Level Tool is not working

Hey I am trying to adjust the noise level with the level tool but its not working. I move the arrows every which way see that it changes. I get it to were i want it them press ok and it only cheanges a little bit. It become what it was in the preivew. The level tool works when I add it as a new ajustment layer but I don't want like that I want to be able to copy the new level of noise I just made and can't if I add new adjustment. what should I do to fix this? O and this is the trial version and It wasn't wroking eailer with lots of other tool but i uninstalled it and now they are working except the level tool how I want it to.

To see actual adjustments, especially on a detailed, high contrast image like noise, you need to view at 100% (Actual Pixels)

Similar Messages

  • Text keeps disappearing when I select it to make type at all / make changes / edit. Type tool is not working. I am running CS6 on a Macbook Pro Retina (which I am hating!) 10.9.4 - wish I'd never upgraded.

    Text keeps disappearing when I select it to make type at all / make changes / edit. Type tool is not working. I am running CS6 on a Macbook Pro Retina (which I am hating!) 10.9.4 - wish I'd never upgraded.
    Photoshop General Discussion

    The RAM needs specs as shown below.
    Maximum Memory
    16 GB (Actual) 8 GB (Apple)
    Memory Slots
    2 - 204-pin PC-10600 (1333 MHz) DDR3 SO-DIMM

  • For Acrobat 9. TouchUp Text tool does not work.

    Acrobat 9. TouchUp text tool does not work --- even on documents created with my computer using installed fonts. Problem 2: when trying to export to Word 2010 there is no option for format .dox, only .doc which belonged to earlier versions of Word.

    Hi Begin,
    I have the same issue, I am not sure which version so I had on my old computer but when I got a new windows 7 64bit, and asked IT to install Adobe, my life turned upside down. now they asked if I need X or 9pro and I though 9pro is the latest and greatest.. they installed the standard first then could not edit then asked for the pro and could not edit ... now I search and maybe version X will edit but if the document is signed and we do need to do lots of editing after the signature then what is the solution??
    I hope the Guru in Adobe can help here soon please :-)!!
    Joseph

  • Multi Level BOm is not working in SAP afs

    Hi Experts,
             I am facing issue in MRP.For multi level bom's ,Requirements is not getting generates.Is there any settings is there to active multi level bom for afs materials.
    please suggest solution
    Thanks and Regards,
    Deepika.

    Hello Deepika,
    As we know AFS materials are planned at SKU level (Grid and stock categories)  you can use AFS MRP (/N/AFS/MD02) only.
    Please refer OSS note Note 981747 - FAQ - AFS Production Planning
    Question 5 Made-To-Order Planning -Multi-Level (MD50) does not work for AFS Materials and Sales Orders containing AFS materials.
    Answer: Made to Order Multi level planning functionality was never enhanced for AFS and hence transaction MD50 is not supported.
    Steps are as,
    1. Create a MTO/PTO sales order for an AFS material.
    2. Run AFS MRP using transaction code /AFS/MD02.
    3. Convert the planned order to production order.
    Best Regards,
    R.Brahmankar

  • For  MTO scenario,multi level bom is not working sap afs pp

    Hi Experts,
                  We are implementing MTO scenario for our client. I have maintained  strategy group for FERT is 40 and strategy group for HALB and ROH are 20.
                   For single level BOM , requirements is not getting generates properly.
                  I would like to know What are all the settings is required to create AFS BOM.(single and multi level)
                   Please suggest me.
    Thanks & Regards,
    Deepika.

    Hello Deepika,
    As we know AFS materials are planned at SKU level (Grid and stock categories)  you can use AFS MRP (/N/AFS/MD02) only.
    Please refer OSS note Note 981747 - FAQ - AFS Production Planning
    Question 5 Made-To-Order Planning -Multi-Level (MD50) does not work for AFS Materials and Sales Orders containing AFS materials.
    Answer: Made to Order Multi level planning functionality was never enhanced for AFS and hence transaction MD50 is not supported.
    Steps are as,
    1. Create a MTO/PTO sales order for an AFS material.
    2. Run AFS MRP using transaction code /AFS/MD02.
    3. Convert the planned order to production order.
    Best Regards,
    R.Brahmankar

  • When i paint either black or white on layer mask it erases picture pixels also path selection tool does not work

    when I paint either in black or white on layer mask it erases picture pixels also path tool does not work

    I would try resetting your preference file first:  http://www.lightroomforums.net/showthread.php?14226-Resetting-(or-Trashing-)-the-Lightroom -Preferences-file
    Also, install the latest version 4.4.1 would probably be a good idea.

