Lessons in the state of Iowa

Hey,
I'm completely new to Logic and have been trying to learn it on my own from an instructional DVD, but am having problems learning it this way. I would like to find someone to learn from. I can not find schools near the area of Des Moines, IA. I have talked to people who own studios in the area who agreed to teach me in exchange for cash and then they quit answering my calls before any money was exchange or lessons were given. I haven't found anyone on this site on the registry who is certified in Logic in Iowa. Traveling out of state is not an option because I am currently in college here. I would like to become certified eventually. I am using/have purchased Logic Studio. Any tips or suggestions? Or is there anyone in the area who would be willing to help me learn and prep for the certification tests? Thanks for reading.
Please contact me by email: [email protected]

Panimoznia wrote:
So basically I can make skype calls on my iphone without even having a subscription?
In order to call Israel landline you need a subscription from Skype, which you already have, but yes, you don't need a mobile operator to use Skype in WiFi zone. Same app is used on iPod Touch that doesn't support GSM calls over mobile operators, but it works with Skype since it can use WiFi.
Something similar to Tango and Viber, but as far as I know Viber doesn't let you call landline/mobile numbers, only other Viber members.
Andre
If answer was helpful please mark it with Kudos and if issue is resolved mark it with solution. This will help other users find this answer more easily. Thanks in advance!

Similar Messages

How can I reset my iMac to the state it was in yesterday with Time Machine

Please help. I am trying to do something I thought was simple but I cant work out how to do it...
I need to reset my iMac to the state it was in yesterday evening using my Time Machine backup.
Yesterday I was on OSX 10.8 now I am on 10.6. The iMac was working fine yesterday.
Many thanks in anticipation...

This solved my problem! Great advice thanks! You have saved me from doing an unnecessary backup restore and re-upgrade which is what I was being advised to do elsewhere. Your fix took a matter of minutes! I cant thank you enough.
I still dont know how my 10 year old son and friends managed to do this in the first place as his account has parental controls and is restricted. I suppose they must have held a key on the keyboard during start-up and selected the wrong options!
Anyway, a lesson learned by all.
Thank you so much again for being inciteful with my question.

No state of Iowa as a choice!!!!

I started the process to purchase an online number for the U.S. while I work in China and the first step is to select the state from which you want the number based in. I live in Iowa and it is not a choice from which to choose. What gives skype? is this a joke on us poor country folk? I can't buy your product if you don't offer it.

I want Iowa as a choice to - area code 641

How check the reason of IOWait(R) (041)

Hi,
I'm checking my system blocks and crash, and monitoring with x_cons i see many times:
T392 11 -1 User 0* IOWait(R)(041) 0 0 6793246(s)
T445 12 -1 User 0* IO Wait (R) 0 6 2 10520348(r)
how i can check what IO that thread is waiting for?
regards
Clóvis

Hi Clóvis,
since these are User tasks (that is SQL sessions) these IOWAITS occur, because the pages required to process the current SQL command weren't found in the data cache.
The difference between both kind of IOWAITS here is, that IOWAIT(R)(041) simply means, that the specific page is already currently beeing read by another process.
So, if these two are the only processes doing IO right now, it might be that T445 actually reads the page from disk, while T392 waits for it to complete.
More important than what page is read here is what statement is executed in both sessions. (this statement can be different though).
You can know that by enabling the COMMAND monitor before the statements are started or running a kind of trace for the SQL commands issued from the application side.
By checking the statements and their execution plans you might find options to reduce the number of pages that need to be touched.
Hope this points you to the right direction.
regards,
Lars

Can I return my iPad in the states if I bought it at an apple store in the UAE because I wasn't aware it didn't come with FaceTime at the time?

Can I return my iPad in the states if I bought it at an apple store in the UAE because I wasn't aware it didn't come with FaceTime at the time?

Your only option is to sell the iPad and buy a new one.
Apple Reuse and Recycle Program
http://store.apple.com/us/browse/reuse_and_recycle
How to Sell Your Old iPad http://tinyurl.com/85d69lk
Other sources to sell.
eBay Instant Sell http://instantsale.ebay.com/?search=ipad
Sell and Recycle Used Electronics - Gazelle http://www.gazelle.com/
For instant gratification in selling a used iPhone or iPad, Gazelle’s Gadget Trader, an iOS app, is tough to beat. In seconds it detects the device and reveals how much it is worth in good condition. Tap the Sell This Phone to Gazelle button and the deed is done.
Sell Electronics for Cash - Next Worth http://www.nextworth.com/
Buy My Tronics http://www.buymytronics.com/
Sell Your iPad http://www.sellyourmac.com/mac-product-guides/ipad.html
Totem http://www.hellototem.com/
 Cheers, Tom

