Levels and sound quality

Hi
I have one track in a project which needs taking down quite a bit because it is clipping. Hence I need to take down all of the other tracks by the same amount. Just wondering: will the sound quality of the other tracks diminish in any way by being taken down? Put another way, is there any sound quality advantage in having a track at a higher level than at a lower level?

See also:
http://discussions.apple.com/thread.jspa?threadID=2114225&tstart=50
+Excellent comprehensive explanation by Bee Jay about the practical and theoretical ins and outs and do's and don'ts of 24 bit recording and 32 point floating point mixing.+

Similar Messages

  • AVAudioRecorder data usage and sound quality

    Witch is the best setting to the right mix of file size(data usage) and sound quality(ability to hear the conversation) when we work with AVAudioRecorder.
    Thanks
    Willy

    AntonBecker wrote:
    Alternatively, I can avoid the overage fees by agreeing to change my plan -- increase my monthly allowance -- but I have to pay the difference for all of the months that have already gone by all the way back to the beginning of my contract.  In other words, I have to pay for additional GBs for months that are in the past and for which I have no possible way to actually use that data allowance. This is NOT TRUE. You can have the change backdated to the BEGINNING of your CURRENT billing cycle but it WILL NOT go further back than that.
    I must say, that as a business model for raking in un-earned revenue, it's pretty impressive.  As a customer, though, I'm not terribly impressed.
    Does anyone else feel that these practices are just a wee bit unfair, to put it mildly?
    I would think that the following would be fair business practices:
    (1) If I don't use some GB data allowance, for which I've already paid, then that allowance should roll into the next month OR; Verizon doesn't have roll over minutes and they most likely will not have roll over data.
    (2) I should get a refund for data allowance that I don't use. Should you ALSO get a refund for unused minutes while you are at it? I don't watch all of the channels for which my cable company charges me. I would prefer a refund for THOSE before I get a refund for minutes/data from Verizon. I would make a considerably larger refund with that.
    (3) Alternatively, since Verizon believes it is OK to charge extremely inflated overage fees, then I feel it's only fair that they refund to me, at that inflated rate, for GBs that I don't use in any given month.
    How do the rest of you feel? I feel you should most likely look for a provider which better fits your view on how they should price their service. Good luck.
    Sincerely frustrated,
    Anton

  • Rebuilding library after hard drive crash AND sound quality of iPod files?

    Hi all,
    I had a hard drive crash and hadn't done a back-up in awhile. My iPod was up-to-date though. I used third-party software to grab the music off the iPod. So now I a good portion of my library back up to another hard drive AND the entire library pulled off my iPod. Should I just direct iTunes to the files I pulled off the iPod or direct it to the backup and add the missing files from my iPod files? Clear as mud?
    Also what will be the sound quality of the files I pulled from the iPod?

    If you copied the files from the iPod to a folder on your computer then open iTunes and go to File>Add Folder to library and add the songs back into iTunes (or simply drag the folder from it's location to the iTunes Source pane, - the long pane on the left. They should sound fine since they are simply copies of the originals. Before you add them check your iTunes preferences, go to Edit>Preferences>Advanced and make sure the boc "Copt files to iTunes Music folder when adding to library" is checked.

  • Fiddling with volume slider and sound quality

    In an attempt to bypass the infamous volume cap that plagues iPods sold in the EU, in the past I fiddled with the volume slider of many of my MP3 tracks, either directly or via third party applications (such as euPod). Afterwards I have changed my mind and reset the slider.
    Later on, I have read a few sources claiming that the above procedure would cause a permanent modification of the MP3 file and/or affect sound quality.
    I am somewhat puzzled by such claims... Am I really better off re-ripping all those tracks? Can anyone point me towards an undisputed “truth” on this matter?

    The third one is a hardware issue: The earbuds jack
    is very loose. Apparently, the iPod automatically
    pauses playback when the headphones are disconnected.
    Hence, I only have to wiggle the connector a bit and
    the nano stops playing. This really would be annoying
    if I were to go jogging with my iPod ...
    hmmm.. that happens to my ipod too and i only got it for christmas. so i was a bit gentle with it.so hence it comes out very easily.
    but whilst reading all the replys i decided to be harsher to my ipod and just push my earbuds in all the way..it worked!! that might be the same for u or i might have just been a bit too forgetfull and thought that my ipod was delicate coz its like.. so preety:)
    lol im in love with my ipod ..
    dont know if this helps..hope it does..
      Windows XP  

  • How to improve speakers and sound quality on Satellite C850-1GL

    just bought a Toshiba C850-1GL, very happy with it, with the exception of the sound quality, any suggestions on how this can be improved before I go and buy some external speakers...?

    As far as I know you cannot do much about that. This notebook has standard stereo speakers and not high quality Harman/kardon like some other models so if you want to have good and brilliant sound you need external speakers.

