Level 3 headings in TOC appear as books with level 2 pages underneath

I'm importing a Frame 9 document into RH8. I've mapped my styles in the Conversion Settings, and in FM I set up the TOC styles so that heading3 was indented more than and smaller font than Heading2. But when the TOC is generated in RH, I get something like this:
HEADING 1
   Heading 2a
   heading 3a
   heading 3b
   heading 3c
      Heading 2b
      Heading 2c
I've attached screen shots.

It's all controlled by the css that you're using upon import I think.
Peter - shouldn't this one be in the FrameMaker Integration forum?

Similar Messages

Setting up new book with single pages but facing preview and breaking up pages at print time

I have a new book to design. Last time on a similar project (with 100 pages) I had a massive cry at print time as the printer wanted single pages with bleeds. I had set up the book with facing pages. When I unchecked to non facing pages I lost all my formatting and margins... I spent hours fixing this up.... I do need to show double spreads to the client as we go along and I do want to work in a mode that shows both left and right next to each other (ie in a book format). What do you suggest? I have been looking at setting up as single pages side by side and then at print time I think I can move all my right hand pages over with the break up page function and then fix up all my bleeds manually.? thanks in advance

lisalip schrieb:
no my printer needs 5mm bleed all around for the books I am doing and wants single pages with crops and bleeds
I will check the link and hope ok
I do prefer to design with facing pages but as I said it was a nightmare for me last time when setting for print
You confuse single pages with non facing document.
Every page has to be its own page. When your document has facing pages you have to set up a document with facing pages. There is no way around. Otherwise you will have problems with the left and the right page number and a lot of other issues.
If the printer needs single pages you have to export your document as PDF with single pages. That means deactivate the spread option in the PDF export dialog.
Here I have an example:
Situation:
In the 2 spreads on the top you don't have a problem when you export to a single page PDF. The bleed is taking material from the opposite page. It is ok and not disturbing.
But the bottom spread is different. Here you see a design break. It would be disturbing, if you take material from the opposite page. In many cases you would not realize it, but there are several situation where it might be a problem like glue or o-wire bindings where the bleed might become visible.
So you have to go to the page panel.
You have to select the spread first, then you go to the fly-out menu and select don't "allow selected spread to shuffle" pages. The numbers of the spread will appear in rectangle brackets.
Now you can drag the right (or left) page away from their counterpart on the spread. First you have to deselect any pages from that spread, so you can click on any thumbnail of any other page of any other spread. Then click on the right page of that spread. Only this pages has to be selected.
You see the icon of your curser changes as it is in the image above. Drag it as far as you see a thick vertical line. Then release sthe curser.
As result you have now seperate pages. You need only to extend the image, here on page 6. I have taken an image which is large enough, so I need only to move the image frame edge to the bleed.
When I export a single page PDF, as your printer wants I don't get problematic bleed from the opposite page.
You can download this example as IDML file. https://www.dropbox.com/s/qnotrl1ihe7umh7/SinglePages-Spread%20Ordner.zip

Interactivity in Book with single page documents

I'm currently working with a book, with single page documents.
I'm trying to use the interactivity features for buttons in CS5.5
I was able to get pages 2-5 to link to the first page, which we have set up as the table of contents.
However, I'm having issues trying to link button from the 'Table of Contents' to the single pages of the book.
For example, I have a button that, once click will take you to page 2, and another button that will take you to page 3 once clicked.
Once I export to an Interactive PDF, the buttons on the 'Table of Contents' do not work.
However the buttons on pgs. 2-5, that go to the 'First Page' work.
Any suggestions/tips on how to get buttons to work on the first page, that will navigate you to the specified page?
Thanks!

Book settings always trump File settings, so make certain that in your book file Numbering and Pagination settings do not allow any "Read from File" settings.
What's the Numbering setting for Page in the book files for the chapters? Typically, you should have this set to "Continue Numbering from Previous Page in Book" for all but the first chapter, if you want continuous numbering.
Also make certain that if you want continuous pagination, that you don't have any chapters forced to start on a Right-hand page with the previous chapter also ending on a Right page. This will force FM to add an extra (Left) page and also bump up the page numbering.

How can I create one pdf from a FrameMaker Book with mixed page sizes.

