"Levels" stopped functioning in CS3

I'm using PS CS3 on a Mac running OS 10.6.4. The adjustment sliders in "levels" within "Adjustments" have no effect on the image. Other functions under "Adjustments" seem to be working although I have checked just a few. Anyone have a solution or is this a compatibility issue between CS3 and OS 10.6.4?

The solution was simple. I just needed to checx the "preview" box in the "levels" menue so that the results of moving the sliders would be displayed. How or when it ever got un-checked, who knows.

Similar Messages

  • The keyboard and trackpad on MacBook Air (13-inch, Mid 2013) computers may stop functioning at the Personalize step when installing Windows 7 64bit

    The keyboard and trackpad on MacBook Air (13-inch, Mid 2013) computers may stop functioning at the Personalize step when installing Windows 7 64bit.

    1. Reset PRAM.  http://support.apple.com/kb/PH4405
    2. Reset SMC.     http://support.apple.com/kb/HT3964
        Choose the method for:
        "Resetting SMC on portables with a battery you should not remove on your own".
    If this does not help, contact Apple.

  • HT5055 Just updated to lion and my cctv access has stopped functioning all I get is a white screen in the middle of the control panel where the camera shots should be.  I think it is caused by JAVA but am confused as when i view on snow leopard it works 

    Just updated to lion and my cctv access has stopped functioning all I get is a white screen in the middle of the control panel where the camera shots should be.  I think it is caused by JAVA but am confused as when i view on snow leopard it works  can you help

    Open "Java Preferences" either from spotlight or your utilities folder...it's probably going to say you need to install a java runtime. Then just click install!

  • MacBook Pro battery had accumulated more than a 1000 charges, and stopped functioning unexpectedly. Went and got the battery replaced. Just saw that SMC Firmware 1.6 update deals with this. Possible to get my money back?

    MacBook Pro battery had accumulated more than a 1000 charges, and stopped functioning unexpectedly. Went and got the battery replaced. Just saw that SMC Firmware 1.6 update deals with this. Possible to get my money back?

    The firmware update corrects an error that may occur, however the techs would have checked the condition of the battery prior to installing a new one.  If the battery was questionable, the firmware update was really not too important.
    You can check the battery condition by going to the apple, left side of the menu bar, About This Mac, More Info, System Report, Hardware, Power and see what it says about Cycle Count, Condition, Capacity: Condition anything but Normal needs to be checked and may need to be replaced.
    The cycle count of 1,000 charge cycles is the typical life of a Lithium-Ion battery, the point at which the capacity drops to 80% of the as built capacity.

  • I found the solution to a Mavericks bug on the Mail program. How can I share it? Several of my mail boxes stopped functioning properly when I updated to Mavericks. After long hours, I discovered that if I change the name of the mailbox, the content works.

    I found the solution to a Mavericks bug on the Mail program. How can I share it? Several of my mail boxes stopped functioning properly when I updated to Mavericks. The title of the mails stored in the mailbox appear, but the content was unavailable.
    After 4 long hours at the phone with the Apple staff unable to help me, I discovered that if I change the name of the mailbox, the contents of the mails stored there become available.
    Please, make this solution available to other people!

    You have found the the way to share it.   Include your problem and its solution in a forum post in the Mavericks forums.   Then mark you own post with a green solved star.
    Note.  You won't get any points for that; points are only awarded where you mark someone else's post as either helpful or solved.

  • Connecting to new wireless internet makes macbook stop functioning?

    When i connect my mac book pro to wifi internet it stops functioning. When airport is switched off it works fine. Anybody know why?
    The strange thing is i recently moved and when i take the laptop back to my original home it connects to the wireless internet fine and the laptop works great. I only have an issue when i try to connect to the new wireless internet at my new place??

    Hi adamtreff!
    I have a couple of articles that can help you isolate this issue a little further. First, you will want to be sure you are using the correct settings for you Wi-Fi router. These are the recommended settings on your router for best compatibility with iOS and OS X devices:
    iOS and OS X: Recommended settings for Wi-Fi routers and access points
    http://support.apple.com/kb/HT4199
    Next, you will want to troubleshoot your Wi-Fi connectivity. There are some helpful troubleshooting steps located in this article:
    Wi-Fi: How to troubleshoot Wi-Fi connectivity
    http://support.apple.com/kb/HT4628
    Thanks for coming to the Apple Support Communities!
    Regards,
    Braden

  • HT2832 Help!  My fire wire  400 ports have stopped functioning, and my 800 is now having problems

    Help!  My fire wire  400 ports have stopped functioning, and my 800 is now having problems....I'm getting a protools message telling me there is a problem with my firewire.