  • Speakers and Sound quality?

    close to buying the 13.3" mba
    from the photos i can't see where the speakers are located?
    and compared to say the latest mbp 15", how does the sound quality compare?
    anybody can help here?

    ashhast wrote:
    close to buying the 13.3" mba
    from the photos i can't see where the speakers are located?
    and compared to say the latest mbp 15", how does the sound quality compare?
    anybody can help here?
    Speakers are located under the keyboard, two of them for stereo output. Sound quality is pretty close to MBP. I HAD the i7 MBP, just sold it!

  • Fluctuating volume and sound quality?

    Windows 7.  HP Pavilion Entertainment PC.  Bose speaker system.  Sound seems fine through the iPod Nano and Bose speakers, but fluctuates and seems weirdly compressed through iTunes on the laptop.  Don't remember it ever being that way.  New version of iTunes to blame?  Virus?

    Hello there,
    It sounds like your iTunes volume not functioning correctly when playing through your speakers, but your iPod Nano seems to work just fine with it. I would first check the equalizer to see if it is set to something unexpected in iTunes with this article and verify that your audio is set up correctly:
    iTunes 11 for Windows: Adjust the sound quality
    http://support.apple.com/kb/PH12334
    If the issue persists or that is not the cause of it, I would next use the folliwng to help troubleshoot audio playback in iTunes on Windows:
    iTunes and QuickTime for Windows: Audio does not play or plays incorrectly
    http://support.apple.com/kb/ts1362
    Thank you for using Apple Support Communities.
    Cheers,
    Sterling

  • Recording LPs with smart recorder and sound quality off.....

    Hi,
    I have X-Fi Extreme music card on my PC and trying to record some LPs with SmartRecorder. These are classical LPs and I find that when played back, the orchestra (violins, choir, etc) sound like this was recorded in a tin can. Any ideas why this would be? I connected all my cables accordingly and?am still?getting this problem.

    Which type of connection are you using there?
    Do you have preamp stage w/ RIAA there before soundcard (you have connected the PC into your stereo system just the way
    like you connect a casette recorder or you have connected your turntable w/ RIAA preamp directly into soundcard) or
    have you connected your turntable (w/o RIAA + preamp) directly into soundcard?
    If you're using the latter method, you need to have EQ w/ RIAA compensation added into signal (you need some ASIO/VST
    capable recording software which allows you add FXs into signal (Hermann Seib's VSTHost) and an EQ capable for
    compensation curve +20dB (20Hz) - -20 dB (20 kHz) (ddmf:IIEQ). It's possible that you
    can't get levels set high enough w/o adding some gain plug-in into signal path. You can use Sonalksis FreeG VST (stereo)
    for this (in VSTHost, place (route) the FreeG either after or before the EQ (try which works better for you)).
    Also, check if the recording source is set correctly (w/ "What U Hear" option you get all added effects added
    into signal (EAX, CMSS) so it's best to set input as Line-In) and turn all effects OFF.
    If you record into lossy format as mp3 or wma, check that the bitrate is set high enough (I suggest you use bitrates
    256 - 320). Also, do not use addons like Chrystalizer, etc..
    If needed some software, http://www.head-fi.org/forums/showpost.php?p=282263&postcount=7
    jutapaMessage Edited by jutapa on 05-08-200704:02 PM

  • Hands free blue tooth not connecting and sound quality poor

    I recently upgraded from a iphone 3g to the iphone 4. The 4 does not automatically connect to the hands free blue tooth in my Hyundai. I have to turn the phone off and then back on for the hands free in the car to connect to phone. On my 3g I turned on the car and it automatically went to the hands free speakers. Also people tell me they are having trouble hearing me, saying I sound very far away. I never had these problems on the 3g.
    Does anyone have any suggestions? This is frustrating because I am constantly in and out of my car and getting many calls from clients and staff while on the road.

    I installed IOS4.1 and the bluetooth handsfree connects about 20% of the time without having to power off the phone and turning it back on. I deleted the phone on the handsfree and re-pared the phone.
    Something is still not right with the iphone4 and bluetooth connection.

  • Please test the start speed and viewing and sound quality of this video

    hi to you all,
    After playing around all week with quicktime i need some feedback on this video, i need to know how good or stress free getting to view and listen to this video was for you.
    please give marks out of 10
    http://web.mac.com/dvjfitz1/iWeb/dvj%20fitz/dvj%20mix.html
    thanks in advance
    dvj fitz
    imac g5 Mac OS X (10.4.4) 20" isight 512mb ram 250gb hd
    imac g5 Mac OS X (10.4.4) 20" isight 512mb ram 250gb hd
    imac g5   Mac OS X (10.4.4)   20" isight 512mb ram 250gb hd

    thanks for the feedback so far.
    its been very helpful.
    and to my fellow leicesterfarian, new parks thats where i went to school a very very long time ago.
    peace x
    imac g5 Mac OS X (10.4.4) 20" isight 512mb ram 250gb hd

  • Sound quality when burning an iMovie to disc

    I just got iLife 9 and made a video using iMovie. The picture and sound quality on my computer are excellent; but when I burned the movie to a disc using iDVD the pictures remained high quality but the sound was poor. Any idea what might have caused the problem and what I can do to get better sound quality? Any help would be much appreciated.

