Levels and options that exist in SAP

Hi,
I'm an engineer in Telecoms specialing in 3G network but now wants to move to SAP.
What levels and options exist, I tried to look on the website and without a success
Please assist

There are options: you have to read and decide due to your tendency.
https://training.sap.com/tr/en/courses-and-curricula/business-objects-information-management
or
Courses & Curricula | BusinessObjects Business Intelligence
cheers,
Sarhan.

Similar Messages

Consume a WebService that exists in SAP ECC 6.0

Hello evrybody,
I have a requirement that I've never done before, I have a webservice in transaction WSADMIN in a SAP ECC 6.0, and I need to consume it from PI but I don't know how, I've worked before with BAPI's and ABAP Proxies but never with WebServcies like this, do you know any documentation or maybe a blog on how to do this?, thanks in advance.
Regards,
Karla

Thanks for your answers, I've used ABAP Proxies before, but in the way of generating an ABAP Proxy of a Inbound or Outbound interface from the IR, now I need to consume a WebService already created in SAP ECC 6.0, and I've never donde this before, I'm trying to understand that using SOAP Adapter I should get the WSDL File of the webservice and upload as an External Definition in the IR, but where could I get the URL to consume the webservice that exists in SAP ECC 6.0, thanks.

Can old compensation module and ECM co-exist in SAP

Hi All,
Do you know if old Compensation module and ECM can co-exist in an SAP instance. My client is on 4.7 and they have implemented one bonus plan using the old compensation module in the past but would like to configure additional comp plans using ECM (new functionality).
Please advise if it is possible as old comp uses info types such as 380 and new ECM uses new info types 758, 759, 761 etc.
Regards,
Sanjay

Thanks Donnie !
Actually, that is what I thought.
But, if they activate ECM now, then what will happen to the old award records (compensation adjustment records) that exist in info type 360 etc. for previous year comps. Any thoughts ?
If you have any documentation on this then please do send me the url.
Regards,
Sanjay Gera

Access to Export formatting options that may not be readily available?

How can I access Export formatting options that existed in CR XI using CR VS2010?
I am converting an app from CR XI to CR VS2010 and am attempting to generate DiskFile exports. The general process is succesful, but there certain formatting options I cannot find in the API:
NumberOfLinesPerPage(n);
UserDefinedCharactersPerInch(n);
CharFieldDelimiter(c)
UseReportDateFormat(b)
UseReportNumberFormat(b)
I have found some mention that some or all of these are still available via the RAS interface. Given my efforts in updating my database connections on the fly, I am now somewhat versed in RAS access, but am struggling with how to use it to format my exports. Can I set the above options somehow, and if so are there any examples of how to do this?

Yes, the RDC. In fact, I was reading a doc entitiled Migrating from RDC to .NET which had this:
ExportOptions.UseReportDateFormat
RDC
Set the date format to be the same as report.
Report.ExportOptions.UseReportDateFormat = True
.NET
Not supported in the .NET assemblies, but supported in the ReportClientDocument object model provided with the Report Application Server (RAS). RAS is available with Crystal Reports Server and BusinessObjects Enterprise.
ExportOptions.UseReportNumberFormat
RDC
Set the number format to be the same as report
Report.ExportOptions.UseReportNumberFormat = True
.NET
Not supported in the .NET assemblies, but supported in the ReportClientDocument object model provided with the Report Application Server (RAS). RAS is available with Crystal Reports Server and BusinessObjects Enterprise. 1/3/2006 4:51:00 PM Copyright © 2006 Business Objects. All rights reserved. Page 44
crxi_r2_migrating_from_rdc_to_net.pdf
I admit I missed the Text Format properties. Thank you. I'm just not a heavy with this. In the RDC, when I set UseReportNumberFormat and UseReportDataFormat then that would apply regardless of my output file type. With this, it seems only to apply to CSV.

Exporting to QuickTime in HD - What codec and options?

