Letter of volatility for PXI-2568
Hi,
I woud like to find a letter of volatility for PXI-2568; it is a relay module with, what it appears to me, some logic circuitry on the output. I have searched both the forums and NI's main website without any luck. Can someone here provide the documentation needed? I would very much appreciate it.
Hello RFdigit,
You have not been able to locate it online because National Instruments reserves control over this document. With your permission, post an update on the forum so I can send you an email containing this information.
Best regards,
Ali M
Applications Engineer
National Instruments
Similar Messages
-
Letter of Volatility for PXI-8108?
Is there a Letter of Volatility Available for the PXI-8108 describing volatile and non-volatile memory
To anyone interested in getting a Letter of Volatility (LOV):
We have started posting LOVs on some product pages of our website in the resources section, so it is worth checking there before contacting us. In many cases, as it was in this one, we have not made the LOV publicly accessible at this time.
In that case, the most efficient way to get LOVs is to contact our support engineers by calling 866-ASK-MYNI (275-6964). They will be able to talk to you about your need for the document and speak with our internal resources to get that to you fairly quickly.
Regards,
Ben R.
Modular Instruments Product Marketing Engineer
National Instruments -
Letter of volatility for PXIe-1071
I'm looking for a Letter (certificate) of Volatility for the following, please:
PXIe-1071
PXIe-8135
PXIe-8234Hey,
This is the type of request that would be better suited for an official service request via our support system. Since there was a nearly identical request submitted recently, I am going to assume that it pertains to the same incident and handle it via that channel.
Matt W.
Applications Engineer
National Instruments -
Hello,
I am in need of Letters of Volatility for the following PXI components.
- PXI-8431/8
- PXI-2503
- PXI-4065
Thanks in advanceHello RFdigit,
You have not been able to locate it online because National Instruments reserves control over this document. With your permission, post an update on the forum so I can send you an email containing this information.
Best regards,
Ali M
Applications Engineer
National Instruments -
I need a letter of volatility for the PXI-1042 chasis.
I need the standard security information needed to confirm that sensitive data passing through National Instruments PXI-1042 chassis has been replaced been fully cleared.
Hello ECohen and anyone who might need this in the future,
Here is the letter of volitility for you. Cheers!
ColeR
Field Engineer
Attachments:
PXI-1042(Q) Letter of Volatility.pdf 13 KB -
Please provide me with a Letter of Volatility for the Motion Control Boards PCI-7344 and PCI-7354. I would also appreciate one for the Video Capture Board PCI-1409. A declassification procedure for each of these boards would also meet my requirements. Thanks.
I don't believe there is a price for the letter, but I could be wrong. The best way to proceed with this, if you call us at 1-866-ASK-MYNI (1-866-275-6964) and create a service request, or I can pull your information and send you this information myself if you give me permission to access your information for that purpose.
National Instruments
Applications Engineer -
I'm trying to locate a Letter of Volatility for the VXI-1000 Mainframe, but haven't had any luck searching the web site. I tried to submit a support request but don't have a membership number to do so. Any help would be greatly appreciated. Thanks.
Hello mdbeer,
The VXI-1000 main frame was End of Life (EOL) in approximately 1997 and thus the documentation such as the Letter of Volatility is unavailable. I apologize for the inconvenience.
Regards,
-Travis E
National Instruments
Applications Engineer -
Letter of Volatility - VXI-PCI8026
Hello,
I work in a secured area and we recently purchased 2ea of the VXI-PCI8026. Can someone direct me to a Letter of Volatility for the EEPROM on the VXI-MXI-2 and PCI-MXI-2 module/board? Also, what exactly is the size of the EEPROM, I couldn't find this mentioned anywhere in the manual.
Thanks,
- Darin
Solved!
Go to Solution.Darin,
Thank you for using the Forums. I believe the document that you are looking for can be found here.
I hope that helps.
Brian P.
