Level Customization in SOP and RTSOP Worksheets

Can anyone suggest me, how to view custom levels in different worksheets of SOP and RTSOP?
This is urgent,
Regards,
Viswanadh N

dear customer,
do you have a material code for each variant?
the sales requirements should be taken in VA01 , in the sales module.
In Flexible planning you can create your own planning structure of characteristics and key figures.
You can create your own infostructure with the 'sales' as key figure. You can set that the actual sales of your database is the value of the keyfigure . you can use as characteistic the variant material and the zonal wise.
Once you have in MC94 the values that you want ( you can correct the sales value with your own formulas) , you cna transfer them to the demand management in MC8G.
then after you have the pIRS in Demand Managment you can run the MRP and it will create the planned orders .
Dear colleague,if your question is solved set the thread as 'answered' and give points to the useful replies
thanks for your cooperation.
best regards

Similar Messages

Reg SOP and flexible planning

Dear all,
Please explain what is the difference between SOP and flexible planning, similarly in an industry when do use Longterm planning, when we will use SOP and when we use Flexible planning, when we should use MRP planning
Please advice
regards
venkat

Dear,
Standard SOP:-
Standard SOP, you work with one organizational unit, the product group hierarchy, and plan predefined key figures in a planning table with a set layout. All plans in Standard SOP are based on the standard information structure S076.
If there are more regions for an organization, planning can not be done at different region or different sales organization level using Standard SOP.
Flexible Planning:-
Flexible Planning, on the other hand, can be based on any information structure of your choice, either a self-defined information structure or a standard information structure.
If there are more regions for an organization, planning can be done at different region or different sales organization level using Flexible planning
Please refer my reply from this thread,
[SOP - Flexible Planning |SOP - Flexible Planning u2013 Demand Management.]
Regards,
R.Brahmankar

Synchronizing User-level Customization to Seed-level customization

Let's say I created a seeded customization layer called "site." And then I have a user called "X". Is it possible to programmatically synchronize(e.g. copy) X's user customizations into the "site" seed-level customization? Because from what I could glean from the customization xmls in the MAR files created in my integrated weblogic deployments, the customization metadata for user and seeded customization are nearly identical. It seems that the layer is identified by the folder structure(at least on file based MDS). So I would guess that it is possible to just dump one customization layer's data into another.
Basically, I'd like to find out if the current MDS API exposed by ADF has the necessary exposed methods required to accomplish this.

Hi,
the design time at runtime APIs for MDS in ADF are not yet available for public use (which also means that the APIs for this are not documented)
Frank

Deleting all user level customizations

In our WebCenter Portal 11g, PS5 with latest bundle patch, we have quite a few user-level customizations stored in MDS.
However, we have just changed our user base (different LDAP), so many of the users are no longer valid.
Does anyone know of a nifty way to delete all the existing user level customizations (and whatever else is stored in MDS on the user level)?

Hi Jaap.
I think that you will need to code some Java using MDS API to achieve your purpose.
I though in a solution based on next ideas:
1) Analyze metadata paths used by WebCenter in adf-config.xml (It indicates root path folders where apply customizations).
You have to take entries that are using oracle.webcenter.webcenterapp.internal.metadata.WebCenterUserCC customization class
2) Use MDS API to go every possible /cust/user folder of preconfigured paths of MDS and remove it. You can decompile previous class to check how and where is storing User customization class.
However the approach couldn't be good. Why?.
1) If you download and double check MDS paths (where user customizations are) always is using user name encrypted and then isn't easy generate MDS path to remove user customizations. Should investigate where and how is encrypting user when storing.
2) You have to know what users are obsolete because you have to generate the path based on that userID (encrypted).
It's only an idea in my mind. Don't know if exists better approach or something OOTB to delete User customization of obsolete users.
I hope this help you.
Regards.

Help on Setting logical Levels in Fact tables and on Dimension tables

Hi all
Can any body provide any blogs or any king of material on what exactly is levelling .
Like after creating the Dimensional hierarchies we need to set the logical levels for the LTS of fact tabels ri8 .So what is the difference between setting logical levels to fact tabels and also Setting levelling on Dimension tables .
Any kind of help is appreciated
Thanks
Xavier.
Edited by: Xavier on Aug 4, 2011 10:50 AM

I have read these blogs ,but what my question is
Setting the logical levels in LTS of Fact tables i understood .
But we can also set the logical levels for dimensions also ri8 .I didn't understand why do we set the logical levels for dimensions .Is there any reason why we go with the levelling at dimensions
Thanks
Xavier
Edited by: Xavier on Aug 4, 2011 2:03 PM
Edited by: Xavier on Aug 4, 2011 2:32 PM

JPEG/PSD issue--I open a jpeg and edit it (levels, crop) and then "save as" and the save as option shows there are now levels in the image and it wants to save it as a .psd file or a copy with layers. What am I doing that has these settings appear?

