Let applications choose between WiFi and Ethernet

Hi Forum,
So basicly I'm connected to a secure ethernet line with limitations, besides that I'm also connected to wifi with no limitations.
I want to let apps choose between wifi and ethernet, is there any way to do so ?

(A repost of something I posted elsewhere - trying to help others)
If it helps you at least a little, in the Podcast App, playlists are now called "My Stations". You can add entire podcasts to Stations (and create new Stations), or you can add individual episodes to the "on-The-Go" station.
Not intuitive, and not as good as having the podcasts back with the music, but it gets the job done till Apple listens to the users again and changes this back.
Cheers!
Ken

Similar Messages

How does iPad choose between wifi and 3G when both are 'on'?

Easy peasy question.
I have 02 and Wifi going on my iPad. I know I can use 02 out and about and I know I can use wifi at home etc.
But when I'm at home how do I make sure I'm using my wifi for data and not my cellular connection???
I've been turning my cellular to 'off' when at home, just in case, but I don't want to have the faff of turning it off and on, so it would be nice to know how the iPad chooses between wifi and 3G when both data access points are active.
Also I've had no wifi troubles at home at all. so far... The acid test will be setting it up at work as they have proxyies for everything, but obviously I don't have proxies at home. I'm not sure if the settings screen can cope with different proxies dependent upon different wifi networks... * grin *

In the status bar I have
a signal strength indicator then 'O2-UK' then the 'fan' No mention of 3G.
I'm guessing you're going to say that when 3G is showing then 3G is being used for data?

Let me choose between Podcasts and Music!

I realize that there are a number of threads on this, but FFS! There is no reason to NOT allow users to listen to podcasts in the Music app! The functionality was already there, we are used to it (and even like it, as it allows for problem-free mixed playlist creation), the Podcasts app is sub-par, and I download and organize both music and podcasts (and audiobooks) using iTunes, so why separate them on the phone?!

(A repost of something I posted elsewhere - trying to help others)
If it helps you at least a little, in the Podcast App, playlists are now called "My Stations". You can add entire podcasts to Stations (and create new Stations), or you can add individual episodes to the "on-The-Go" station.
Not intuitive, and not as good as having the podcasts back with the music, but it gets the job done till Apple listens to the users again and changes this back.
Cheers!
Ken

MB Air cannot see TC 1T '09 while connected via WiFi and Ethernet.

I have a TC 1T 2009 7.4.1 that I have set up successfully with MB Pro and MB White. However I cannot set it up with MB Air v.1 which is connected to TC via WiFi AND Ethernet cable. Internet is fine (Safari) but no TM - when I run APU 5.4.1 it cannot discover the TC it is connected to.
I tried connecting after hard-reset (poke/power on), it would see the TM but then hang forever reading the configuration. So I set it up with MB Pro and MB White and both are now working fine with TC/TM. Then I tried MB Air and it failed.
The TC is connected via ethernet to Sagem router (bridged mode) which supplies WAN and DHCP, it has its own WiFi as well.

And by the way, Hi Everyone, how rude of me not to greet you in the post.
Thanks for any help!

I have a good connection thru both wifi and ethernet but cannot get to the internet

I have a good connection thru both wifi and ethernet but cannot get to the internet

Which model iMac do you have? Which OS system is currently installed on your comp?

Weird problem--lost network connectivity wifi and ethernet. Intermittent

I'm posting to this board because my Time Capsule is my router and I suspect this is a router table issue since it affects both wifi and ethernet computers in my household. It only affects the two computers on 10.8.3 at the moment.
Either just after waking from sleep or after working for quite some time on either of these computers, web sites will stop loading. It gives an SSL error but they are not secure sites. Mail stops coming in as well. This is true for any browser. The network connections test as "green" with the built-in diagnostics tools. The only fix I have found is to either restart the machine or simply log out and log back in from the user account. It is very frustrating because we are often working in real-time online. Standard things we use that are affected are Google Docs for schoolwork etc. and my son's Minecraft playing. It is especially frustrating for him because he could be in the middle of a "project" with some of his friends online and this essentially crashes what they were doing.
I have called Apple but it is very hard to explain the issue in an effective manner.
Both machines are logged in as managed accounts but unrestricted access. I just don't like my primary account to be an admin account. I don't want my kids to install stuff without my permission and the managed user allows me to inspect the logs of sites they have visited at the system level, even if they turn on private browsing in Safari or incognito in Chrome.
Does anyone here have any ideas?

