Level one certification

hello, since i have a job now i am going to start studying for level one certification w/ final cut. my question was are the classes basically what the book covers. those classes are expensive and i have the book (apts) so i was just going to study that and then take the exam. also, i tried looking on the website, how much is the online exam or if you decide to go to an apple store (if you can), how much is that?
thx

You must be rather proficient in Final Cut in order to pass the certification exam. The whole process is explained in detail here:
http://training.apple.com/certification/proapps
Study Diana Weynand's book and contact the nearest Apple Authorized Training Center to take an exam. Apple Stores do not participate in training and certification. US$150 that Red Jacket Mike has mentioned is probably the highest fee you may get charged, some Centers may charge a bit less. Also, search this forum for "certification" and lots of different opinions will turn up.
Good luck with the exam.

Similar Messages

Levels in Certification

Hi Experts,
What are the differnt levels we have in BI Certification.?
Which one is the highest level and what is the corresoponding Test?
And finally which is considered high in teh market?
Thanks in advance.
DV

Hi,
You can go for the certification in diffent versions of BW.
The latest version is BI 7.0 ( SAP Netweavers Business Intelligence 2004s).This is the highest level of certification in BW now.
You can also take certifications in prior versions like BE 3.5 or BW 3.0b
Hope this info helps.
-Subhashini

Associate Level Direct Certification - ABAP 7.0 (C_TAW12_70)

Hi all,
I am planning to take the certification ABAP 7.0 (C_TAW12_70) which is Associate Level Direct Certification .
Which versions of TAW10 and TAW12 do I have to refer for the Certification ?
I have TAW10_1 - ABAP Workbench fundamentals part 1 with course version 2005/Q4 ; material number 50077028 and part 2 with material number 50077029
Also , TAW12 part 1 and part 2 has version number 2005/Q2 and material number 50077373.
Are these the latest versions for the certification which I can refer too ?
Also, the course curriculum mentions TAW11 and TAW11E. Where can i find the books ?
If any one has the Softcopy of the same , please let me know .
Else, is there any book in the market which covers these topics ?
Thanks
Supriya Murudkar .

Hi!
Although we cannot have Questions but, I can forward a link on which SAP has provided some samples. Here it goes --
Link: [url] http://www.sap.com/services/education/certification/schedule/PABAP70.epx
Link: [url] http://www.sap.com/services/education/certification/schedule/CTAW1270.epx
For pattern of examination --
Link: [url] http://www.sap.com/services/education/certification/certificationtest.epx?context=[[C_TAW12_70|G]]|
Hope you can get an insight.
Kumar Saurav.

What level of certification is required for ECC 6 upgrades?

Hi everyone,
I'm already a ceritifed SAP technology consultant (up to NW2004), however need to update my certification for ECC 6 (netweaver 7).
What is the appropriate exam to sit (eg associate or professional) to be allowed to perform productive SAP ECC 6 upgrades?
Thanks
Shaun

Hi everyone,
Major update on the "do you need to be certified" topic ...
I finally got a reply from SAP Education regarding two queries I had regarding what level of certification was required as a basis "guy" to perform production SAP installations and upgrades.
SAP Education wrote:
You don't need to be certified to do installations. In reality, customers will have much more comfort having an install done by someone who is certified rather than someone who isnu2019t, but ultimately itu2019s the customeru2019s call.
I then asked if this was applicable for SAP upgrades also ...
SAP Education wrote:
Hi Shaun,
Indeed it is.
Best of luck!
I then went on to clarify that their is no support implications for customers who don't you certified Basis personel to perform their upgrades/installs:
Shaun wrote:
So your saying that although itu2019s preferable to be certified ... you donu2019t have to be, and there is no impact to the support provided by SAP?
SAP Education wrote:
Ultimately, SAP cannot mandate for individuals (excluding those employed by SAP) or SAP Partners to be certified to work on projects. However, customers and partners will employ the consultants to work on the projects, from what we have seen recently customers and partners are now asking for SAP certified consultants to work on implementation and upgrade projects.
Thus we suggest to have an advantage to be employed on future SAP projects that you are certified in the solution you will be working on, or upgrading to.
Example: If you are looking to work on an upgrade from CRM 5.0 to CRM 7.0 the customer would look for certified consultants in CRM 7.0
So it is solely up to you if you wish to certify yourself in the latest release of the solution you are working in.
I then rang SAP education and had a very pleasant discussion with one of the ladies there. She went on to explain that the requirement for certification really became an optional thing a few years back. SAP was no longer in a position not to support customers regardless of who they use to perform their upgrades/installs since a customer continues to pay their yearly maintenance costs - thus SAP is obligated to provide support.