JPEG/PSD issue--I open a jpeg and edit it (levels, crop) and then "save as" and the save as option shows there are now levels in the image and it wants to save it as a .psd file or a copy with layers. What am I doing that has these settings appear?

16bit? Pixels extending beyond the canvas? (from a crop with delete unused pixels turn off). Have you previously been saving PSD files?
IME you sometimes have to tell Photoshop that the first save of a session is JPG, and it remembers from there on. The way to 'tell' Photoshop that JPG, or PDF, or PNG etc are now your preferred format is to Ctrl (Cmd) click on that format in the Save As drop down list. So long as the file does not have parameters that your chosen format does not support, then this should work for you.
[EDIT] Just noticed that you did include 'Crop' in the subject line. Do you have 'Delete cropped pixels' checked?

How can I get the same candy crush level on my phone and iPad?

How can I get the same candy crush level on my phone and iPad?

The only way to synchronize is connecting to FaceBook. I just set up my girl friend's iPhone to connect with FaceBook, which then updated the phone's level; then I downloaded the app (again) on her iPad and selected connect to Facebook. I'm not sure what the downfall of synchronizing through FaceBook is.... all I can tell you is it worked and now her iPad shows the same level as her iPhone. Good luck!

Privilege Levels on FWs, switches and Routers

One question - I am bothered with the privilege level settings.
Is there a default mapping between a priv lvl and teh commands you are allowed to execute or one needs to define that.
EX: I want somebody to only have the right of executing sh run on a device and nothing more.Can this be done?
Thx,
Vlad

I would start by configuring a privilege level and then use the ? to list all the commands available at that level.
privilege level 0 - Includes the disable, enable, exit, help, and logout commands.
privilege level 1 - Normal level on Telnet; includes all user-level commands at the router> prompt.
privilege level 15 - Includes all enable-level commands at the router# prompt.
Commands available at a particular level in a particular router can be found by typing a ? at the router prompt. Commands may be moved between privilege levels by using the privilege command, as illustrated in the example. While this example shows local authentication and authorization, the commands work similarly for TACACS+ or RADIUS authentication and exec authorization (more granularity in control of the router may be achieved with implementation of TACACS+ command authorization with a server.)
Additional details on the users and privilege levels presented in the example:
User six is able to Telnet in and execute the show run command, but the resulting configuration is virtually blank because this user cannot configure anything (configure terminal is at level 8, not at level 6). The user is not permitted to see usernames and passwords of the other users, or to see Simple Network Management Protocol (SNMP) information.
User john is able to Telnet in and execute the show run command, but only sees commands that he can configure (the snmp-server community part of the router configuration, since this user is our network management administrator). He can configure snmp-server community because configure terminal is at level 8 (at or below level 9), and snmp-server community is a level 8 command. The user is not permitted to see usernames and passwords of the other users, but he is trusted with the SNMP configuration.
User inout is able to Telnet in, and, by virtue of being configured for autocommand show running, sees the configuration displayed but is disconnected thereafter.
User poweruser is able to to Telnet in and execute the show run command. This user is at level 15, and is able to see all commands. All commands are at or below level 15; users at this level can also view and control usernames and passwords.
HTH

How to customize the infoview and dashboards.

Post Author: [email protected]
CA Forum: WebIntelligence Reporting
Hi all,
how to customize the infoview and dashboards.
scenerio1: all users should have same look & feel of infoview. - please tell me the steps how set the preferences for this scenerio.
scenerio2: every should have different look and feel (example user1 should have different view with user2). - please tell me the steps how set the preferences.
Thanks,
Madhu.

Post Author: Use_BO
CA Forum: WebIntelligence Reporting
Hi Madhu,
For Scenario 1 : Go to CMC.
Go to : Home > BusinessObjects Enterprise Applcations > InfoView
You can customise Inforview properties and Rights here, like setting up ur logo,style sheets etc.
For Scenario 2: Each User will have to customize their own Infoview.
Go to Infoview. On the top right corner will be 3 icons. Click on the 'Preferences' icon.
In the General tab of preferences you can customise the infoview settings.
Hope this helps.
Thanks!!