I am looking into what is the best option to export movies created with iMovie 08 in HD. My workflow is as follows:
JVC HD7 (Full HD - file extension .TOD) -> MPEG Streamclip conversion to QT Movie (using AIC, at a resolution of 1920 x 1080 (HD 1080i) -> iMovie editing -> ????
I want to be ale to preserve my edited movies in HD, but compressed somehow. The conversion to AIC really takes a lot of space... I have no intentions in keeping the raw video once the movie is completed. I do have QuickTime Pro.
My specific question is: what is the best codec and options that I need to put in order to preserve my finished movie in HD, but compressing enough, so the file size is not outrageous? I am concerned about quality, but I want to keep things in perspective... These are family, home videos. It is the same as for tunes, a 128 or 192 bit MP3 is good enough.
Cheers!

The choice of quality is pretty much down to you. What you really need to be asking yourself is how you will view your finished movies. Currently there are not many options for getting your movies to your tv and your delivery method may well dictate your workflow. I view all my movies on an tv so h264 960 x 540 @ around 5 Mbps does me fine, oddly enough I see no difference between these movies and those I've made at 720p and 8 Mbps.
On lower end macs im08 appears to reduce resolution to 960 x 540 and throw away an interlace field before reconverting to higher specs, so it may be that 960 x 540 is as good as you are going to get. If you have a high end mac and want to stick with 1080i, I'd be going for no more than 15 Mbps.
But hey what's good for me isn't necessarily good for you and I'd suggest you experiment and choose your own optimal settings.

How to make hovering over menu buttons like history, bookmarks and options, open thier expanded menu without hovering over the arrow next to them?

I'm at the tail-end of the "fix the newest update" and the last thing i wanna do before i head out the door is make it so that when i open the menu and hover over the things like history bookmarks and options, that their sub menus open when my mouse is hovering over the words or the arrows. right now the sub menus only open when i hover over the arrows.
I wanna make the words and their arrows a single button with the functional purpose of both.
Thank you in advanced for your time.

Are you using the Classic Theme Restorer extension?
*https://addons.mozilla.org/firefox/addon/classicthemerestorer/
That is one of the things that I noticed as well when using this extension.<br />
Maybe contact its developer to see if this behavior can be changed.

Does the labview 8.5 project have a search and replace option that appies to all vi's in the project?

In 8.2, the only thing the project has to let you search for a vi is "Find vi's on disk", which is redundant since I can do that in windows explorer. What I want is a way to search for vi's in my application the way the search and replace function works, except I want it to apply to all vi's in a project instead of just the vi's currently loaded in memory. Do we have this in 8.5?
-Devin
I got 99 problems but 8.6 ain't one.

