Level 2 status
I believe that I have been promoted to level two, if not promoted then you know what I mean.
I believe one or two perks are available when one reaches the second level.
I reached 150 points about a week ago and haven't seen anything yet.
Is it a matter of a little patience on my part or is a week a little too long?
You're Welcome Anthony!
I know how frustrating it is, when something that you have earned, with hard work and dedication, seems to elude you.
But hang in there, as rewards are gratifying, when eventually realized!
And Thank You, for extending the courtesy, of awarding in Discussions, as this is not a requirement, nor mandatory, but is much appreciated!
ali b
Similar Messages
-
recently recieved an email welcoming me to level 2 and it begins with:
Please include the line below in follow-up emails for this request.
Follow-up: 11111111 (random numbers in place of actual ones in the email)
I dont understand what this is..some type of id? Thanks!shldr2thewheel wrote:
Follow-up: 11111111 (random numbers in place of actual ones in the email)
I dont understand what this is..some type of id? Thanks!
It's only for answering the email in case you have any questions or remarks about your status and so on.
On that you should include that "follow up number" in the subject line of the eMail to identify the "follow up" mail and group all mails relating to you.
It's like a ticket number on support mails.
Lupunus -
OS-level Database Status/Connectivty Check (*nix)
Hi all
What is the most comprehensive singular* check to monitor "running" and "connectivity" status of an ORACLE database on a Unix-like platform?
Does checking the status of SMON ps -ef | grep smon confirm both statements:
1) Database is running; and,
2) Can be locally connected using sqlplus
Or, does this require separate OS-level checks? If so, which ones?
Cheers.Does checking the status of SMON ps -ef | grep smon confirm both statements:
1) Database is running; and,
2) Can be locally connected using sqlplusIf smon is running, my minimum assumption will be.....database is started in nomount state.
SQL> conn santu/santu
Connected.
SQL> conn /as sysdba
Connected.
SQL> shu immediate
Database closed.
Database dismounted.
ORACLE instance shut down.
SQL> startup nomount
ORACLE instance started.
Total System Global Area 1073741824 bytes
Fixed Size 2034376 bytes
Variable Size 264246584 bytes
Database Buffers 801112064 bytes
Redo Buffers 6348800 bytes
SQL> !ps -ef|grep smon
ora10g 23625 23587 0 09:31:06 pts/1 0:00 /bin/sh -c ps -ef|grep smon
ora10g 23626 23625 0 09:31:06 pts/1 0:00 grep smon
*ora10g 23615 1 0 09:30:46 ? 0:00 ora_smon_rtest*
SQL> conn santu/santu
ERROR:
ORA-01033: ORACLE initialization or shutdown in progress
Warning: You are no longer connected to ORACLE.Regards,
S.K. -
Oppurtunity status at item level
Hi Experts,
Could you please help know the oppurtunity status at item level (Distribution Status and Overall Status).
When checked, it is referring to data element CRMT_DISTRIBUTED and CRMT_OVERALL_STATUS.
Both have fixed values at domain level.
Could you please help me finding, in which table this data is stored at item level.
Regards,
SantoshHello Santosh,
For system status, CRM_JEST-STAT = I****, you can find the the defination with t-cd BS23.
For user status, CRM_JEST-STAT = E****, please check table TJ30.
Best regards,
Maggie -
URGENT: Changing status at Header level in Service Ticket in Webclient
Hi All
Please reply ASAP.......
I am changing status for service ticket in webclient at Header level.
But at item level system status is not changing.
Is there any config in CRM where user status or system status is copied from header to item level
Basically need is to trigger item status when header status is trigerred....
Can anyone help me in resolving this issue.
Regards
Pankaj VisputeThanks Bhanu,
I solved my problem with your answer.
Thanks,
Praveen -
Run Extended Analtytics / Create Star Schema based on Process Management Level Status
Dear HFM Gurus,
I have come across a requirement where I would need to automate extended analytics extraction based on Review Level / Approve Status of Entities. Once the Process Management Status changed to Approve status from Review Level 3 or they are in Review Level 3, corresponding 3-4 extracts will run for various levels of data (can be base level, parent level, adjustments etc. for various Scenarios). Also another requirement is that whatever process is built, it should run every hour to check the Process Management Status and extract accordingly, it should not extract if already extracted in the last run (that is if the extraction was already run in the last hour for RL3, and the Entity is still in RL3 in the next hour, it should not run the extract, if the RL3 is changed to Approved state, then the extract should be run. I know this is a lot of ask, request your guidance as to how to proceed with the same. Any help would be highly appreciated.
Warm Regards,
Sidd.Hi Thanos,
I was able to accomplish this using excel and HFM API's. What I did was to dynamically create a process management grid in excel, dynamically refresh the data, check this data against the previous review level status which gets dynamically copied from the old refresh, generate the list of entities which are in RL3 / Approved (changed Status) and then based on that generate the extracts using HFM API's. I was able to generate this in both 11.1.2.3 and 11.1.2.1 using the corresponding API libraries which the version supports.
