Lexar USB Key not working...

I have a Lexar USB 256 jumpdrive that recently just stopped working. When I plug it in it acts completely dead, it doesn't mount and the LED light stays completely dark (doesn't show up in disk utility). I've tried it on my iBook G4 (1.2 GHz, OS X 10.3.9), an iMac G5 (OS X 10.3.9), and a PowerMac Dual G5 (10.4.3) and it won't light up on any of them. It works completed fine with Windows machines (2000), OS 9 Macs (G3 blue and white, and G4 Purple machine) and on eMacs (OS X 10.3.9). I've tried reformatting on the Windows machines and on the eMacs and OS 9 machines that it would load up on, and that doesn't seem to make any difference.
I tried restarting the machines it won't load up on and resetting PRAM. Doesn't make any difference.
Has anybody run into this problem? Any suggestions
Chris

not answered

Similar Messages

  • Some USB keys not working on HP Elitebook 8770w

    Some USB keys (32GB) isn't recognised in my laptop. On other cemputers they just work properly. I tried install chipset and USB 3.0 drivers but it didn't help. What can I do?
    P.S. older (smaller) USB keys work OK.

    OK, I'm sure you've tried different USB ports on the notebook and no luck. Correct?
    Also, Try this . Go to your Device Manager and delete all of the USB ROOT HUBS. 
    After that restart the notebook and it will install them automatically. Try using the Drive again and let me know the outcome. 
    ROOT 
    THX

  • Windows 7 (Ent) Sp1 on server 2012 R2 HyperV, RFX USB redirection not working

    Hello, 
    I currently have  windows server 2012 R2 with HyperV installed. I have built two virtual machines. A windows 8.1 and Windows 7 sp1. Both are enterprise editions  
    For RemoteFX the hypervisor is using a Zotec GTX 760 GPU. It recognizes it and uses it to apply remoteFX adapter on my Windows 7 Sp1 VM. 
    As you are aware I do not need to use a GPU to enable RFX on my Windows 8.1 it can do this without the need of a GPU.    
    Using an RDP client( v8.1)  I can connect to my Windows 8.1 VM with a USB headset,memory Key or a printer and they all enumerate on the Virtual machine. The driver for each device installs 
    and I can use the device without any issues. 
    However this issue lies with the Windows 7 SP1 VM. I can connect to it via RDP( Same client)  but I cannot redirect any devices to it. I have installed the latest integration services available on the VM. I have ran all updates available.
    Because I have ran all updates the rdp version on the VM is running v8.1.
    Previous to installing the updates USBr still was not working
    I have enabled the following group polices under remote desktop services on the Windows 7 SP1 VM : 
    RDP 8.0 -- Enabled
    Configure RFX -- Enabled
    Is there a known issue with USB redirection not working on a Windows 7sp1 virtual machine hosted on server 2012 Hypervisor ??
    Many Thanks 
    Brian 

    Hi,
    According to the log above, I found that we run the script on both Server6 and Server7. Errors as below:
    Server6: Conversion is not supported in restricted language mode or a Data section.
    Server7: Couldn't figure out valid servers from the specified destination scope. Check your parameters and try again.
    Since we can only run the RollAlternateserviceAccountPassword.ps1 Script on CAS server, the script not works well if Server6 is MBX server.
    For Server7, based on the error message, it seems you still have no right to run the script/cmdlet.
    Please add your account to Organization Management Role group(ADUC->domain.com->Microsoft Exchange Security Groups) to test if possible.
    By the way, from Technet:
    You need to be assigned permissions before you can perform this procedure. To see what permissions you need, see the "Client Access Security" entry in the Client Access Permissions topic.
    Client Access Permissions
    http://technet.microsoft.com/en-us/library/dd638131.aspx
    Feel free to contact me if there is any problem.
    Thanks
    Mavis
    If you have feedback for TechNet Subscriber Support, contact
    [email protected]
    Mavis Huang
    TechNet Community Support

  • USB Stick not Working in MBP

    I have a 17" MacBook Pro running the latest OS X, and I have a Lacie USB key. When I plug in the USB key, my MBP does not recognize it at all. Nothing. However, when I plug the same USB key into my iMac (running the save version of OS X) it works just fine. The USB key also works perfectly on my Windows 7 PC at work. Other USB devices (hard drives, etc.) DO work on my MacBook Pro, so it's not as if the USB slot is busted. I've tried both slots to no avail.
    Does anyone have any idea why this would be happening, or what I can do to try and fix it? Thanks!

    Hamster Huey wrote:
    I have a 17" MacBook Pro running the latest OS X, and I have a Lacie USB key. When I plug in the USB key, my MBP does not recognize it at all. Nothing. However, when I plug the same USB key into my iMac (running the save version of OS X) it works just fine. The USB key also works perfectly on my Windows 7 PC at work. Other USB devices (hard drives, etc.) DO work on my MacBook Pro, so it's not as if the USB slot is busted. I've tried both slots to no avail.
    Does anyone have any idea why this would be happening, or what I can do to try and fix it? Thanks!
    Have you tried other USB devices to confirm it's the 17" MBP?
    If you can confirm it you should then backup your data and reinstall OS X by c booting off the installer disk.
    You can also shutdown the computer, hold the D key and reboot, hold the D key for quite some time and you might enter the hardware tester.
    If you reinstalled OS X and your problems continue, you should make a warranty/service call with Apple.
    Good luck

  • Command, option, ctrl, fn keys not working

    thanks to a visiting dog who got tangled up the power adapter my laptop ended up on the floor, wide open with the keyboard popped out. I have inspected the connector cable and it looks OK to the naked eye. I disconnected the keyboard cable and re-connected.
    When using an external USB keyboard all keys function normally. When using the built-in keyboard the only keys not working are the command, option, ctrl and fn keys. I have restored modifier keys to default (I had never changed them) but this did not help. I also toggled the "use F1-F12 to control..." option in the keyboard preferences to no avail and have restored keyboard shortcuts to no avail.
    Is my keyboard shot? Is the a pref file I might delete?