    First, you have posted in the wrong area, this is for PPCs and you have an intel.
    Try repairing permissions and resetting the PRAM.
    Let us know how you made out.

  • Where in migration process does old server stop functioning as primary server?

    I am migrating from a SBS 2003 box to a new WS 2012 R2 Essentials box - following the instructions from 
    "Migrate from Previous Versions to Windows Server 2012 R2 Essentials or Windows Server Essentials Experience".   What I need to know is where in the process does
    the old server stop functioning as a server for my network.   What I mean by this is when in the migration process (when I add the new server as a replicate DC?  not until I demote the old server?) will any programs/databases on the old server no
    longer be available to client computers?  
    Thanks for any insight.

    Yeah, we need to agree on what is meant by "the server". In Windows, Server means many different things. Each time you move, a role or feature from the "old" to the "new" the old server ceases to function as "the server"
    for that role or feature. The basic functions of a Windows DC include Active Directory, 5 FSMO roles, file and print services, and application services to name just a few.
    So the answer to your question is more to do with what you mean by "server".  In particular, for the application role, you must move the app to the new server by whatever means the developer recommends.  At that point, regardless of whatever
    else is going on the old server is out of the picture for that application.
    Larry Struckmeyer[MVP] If your question is answered please mark the response as the answer so that others can benefit.

  • My IP4 on/off switch has stopped functioning.

    My On/Off switch has stopped functioning. No depression, no click and no response. Has anyone else had this problem and if so, did you solve it? How?

    You have a hardware failure.  Bring your phone into Apple for replacement.  If it's under warranty, it will be replaced free of charge.  If not, you will be charged an out of warranty replacement fee of $149.00

  • Preview 4.2 has stopped functioning.  How does one install a version of Preview that will operate with Snow Leopard?

    My version of Preview 4.2 had stopped functioning.  How do I install a later version compatible with Snow Leopard?

    Since Preview is part of the system, you can reinstall your OS using your install disks. It will automatically install the correct version. I have not been running Snow Leopard, so I cannot check on the correct version of Preview; however, how did it "stop functioning"? Exactly what happened?

  • Acrobat stops functioning halfway through PDF creation

    I have to convert a very large WORD document (a book, 680 pages including illustrations, tables, index etc.) to PDF. Let me begin by explaining that I've already done this in the past, using Acrobat Professional 5 and Office 2000 Professional; it took ages to create the PDF file, but I was able to do it. At that stage I actually had Acrobat 6, but since it blocked halfway through PDF creation, I went back to Acrobat 5 and managed to create my PDF file.
    I've recently had to revise the document in question, but I now have Office 2007, Acrobat Professional 8.1.2, and a new laptop (Acer Aspire 5105, AMD Turion 64x2, 2.0 GHz, 160GB HDD). I tried converting it to pDF yesterday, but once again found that the program blocked halfway through (while creating Tags; it gets up to 60%, and then just stops functioning). I thought this might have something to do with the sceensaver starting up, or else the automatic saving of the WORD document, but I don't think this is the case.
    Does anyone have any ideas as to what the problem might be, and how o solve it?
    Mark

    It should convert exactly as long as you have done the editing with the Adobe PDF printer selected. This is a WORD issue. The ability to do the conversion was my concern and tags are likely the issue for such a large document, particularly if you have a lot of graphics. Keep in mind that to create the PDF, a PS file is first created -- that is a format that is not very small in terms of storage and could be huge. Your TEMP folder is typically limited by windows and may need to be emptied to hold this file.
    Optimizing the graphics up front is also good. Using Mike's suggestion to find the problem graphic would be useful, but is hard to do with PDF Maker (I don't think you can select the pages with PDF Maker). Printing to the Adobe PDF printer will check the layout and also the ability to do the conversion. If the latter works, it is then a matter of determining what you need in PDF Maker.
    If you do not need the markup (or wish to add later), then you can save a lot of space by simply printing to the Adobe PDF printer. With PDF Maker, you likely need to go back and review the defaults.