Thanks and Regards,
Sidd. -
ORA-36695: The length of GID dimension status is 2. The length of LEVEL dim
I am using AWM 11.2.2.0.A.
I am compiling one of the dimension I created. The following error message i got:
An error has occurred on the server
Error class: Express Failure
Server error descriptions:
INI: error creating a definition manager, Generic at TxsOqConnection::generic<BuildProcess>
INI: XOQ-00703: error executing OLAP DML command "(GROUPINGID OLAP_WH.OLAP_WH!BITEM_PARENTREL INTO OLAP_WH.OLAP_WH!BITEM_GID USING OLAP_WH.OLAP_WH!BITEM_LEVELREL GID : ORA-36695: The length of GID dimension status is 2. The length of LEVEL dimension status is 3.
)", Generic at TxsOqAWManager::executeCommand
at oracle.olapi.data.source.DataProvider.callGeneric(Unknown Source)
at oracle.olapi.data.source.DataProvider.callGeneric(Unknown Source)
at oracle.olapi.data.source.DataProvider.executeBuild(Unknown Source)
at oracle.olap.awm.wizard.awbuild.UBuildWizardHelper$2.construct(Unknown Source)
at oracle.olap.awm.ui.SwingWorker$2.run(Unknown Source)
at java.lang.Thread.run(Unknown Source)Which version of the server are you using? Is that 11.2.0.2 as well?
This error could be due to a number of things. If you have made a number of edits to the dimension (e.g adding and removing levels and hierarchies), then the metadata in the AW may be a little confused. This was especially true for 11.1.0.7, but there could still be bugs lurking in 11.2. One thing you could try is to save the dimension to an XML template, then delete it from the AW and recreate it from the XML. This should flush out any AW metadata issues. -
How do you actually achieve status level? I have seen users with 1 post that have a Level 2 Status Level or something crazy like that.
What exactly does the Status Level symbolize?why do some post show the helpful answers and other don't (some show stars and helpful notations and others don't).
If the post wasn't designated as a question you won't see any such notations. (When you post a new topic, there is a checkbox saying "Mark this topic as a question - this encourages people to answer for points and helps you track answers.")
If the original poster awarded stars to posts, you will see stars next to those posts. If the original poster did not award any stars, you will not see any.
If you posted the original question, you will see the buttons next to each post that allow you to award "helpful" and "solved" designations for any of the responses.
as for the fix, since you ask, how about no points at all since the goal is other users helping other users and not to garner points.
This has been discussed here hundreds of times over the years. There are reasons for having points and levels, but there are those who think they don't matter and others who think they're worthwhile. It's an ongoing debate. The idea, for what it's worth, is that a level system helps new users determine which people helping them are likely to be reliable. The points system is the way users reach higher levels.
The reason that no one but the original poster can award points has to do with forum abuse. When anyone can award points to any post, we have had problems with people purposefully raising the status of their friends by giving any and all of their posts "helpful" designations, regardless of post content. Under the current system, only the person who asks the question can award points to the answers and the number of points they can award are limited, all to try to make the system actually work as intended. (Whether it does work is another matter for debate, also discussed here ad nauseum over the years.)
Message was edited by: Rachel R
Message was edited by: Rachel R -
Incorrect Delivery Header Packing Status
Dear Experts,
We did not expect the delivery header level Packing Status to change to "C" until all item were "C". However, the header level field changes to "C" when the first item on the delivery is packed.
Delivery Header Packing Status VBUK- KOSTK = C when the first item of the delivery is packed while there are many itmes to be still packed
Any valuable input on this will be appreciated.
Regards,
ShashidharHi Shashidar,
Please check the customizing for item cat. ZELN for example
> Logistics Execution
> Shipping
> Packing
> Packing Control By Item Category
> Item cat.ZELN : ' ' Can be packed <<<<<
A Must be packed
B Cannot be packed
Please change to 'A' (Must be packed) and try again.
regards,
Ramana -
Delivery header billing status is different from any of items.
Dear Friends ,
I have a peculiar case . There is a delivery document which is usually not relevant for billing . Each of the items in the delivery is showing billing status as 'blank' which means not releavant for billing . The item category also not relevant for billing . But at the header level , billing status is showing as 'A' , not yet processed .
could somebody explain what could be causing this ?
Thanks and Regards
Raghav.Hi Raghav
This could be because in your delivery document , some line items may not be relevant for billing and some line items might be relevant for billing and that is the reason at header level , it is showing that billing status is not yet processed (A)
So check the item category for each line item (relevant for billing or not)
Regards
Srinath -
Auto Approval EBP Purchase Order is not updating the status at the header
Hi There ,
We are facing an issue in EBP auto approval PO ,
The process level schema is set to Auto Approval (Standard 9CBUS2201_EX01_55)
During the PO creation , the standard schema is triggered and it gets approved .
The status of the PO in the Approval Tab is showing as Approved .
But in the docuemnt level the status is still Awaiting Approval .
While checking in SWI1 we came to know that an error has happened in the Task TS40007972
and the Guid ID of SRM Purchase is initial that has made the status(EV_STATUS) as initial .
