Lets make a list, Zen 2-4-8-16-32 sd ca

OK, it would seem that people out there are having a few problems with SD card compatibility, so lets help a little and post make/model of SD cards that work with the Zen 2/4/8/6/32gb models.
My cards are as follows, they both work fine in my Zen 6gb F/W version .20.02
Transcend 4gb SDHC class 6
Veho 8gb SDHC class 6
Hopefully if enough people post their cards up then a decent list can be had for all those a little confused with the Zen's compatibility with SD cards.Message Edited by bigred on 02-6-200808:06 PM

Worked with Zen 4GB (all firmware versions up to ZEN_PCFW_L22__20_02:
Kingston 2GB microSD with SD Adaptor
Kingston 4GB SDHC Class 6
Sandisk 4GB SDHC Extreme III

Similar Messages

  • Lets make a list.... problems with 2.0

    ok my update with flawless everything came up as planned and worked good... played with a couple apps for a few minute then it started running pretty unstable.. checked my email all settings were fine and transferred great in the backup.. then it started running slow as can be and just hanging up on everything.. i turned it off and back on and all was well again rearranged the menu and set it off to the side after that for about 20 minutes pick it up again and bam nothing... wont power on what so ever, doesnt respond to being plugged in, just completely bricked all there is to it.. now im going to have to figure out how to force a restore on it... any one have a link to the procedure???

    to force the iTouch into recovery mode is easy, Turn of iPod completely, Press
    & hold the HOME button while plugging in the cable into the iPod and you should
    see a screen appear on the iPod with the iTunes Logo and Pic of the Cable, Plug cable into USB on computer, load iTunes, Click on RESTORE.
    Hope this helps.
    PS. there is a apple support page with full instructions under iPhone support
    but can`t remember link Sorry

  • When I try and print off a list of my contacts, it defaults to an envelope. How do I make a list of just the names?

    When I try and print off a list of my contacts, it defaults to an envelope style, with all the info. I just want a list of names.  How do I do that?

    Thanks so much Martin.  It took me awhile to figure out that in the print mode, there is an arrow that expands the print dialog box.  I've been looking for the print dialog box for awhile, and now that I found it, I could make my list. Thank you SO much!! I can show my computer savvy husband that I learned something new today!!!  I'm SO happy!!!

  • Is there a way to make a list of songs that I plan on buying in the future?

    I constantly see songs that I want to buy on the iTunes store, but then end up forgetting them before I get money to buy them. Is there a way to make a list on the store so that when I come back in the future, I can just pick the songs off of that list?

    Sure, pen & paper will work, but if it's in a wishlist, you just click on the arrow and don't have to type things all over again.

  • I'd like to make a list of interactive Swing components....

    EDIT: I've been doing more research about Layout Managers and it appears that BoxLayout may provide me with the solution I need. I'll mess around with it for awhile and report back if I still need help. Thanks pals!+
    I would like to make a list of JPanels laid out in basically a column. One on top of the other. That's not so difficult, but I need to make it able able to add and remove panels in response to user-driven events (in other words, I can't just hard-code them all, and the panels are generated on the fly, so I don't even know how many I'll need to be displaying until I need to display them.
    Here's a simple mockup of the window I'm talking about.
    |      - o x |
    |____________|
    |            |
    |            |
    |   Panel1   |
    |   Panel2   |
    |   Panel3   |
    |   Panel4   |
    |____________|At first, I thought a JList would serve my purpose, but you can't add interactive Swing components to JLists (or JTables)... they'll render, but that's all. My panels will contain a button and a checkbox, so this is a no-go.
    I was also thinking I could just manage the placement with GridBagLayout and just keep indexes for the current y position, but if there's an easier way, I'd rather not go this route. It has me writing a lot of extra code and manipulating a lot of fields of GridBagConstraints, which opens me to less-understandable code and more error-prone code, on account of I'm great at making little mistakes when I'm setting craploads of constraints.
    Does anyone have any ideas? It'd be ideal if there was just some sort of container I could plop them in with add and remove methods (a la JTabbedPane or something).
    I'm pretty new to Swing, so maybe I'm missing something obvious.
    Edited by: Caryy on Sep 30, 2010 4:15 PM

    I would recommend using BoxLayout or Box.createVerticalBox(). As mKorbel already mentioned, you need to call revalidate() after adding any component to an already realized/visible container, and additionally call repaint() after removing a component. To resize the top level window to accommodate its new content, you would call pack(). Or, again as suggested by mKorbel, wrap your panel/Box in a JScrollPane.
    db

  • What is the best way to make a list of addresses for envelopes or labels?  Address book, numbers or pages?

    What is the best way to make a list of addresses for envelopes and labels?  Address book, Pages or Numbers?