Two production orders at the header level one for one single requirement

Hi Gurus, Please provide me your valuable suggestion on the issue.
*Client wants to have a only two production orders at the header level one for one single requirement .*
1) Manufacturing Order u2013 In this order for Finsihed prodcut system should pick all the assemblies whcih are manufactured inside i.e depending on the material type.\
2) Assembly order u2013 In this order system should pick all the assemblies whicih need to be assembled also procured or subcontracted items in this order against depending on the material type.
It means for Sales order of 5 EA there is going to be only 2 order ( MFG & assy order).
For Example.
L45-7000 is the header material now client wants only two production orders one Manufacture order and anothe Assmebly order , thet dont want to use Phantom assembly concept and also multiple production orders for SFG.
Please confirm if this requirement can be mapped in SAP ?
Thanks...

Hi Shishir,
As soon as each order is related to only one material, if your manufactured (or purchased) assemblies are of different materials, you will have a separate order for each material rather than a single order for all manufactured assemblies. I don't thing all your assemblies are of the same material - thus I would say no, it is not possible to map your requirement.
Regards,
Sergiy

Exporting files to a eps postscript level one

hello all.
We have just bought a new cutter plotter and the software that was supplied was artcut for a PC, I use a Mac and would like to use Illustrator (CS4) as the main design programme but to import the files into Artcut the need to be a eps postscript level one - does anyone know of a plugin that can be used to do this?
if you need more info please ask.
Thanks
Craig_5br

Craig,
I wonder whether it can be done from version 8 or something. I can choose between level 2 and 3 in 10, 1 is shown but greyed out so I believe it is possible if the version is old enough.
If you (still) have one of the old versions, you may have a look and see; hopefully you can downsave and take it from there. Someone else might tell us.
Someone?

Hi, anyone given associate level BI certification Recently?

Dear Experts,
Can anyone tell me the recent paper pattern of Associate Level BI Certification?
Please provide me with Question Paper Pattern, Marking Scheme and Negative Mark(if there) and recent sample paper.
Regards,
Vaishnavi
Edited by: VaishnaviS on Jan 13, 2010 7:26 AM

Hi VaishnaviS,
here I just want to focus you on official SAP information about certification:
[ certification finder|http://www.sap.com/services/education/certification/certificationfinder.epx]
E.g. SAP Certified Application Associate- Business Intelligence with SAP NetWeaver 7.0
[Test info|http://www.sap.com/services/education/certification/certificationtest.epx?context=[[C_TBW45_70|G]]|]
Please note that you need to have real project experience plus theoretical knowledge prior taking exams.
For theoretical knowledge go through SAP training materials BW*.
Good luck
m./

Level One WBS Element as Acct Assignment Element

Dear Friend's
My user have created one project, In that there are various levels WBS Elements.
Normally we never tick Level One WBS Element as a Acct Assignment Element.But User have made Level One WBS Element as Acct Assg Element and then Project is Released.So now I can't remove that tick because that field is Grayed out or Freezed.
Now i wanted to Remove or Undo Release status and then I have to remove Acct Assg Element Tick.
Pls guide me on this issue.
Thanks in Advance.
Regards,
Sandeep N.Theurkar

Hello,
I had not seen this problem before. So i checked it in my system. But i didn't see this
happening for me.
I think once system status is in REL (released) status you cannot reverse it. According to me Acct.
assignment field become gray only when posting is made against that WBS and not after release.
Pls check it and inform.
Regards,
Ashish Kulkarni

Body Level One?

OK first I just wanted everyone to know that Apple just posted an +iWork update+ for all 3 programs...
Now here's our question... We're trying to learn how to use Keynote, and we've even purchased the Apple '08 training book. In this one section it tells you to "click on the text box and hold down the shift key" and then click on "Body Level One". The only problem is that NOTHING called +Body Level One+ is showing up anywhere We've tried reading this section of the book several times, restarted the program, etc, but still no joy finding anything to do with a "Body Level One". Does anyone know what they are talking about? BTW - If anyone has the Apple iWork '08 book it's on page 153 - +step 7+.
Thanks

Hi Lorna. Right now we are stuck on page 159. It says in step 2 to click on the right side of the canvas +(so you can remove the media place holder)+ but there is nothing there to remove We have tried several 'Photo- vertical' master slides with no joy. Also, the book talks about a file called "Creating Photo Cutout Photoshop.pdf" being on the books CD +(lesson 5)+ but no such file seems to exist.
Regarding 'Body Level One" +(page 153 step 7)+ I "think" it is just a term used to talk about a group of text, BUT I can't confirm that, as there is nothing on the net explaining it, not even at Apples own web site I have seen the term used in other places, but no reference as to what a "Body Level X" is. Ordinarily I would suspect a 'body level' to be something similar to a layer in a graphics program, and I know that Keynote does have layers, but nothing to confirm one way or the other exactly what a body level refers to.