I'll give an example of what I was trying to do yesterday in 8.2. I tried to build a source distribution of a large instrument driver. Since its an instrument driver there is no single top-level vi that contains all vi's - there are different categories of vi's to do different functions on my instrument. When I'm doing the source distribution I have to do it in several stages since 8.2 doesn't do source distributions right - but thats not really what this post is about. Anyway, every time I do the distribution I get an error saying CnvrtArrayIntoBitPattern.vi is password protected (and another engineer wrote it and I don't have the password). So the build fails. Now I don't know the password, I'll find it out later, but I at least want to know where in the hierarchy this vi is even being called. I don't know where it is on disk, I don't know what is calling it, it isn't in the project explicitly, it's a dependency.
If I had a top-level vi that loaded everything, I could just do a search and replace on that vi and find exactly where it is being called in seconds. But since I am in a project and have no idea where to start looking, there is no way I can find this vi. Ideally, in 8.5 there would be a search and replace menu option that searches all vi's in a project to find any calls to this vi. I want to look for all instances of a vi in my project. It sounds like you still can't really do that in 8.5.
What I ended up doing is writing a vi that opens all vi's in a folder hierarchy on disk. I don't know where this vi is, but all vi's in my project are in the same root folder. So I run my program to open every single project vi. Then since I know every single vi is open and loaded simultaneously I used the search and replace function on one of them to find all instances of CnvrtArrayIntoBitPattern.vi. But that is a painstaking process to create a simple search function.
I think NI is maybe misunderstanding how people are actually using a project. Not every vi that is being called is going to be explicitly listed in the project. (Its this same issue that makes source distributions impossible in 8.2 - you can't target dependencies to a support library so every dependency has to be explicitly listed in the project - which is virtually impossible because they are all in different locations and there are hundreds.) Most people have lots of general purpose vi's they use in many different projects, and they are buried down in code so we aren't even sure where they are all being used. The new searches you mention assume you already know where the low-level function is and you are looking for their callers. But sometimes you don't even know where the low level function is. What if its an NI directory function? For example, "resample waveform.vi" is an NI function that changed its defaults in 8.2 which meant we had to find every single place we used it and wire "open-interval?" to a constant instead of depending on the default value. Its in an NI library somewhere and is never listed as a project vi. So when I needed to find every place through every project that I used this vi, I couldn't do it through the project manager because there is no search function. To be practical I add the project-specific vi's to the project, and maybe a couple support directories, but there will always be lots of vi's as dependencies. But every now and then I'm still going to want to search for one of these vi's. So in 8.5 there is there still no way to search for vi's that aren't explicitly listed in the project?
-Devin
I got 99 problems but 8.6 ain't one.

DB Copy (MSSQL) between two SAP systems with different level and Components

Hi,
we have a SAP system release mysap 2004 SR1 and for "the upgrade project to SAP ECC 6.0 " we installed a new mysap 2004 in a new hardware (sap03) where we have also solution manager running. The new installed Mysap 2004 SR1 is alos running fine in the new hardware.
Now we would like to do DB copy from the old system (sap02) to the the new system sap03 and then we will do the upgrade to SAP ECC 6.0.
After I compared the two systems I have following questions:
1) there are 4 Software Components which are not in the new system (sap03). This are:
PI
FIN_BLERP
BP_INSTRASS
Is this necesary for the DB copy or we do not need this to be able to do the DB copy?
2) The Software Components Level is not the same. Should we have the same level to do the DB Copy?
Thanks in advance
Best regards
HanseAtik

Hi Juan, hi Clas,
just to be clear and to not stuck on the the way:
The systems are as follow:
1) the source system:
                     - Windows Server 2003,
                     - MSSQL Server 2005 with 32 bit.
                     - Mysap 2004 SR1
2) Target system:
                   - Windows Server 2003
                   - MSSQL Server 2005, with 64 bit.
                   - Mysap 2004 SR1 (with less Support package level and no PI, FIN_Basis, BP_BLERP and BP_INTASS coponents)
I hope this will work. could you post the link the DB Copy guide we are talking about?
By this way we will be sure that we are talking about the same DB Copy. Otherwise any mistake in this step will cost more work and time.
Thanks in advance
Best regards
HanseAtik

Receiving Error : Please set the Receivables system options for this operating unit and ensure that the MO: Operating Unit profile option is correctly set with an operating unit that is set up in Receivables. while trying to create a new Customer.

Hi All,
We have set up a new Operating Unit in Oracle Apps. Now when I am trying to create a new Customer in that Operating Unit, I am receiving following error:
ERROR MESSAGE:-Please set the Receivables system options for this operating unit and ensure that the MO: Operating Unit profile option is correctly set with an operating unit that is set up in Receivables.
We do have MO: Operating Unit and MO: Default Operating Unit set properly at Responsibility level for the Responsibility through which I am accessing this form.
Your help is appreciated!
Thanks in advance,
SKA

You can refer this thread and check your MO operating unit is set or not https://community.oracle.com/message/3937028 thanks

Custom program for availability check and update for existing sale order at Item level(VA02)