Closing the Statement returned from ResultSet.getStatement does not work

With the ORACLE JDBC driver, I have discovered (the hard way) that it is essential to explictly close a Statement object after use. (http://www.orafaq.com/node/758 was useful here).
Failure to do so leaves the Cursor open and eventually your application will fail with the ORA-01000 Too Many Cursors error.
That works well if your code still has access to the Statement object which it created when it has finished with the results from executing the Statement.
But, I've inherited some code where this is not the case. The results in the form of a ResultSet are passed through a few layers before it is eventually processed and can then be closed. The original Statement object is no longer available.
I thought then that the solution would be use the ResultSet.getStatement method and to close that Statement.
BUT that doesn't seem to work. The number of cursors continues to go up.
Any ideas, anyone?
(I'm using ojdbc6.jar and ORACLE 10g Express.)
Edited by: Termind on 22-Jul-2010 10:00

Copied in second message as first gets unreadable...
eclipse.buildId=I20070625-1500
java.version=1.5.0_18
java.vendor=Sun Microsystems Inc.
BootLoader constants: OS=win32, ARCH=x86, WS=win32, NL=de_DE
Command-line arguments: -os win32 -ws win32 -arch x86 -data D:\Dokumente\Projekte\workspace
Error
Tue Sep 29 11:30:49 CEST 2009
Unhandled event loop exception
java.lang.NullPointerException
at org.eclipse.jpt.db.internal.ForeignKey.getReferencedTable(ForeignKey.java:104)
at org.eclipse.jpt.gen.internal.GenTable.addReferencedTablesTo(GenTable.java:106)
at org.eclipse.jpt.gen.internal.GenScope.buildReferencedTables(GenScope.java:169)
at org.eclipse.jpt.gen.internal.GenScope.configureManyToManyRelations(GenScope.java:81)
at org.eclipse.jpt.gen.internal.GenScope.initialize(GenScope.java:46)
at org.eclipse.jpt.gen.internal.GenScope.<init>(GenScope.java:33)
at org.eclipse.jpt.gen.internal.PackageGenerator.<init>(PackageGenerator.java:48)
at org.eclipse.jpt.gen.internal.PackageGenerator.generateEntities(PackageGenerator.java:38)
at org.eclipse.jpt.ui.internal.generic.EntitiesGenerator$GenerateEntitiesRunnable.run(EntitiesGenerator.java:129)
at org.eclipse.core.internal.resources.Workspace.run(Workspace.java:1797)
at org.eclipse.core.internal.resources.Workspace.run(Workspace.java:1779)

Tracking Memory usage on iOS using the Stats class

I've been checking memory usage on an app I'm developing for iOS using the Stats class https://github.com/mrdoob/Hi-ReS-Stats ( http://help.adobe.com/en_US/as3/mobile/WS4bebcd66a74275c3-315cd077124319488fd-7fff.html#WS 948100b6829bd5a61637f0a412623fd0543-8000).
I added the Stats class to my project and redeployed and, yikes, memory usage reported in Stats creeps up (pretty slowly) even when there's nothing happening in the app (just showing a loaded bitmap).
To try and track down the issue I created a project with a test class that extends Sprite with just this single call in the constructor :-
addChild( new Stats() );
I deployed it to the device to check that it didn't gobble any memory.
But I was Suprised to watch the memory usage creep up and up (to approx 5) before some garbage collection kicked in and takes memory back down. I left it running and then it crept up again to over 7.5 this time before being kicked back down to just below 3.
So 2 related questions that I'd appreciate any feedback/observations/thoughts on :-
1 - Is this normal (i.e. memory creeping up when there's nothing other than Stats in the project) ?
2 - What is the best way to monitor memory usage within an app ? Is Stats good enough - is Stats itself causing the memory usage ?
All the best guys !

Also see thread (http://forums.adobe.com/message/4280020#4280020)
My conclusions are :-
- If you run an app and leave it idle, memory usage gradually creeps up (presumably as memory is being used to perform calcs/refresh the display etc)
- Periodically the garbage collection kicks in and memory is brought back down
- This cycle could be in excess of 5 mins
Run with your real app and memory will increase and be released much more rapidly/regularly.
- It's probably worth performing initial checks by running on your desktop to iron out any initial problems

Enterprise Manager is not able to connect to the database instance. The state of the components are listed below.