It is possible that I upgraded the firmware on the router right when I upgraded the machine to Mountain Lion but I really don't think I did that. I also have a version of the OLD airport utility so I can see the Time Capsule in much more detail.
Linda
If it hasn't reminded you to upgrade the firmware in the last day or so it is already on 7.6.3.. Apple stuff is very insistent on upgrades..
In the old utility (excellent) take it back to 7.6.1. And turn off weekly upgrade reminders.. this will reduce the instances of upgrade reminders to weekly instead of daily.

Choosing between external and partner application and problem with login

We have an application on Oracle App Server 10.1.3.3 and we have an OID server.
I had taken this for granted that I should define the application as 'Partner Application' and not external application for single sign on.
Now that we need the 'PASSWORD' retrieved by application, we are considering defining it as an external application.
There are at least two problems I have encountered defining the application as external:
1. 'pageConfig:serverDate' is among the login form's inputs in the login page, but I can't set it in orasso 'Edit External Applications' page
2. After login using SSO as external application and when I click on the application's new link, the login page is shown with the username and password field filled, but I have to click on login button anyway (no automatic and invisible login).
I will be very grateful if someone gives a general view on the differences between external and partner, whether in this case external has to be used or partner and finally give some comment on my specific problem with login button and manual login.
Thank you

Just some information :
- The problem with LOGIN page exists. I don't have that problem with for example GMAIL when defined as external application, but with my applications in Oracle Application Server.
- There is also another thing I don't understand. The link to external application is something like:
javascript:open_jwindow('../ealogin?ID=76D4766','76');
and couldn't be executed outside pls/orasso
in other words we can't give that to our users, can we? They should login to orassso and see that?
We don't want to involve them in Identity Management...
Any help is appreciated....
Regards

Bonding wifi and ethernet

There's a Windows software program that can aggregate any kind of internet connection called Connectify Dispatch. I am very interested to be able to bond my internet connections between wifi/iPhone USB and Ethernet on my MacBook Pro (if at all possible)
Why? The ethernet connection is sometimes really good and other times really bad, the same goes for the iPhone. Combining them will hopefully bring the best of both worlds.
I know the LACP protocol is a problem, but if I can tunnel/mask/virtualize/pseudo the iPhone connection as another Ethernet, would it work?

Oh ok. I'm sorry that I couldn't help you! My final reccomondation is that if you wanted to by a wifi hotspot. Here are some reccomendations: http://www.verizonwireless.com/b2c/store/controller?item=phoneFirst&action=viewP honeOverviewByDevice&&deviceCategoryId=13
Good Luck!
Hope this helps!

What is the difference between wifi and the 3G plus wifi?

I want to get an ipad for myself and I have no idea what the difference is between the regular wifi and the 3G plus wifi. If somebody could explain the difference to me so I can decide which one to get I would greatly appreciate it. Thank you in advance!

On the iPad if you use wifi you have to be close to a wifi access point either in your home or at a location such as Starbucks or Paanera. This connection normally will transfer data faster than 3G. However, 3G will give you access in areas where there is mobile telephone service from Verizon or AT&T albeit at a slower data transfer rate than wifi.
Wifi will be cheaper than 3G since you'll have to subscribe to 3G service from Verizon or AT&T.
BTW, you won't be able to use "3G plus wifi" at the same time.

Choosing between 720p and 1080p on Mini connected to Sony HDTV (1920x1080)

I have a late 2009 Mac Mini and a SONY HDTV and had no difficulties at all in hooking them up. I just connected the Mini Display Port to DVI connector which ships with the MAC Mini to a Belkin DVI to HDMI cable (also available from Apple Store) and connected the HDMI to my TV. I switched on the TV, selected the correct HDMI input, then switched on the Mac Mini and could see the picture immediately. I was missing the menu bar at the top so went to SYSTEM PREFERENCES and then DISPLAYS and the OPTIONS tab, and unselected OVERSCAN, and that gave me a perfect picture (slightly smaller than full screen but perfectly adequate as far as I'm concerned).
By default my resoluton was set at 1080p (presumably the Mac detected that the native resolution of my TV is 1080p). The DISPLAYS box shows a number of resolution with a little TV screen icon beside them, as if suggesting those resolutions for use with the Sony. It shows 480i, 480p, 720p, 1080i and 1080p. There are also lots of others without TV icons beside them.
The only problem I found is that 1080p made it quite difficult to read text on my screen, even though it's not very far away from the sofa. My eyesight is very good but I couldn't read the screen comfortably when surfing the net or even when changing settings etc. I swiiched, therefore, to 720p and this produces a very comfortable size of text for using the MAC.
My question is whether it really makes such a big difference whether one chooses 720p or 1080p, as I really can't see much difference for playback of video from Hulu or other streaming websites. Even when I played a DVD movie from the Mac Mini superdrive, the difference in quality was hard to detect. I guess if I tried viewing Full 1080p HD material, there would be some difference, but how much of such material is available on the net anyway? I take it that switching between 720p and 1080p wouldn't cause any harm, if I chose to do so occasionally for watching any Full HD movies that I rip?
Look forward to hearing views!