Hi,
I came to know Bapi_Saleorder_Simulate can be used for availability check and update an existing sale order.but there is no sample program explaining the process.I have tried this by passing parameters ORDER_HEADER_IN , ORDER_ITEMS_IN ,ORDER_PARTNERS and ORDER_SCHEDULE_EX(for getting details),also i have assigned the sale document number ,custom document type(ZSO) in ORDER_HEADER_IN . while executing the BAPI I am getting the error external number range is not assigned for the document type ZSO . I am confused on seeing this error. It is possible to do availability check for existing sale order using this BAPI. Please explain how to achieve this.It will be really helpful if it is expalained with an example.
Regards,
Shanmuga

Hello, I think you may have been misinformed about this BAPI updating a sales order at item level. As far as I understand it this BAPI can be used to simulate the creation of a sales order which obviously would include and ATP check. This is why it is giving the error because it is simulating creation but you are entering a value in a field that should be automatically generated (i.e. the sales order number). For change the sales order at item level have you looked at BAPI_SALESORDER_CHANGE? I pretty sure this BAPI both updates sales order (header or item level) and can do an ATP first.
Points are always welcome if you feel an answer has been helpful.

I'm using Mail 7.3 but can't find a "Block Sender" option, as exists in Outlook, as a way to block spam and unsolicited advertising. thanks.

I'm using Mail 7.3 but can't find a "Block Senders" option - as exists in Outlook - as a way to prevent repeated spam and advertising landing in my Inbox. Anyone have a solution for this? I've had a look at the Message Rules option but that doesn't seem to offer a fix. Thanks

You should be able to manage the problem with Rules, if you are happy to just delete the emails without you ever seeing them.
In Mail>Preferences>Rules, create a new rule with these options:
Description: Give a name to the Rule, such as Delete or Block Sender
On the line started 'If' choose 'Any' from the drop down menu and on the next line select 'From' and 'Contains', and then input the email address of the unwanted sender
Under 'Perform the following actions' choose 'Delete'.
As other senders you want to block send you unwanted emails you can add them to the rule by clicking the '+' sign against the line you added the email, if you have an email from that sender on screen when you edit the rule - they should appear there automatically.

Where is sign when you call international number, but first you call local number and after connect open keyboard and see that sign doesn't exist only 0

Where is sign when you call international number, but first you call local number and after connect open keyboard and see that sign doesn't exist only 0

No that is not work. Try to call some number and when is connect click on keyboard and you can see that sign "+" doesn't exist.
So I use local number, when I'm connect I have option to call international number but like "+3193675xxxx" how I can put?
Before on iOS 6 I do it.

Option that SAP starts automaticly after power loss

I am using an windows/sql ECC 6.0 server. I would like option that SAP starts automaticly after power loss. Is it possible and how?

Hi
I think this not possible.
Thanks
Pankaj Kumar

When I sign in to the Adobe Reader XI (which is the only option that I have to open a pdf document, I will sign in to the Adobe ID sign-in page. After I do this, the "Convert To" box goes "gray" and I am unable to convert the document I have selected. It

When I sign in to the Adobe Reader XI (which is the only option that I have to open a pdf document, I will sign in to the Adobe ID sign-in page. After I do this, the "Convert To" box goes "gray" and I am unable to convert the document I have selected. It was working great for the first week that I used it, but now it doesn't give me the converting option. I am very frustrated as I have done nothing to change anything, and I was thinking this was so great...now I am just pulling out my hair and do not have the option of calling anyone since no phone numbers are listed. I am VERY busy and do not have time to sit and wait over a half an hour to "chat", which I tried to do yesterday. All I want to do is very simply, convert pdfs to Word. I have paid for this and am not getting any help. I am not very savvy when it comes to Adobe this program and Adobe that program...I feel I am being scammed as I do not get simple answers for something that appeared was going to be simple. You can't even call customer service to talk to someone live to help walk you through.