    Problem found !
    Karls answer's helped me to findout the issue.
    Nevertheless, this wasn't the bug.
    When playing the movie in iMovie HD, sound rendering is not correct. When you burn your DVD, sound track is calculated to mix every sound tracks according to each sound volume curve defined in iMovie.
    If you see a dot at the beginning of a sound track this mean that the DVD sound rendering will be incorrect.
    Clean the and make sure that, when you select a sound object, you can change its volume by adjusting it, not manually, but using the general volume cursor. If not, you have a problem. Remake a perfect flat volume curve before adjusting it again.

  • Terrible sound quality on my Satellite C50-AOG1

    My speakers sound really tinny and the worst I've heard since I had a transistor radio in 1970. I went into the drivers download are but was not able to find anything to improve them. Using 8.1 doesn't help because I'm not sure where you find everything.
    Any ideas?
    Anyone else found a shortcoming and solved it or just has a good idea please?

    Hi
    Similar thread you can read here .
    Problem is that many notebooks have small stereo speakers only and sound quality is unfortunately not so good.

  • Using leopard sound quality in itunes suddenly diminished

    Hi All
    Anyone else had this problem - I installed Leopard the other day - no worries all good up to now - today started listening to some music and sound quality is awful - podcasts, imports from cd collections, downloads from internet all affected - all sounds like bitrate has fallen down to 32 instead of 256 - any ideas what it might be or what to do????

    Hello,
    I too have noticed poor audio quality from itunes after upgrading to OS 10.5. Even though most of my songs on iTunes are Apple Lossless Format, it still sounds like it is very low bitrate...So much so that I can't listen to most things. My listening is done via headphones or multimedia speakers thru the audio output on a MacBook Pro 2.16 GHz. Has anyone found a solution to this problem? Interestingly enough, I did notice that the same songs played on Quicktime sounds a lot better than that on itunes. I've tried everything that I can think of to rectify the problem. Checked all my connections, checked eq and other audio features on iTunes, I even tried going into App/Utilities/AudioMidi application to try the aforementioned solution without any luck.
    Please, please, please, if anyone has a solution or any idea how to solve this problem, let us know. I cannot live without my iTunes, I use it to study and I have finals coming up next week...and no iPod...
    Thank you,
    Desperate student seeking help

  • Why such sorry sound quality on iTunes? On some of my purchases the sound level is suppressed on the audio. On others the volume is so low that if I have it set for another song and a new one starts I have to increase the volume to hear it.

    Why such sorry sound quality on iTunes? On some of my purchases the sound level is suppressed on the audio. On others the volume is so low that if I have it set for another song and a new one starts I have to increase the volume to hear it.
    There is so much distortion on some of the music I have to play it with QuickTime to get a "clean" track.
    What can be done to get a consistent volume level or is this another typical Apple product that you have to take what you get and be happy because it's not a Microsoft product?

    If that's the best you can do why don't you get on another forum?

  • Sound Level and Quality in Macbook Pro 2.33

    I recently bought a Macbook Pro 2.33 and I am disappointed with the sound level of the speakers which are not very loud at full volume and the the sound quality not as good as my old Compaq Presario. My old Compaq Presario is about 3 to 4 times louder than my MacBook Pro. Also the Compaq Presario uses JBL Pro speakers. I have not seen any info on Apples site with regard speaker types. I believe the forum needs to add a dedicated section to Audio in general. Yes, I know is a section for Logic and Garageband, but other users use different programs. Can any user please tell me about their audio experience with the MacBook Pro 2.33?

    I don't think the audio is that bad. Maybe it's better on the 17" version. I know that it's louder and sounds more clear than my Toshiba Satellite. I also use external speakers when I really want to get good volume but I think my internal speakers do a good job. I will say that at half volume I get hardly any sound coming out at all though.

Maybe you are looking for

  • Remaining capacity requirements scheduled for operation in Planned Order

    Hi all, I'm workig with planned orders, and I need the "Remaining capacity requirements scheduled for operation" data to list it in a Z Report, but I don't know how to get it. You can see the info in the "Detail Scheduling" of the planned order in MD

  • Delete Transaction Data from date to date

    Hi All, we want to delete transactional data from date to to date is there any way to delete data from date to todate? We are aware of following tcodes OBR1- Reset transaction data CXDL - Delete transaction data from ledger But there is no period/fro

  • X61 Tablet stops responding to pen

    Greetings, all! I have an X61 Tablet 7767-02U (call it X61 A) that is barely three weeks old.  Was working wonderfully until yesterday.  When in tablet mode, it will not respond to the stylus (pen) input.  Stylus from a second, identical X61 does not

  • REST url to get titles and description for all the lists in HOST WEB.

    What should be the REST url to get specific prperties for all the list in host web for SharePoint Hosted Apps.

  • Cannot email through Acrobat Reader (URGENT)

    I have this feature "Click to attach this pdf to a new email message" on the menu bar in Acrobat 9...but when I click on it it does not open a new outlook message like it does on my other PC OS - Windows 2003 Why could that be? Under Internet Options