Hi- I also picked up a mini a week ago, and have it hooked up to my Sony HDTV via HDMI, just as you. The same thing happened the first time I connected the mini to my tv- with overscan on, the top and bottom of the screen were cut off.
The solution is to pick up your Sony remote, go to the onscreen menus, and make sure that 'full pixels' option is selected. When you do, the screen will be absolutely perfectly aligned.
I mention this because while in overscan mode, I find that the Sony makes an absolutely beautiful screen, and text is quite easy to read, albeit a bit small.

Use of Push Notifications between Wifi and Cell Data

Is there a way to set the phone to automatically have push notifications turn ON when you're on WiFi and OFF when you're on cell data? I dont mind recieving them, but it would be nice if there was a preference to recieve them only when on WiFi. Anyone know how to do that?

wjosten wrote:
The iPhone priority for a data connection is: WIfI>3G>Edge>GPRS. Note: While in sleep mode, unless connected to a power source, iPhone will disconnect from available WiFi & use cellular data for all data needs.
But my iPhone 4 definitely is using 3G when wifi is available, even switching to it when having been on wifi. For me this has only been happening since we started receiving 3G and 4G in our area. Used my full 200 meg data plan in one day when I normally hadn't come close to that all month. My settings were definitely set for using wifi and wifi was definitely available (was using it with my laptop). My internet is only 1 mb so I wonder if it chooses 3G or 4G because of speed. If so, this is a problem for me. If not, there is another problem.

Application difference between jdic and jdicplus

Hi,
what is difference between jdic and jdicplus.. In my application i used jdic for integrating flash with java. Now i would like to change jdicplus. Is it correct move..?
Pl tel the advantages of jdicplus..

saranv wrote:
what is difference between jdic and jdicplus...Is it correct move..?I suspect that if you have to ask the question, the answer is probably: Not yet.
Winston

While listening to music in my car, I don't have the option to choose between bluetooth and headphones anymore. Why?

On IOS 6 and earlyer, I use to be able to choose between the bluetooth or the headphone jack. Now, I can only play music true my bluetooth and I can't pause the music. Anybody has a solution?

Basic Troubleshooting Steps when all else fails
- Quit the App by opening multi-tasking bar, and swiping the App upward to make it disappear. (For iOS 6, holding down the icon for the App for about 3-5 seconds, and then tap the red circle with the white minus sign.)
- Relaunch the App and try again.
- Restart the device. http://support.apple.com/kb/ht1430
- Reset the device. (Same article as above.)
- Restore from backup. http://support.apple.com/kb/ht1766 (If you don't have a backup, make one now, then skip to the next step.)
- Restore as new device. http://support.apple.com/kb/HT4137 For this step, do not re-download ANYTHING, and do not sign into your Apple ID.
- Test the issue after each step. If the last one does not resolve the issue, it is likely a hardware problem.

Wifi and ethernet are not working in windows xp.

Hi I had to reformat my computer so I installed leopard 10.5 on it and then installed xp via bootcamp before updating to 10.5.6. WHen Im in windows xp It wont recongize my ethernet or wifi and I can not either to work by going to control panel I mean the icons are not even showing up. I cant update windows or anything since it has no internet.
Macbook pro 2.4ghz
4gb ram
Prior generations but dosnt have the new keyboard.

shamu3 wrote:
Im so stuiped thank you very much.
Not to see the wood for the trees...
Glad to be of help.
Have Fun
Stefan

Any fix yet for wifi and ethernet disconnect?

Running a 17" MacBook Pro with intel. NEVER had a problem with internet connection through wifi or ethernet. Upgraded from Snow Leopard to Lion and was dropping internet connection every 20 minutes or so. All other household devices worked fine including iPad, iPhone and other Mac laptop. Reinstalled Snow Leopard and problem is gone. Either give me a fix or return my $30.00. I am very disappointed. Faulty operating systems are the reason I left Microsoft 5 years ago. C'mon guys, APPLE is better then that!

I appreciate your quick response. I was hoping for an Apple update before taking the time to reinstall Lion, try a few things and if unsuccessful, reinstall Snow Leopard again. My laptop is pretty much useless to me without reliable Internet connection. Thank you for the tip, I'll try it when I have some down time.

Let applications choose between WiFi and Ethernet

Similar Messages

Maybe you are looking for