View Customization Table changes and Data table base changes in a report

Hi All,
How to view Customization Table changes and DAta table base changes in a report ,
Is it right transactions: SCU3 or RSVTPROT
Also plz let me know the concept of audit trial,
Thanks
SD

Hi,
Changes to master data objects must be captured for the For compliance purposes. The auditor allows you to be able to view and print an audit log of changes to master data objects for a chosen period. It is very common for external auditors to focus on what has changed from one year or quarter to the next to help determine the nature, extent, and population for testing. To configure and access your audit log, perform the actions listed with each of the following utilities.
Audit Trail is used to track the record changes.
The report RPUAUD00 gives all the changes done to the masterdata by any user anytime.
But, before using this audit trial, please ensure that the system hardware is well equipped as the audit trials activation would later become a performance issue as this would occupy a lot of space in the coming time.
Best Regards,
Venkat.

Aggregation table - Diffrent agg levels for base table and agg table

Is it possible to have Different aggregation level for base table and Aggregation. Say sum on a column in AGG table and Count for the same column in Fact table.
Example
Region,Day_product,sales person, customer are dimensions and Call is a fact measure
FACT_TABLE has columns Region, Day, Product, Sales person,Customer, Call
AGG_TABLE has columns Region, Month,Product, call
We already have a Logical Table definition for the fact table say FACT_CALL
We have a Logical column called No of customers.
For the Data source as FACT_TABLE Formula for the column is "Customer" and Aggregation level is count distinct.
But agg table we already have a calculated column call TOT_CUSTOMERS. which is been calculated and aggregated in the ETL.
IF we map this to the logical column we have to set the formula as TOT_CUSTOMERS and we need to define aggregation type as SUM as this is at REGION, MONTH AND Product level. But OBI does not allow to do so.
Is there a work around for this? Can you please let us know.
Regard
Arun D

The way BI server picks up the table that would satisfy the query is through column mappings and contents levels. You have set the column mappings to TOT_CUSTOMER, which is right. When it comes to aggregation, since its already precalculated through ETL, you want to set the aggregation to SUM. Which I would say - is not correct, you can set the aggregation to COUNT DISTIMCT which is same as that of the detailed fact. But set the content levels to month in date table, and appropriate levels in region etc., So now BI Server will be aware of how to aggregate the rows when it chooses the agg table.

In data packet level error like red and .......... like symbol how r?

hi expert,
in data packet level error like red and .......... like symbol how would i rectified
this type error please expert give me solution i will be give point friends bye

Hi
If it is the delta update,make the status of that on as STATUS NOT OK and repeat the infopackage again.if it is full run the IP simply.check the data has came to PSA or not,if it has came u push it manually to targets

Customize transport bar and save changes?

Am I missing some here but if I customize the transport bar and make changes, close logic and open it again those changes are not there? Shouldn't my changes to the transport bar remain? How do I save them as standard for all projects? I just want the pre-fader metering button there on all my projects.

No the changes in the transport bar are project dependent (this is not an overall preference setting) so you have to customize your template and take it from there.

Adobe Customization Wizard 9 and acrobat reader

Im trying to customise the acrobat reader with the Customization Wizard 9 and even if set some option like disable the check for update even after deploying the msi the option still there i also try to disable the EULA when you first start the program neither ..... still apear the first time i start acrobat reader
Thanks

As you are installing Adobe Reader 9 over Acrobat 8 then you need not worry about checking those greyed out options.
When you will install Adobe Reader 9, the Reder setup will not uninstall any previous Acrobat 8 version on it own.
So, you can go ahead and install Reader without worrying about these options. The Reader setup will only prompt during installation that whether to make Reader or Acrobat 8 the default viewer of PDF files.
These options have only been provided for the situation when, say, Acrobat 9 is being installed over Acrobat 8, then it gives the user an option to choose whether to remove previous version of Acrobat or not. Because newer Acrobat versions remove previous Acrobat versions before installation, which is not possible with the Reader setup.
That said, please note that it is not recommended to use Reader and Acrobat on the same machine, Adobe doesn't recommend this.

How to customize the prev and next buttons separately in slideshows?

Is there a way to customize the prev and next buttons separately in slideshows in muse? When I import a background image that looks like a right arrow it puts the image for both prev and next buttons. I import it by selecting the next button, and then clicking on the folder icon labelled "Image" in the Fill drop-down menu in the Tool bar at the top of the Muse page.

Yes, it should be very easy. Here is how I do this:
First, I move the arrows onto the image, and double click the box so that I can remove the arrow character.
Then, I go up to the "Image Fill" and click the file icon to fill with an image
Then, I select the other arrow, and do the same
Hope this helps!
Julia

Level Customization in SOP and RTSOP Worksheets

Similar Messages

Maybe you are looking for