Dear all,
I have trouble to connect em console to database instance. My database is 11.2.0.3 and before this I did the patching from version 11.2.0.1, and now i cannot get fully functionality of em console.
error is:
Enterprise Manager is not able to connect to the database instance. The state of the components are listed below.
It shows that agent is connected, database and listener is up.
I did recreation, dropping and recreating with emca, but no success.
Did anyone have similar problems with em console?
Regards,

You need to first of all, Connect to the Database as SYSDBA (because your were not connected), then start the database (because it is not started).
If you already used the username and password in the command prompt and you are sure that the database is already stared, then you need to set the ORACLE_SID before you open SQLPlus. This is because if SQLPlus does not know the SID you are connecting to, it simply thinks it is not up or has no service hence the message "Connected to an idle instance".

I just changed my residence to the US and now I cant register my new US credit card on itunes cause the state list doesnt match to the US states, what should I do?

I just changed my residence to the US and now I cant register my new US credit card on itunes cause the state list doesnt match to the US states, what should I do?

Your credit card info, billing address must be the same country as the iTunes store country you registering.
For example, you can’t have a credit card from a U.S. bank with a U.S. billing address registered in the iTunes store for China.
I tried to change my payment information too, but it happened the same, I can change the information but when I get to the state part, it only shows the other country states
Remove all payment info and save it.
Then change the iTunes store country to U.S., add a U.S. credit card with a U.S. billing address.
As previously suggested, if this does not work, contact iTunes store support.
-> http://www.apple.com/support/itunes/contact/

Questions on Xontrol--How to update the state and data

Hello, everyone. I am new to use the XControl. I don't understand how the program in the facade update the "state" and "Data" after we click the button. I cannot do that, please give me some help on the XControl.
My vi is in the attachment.
Message Edited by McArthur on 03-24-2010 02:19 AM
Working...
Attachments:
Button.zip ‏51 KB

McArthur wrote: Now I understand the reason why the state can not update, because I didn't do as TCPlomp mentioned. It seems working now....
I mentioned this too, however without a pretty picture.
quote:
When you modify data or state, you need to update the action cluster to indicate that fact.
McArthur wrote: The example is just a dummy, not really make sense.
The example is really quite good and shows these things too as well as many other important points. Please try to fully understand it.
I would strongly advise you to also look at my other suggestions. You still haven't explained the purpose of the xcontrol. I am still curious.
LabVIEW Champion . Do more with less code and in less time .

Updated image is not continuing with the State Restore Phase

MDT 2010 Update 1
Our MDT guru quit about a month ago.   I've done basic stuff here and there
But have never updated an image..
1. I deployed our current image to a Vmware workstation. Added about 200 updates. Nothing else done.
     I than rebooted and logged in as local admin and ran litetouch.wsf in a command prompt.
     And ran the "Sysprep and Capture image" task sequence.
     This sysprep'd and imaged with no errors to the captures folder.
2. I than moved that updated image to the "Operating Systems" folder on the deployment share. Renamed the old .wim file and renamed the new one to be the same as the old one..    (Not completely sure this is the correct
way to do this) But couldn't find any info on how this is done)
I than proceeded to reimage a machine with the updated .wim.
It gets all the way to the State Restore phase and just stops.   After the final reboot. I logon with the local admin account as usual and it does not continue.   the Minint and _SMSTaskSequence folder are still there.. If
I let it set for hours nothing happens...
I compared the BDD.log file for both images.    They seem to be identical up until the State Restore phase is supposed to start.
I see NO errors in the BDD log file...
So I am lost as in what to do to try and remedy this issue..
Info From Sharepoint