  • BW Field level Autorizations are not working in the WEBI Reports

    Dear All,
    1. I have created Authorization roles with Infoobjects Authorization Objects.
    2. In Bex Query Authoizations are working on the Infoobjects like for
    Ex: For USER1 I have given Company code = 1000 &
    User 2 I have given authorization for 1100.....
    3. Import those roles into Business Objects-CMC.
    4.Users were Imported.
    But in the WEBI Reports BW Field level Authorizations are not working i.e for USER1 authorization for Company code is 1000 , in WEBI report it is showing all the Company codes data for USER1.
    For USER2 also showing all the data in the WEBI report.
    Plz help me on this issue.
    Thanks,
    Kiran Manyam

    Hi,
    For Authorization to work in BO you can check the following:
    1. You need to create authorization variables in your BEx query.
         Also these variables should not be input ready.
    2. While creating universe in BO you need to select "Single Sign On" option available in the parameters iwhile creating a new
        connection.
    Regards,
    Rohit

  • Is their a fix for photoshop elements 11 move tool? Not working with Yosemite OS upgrade.

    Is their a fix for photoshop elements 11 move tool? Not working with Yosemite OS upgrade.

    Hi,
    We sincerely apologize for the problem customers are facing while using a trackpad with Photoshop Elements 11 & 12 on Mac OSX 10.10 (Yosemite).
    We have been actively working with Apple to resolve this problem as quickly as possible. We're hopeful this will get completely resolved in an upcoming update of Yosemite(MAC 10.10).
    In the meanwhile, you have two options to work around this problem:
    1. Option1: Use a mouse instead of the trackpad
    2. Option2: Install a plug-in which should workaround the problem
    Plug-in installation instructions:
    1. Close Photoshop Elements
    2. Download this zip file to a location you can easily find (e.g. your desktop)
    3. Unzip the file, WhiteWindowWorkaround.plugin, and move it to the Plug-In folder:
    • For Elements 12 – //Applications/Adobe Photoshop Elements 12/Support Files/Plug-Ins/
    • For Elements 11 - //Applications/Adobe Photoshop Elements 11/Support Files/Plug-Ins/
    You can verify the plug-in is installed by launching the Photoshop Elements Editor and choosing Help > System Info... Scroll to the bottom of the text in the dialog and look for the plug-in name "WhiteWindowWorkaround.plugin".
    Note: This plugin is a temporary workaround and should be used until this issue is addressed in Mac OSX 10.10 (Yosemite). Please remove this plugin once the issue is officially resolved by Apple.
    If you are using a stylus in conjunction with a trackpad, you might see issues with your trackpad. Workaround in this particular case is to use mouse instead of the trackpad.
    Hope this helps!
    Regards,
    vaishali

  • I have a comment.  I am very upset with Photoshop and all your tutorials regarding the quick select tool.  I have watched many tutorials and read instructions until I am blue in the face.  This tool does not work.  It is all over the place and all of your

    I have a comment.  I am very upset with Photoshop and all your tutorials regarding the quick select tool.  I have watched many tutorials and read instructions until I am blue in the face.  This tool does not work.  It is all over the place and all of your tutorials make it look so simple.  How can you advertise this as a viable tool when it just doesn't work?

    It is all over the place and all of your tutorials make it look so simple.
    This is a user to user Forum, so you are not really addressing Adobe here, even though some Adobe employees thankfully have been dropping by.
    How can you advertise this as a viable tool when it just doesn't work?
    Concluding something does not work because you fail at using it is not necessarily always justified.
    The Quick Selection Tool certainly has limitations, but your post seems to be more about venting than trouble-shooting – otherwise you might have posted an image where you failed to get an expected result.

  • People anyone know because the logo in title tool is not working?

    people
    anyone know
    because the logo in title tool is not working?

    A little more information, please:
    Version of PPro?
    Operating system?
    Exactly what are you doing and what happens?
    A screen shot would be helpful.

  • Brush Tool is not working with Layer Mask

    Working with Windows platform, using Photoshop CS4, Brush Tool is not working with Layer Mask, how can I resolve this challenge?

