cursor over a frame on the left side of a document page and auto-flow. ID will add new spreads as necessary, but only put the text on the left side.
Peter

Minimized files make it difficult to open other files in InDesign CS4

When I minimize a file I 'm working on to the bottom of the screen in InDesign CS4 and try to open another file, the file I'm trying to open minimizes to the bottom also. It took many tries and a lot of frustration to realize I have to drag the minimized tab up to the left corner and drag the corners out to work on it. I get many interruptions during the day, and often like to minimize one project while I need to take care of a quick fix on another project. Is there a setting I'm missing that will correct this? I have not encountered this in previous versions of InDesign.

Well...what do you know?
All I can do is confirm the behavior. The new file isn't minimized but it is at the bottom of the screen.
You might want to file a bug report.
https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform&samcap=EWQQL&promoid=EWQQL
I've never seen it since I prefer the tabs.
Bob

Help! Can someone open and save a file in InDesign CS4 for me?? (idml to inx)

I need one file as .inx ... I have it as .idml. Does someone have Adobe InDesign CS4, so that I could e-mail it and you could e-mail it back as .inx? I would really appreciate that

I'm sending you an upload link by private message....

New problem printing from InDesign CS4 in Lion

After having great success with Aisolve's earlier fix on printing from InDesign CS4 after upgrading to Lion, I'm having a new problems after installing the OS X 10.7.2 upgrade last week. When I try to print from InDesign CS4 and Illustrator CS4 to my Lanier 445c/Ricoh C4500 at my workplace I get the following error message:
"Printing Error: The Adobe Print Engine has failed to output your data due to an unknown problem."
This seems like a different issue this time, as I'm able to print to my home printers, an HP LasertJet 2600n and an HP Photosmart C4270. I thought it might be a printer driver problems, but I've gone to Lanier's site and they don't have any new printer drivers for Mac OS X 10.7.
I also some research on Adobe's site, and found this message affecting CS1, 2 & 3. I tried the only fix that seemed to apply to me, which was re-naming/deleting the InDesign Deafults and InDesign SavedData files. (I have this problems even when I'm printing a text-only file without any graphics.) This fix didn't work.
I can print to the Lanier/Ricoh from Acrobat 9, and all my non-Adobe software just fine, so my work-around to date has been exporting to PDF and printing from there. My big problem is that I need the "Print Booklet" feature in InDesign for a big job I've got coming up this week. Can't do that from Acrobat. :-(
Any help would be greatly appreciated!

mmsteer,
I think I may be able to help you with this problem, which I was having with CS4 when I first upgraded to Lion, and others were having with CS3. This fix is courtesy of Aisolve on these discussion boards:
Remove the Adobe PDF PPDs from the following folders:
OS/Library/Printers/PPDs/contents/Resources/en.lproj,
OS/Library/Printers/PPDs/contents/Resources/Zh_CN.lproj,
OS/Library/Printers/PPDs/contents/Resources/Ja.lproj,
OS/Library/Printers/PPDs/contents/Resources/ko.lproj,
OS/Library/Printers/PPDs/contents/Resources/Zh_TW.lproj,
Be sure to go to your system Library, not your user Library.
Also, regarding my current problem, I spoke with an Apple tech person and found that the 10.7.2 upgrade apparently is the culprit, and is incompatible with wireless printing to my Lanier printer. I CAN print connected through USB. That's a work-around for now, but I'll need to contact Lanier about upgrading their driver for OS X 10.7.2.
Aisolve was helping me with this issue, too, and assures me that if I'm able to generate a postscript file (which I was), and able to generate a PDF by distlling it through Adobe Distiller (which I am), then I can safely assume that the problem lies with the hardware, in this case the printer driver. This lines up with what Apple told me.

Error 150:30 when I try opening InDesign (CS4) on my new macbook pro.

I keep getting Error 150:30 after setting up my new MacBookPro and restoring from backup. When I open InDesign (CS4) it says Licensing for product has stopped working. PLEASE HELP!