Its the new WIM that is not continuing...
I did try the import.   and it did the same thing.
here is the ending of the BDD.log file
ZTIConfigure COMPLETED. Return Value = 0   ZTIConfigure   4/22/2014 12:00:53 PM   0 (0x0000)
ZTIConfigure processing completed successfully.   ZTIConfigure   4/22/2014 12:00:53 PM   0 (0x0000)
Microsoft Deployment Toolkit version: 5.1.1642.01   ZTIdrivers   4/22/2014 12:00:53 PM   0 (0x0000)
The task sequencer log is located at X:\windows\TEMP\SMSTSLog\SMSTS.LOG. For task sequence failures, please consult this log.   ZTIdrivers   4/22/2014 12:00:53 PM   0 (0x0000)
Write all logging text to \\bimaemg1mdtx64\deploymentshare$\MININT-C1QJ4FN   ZTIdrivers   4/22/2014 12:00:53 PM   0 (0x0000)
Validating connection to \\bimaemg1mdtx64\deploymentshare$\MININT-C1QJ4FN   ZTIdrivers   4/22/2014 12:00:53 PM   0 (0x0000)
Already connected to server bimaemg1mdtx64 as that is where this script is running from.   ZTIdrivers   4/22/2014 12:00:53 PM   0 (0x0000)
No driver copying needs to be performed during the Lite Touch postinstall phase.   ZTIdrivers   4/22/2014 12:00:53 PM   0 (0x0000)
Updating downlevel OS configuration.   ZTIdrivers   4/22/2014 12:00:53 PM   0 (0x0000)
Vista identified, skipping update of Device Path   ZTIdrivers   4/22/2014 12:00:53 PM   0 (0x0000)
ZTIdrivers processing completed successfully.   ZTIdrivers   4/22/2014 12:00:53 PM   0 (0x0000)
Microsoft Deployment Toolkit version: 5.1.1642.01   ZTINextPhase   4/22/2014 12:00:53 PM   0 (0x0000)
The task sequencer log is located at X:\windows\TEMP\SMSTSLog\SMSTS.LOG. For task sequence failures, please consult this log.   ZTINextPhase   4/22/2014 12:00:53 PM   0 (0x0000)
Write all logging text to \\bimaemg1mdtx64\deploymentshare$\MININT-C1QJ4FN   ZTINextPhase   4/22/2014 12:00:53 PM   0 (0x0000)
Validating connection to \\bimaemg1mdtx64\deploymentshare$\MININT-C1QJ4FN   ZTINextPhase   4/22/2014 12:00:53 PM   0 (0x0000)
Already connected to server bimaemg1mdtx64 as that is where this script is running from.   ZTINextPhase   4/22/2014 12:00:53 PM   0 (0x0000)
Property PHASE is now = STATERESTORE   ZTINextPhase   4/22/2014 12:00:53 PM   0 (0x0000)
ZTINextPhase COMPLETED. Return Value = 0   ZTINextPhase   4/22/2014 12:00:53 PM   0 (0x0000)
ZTINextPhase processing completed successfully.   ZTINextPhase   4/22/2014 12:00:53 PM   0 (0x0000)
Property DestinationLogicalDrive is now =    LiteTouch   4/22/2014 12:00:53 PM   0 (0x0000)
LTI initiating task sequence-requested reboot.   LiteTouch   4/22/2014 12:00:53 PM   0 (0x0000)
Info From Sharepoint

What's the state out of the box?

Got my board today. Going through the instructions at
https://ms-iot.github.io/content/SetupGalileo.htm and I'm confused. I try to apply the image to the SD card and am told that the card needs to be empty. Sure 'nuf looks like a full Windows install is sitting on it. Yet I'm being told in Setup to apply another
one - so what's on it?
I tried plugging it in to my PC via the Ethernet cable, etc, and the Galileo Watcher picks up nothing.
Following the instructions on Intel's site wants Arduino to be installed so the firmware can be updated - is this all accurate?
I get the feeling the Setup docs and How-Tos need some *serious* going over.
http://bc3te.ch/brandonh

The instructions seem fairly simple.
I'm not certain how you could be applying an image to an SD card and be told that the SD card needs to be empty when the instructions clearly state "Format the microSD card with the Fat32 file system" which would make the SD card empty.
And if the instructions are followed they probably work. I don't see anywhere in the instructions to use the microSD card OOB. Do you? Or is there some reason you feel the need to do that? Regardless of what the instructions say? Just because you have to
for no apparent reason? Or you cant plug the microSD card into your PC to see what the state of it is OOB?
Write Windows to the microSD card
Format the microSD card with the Fat32 file system.
Open an Administrative command prompt:
Open the Start screen
type cmd
right click or tap and hold on Command Prompt, then select
Run as Administrator
If you are running on Windows 7 please follow
these instructions before proceeding.
In the command window, type the following:
La vida loca

How can I limit the fonts in the Character Map (charmap) and reinitialize the state after use?