Need help with Business One Certification

Hello,
I need help preparing for the B1 certification. I have taken the test once already and failed. I found it very tricky with multiple correct answers for each question.
I have gone thru the eLearning several times now. And this week I am taking the instructor led training. I have also purchased and studied the Ebook. I have a good grasp of the product, but I feel that this is not enough to help prepare for the test.
I want to know if there are any other resources I could use to help prepare for the test. Are there any practice exams
Any and all help is appreciated
Thank you!
John
jseftonATsophlogic.com

Hi John,
when I was studying for the 2007 certfication I found the info in the DRC & the ETSs very good.
Channel Partner Portal -> Solutions -> SAP Business One -> Solution Overview -> Additional Resources -> Documentation Resource Centre
There was also a lot of info on the Landing pages:
Channel Partner Portal -> Solutions -> SAP Business One -> Hot Topics-> SAP Business One 2007 information centre -> lots of links to individual landing pages, pdfs etc.
Good Luck!
All the best,
Kerstin

How to Get Training for SAP Business One Certifications

Training paths for the C_TB1200_88 Implementation and Support Consultant certification:
Classroom Training
                                 - TB1000 Logistics (multiple languages)
                                 - TB1100 Acccounting (multiple languages)
                                 - TB1200 Implementation and Support (multiple languages)
Self Study
                                -   Product Training e-learning
                                 - Study Guide
Guided Self Study
                                 - Virtual Course for TB1000 and TB1100 combined with Product Training e-learning
A Practice Test is available for the C_TB1200_88 certification.
Training paths for the C_TB1300_88 Development Consultant certification:
Classrom training
                                - TB1300 Software Development Kit
Self Study
                                -   Development Consultant e-learning
More details can be found on the channel partner portal on the Education page for SAP Business One. Choose the Role-Based Training link.

Hello Daniel,
Don't know whether this link will help. It contain all the tables in SBO
https://websmp203.sap-ag.de/~sapidb/011000358700003984512006E.pdf
XL Reporter 2005 SP01 - Meta Data Description (valid for for SAP Business One A SP01)
Chris au st.

SAP Business One Certification Updates

The SAP Business One release 2007* certifications will expire in the partner program at the end of 2011 when the 2007 release goes out of mainstream maintenance.
Additionally, prices for certifications taken at Pearson Vue centers will increase on August 15.
Therefore, it may be to your advantage to consider taking an 8.8 certification exam in the near future.
Currently, the passing scores for the 8.8 exams are as follows:
C_TB1200_88: 64%
C_TB1300_88: 57%

Hi,
When one has had an unsuccessful first attempt with the TB1300, there are 2 attempts to resit the exam.
Certificates are for specific Business One versions and they expire when that version is taken off the mainstream support i.e TB1300 Certificate for SBO 2007 is invalid in 2012. Would it be possible for one to wait till the next release of Business One is out to sit the TB1300? (Version 9 of Business One).
Will one be eligible or is it a must to be successful on the 8.8 version first?
How long does it take between the time SAP releases a new version i.e Version 9 to when the certification exams are ready to be taken for the newly released version?
Do the exam pass marks change with new Business One releases i.e do they go higher or lower than the current pass marks?
I appreciate your assistance.
Kind regards,
Esau.
PS:
@ mburnejko
Your blog did answer some questions I had about TB1200 course - hopefully, others found it enlightening as I did.

Sample questions for Business One certification

Hi
I am looking some sample questions for SAP business one implementation consultant certification exam.
please Gurues , help me in this matter. I am going to write certification in next week
thanks
Preeti Sati

Hi Preeti,
the test is not that easy, I found that I really had to read the questions carefully & the multiple-choice answers even more carefully. Some of the answers initially looked as if they were saying the same thing & I needed to look twice to discern the tiny difference. It's these tiny differences that made it difficult, in my opinion.
Generally, I thought it touched on most aspects of 2007, with particular emphasis on the enhancements from lower versions. But if you have a good understanding of the product, look at all the e-learning & also, very important, at the available ETS & documentation, you should do well.I found the e-learning a bit limited & definitely benefited from the other materials available on the SMP.
Good Luck!
All the best,
Kerstin

How to include non-joining records from level one in the lowest level?

As an example the dimension has three levels with data coming from three source tables. The relationships between these tables are zero to many. As a result of this e.g. there are records at the first level that do not join to the second table for level two, i.e. there is a customer entry but the customer has not acquired any products. However, we would like to see in the query for the lowest level also the customers that didn't acquire any products. They are there when there is no filter for the lowest level, but that returns duplicate data. I was hoping I could accomplish this by using outer joins when loading the dimension, but it loads the same as without the outer joins. Hopefully, this trivalized example describes what I am trying to accomplish.

You won't be able to have a true "default" value in the various cascading levels, since there aren't default values in a dynamic cascading parameter. That being said, I've created a sample report in Crystal Reports 2008 that has a Command-driven DCP with '*' values for the 2nd and 3rd levels of my 3-tier DCP and have accounted for them in the record selection criteria. You can find the sample here at https://www.box.net/shared/mav5qp337j

How to open with only level-one bookmarks showing

I know how to set my initial view so the Bookmarks pane is open. However, is there a way to set the level of bookmarks that are shown? I have created my PDF by merging a lot of smaller files, many of which were created from MS Word, so there are many levels of bookmarks and it's overwhelming for a user to see all of it when the document first opens.

In Acrobat close the levels of bookmarks and save the document with File > Save As

Level one certification

Similar Messages

Maybe you are looking for