Hi there,
I'd try a fresh install. You can download the installer here: Download CS4 products
Please make sure you are signed in with Adobe ID first.
Here's more info on the error code: Error "Licensing has stopped working" | Mac OS
Let us know how it goes!
Amy

You can't open the application "Adobe InDesign CS4" because it is not supported on this architecture"

A day or two ago I went through installing Adobe InDesign CS4 on Leopard OS X.5.8. After what appears to be a successful installati
on, in launching InDesign CS4 the message " You can't open the application "Adobe InDesign CS4" because it is not supported on this
architecture" comes up". Calling in to support and speaking with the agent who read through previous posts, suggested to me that I
should try the same fix that has been suggested when I ran across an error when installing Adobe InDesign CS4 on another separate ha
rd drive externally connected to this computer running Snow Leopard OS X.6.1 for the error reading: "Damaged &/or incomplete install
ation" when launching afterwards. The support technician told me to first delete with the uninstall Adobe InDesign CS4, InDesign.
Following this I am told to run the CS4 Cleanup Utility. I restart the computer each and every time after running each of the utili
ties. Now I am told to install InDesign as a trial version from the DVD and after installation to go ahead & enter the serial numbe
r. When launching InDesign CS4 after installation got back the same error as before: "You can't open the application "Adobe InDesig
n CS4" because it is not supported on this architecture" comes up". Followed KB404711 article and no success. What else can be don
e to fix this issue?
This morning contacted Adobe Support regarding this response:
After having a detailed reserach on your issue i acme to the conclusion
that the problem you are having is not related to Adobe software but its
in fact related to your MAC version ( OSX-5.8). While reseraching your
issue i came across
to many forums where a lot of postings were about the similar error but
with different products the only comon thing was all the Errors were
with Mac machine , also when you check the system requirements for
Adobe Indesign Cs4
by going to the following link
http://www.adobe.com/products/indesign/systemreqs/?promoid=DRHXE you
will find the Mac OS version supported are from Mac OS X
v10.4.11–10.5.4. but we do support Snow Leoprad , so i would like
to advise to you to either contact your system manufacturer or upgrade
to Snow Leopard ( mac os x 10.6)
I have been told that my case is being sent to Level 2 agents and that it can take 24-48 hours for a response. In the meantime I decided to see what the Support Forums can do for me. Until then I am down. Thanks for the help.

In the application folder there is a folder 'Adobe InDesign CS4' within which there is just the application file. I would expect there should be more file there??
I've un-installed and installed again - still the same.
Even downloaded the dmg again and done thwe whole thing over again.

Missing fonts in InDesign CS4 - even when 'open' in Suitcase Fusion 3

Hi all, I'm running InDesign CS4 on a Intel Mac Pro (tower), about 4 years old, running OSX Snow Leopard (all updates applied).
Using Suitcase Fusion V3 for font management.
I have a document that previously had no font issues at all. Now when I open it InDesign throws up a 'Missing font' error.
I have the correct fonts installed and 'open' in Suitcase Fusion.
The font is available in Simpletext and Pages, but not InDesign and Illustrator.
The troublesome font was OK the other day and has been since it was installed.
I've not changed anything that I'm aware of... but now InDesign won't 'see' the font.
In the 'Find Font' dialogue box the 'Path' says it's 'Unkown or missing'.
InDesign can see the other weights in the font family (bold, italic etc) but not regular. And yet the entire font family is in the same folder on my hard drive.
I've tried deleting all the' Adobe.lst' files. No Joy.
I've run Font Doctor on the whole font family, its says it's OK.
I've tried re-installing the font from a back-up. Nada.
If anyone has any suggestions..... feel free to let rip!
As ever, I await your expertise and unstinting knowledge in these matters And, needless to say, I'll be mighty appreciative for it!
RP

Hi Bob, strangely... I've put the troublesome font, Dax (T1) Regular, in the Applications/Adobe InDesign CS4/Fonts folder and it seems to be working.
Never had to do that before.
Would be great to get back to 'normal'. If possible.
Although I have many duplicates spread across back-up drives and collected artwork folders, I've also tried to eliminate any duplicate 'open' versions. But the above solution is the only one that works at the moment.
RP
p.s. I also tried removing any AdobeFNT**.lst files, (where ** is a number) before the above work around. That didn't work either.

Lesezeichen erstellt in InDesign CS4 - ohne Funktion in Acrobat

Similar Messages

Maybe you are looking for