    I liek your idea of having multiple images in a grid. I think
    that would be the best bet as you mentioned. Having one big picture
    would be hard to distinguish the sub-areas with mouse coordinates.
    I think checking the coordinates for the mouse would be very
    tedious because I would have to check for the left boundary, the
    right, top, and bottom for each sub-area!
    What do you mean by using button components and reskinning.
    Is this simply using buttons and changing the way they look? I'm
    just trying to save time and memory, because if I had a 10 by 10
    grid, thats a hundred buttons. Wouldn't that slow down the machine
    alot? And for that matter wouldn't having a grid of 10 by 10 images
    also by the same deal?
    Thanks for the input, I'm just trying to find the most
    efficient way to do it.

  • How do i make a list in ID

    I want to make a list in a document, so that for each new paragraf ther comes a new number
    1. Bla bla bla
    2. More bla bla bla
    3. even more bla bla bla
    Hwat is the smartes (easy) way to do this ???

    Thanks steve and robert
    Ill look into that ...
    I have learnd GoLive and partualy Photoshop by trying (and help frome adobe forum), But maybe its time to turn to books to.. (Getting old)
    >if you only have CS2 you might want to look around for that version.
    Well i got CS2 at home, at work we have CS and they have ask mee if i can use it and i know they are planing to upgrad all adobe packs. So maybe they will pay for a book (ore 2). Normaly im the PS gay at work :)
    >Number lists and bullets are different in the two versions.
    How difrent ? .. the basic ideer i gues are the same? but mayby how its done/set up difrently ??

  • How to make Mutt list messages in a descending order

    Hey.
    How do I make mutt list my messages with the newest message at the top, like in the web interface of Gmail? It is called descending listing starting with the newest message, I suppose.

    .:B:. wrote:
    I have recently switched to Mutt myself, and the manual is unfortunately not a good thing to start. I have pieced together a nice config mainly by googling and stealing stuff from other people's configuration files.
    The setting you want is
    set sort = reverse-date-received
    That will show the most recent mails on top.
    If you want it threaded according to the most recent e-mail in a thread, this should work:
    set sort=threads
    set sort_browser=reverse-date
    set sort_aux=last-date-received
    Alternatively you might use
    sort_aux=reverse-last-date-received
    Hey, thanks. The first one did not work for me, but the second (alternate) did, so this would be the correct config:
    set sort=threads
    set sort_browser=date
    set sort_aux=reverse-last-date-received

  • How can I make the list of all bookmarks as my startpage?

    How can I make the list of all bookmarks as my startpage?

    i am also like what you asked because the bookmark i like chrome bookmarks arragement but not good on firefox and the current bookmarks makes hard to know where and what i am look i said the bookmarks not shows well and its hard
    I like bookmark must have a small image whenever saving the page and it have a small details about the page that helps to find easily

  • How can i make a list like Razer Game Booster in wpf C#

    Hello every one
    I asked this question in stackoverflow, and they just gave me negative points! I don't know why,
    but at least
    I expected to get answer in here.
    I trying to make a software with WPF in C# that the theme is
    similar to Razer Game Booster.
    I made many effect similar to
    Razer Game Booster in my software but I don't Know how can i make a list like that software!
    You can download Razer Game Booster in this link: http://www.razerzone.com/cortex/download
    Now, What exactly i want?! I'll show you with following pics:
    After adding a few items, a scroll bar will appear and if you do nothing, it will be hidden after a few seconds:
    Image link: http://imgur.com/XIl3Bk9
    After placing the mouse on the items (on hover status):
    Image link: http://imgur.com/8NbUrIx
    Which one of objects in visual C# and WPF Application can do this?!
    if you interested to see what I've done, unfortunately I tried it and
    failed! Now I asking you to help me and show me how can i do that?
    any advice can help me. I'm waiting for your answer.
    thank you guys so much.
    I'm sorry
    if I bothering you.