Applications Engineer
National Instruments -
Searching for a cable terminal block combinatio​n that works with the PXI-2568
Hi,
Has anyone figured out a cable-terminal block combination for the PXI-2568. I have a hard time finding something useful and would appreciate any part/supplier information from users who purchased a PXI-2568. Thanks.If you download the specifications document for the PXI-2568 from NI's website there is a section close to the end that talks about cabling and accessories. The PXI-2568 uses a standard 62 pin D-sub connector. The cable and terminal blocks for this connector can be found at large electronic suppliers. I hope this helps and have a great day!
Bryan Snarr
Application Engineer
National Instruments
Bryan Snarr
Field Engineer
Northern California
National Instruments -
Driver Setup for PXI 2569 and PXI 2529 in Switch executive
Hi,
What sould be tha "Driver Setup" for PXI 2569 and PXI 2529 in Switch executive under 'Driver Session"
Regards!!!
Vineet ShuklaHi Vineet,
You do not need to insert anything under Driver Setup. Anytime you are using NI switches, you can simply click Configure NI Switches when creating a NI Switch Executive Virtual Device to configure the topology settings of those switches.
Just so you know, you can insert information under Driver Setup, and then you wouldn't have to use the Configure NI Switches wizard. More detail on what to insert under Driver Setup can be found in the following KnowledgeBase:
How Do I Create a Virtual Switch and Use it in my Application?
http://digital.ni.com/public.nsf/websearch/A1F0D6A3357E14B386256E4B0071FDA2?OpenDocument
In short, you would type "Topology:" followed by the topology name such as "2569/100-SPST" or "2529/2-Wire 4x32 Matrix".
Let me know if you have further questions or if this does not resolve your issue!
Chad Erickson
Switch Product Support Engineer
NI - USA -
Letter of Credit for Vendor Payments
Hi All,
We are implementing ECC 6.0 Version.
The client requirement is to create Letter of Credit for Vendors and to capture data relating issue of Letter of Credit, Terms of Payment and Expirition Date. Against a Single Letter of Credit issued to a vendor client may receive more than one Invoice till the Expiry period of the Letter of Credit and Value. Further, client may also amend the Old Letter of Credit by extending the validity period or the value of the LC.
I know that we can create letter of credit through Special GL indicator 'L'. But it is one Letter of Credit to One invoice for clearing. How to map one letter of credit to multiple invoices and how we can capture expirition date of LC.
Further same vendor can have multiple LC opened against them for different projects. Please let me know detailed configuration steps.
Best Regards,
Bhargav.
Edited by: Bhargava Ram on Oct 3, 2008 3:40 PMHi,
Sorry i guess my question is not clear. It is not to link any LC with PO
The client will raise a single LC against any import vendor. Since these are large CAPEX related purchases, the vendor will send multiple invoices. The bank will adjust the LC against the invoices. Post adjustment the bank will send th advice to the company.
My question was how we can adjust multiple invoices against a single LC
THanks
Sembian -
Video Output for PXI Embedded Real-Time Controller ?
I plan to purchase a PXI Embedded Real-Time Controller for security monitoring.
Is it possible to use the video output of a PXI Controller running RTOS to display messages from a LabVIEW RT application ? According to the documentation, it seems that the use of the video output is only possible for PXI Controllers running Windows XP.
Does it exist a specific application to do this with LabVIEW RT ?
Thanx.
H.L.
Solved!
Go to Solution.Hi Yann,
The situation seems a bit confusing as in the link you've given above using the local monitor from a pxi labview rt system as the HMI without a pc attached, two messages (here and here) say that it is possible to display an image on the video output of a PXI RT controller using a function of the NI-IMAQ librarey (namely, the IMAQ RT Video Out VI) !
I have the NI-IMAQ library but no PXI controller to test if this solution should work or not
Does anyone have the answer ?
Thanx,
H.L. -
Hi All,
How to map letter of credit for import purchase orders in MM module. The foreign Trade part of SD module only talks of export.
Prashant TawdeHi Phani
Thank for your help
Please tell me step by step from creating a letter of credit to paying
I have a business below:
1. The Clearing agent ask for amount, the person who receive the product will give Letter of Authority to Clearing Agent. The clearing agent move to bank and take check.
For this purpose, we just issue LA.