  • TDMS Low level file functions and Saving Front Panel image

    Am using TDMS low level file functions to save while also plotting data in my data acquisition programme.  However, I also want to programmatically be saving the front panel image on every run of my data acquisition.  I have coded all other aspects, except the behavior of functionality of saving the front panel image on every successive runs of the application.  Unfortunately, I just have no idea on how to code this aspect on LabVIEW, and all effort to search for example codes on so far have not been successful.
    I would appreciate any useful hints or steps from anyone for me to follow, in order to accomplish this behavior, and that is being able to programmatically save my front panel images while using TDMS low level file functions in my File IO system of my application.
    Thanks in advance.

    Tebefia wrote:
    Am using TDMS low level file functions to save while also plotting data in my data acquisition programme.  However, I also want to programmatically be saving the front panel image on every run of my data acquisition.  I have coded all other aspects, except the behavior of functionality of saving the front panel image on every successive runs of the application.  Unfortunately, I just have no idea on how to code this aspect on LabVIEW, and all effort to search for example codes on so far have not been successful.
    I would appreciate any useful hints or steps from anyone for me to follow, in order to accomplish this behavior, and that is being able to programmatically save my front panel images while using TDMS low level file functions in my File IO system of my application.
    Thanks in advance.
    Did you see this link?
    CLA, LabVIEW Versions 2010-2013

  • Re CS5 Ruler tool has stopped functioning. How can I correct this problem?

    Re CS5 Ruler tool has stopped functioning. How can I correct this problem?

    First try re-setting the Ruler Tool from the tool's fly-out menu.
    If that doesn't do it, then trash and recreate Photoshop preferences.
    If you had at least indicated your platform, I could be more specific, but here it goes anyway:
    To re-create the preferences files for Photoshop, start the application while holding down Ctrl+Alt+Shift (Windows) or Command+Option+Shift (Mac OS). Then, click Yes to the message, "Delete the Adobe Photoshop Settings file?"
    For next time you post:
    Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers: 
    http://forums.adobe.com/thread/419981?tstart=0
    Thanks!

  • New version (2014.1) bug : stop() function won't work

    Hi everyone,
    I would like to know if someone else had this issue.
    I've set a symbol that has an animation into another symbol that is put in the Stage. ( Stage -> symbol_father -> Symbol_with_animation) .
    I want to make this animation start only when i press a button into the Symbol_father.
    The issue is, as soon as I run the Stage,  my animation will start regardeless i've insert every type of "stop()" function ( for example : sym.stopAll() into the stage, or sym.stop(0) into the start function of the symbol_with_animation, and so on...)
    Thanks for your time,
    greetings.

    There is no such bug AFAIK.
    I have created a composition @ Dropbox - NestedSymbols.rar as you described, and everything seems to be working fine.
         Preview in the browser and click the green box.
    Let me know if it helps, else share your composition  so that we can test.
    hth,
    Vivekuma

  • ColdFusion Developer stop functioning!

    Hello all,
    Yesterday, I installed ColdFusion Developer Edition and it
    was working fine for about a hour. Then, suddenly it completely
    stopped working. I know the code is correct because I uploaded my
    document to a remote server with ColdFusion support and everything
    worked correctly.
    All I'm doing is simply defining a variable with
    <cfset> and calling it with <cfoutput>, and for
    whatever reason the ColdFusion server is now it seems like the code
    is never even getting to the ColdFusion server because when I look
    at the "view > source" in internet explorer, the <cf> tags
    appear for the client to see.
    What might have caused ColdFusion to stop functioning all of
    a sudden? How can I get it working again? I have already tried
    uninstalling, and reinstalling, and installing the MX 7.2 update,
    and it still isn't working. Is there some way to reset everything
    within ColdFusion? I'm basically at a loss here, any help would be
    greatly appreciated.
    Thank you,
    Brian

    whooopsies! I figured out what I was doing wrong. Noob
    mistake -- rather than browsing to my files using
    http://localhost:portnumber/directory
    .... I was trying to just right click on my .cfm files on my hard
    drive and open them in my browser....
    C:\CFusionMX7\wwwroot\examples\variables_form.cfm -- in which case,
    obviously the browser didn't know to route the files to the port of
    the ColdFusion server, and thus wasn't compiling the code...

Maybe you are looking for