    There are probably 1000's of tutorial about layout in WPF but I have found that the people on this forum have the best handle on how to use WPF.  I am now near a workstation and have the following code example which should get you started. (the example
    is in VB but it is the XAML which is important).
    <Window x:Class="MainWindow"
    xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
    xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
    Title="MainWindow" Height="350" Width="525" Loaded="Window_Loaded">
    <Window.Resources>
    <Style TargetType="ListBox" x:Key="myListbox" >
    <Setter Property="ScrollViewer.HorizontalScrollBarVisibility" Value="Hidden"></Setter>
    <Style.Triggers>
    <Trigger Property="IsMouseOver" Value="True">
    <Setter Property="ScrollViewer.HorizontalScrollBarVisibility" Value="Visible" ></Setter>
    </Trigger>
    </Style.Triggers>
    </Style>
    </Window.Resources>
    <Grid Background="#FF040404">
    <ListBox Style="{StaticResource myListbox }"
    HorizontalAlignment="Left" Height="237" Margin="23,46,0,0"
    VerticalAlignment="Top" Width="470"
    ItemsSource="{Binding theList}" Background="Transparent" >
    <ListBox.ItemsPanel>
    <ItemsPanelTemplate>
    <UniformGrid Rows="2"></UniformGrid>
    </ItemsPanelTemplate>
    </ListBox.ItemsPanel>
    <ListBox.ItemTemplate>
    <DataTemplate>
    <Grid Background="#FF574A4A" Width="150" Height="75" Margin="0,0,10,0" >
    <TextBlock Text="{Binding theCaption}" VerticalAlignment="Bottom" Foreground="#FFF5EFEF"></TextBlock>
    </Grid>
    </DataTemplate>
    </ListBox.ItemTemplate>
    </ListBox>
    </Grid>
    </Window>
    Class MainWindow
    Public Property theList As New List(Of theItem)
    Private Sub Window_Loaded(sender As Object, e As RoutedEventArgs)
    For i As Integer = 0 To 5
    Dim ti As New theItem With {.theCaption = "Caption " + i.ToString}
    theList.Add(ti)
    Next
    DataContext = Me
    End Sub
    End Class
    Public Class theItem
    Public Property theCaption As String
    End Class
    The above XAML define a listbox with the properties I mentioned in my previous post.  There is a listbox with an ItemTemplate (define how each item should be displayed) and a definition of how the layout
    should be done (ItemsPanel).  The is also a style which uses datatriggers to show/hide your scrollbar.  If you have questions about what I presented please ask but I would ask that you try it first so that you can see how it looks .
    And I'm sorry for the small font above but this forum editor constantly give me problems.
    Lloyd Sheen

  • How can i make a list in LibreOffice of my font book fonts?

    How can i make a list in LibreOffice of my font book fonts?

    Give LemkeSoft's FontBook a try. It will work in demo mode so you can try it out. $10 to purchase the full version.

  • How to make a list item field with DATE data type?

    I have a column with DATE data type. Using forms 6i I want to generate a poplist list item field with this column while the value of the elements in the list to will be day names like SATURDAY,SUNDAY,MONDAY. if we change the data type from date to char, it will work properly but now with DATE data type behind it, it gives the following error message
    "FRM-32082: Invalid value for given item type.
    List WEEKREST
    Item: WEEKREST
    Block: EMPRESTS
    Form: MODULE3
    FRM-30085: Unable to adjust form for output."
    Using forms 6i how to make a list item field with DATE data type which can hold day names?

    Set your date column as a hidden (non-displayed) field. Create your list item with the varchar2 day names. Create the list item as a non-base-table field that accepts the text values of day names. On that field, create a when-validate-item trigger that translates the text into a real date, which it then uses to set the value of the actual base-table item.

  • How can I make one list of all events I have in over 30 libraries I made

    How can I make one list of all events I have in over 30 libraries I made?

    The only way I know of is to take a screenshot of the Photo mode with the View ➙ Show Event Titles selected.  That will give you a list of sorts.  Might take more than one screenshot per library.
                   Click to view full sized
    OT

  • How do i make a list of my Bookmarks and save it as a document?

    I have bookmarked many important websites in my Firefox browser. I want to make a list of the links that i bookmarked so that if any case i browse net in any other computer, i can go to those sites.
    Also I want to save the links in a ms word/any else type of document as a backup also. How would i do it?

    I do that myself. Very convenient.
    Press the '''<Alt>''' or '''<F10>''' key to bring up the tool bar.
    Select '''Bookmarks.''' ( Hot key is '''<Shift>+<Control> (Mac: <Command>) B.'''
    At the top of the window is a button '''Import / Backup.''' Press it.
    Then select '''Export Bookmarks to HTML,''' and follow the prompts.

  • How to make an list row Read only

    Hi All,
        Can anyone please tel me how to make the List row (list item) read only where the status column value is Submit.(i.e the whole row has to be made as readonly, am using event handler to try this out)
    Thanks in advance 

    Hi,
    According to your description, my understanding is that you want to set the list item read only based on the status column.
    If you want to do it using Event Receiver, you need to check the status column value using Server Object Model, then break role  Inheritance and rest role assignments to set the item read only.
    Here are some detailed code demo for your reference:
    Change SharePoint list item permissions to Read only programmatically
    How to: Create an Event Receiver
    Thanks
    Best Regards
    TechNet Community Support
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
    [email protected]

Maybe you are looking for