In a WPF application I have a RichTextBox in which users will be inserting text. I also must give the user the ability to insert characters. To do so I have called up charmap.exe using
Process charProcess = new Process();
ProcessStartInfo startInfo = new ProcessStartInfo();
charProcess.StartInfo.FileName = strCharmap;
charProcess.Start();
etc., and it works fine. There are several problems I have basically with charmap, however, not with WPF. The first is that because of the subsequent use of the user’s insertion in the RTB, I must restrict the font to “Ariel Unicode
MS.” So far all I have been able to do is instruct and warn the user not to change fonts and
change back any font change that occurs as a result of use of “Advanced view” features.
Question number one is, how can I restrict the fonts loaded into charmap to this one font? The second problem is that if another font is called up, or the “Advanced view” state of charmap is closed, or a “Group by” feature is opened, these choices will
be retained for the next user that opens charmap. How can I initialize the state of charmap for each new user with the correct font and “Advanced view” features showing. It is said,but in old posts, that reinitialization occurs for all but administrative users,
but this seems to be no longer true. I have tried permission changes in charmap’s Properties, but I can’t get the necessary reinitialization to occur even if user’s don’t have modify permission. Can one use a .ini file, or the .mui file, or make Registry changes
to accomplish my goals. There seems to be a warning in the .mui file about changing fonts, but is it cancelled? I am using Windows 7 and C#.
I have looked at other character maps but they are either too complicated for the casual user, or they have no search engine and advanced features, or they have the same problems.
I am pretty much a novice with respect to the Windows files use and WPF, so please be fairly clear, complete, and prescriptive in your answer. Also so that I and others can learn, it would be nice to have an explanation of why one does whatever you suggest.
Your help is appreciated.

Hi,
Thanks for your post!
According to your description, I am afraid your problem is out of support in C#language forum. So i move your thread to off-topic forum!
Best Wishes!
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. Thanks<br/> MSDN Community Support<br/> <br/> Please remember to "Mark as Answer" the responses that resolved your issue. It is a common way to recognize those who have helped you, and
makes it easier for other visitors to find the resolution later.

HT1212 MY PHONE IS LOCKED MY STEPSON SET UP A ICLOUD ACCOUNT AN NOW HE DOES NOT KNOW THE USERNAME OR PASSWORD AN I HAVE TRIED HOOKING IT UP TO ITUNES AN CAN NOT RESET ANYTHING. WHEN U TURN THE PHONE ON IT SAYS HELLO AN THEN ASK FOR THE STATE AN THE WIRELE

HEY MY PHONE IS LOCKED AND MY STEPSON STEP UP A ICLOUD ACCOUNT AN KNOW HE DOES NOT KNOW THE ICLOUD USERNAME OR PASSWORD. WHEN I TURN THE PHONE ON IT WILL SAY HELLO AN ASK FOR THE STATE AN THE ASK FOR THE INTERNET PASSWORD. THEN IT ASK FOR THE ICLOUD AN THE PASSWORD AN WE DONT KNOW IT TO GET THE PHONE UNLOCKED. I HAVE TRIED HOOKING IT UP TO ITUNES BUT IT DOES NOTHING JUST GOES BACK TO THE SAME SCREEN. SO CAN U PLEASE HELP ME UNLOCK MY PHONE. IVE BEEN THE THE VERIZON STORE AN THE THE APPLE STORE AN THE SAID THEY CANT UNLOCK IT THAT I HAD TO GO ON AN WEBSITE IFORGOT.APPLE.COM AND EXPRESSLANE.APPLE.COM AN WHEN U PULL IT UP YOU DONT KNOW WHAT TO GO ON BECAUSE THERE IS SOME MANY TO CHOOSE FROM SO IT DOESNT HELP ME AT ALL. ITS LIKE THAT ON BOTH WEBSITES THEY FAIL TO TELL U THAT THERE IS ALOT TO CHOOSE FROM. IF THEY WOULD GIVE YOU THE ONE TO GO TO START WITH U WOULDNT BEEN ON THE COMPUTER FOR HOURS AN HOURS AT A TIME.

drop the CAPS thats rude.
iforgot.apple.com there is a link for find my apple id click here
https://iforgot.apple.com/appleid?language=US-EN&returnURL=https://appleid.apple .com/cgi-bin/WebObjects/MyAppleId.woa&app_id=93&app_type=ext
Peace, Clyde

HT204053 I had been in Canada and created my apple ID for my phone there. Since I am back in the States and had to create a second apple ID. how can I deactivate one of them can use my normal email address?

I had been in Canada and obtained my i4s. I created my Apple ID using my normal email address. I returned to the States and still had my Canadian number. I was told the Canadian version of the iPhone 4s would not work with any phone company in the States, so I had to purchase yet another phone and create another Apple ID.
I have since deactivated the Canadian number. I cannot deactivate that Apple ID though. So I am stuck with two (2) Apple IDs. (not to mention 2 iPhone 4s)
I would very much like to only have one assiciated with the phone I have now. Is there a way to deactivate one of the Apple ID accounts?

Welcome to the Apple Community.
I'm not sure you needed to purchase a new phone, you certainly didn't need to create a new ID.
However now you have done, you can't de-activate the old account, just log into your new one and stop using your old one.

Lessons in the state of Iowa

Similar Messages

Maybe you are looking for