    Also, do you have any Selections active - maybe hidden?
    When you have your Layer Mask's Channel active, do your Colors change to black and white?
    Good luck,
    Hunt

  • My sharpening tools are not working.  Can somebody help?

    My sharpening tools are not working.  Can somebody tell me how to get the tools restored to the way they were when I first downloaded the software?  Thanks in advance

    Hello Kellyjordan!
    In addition to Silkroosters great instructions, I have attached a visual to assist you.
    Hope that helps you in your quest,
    Janelle

  • The paint bucket tool is not working properly. The colors does not change, any suggestion?

    The paint bucket tool is not working properly. The colors does not change, any suggestion?

    Maybe on the wrong layer.
    It would be more beneficial if you capture your screen with the layers panel open and any layers that are collapsed, expand them.

  • My move tool is not working

    I am using photoshop elements 12 my move tool is not working properly. To move an object I have to click on free transform so I can move it. I am using a mac & have upgraded to Yosemite operating system

    Hi,
    We sincerely apologize for the problem customers are facing while using a trackpad with Photoshop Elements 11 & 12 on Mac OSX 10.10 (Yosemite).
    We have been actively working with Apple to resolve this problem as quickly as possible. We're hopeful this will get completely resolved in an upcoming update of Yosemite(MAC 10.10).
    In the meanwhile, you have two options to work around this problem:
    1. Option1: Use a mouse instead of the trackpad
    2. Option2: Install a plug-in which should workaround the problem
    Plug-in installation instructions:
    1. Close Photoshop Elements
    2. Download this zip file to a location you can easily find (e.g. your desktop)
    3. Unzip the file, WhiteWindowWorkaround.plugin, and move it to the Plug-In folder:
    • For Elements 12 – //Applications/Adobe Photoshop Elements 12/Support Files/Plug-Ins/
    • For Elements 11 - //Applications/Adobe Photoshop Elements 11/Support Files/Plug-Ins/
    You can verify the plug-in is installed by launching the Photoshop Elements Editor and choosing Help > System Info... Scroll to the bottom of the text in the dialog and look for the plug-in name "WhiteWindowWorkaround.plugin".
    Note: This plugin is a temporary workaround and should be used until this issue is addressed in Mac OSX 10.10 (Yosemite). Please remove this plugin once the issue is officially resolved by Apple.
    If you are using a stylus in conjunction with a trackpad, you might see issues with your trackpad. Workaround in this particular case is to use mouse instead of the trackpad.
    Hope this helps!
    Regards,
    vaishali

  • Seletiion tool is not working

    The selection tool is not working having proplems xxx@

    Then it would seem that this moderator doesn’t know his arse from his elbow.
    There may be various reasons for a selection tool not working. I suggested two possible causes and two possible ways out.
    But no-one knows what is wrong yet and I object to having a line of enquiry cut short by being marked as answered when it’s not.I prefer to get to the bottom of things.
    So, Mister Moderator, if you see this, will you kindly refrain from making assumptions and mark this question as Unanswered!

Maybe you are looking for

  • Bind variable error

    Hi guys i need to pass "student:1234567" like values to below mentioned function.... but after passing this value i am getting error SP2-0552: Bind variable "1234567" not declared. Please help me what i am doing wrong. create or replace function func

  • ITunes won't automatically open

    When syncing my iPhone, on my phones page I have the box checked to open iTunes when phone is plugged in but it's not opening. Why not?

  • How canI change the date format from mm/dd/yyyy to dd/mm/yyyy in FirefoxOS?

    I have just received and am trying out things my new Alcatel Fire E with FirefoxOS 2.0.0.0 (just updated). It is usual in most operating systems to be able to customize the date and time settings (amongst other things). After a few fruitless hours fi

  • LabVIEW - Activex Internet Explorer Communicat​ion - Question

    Hi I have a code which can generate a URL(https:\\.....) to talk to a server. The server in turn sends my code a response. I've used ActiveX to enable the communication over a secure network.When I make a change in the URL I send to the server, I exp

  • DROID 4 & WPA/WPA2

    Todyay, I received a new MI424WR Rev I router to fix a data corruption problem that I was having.  Revision I has WPA/WPA2 security capability.  I can connect my Sirius/XM internet radio when the router is set to WPA or WPA2, but I can't connect my D