Hello Kathie,
Sorry for the inconvenience that has caused to you.
Please let me know if you have tried converting any other PDF to word with Reader.
Alos, please sign up at "https://cloud.acrobat.com/" using your Adobe ID credentials. Click on 'ExportPDF' tab and upload the PDF that you want to convert to Word.
Let me know if this converts fine.
Hope to hear from you.
regards,
Anubha

How to upload data from excel to SAP and options to be used

How to upload data from excel to SAP and options to be used
thank you,
Regards,
Jagrut Bharatkumar shukla

Hi Jagrut,
You can use gui_upload.
chk the sample program mentioned below.
REPORT ZFTP .
DATA: BEGIN OF I_FILE OCCURS 0,
DATA(2000) TYPE C,
END OF I_FILE.
DATA: BEGIN OF I_FILE2 OCCURS 0,
DATA(2000) TYPE C,
END OF I_FILE2.
DATA: W_COUNT TYPE I.
PARAMETERS: P_FILEN TYPE STRING,
P_FILE2 TYPE STRING,
P_NUM(4) TYPE N..
AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_FILEN.
PERFORM F_FILE_GET USING P_FILEN TEXT-G01.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_FILE2.
PERFORM F_FILE_GET USING P_FILE2 TEXT-G01.
START-OF-SELECTION.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
filename = P_FILEN
FILETYPE = 'ASC'
HAS_FIELD_SEPARATOR = 'X'
HEADER_LENGTH = 0
READ_BY_LINE = 'X'
DAT_MODE = ' '
CODEPAGE = ' '
IGNORE_CERR = ABAP_TRUE
REPLACEMENT = '#'
CHECK_BOM = ' '
VIRUS_SCAN_PROFILE =
NO_AUTH_CHECK = ' '
IMPORTING
FILELENGTH =
HEADER =
tables
data_tab = I_FILE
IF SY-SUBRC <> 0.
MESSAGE E024(Z1).
ENDIF.
LOOP AT I_FILE.
W_COUNT = W_COUNT + 1.
IF NOT W_COUNT > P_NUM.
MOVE I_FILE TO I_FILE2.
APPEND I_FILE2.
ENDIF.
ENDLOOP.
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
BIN_FILESIZE =
filename = P_FILE2
FILETYPE = 'ASC'
APPEND = ' '
WRITE_FIELD_SEPARATOR = 'X'
HEADER = '00'
TRUNC_TRAILING_BLANKS = ' '
WRITE_LF = 'X'
COL_SELECT = ' '
COL_SELECT_MASK = ' '
DAT_MODE = ' '
CONFIRM_OVERWRITE = ' '
NO_AUTH_CHECK = ' '
CODEPAGE = ' '
IGNORE_CERR = ABAP_TRUE
REPLACEMENT = '#'
WRITE_BOM = ' '
TRUNC_TRAILING_BLANKS_EOL = 'X'
WK1_N_FORMAT = ' '
WK1_N_SIZE = ' '
WK1_T_FORMAT = ' '
WK1_T_SIZE = ' '
IMPORTING
FILELENGTH =
tables
data_tab = I_FILE2
FIELDNAMES =
*& Form F_FILE_GET
text
-->P_P_FILEN text
-->P_TEXT_G01 text
FORM F_FILE_GET USING L_FILENA L_TEXT.
CALL FUNCTION 'WS_FILENAME_GET'
EXPORTING
DEF_FILENAME = ' '
DEF_PATH = ' '
MASK = ',.,*.TXT.'
MODE = 'O'
TITLE = L_TEXT
IMPORTING
FILENAME = L_FILENA
rc =
EXCEPTIONS
INV_WINSYS = 1
NO_BATCH = 2
SELECTION_CANCEL = 3
SELECTION_ERROR = 4
OTHERS = 5
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Reward if helpful.
Regards,
Harini.S

Levels and options that exist in SAP

Similar Messages

Maybe you are looking for