The ERROR is from the below class & method.
Class: /SAPSRM/CL_WF_PROCESS_MGR_SBWF
Method:GET_PROCESS_DECISION_STATUS
Can anyone suggest to overcome this issue .It will be very usefull if anyone could suggest debugging possibility if any .
Regards,
Arun.Have you tried notes?
1625513 - Workflow without approval is Awaiting approval status
1724251 - Workflow log error: CREATE_DECISION_SETS cannot be executed -
Error in 2LIS_02_SCL(pur.Data(DocumentScheduleLine Level)
hi
I am loading data for MM for 2LIS_02_SCL(pur.Data(DocumentScheduleLine Level) in status the error message is
"Entry MMC1 does not exist in T001W (check entry)".
When in Long text i found the Matter:
"Input value must be defined in table T001W the value or values MMC1 are not Specified in this table "
Procedure
"check wheathher the input is correct and correct if necessary"
The thing is that i dont know how to rectify this procedure
pls reply soon .
Thanks
Regards
GurkiranAsk you Basis team about this error, it seems like something is missing from that table itself.
Basis team will help you out.
Hope this helps.
Regards
Dennis
§§ Assign some Points if found Helpful §§ -
I1112 status of Shopping cart- Need to create a follow on document
Hello Experts,
I have one issue in which enduser had created a shopping cart and header status is approved but no follow on document is generated. at line item level the status is Error in Process.
When i ran the report BBP_ALERT_SB_NOTTRANSFERED. then my Shopping cart status changed from I1111(item in transfer) to I1112"error in transmission'..
In Applicaiton monitor : the message is Not transferred to backend and Shopping cart 3100001911: Follow-on document(s) not transferred. we are using Extended Classic Scenario and i dont know why we are getting this issue, we are getting this same issue only for 2 Shopping carts.
Please guide me how i can repost the document so that follow on document will get generated.
I am in ECS scenario with SRM 7.0
Help will be appriciated.
smritiHi,
If it is only the problem with only few carts, Check if any Short dumps are occuring in SRM as Well as in R/3.
We faced a simialr situation and observed that it was resulting in a short dump due to bad coding in one BADI.
regards,
MRao -
System status LKD REL for operation & phases in Process order
Hi Gurus,
We have a process order in which system status for operations & phases is LKD REL due to which user is not able to confirm the process order. The status of process order is REL PRC APNG APRS BASC BCRQ GMPS MACM RESA SETC. One of the user from planning has set the status to LKD due to some artwork changes. Now another user set the status to unlock. Locked status from order status was reset but at operation & phases level the status is still LKD REL & hence order confirmation is not allowed.
I try to again set the status to lock but i am getting message system status LKD is active (ACT 40547870 0010) which is similar to one which we get during order confirmation.Pls. suggest.
Regards
AmitHello Amit
If the status LKD is not set for the order header, this is possibly an inconsistency.
Please open an OSS incident to SAP for further analysis.
BR
Caetano -
Shopping Cart status " Item in transfer process"
Dear Friends,
A shopping was created and it went to approval as per the Workflow designed.
It got the approval from all the required levels. But in the SRM system when checked with the chopping cart number with tcode BBP_PD the status is showing as " AWAITING APPROVAL" . and when it is check in the SRM Portal at Monitor shopping card at header level the status is same as above but in item the status is showing as " Item in transfer process".
And in BBP_PD its displaying the created PR number. But when this PR is checked in SAP, then its displaying missage no PR exist.
Please guide me in resolving this.
Thanks in advance.
Vamshi SreerangamHi Vamshi,
Can you check error log in RZ20 for this shopping cart?
Regards,
Nikhil
Maybe you are looking for
-
Hi all, I use Bi publisher version (11.1.6 ) First Question : What is the best template type for making operational reports not statistical report ( RTF template or PDF template or others ) ? -- Second Question : when i try to make report template us
-
Needs help to process data from a form in php
Hello there, Under "About us", is the contact us page where I would like to collect data. But I could not get it processed. I used but am very new to php. Anyhow, what I want to process is to send all the data collected to my email address, and at th
-
Pl/sql name_in function - Sql function.
Hi, I try this in sql: Declare h_v_1 VARCHAR2(100) := 'test_1 '; h_v_2 VARCHAR2(100) := 'test_2 '; h_v_3 VARCHAR2(100) := 'test_3 '; h_v_test VARCHAR2(300) := null; BEGIN FOR i IN 1..3 LOOP h_v_test := h_v_test||name_in('h_v_'||i); END LOOP; END; Pro
-
I purchased a 3rd generation I Pad ios6.0.1. I have been unable to use facetime. I put in email and then apple password, hit next and it takes me back to the same screen. I also have not been about to use I think it is messaging. I have been onl
-
Hi, I am deleting a GOS attachment using following code. data: i_borident type borident, i_attsrv type ref to cl_gos_document_service. i_objectd-objtype = 'YATTA'. i_objectd-logsys = 'BO'. i_objectd-objkey = inumber. select * fro