Looking for an easier way to create one pdf from a FrameMaker book that has files with different pages sizes; letter and tabloid.
So far, I have not been able to find a way to set up the Adobe PDF printer or Distiller to read the page size from the source files in the book and then create one pdf with the appropriate page sizes based on the file sizes in the FrameMaker book. I can create a pdf of the book using a multi-step process where I create a pdf for each page size and then combine them into one file. This is a lot of work.
Is there a way to set the Adobe PDF printer where it reads page size from the source files and then creates one pdf with a mixed page sizes?
Using FrameMaker 7 and 10 and Acrobat X Pro.
Thanks for any suggestions

http://forums.adobe.com/message/4013068#4013068
http://forums.adobe.com/message/3519366#3519366
http://forums.adobe.com/thread/485331?tstart=0

Printing Photo Book with 101+ Pages

Sorry if this has been previously posted, but I could not find anything on this topic. Does anyone know of an online service that will print a photo book with more than 100 pages? I have a photo book I have created in PS6 to commemorate my parents trip to Europe for their 50th anniversary. All that time and effort and then I find out Kodak will only print up to 80 pages! I would really appreciate any suggestions on this!
Thanks

Thanks Trish. My book is actually 140 pages & viovio only goes to 120. At this point, guess I will look at deleting 20 pages (tough!) and using them. They seem to be the best option so far!

Iphoto photo books with extra pages

I am currently making a photo book. As I scroll through my book, there are no blank pages, but in the photo layout across the top of my screen it shows 2 blank pages. What will my final book look like? Will the extra pages across the top be visible in my photo book even though they aren't visible in the computer version?

I've not seen that in iPhoto '08 - iPhoto '09 does have a thumbnail bug like that that has not been fixed yet
Try clicking on the blank thumbnail and seeing what it shows in the main window
And remember the sure way to know what is going to print is to preview it according to this article - http://support.apple.com/kb/HT1040 - and save the resulting PDF for reference
LN

I have a PDF document with 10 pages that I need to make into a book?

I received a PDF file containing 10 pages of a newsletter that needs to be turned into a book using InDesign. Is there a method that I may use to take the pages from this PDF file and make a book with 10 pages in InDesign?

for a 'simple' book:
create a new indesign document with 10 pages--uncheck facing pages in the setup dialog--set the page size, margins, bleeds--then--go to file>place>locate the PDF--check the checkbox that says 'show import options' choose 'media' from dropdown menu -- choose (pages) ALL-- double click the file name (the PDF)--this will load all 10 pages to your cursor--go to page 1--click with cursor (this will place page 1) go to page 2 and click, page 3 click, etc etc--you can go back and re-position the pages later...
note: if the plan is to print and staple the book, you will need 12 pages--and also note--the placed art will not be editable.

I started with 100 pages in my photo book. Then reduced the number to 75 for finished project. When i click on "buy" it says I have some frames with no photos. But I've checked entire book

I started a book with 100 pages, but reduced it to 75 by deleting some pages. When i completed the book & tried to buy it a box pops up saying I have some frames that need photos. I've checked the book over & over & cannot find any pages like that. How can I order my completed book?

Look for pages that use photos for the background, even if you have other photos on the page. It'll look something like this in the layout pane:
It would look like this in the PDF version:
If you have a 1 photo per page, full page, you could have that option selected and not know it unless you looked at the layout pane like this example:
OT

Pages transition in a catalogue with 5 pages

Hi everyone,
I have just creating a digital book with 5 pages. My doubt is reference to apply a pages transition and convert file in swf. When I open it, it appear first new blank page before my presentation. What can I do for avoing this extra page! Thanks!
Rose

Check out another thread about this subject:
http://forums.adobe.com/thread/822633?tstart=0

Problem with automatic table of contents Level headings

I am having trouble with the Table of contents in Adobe Indesign. When I create my automatic table of contents one of the Level headings that is supposed to appear under Chapter 1 instead appears under the Introduction heading. On the actual page where the heading paragraph styles have been defined the 2nd Level heading is as it should be underneath Chapter 1. So what I end up having to do is move them manually in the TOC. But I don’t want to have to do this and it would be great if Indesign instead did the automatic table of contents correctly.
I wonder if it has anything to with the fact that our template is set up with headings (that sit outside the body text to the left) as text boxes which we place inside the main body text box (they have anchored object settings on them so the heading sits off to the side). Whilst the anchored text box is exactly in the right sequence, maybe indesign senses and reads the anchored text box last?
I have an example of the file and the problem that is occurring in the pdf, it can be downloaded from:
Is there a solution to this? If anyone has any ideas I would be very grateful.