2. Prepare Purchase for the Vendor from whom we are going to receive the product. There may be 2 or more Vendors.
1. Product cost to be transferred to Vendor A
2. Freight or Other Charges to Vendor B
3. Customs Duty and Others to Vendor C
3. First We have to pay Customs Duty to Commissioner of Customs after LA issued.
Entry : Customs Clearing a/c Dr
Cess on Custom a/c Dr
CVD Clearing a/c Dr
Cess on CVD a/c Dr
Special CVD a/c Dr
Vendor C a/c Cr.
4. Cenvat credit for the product will be taken by person who handling Excise in that company
Entry : Cenvat Clearing a/c Cr.
RG23A Part II a/c Dr.
5. Clearing of Cenvat Credit
Entry : Cenvat Clearing a/c Dr.
CVD clearing a/c Cr.
Cess on CVD a/c Cr.
Special CVD a/c Cr.
6. After Bank payment they will transfter to us
Entry : Vendor a/c - Dr.
Bank a/c - Cr.
Please tell me how to configure and post accounting entries
Step by step
Thank you very much
Minh -
How to config letter of credit for an import
hi gurus,
can somebody explain me how letter of credit is configured for an import. it would be highly appreciated if i get a step by step procedure.
best regards
sayeedHi,
Refer to this weblink
http://www.sap-img.com/financial/process-of-letter-of-credit-for-imports.htm
or
refer to this sdn thread
letter of credit
Please let me know if you need more information.
Regards
Sridhar M -
Process Of Letter of Credit for Imports
Dear all,
Any one tell me process Of Letter of Credit for Imports ?
which transaction code can I use to post accounting entries ? which step to configure ?
step by step
Thank in advance
Minhtb
Edited by: Tran Binh Minh on May 8, 2008 5:44 AMHi Phani
Thank for your help
Please tell me step by step from creating a letter of credit to paying
I have a business below:
1. The Clearing agent ask for amount, the person who receive the product will give Letter of Authority to Clearing Agent. The clearing agent move to bank and take check.
For this purpose, we just issue LA.
2. Prepare Purchase for the Vendor from whom we are going to receive the product. There may be 2 or more Vendors.
1. Product cost to be transferred to Vendor A
2. Freight or Other Charges to Vendor B
3. Customs Duty and Others to Vendor C
3. First We have to pay Customs Duty to Commissioner of Customs after LA issued.
Entry : Customs Clearing a/c Dr
Cess on Custom a/c Dr
CVD Clearing a/c Dr
Cess on CVD a/c Dr
Special CVD a/c Dr
Vendor C a/c Cr.
4. Cenvat credit for the product will be taken by person who handling Excise in that company
Entry : Cenvat Clearing a/c Cr.
RG23A Part II a/c Dr.
5. Clearing of Cenvat Credit
Entry : Cenvat Clearing a/c Dr.
CVD clearing a/c Cr.
Cess on CVD a/c Cr.
Special CVD a/c Cr.
6. After Bank payment they will transfter to us
Entry : Vendor a/c - Dr.
Bank a/c - Cr.
Please tell me how to configure and post accounting entries
Step by step
Thank you very much
Minh
Maybe you are looking for
-
Pages 08 won't open my old pages file
I just upgraded to Pages 08 and when I try to open the file I was working on yesterday, with the previous version of pages, it says "The document...couldn't be opened". How can I open the old pages file with the new version?
-
FaceTime with Sister and her voice shorted it out from sounding funny to sounding normal?
It was sudden and I had not done anything and neither had she. Any idea about what it could be?
-
How do I enter rests in step time???
How do I enter rests in step time???
-
HT1510 I can't get my new shuffle to take a charge
I can't get my new shuffle to take a charge
-
Warum schaltet das iPad Air nicht in die Sleep/Wake Funktion?
Hallo ihr, mein iPad Air hat heute seine neue Hülle bekommen, eine Logitech Ultrathin keyboard Folio! Nun will ich, dass das iPad auch ausgeht, wenn ich es zuklappe, nur es geht auch mit anderer Hülle nicht! Die Logitech Hülle hat natürlich eine Slee