I've been playing with this for a while, and quite honestly I don't understand why it's doing things the way it is. It's working correctly on Page 11, which seems to me to have exactly the same structure, except for the subtitle. It also works correctly if I copy the frames from page 14 and paste into a new doc.
Things I tried that did not work: Export as .inx and move the pages to a new doc. You might try copying the text and pasting into a new doc.

RH11 TOC "book with link" icon

Hello! I have a question about customizing the TOC icons in RH11. I used the Responsive HTML5 Settings GUI to change all the TOC icons... EXCEPT the open book with link. This appears to be pulling a .png from the template resources folder, but there is no way to change it in the output settings within RH11 itself. Can I edit one of the Javascript files get it to pull a custom icon? Or am I stuck with the default icon? (In the image below, it's the third icon down.)
Thanks!

I have moved this post to the correct forum. Please take a look at the sticky topics.
Willam is our resident guru on these matters but pending his confirmation, I think the solution is to locate the image in the template folder and substitute it with what you want, using the same name and backing up the original in case.
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

Problem with TOC in long book doc

Hi!
I have a book with 16 chapters
every chapter has its own TOC, including a heading that has its unique paragraph style
Now, I want to create a TOC at the beginning of the book - using the heading of each chapter's TOC - so I tell it to use that unique Para style (that I used for each chapter)
for some reason after formatting the TOC and checking "use book docs" I get an empty TOC with the word "contents"
any ideas what I may be doing wrong?
maybe it can't pull from within other TOCs??
TIA!!!

It's good that you're looking into this before getting started.
Search Google for terms like "indexing books" without quotes.
HTH
Regards,
Peter
Peter Gold
KnowHow ProServices

Link in Webhelp to open sub-TOC tree of a 'Book with Link'

RH8 HTML
Hi all, hoping I can find a solution for this.
Currently, and as it should, I link to a page in my webhelp, from within my webhelp. i.e front page has a link that refers to another section in the webhelp. The links work fine, these links however are going to the 'book' (I created the TOC books to be books with links) and within these books are other topics.#
Is there a way to make it so that when the user clicks a link that goes to one of these 'books' in the TOC, that the toc tree also drops down.
example (hard to explain)
TOC
Home (contains link that user clicks which goes to Page 1)
Page 1 (book with link)
sub-page1 (remains closed until user opens it by clicking 'Page 1' book)
subpage 2 (remains closed until user opens it by clicking 'Page 1' book)
I would like those sub-pages to be opened when the link is clicked. Can it be done?
Thanks, hope its clear....

Hi all
For what it's worth, Leon's suggestion is what I too would recommend. When I facilitate a RoboHelp class and am discussing the "Book with link" feature, I typically will suggest that this approach is used.
@Leon - I think this changed with a recent forum upgrade. Annoying, isn't it?
Standard definiton of any upgrade: Uninstall old bugs. Install new ones.
Cheers... Rick
Helpful and Handy Links
RoboHelp Wish Form/Bug Reporting Form
Begin learning RoboHelp HTML 7 or 8 within the day - $24.95!
Adobe Certified RoboHelp HTML Training
SorcerStone Blog
RoboHelp eBooks

Before partition by Boot Camp on Mac Book Pro With Mac OS Lion the computer restarts but not open wizard of Windows 7 and appears the apple with question mark...

Before partition by Boot Camp on Mac Book Pro With Mac OS Lion the computer restarts but not open wizard of Windows 7 install and appears the apple with question mark...don't recognize disk..

Apparently Zoo Tycoon can't be played on anything newer than 10.7.
https://discussions.apple.com/message/21885910#21885910
Roller Coaster Tycoon is available for purchase from the App Store.

How to make spry menubar top level only appear for browsers with java turned off

I was under the impression that just the top level of the horizontal spry menubar appears when someone with Java turned off views it...now I see that the entire unordered list appears vertically and takes up the whole page....is there a way to make just the top level menubar items appear when java is turned off in viewers browser?
Thank you in advance for any insight you can provide.
Lois

When you disable Javascript in your browser...and it is Javascript not Java... if your menubar is properly constructed, the submenus do not appear, only the top level menu items.
It sounds to me as if you are turning off style rendering in Dreamweaver itself, or have not properly linked your CSS stylesheet to your page.
When CSS is linked properly, the submenus are "hidden" with left: -10000px; (a BIG distance) offscreen to the left of the Viewport. They stay there unless Javascript is turned on. It is Javascript that "calls them back" onto the Viewport.
Give me a link, Lois, and I'll check into your page for you...
Beth

Level 3 headings in TOC appear as books with level 2 pages underneath

Similar Messages

Maybe you are looking for