    Hi, Mel. If the external keyboard works properly, I'm afraid you have to figure your built-in KB has been dogged to death. I hope the pet owner will do the right thing by you. I also hope the KB is all that was damaged. How are your adapter cord, plug, and DC-In port? Does your battery still charge OK?
    Whenever anything visits my house that's active, inattentive, and built low to the ground, my Powerbook runs on battery power only. I haven't seen one yet, but the new magnetically-connected, easily- and harmlessly-detached MacBook Pro AC adapters sound like a superb idea to me. Too bad our PBs can't use 'em.

  • Wired keyboard-number pad&right arrow keys not working-serial # help!

    Hello to whomever reads/replies -
    I have a wired keyboard for my iMac(it's not the aluminum imac, but the version before it with the keyboard and mouse that came with it). I got this keyboard June 2007 after the original keyboard sent to me had problems with it with some keys not working properly. And now about a week ago my right arrow key and the zero, decimal point, one, two, three and enter button on the keypad stopped working out of the blue. One night they worked and the next they didn't with nothing being done different, nor was the keyboard stored differently.
    I've cleaned the keyboard inside and out twice and tried pushing the little squishy thing under the keys when you pop them off and there's no response with those being pushed either so something's got to be wrong with the keyboard itself.
    Also, when I go online to look up the warrenty on this keyboard, #1 i can't find where it tells me where the serial number on the **** WIRED keyboard is, just gives me where i can find it on the WIRELESS keyboards. Ugh. So I looked under my keyboard and punched in the numbers and letters that i found on a little silver plate just below where the wire and USB ports are in the top of the keyboard and I get an 'invalid serial number' error message.
    So.. could anyone help me with these problems? I'd really rather not call tech support since it took me over two hours to explain to the man that I spoke with last year about my other keyboard and I just don't have the time! Thanks in advance!
    Sharon

    Hello sharon:
    Welcome to Apple discussions.
    Run, don't walk to the phone. Call Applecare and indicate you have a warranty problem. The KB is (or will be shortly) out of warranty. It may take you some time, but it may save you some money in the long run.
    Incidentally, it appears to me that your KB is, indeed, broken.
    Barry

  • T410 both CRTL keys not working

    Hello All,
    This is driving me nuts.  All of the sudden the CTRL keys (both left and right) do not work on my T410.  I thought it was a virus (I had a torjan) so I wiped the HD and did a clean install of Win7 pro 32 bit.  Problem persists.  
    I can attach an USB keyboard and the CTRL keys work on USB keyboard.  I can go into BIOS and toggle FN and CTRL keys, then the FN key works as a CTRL key just fine, but the CTRL do not as FN.
    I have two kids age 5 and 9 and they might have messed with something.  Any suggestions are appreciated.  I cannot find the solutions.  I find it very strange that both right and left CTRL keys would mechanically fail at the same time.
    Cheers,
    Mike - Toronto Canada

    @maxillo,
    Try alt + ctrl + fn and see if it helps.
    http://en.kioskea.net/forum/affich-28177-control-keys-not-working-on-laptop
    Also try going to "Ease of access center" then "make keyboard easier to use" then see if any "sticky keys" or other modes are turned on.
    //JameZ
    Check out the Community Knowledge Base for hints and tips.
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
    X240 | 8GB RAM | 512GB Samsung SSD

  • My laptop touchpad left mouse key not working

    I have a Elitebook 8440p with windows 7 professional.The touchpad left mouse key not working ,but right mouse key works well.my driver is  synaptics 14.0.10 090ct09 and the touchpad name is synapticsTouchPadV7.2.
    thanks in advance.
    wy

    i had the same problem. what solved this for me was to simply go to device manager and under mice and other pointing devices uninstall the touchpad, i had a usb mouse handy just in case i needed it, but then i restarted the laptop and it auto reinstalled touchpad for me and then all options worked on startup.

  • After installing iPhone Configutilities in my Mac, Personal Hotspot using USB is not working! Please help, I am using 10.7 Lion OS

    After installing iPhone Configutilities in my Mac, Personal Hotspot using USB is not working! Please help, I am using 10.7 Lion OS

    Did you talk to your carrier?

  • A s d f g keys not working on a wireless Apple keyboard for Imac

    a s d f g keys not working on a wireless Apple keyboard for Imac.
    When I type they on't work.
    *Exmple o complete entence.
    Plee help! Thi i very rutrtin. I on't wnt to ue cut n pte or ome letter.
    Thnk you in vnce.

    Make a Service appointment for the keyboard at your local AASP.
    Apple - Find Locations
    I'm not sure how old it is, but it is covered for 1 full year as long as it didn't take that 19 story dive.

  • Volume and brightness keys not working with new keyboard on imac

    I just purchased a new wired keyboard for imac and brightness and volume control keys not working . i have tried adjusting keyboard settings. I have software version 10.5.8. Do I need to upgrade software. Thank you for any help.

    Do you have "Automatically Adjust Brightness" check box ticked in System Preferences > Displays > Display ? If so, you can't manually adjust brightness.

  • Dual-Boot; Restart and boot other o/s USB devices not working

    I have issue with my msi z97-g43 mobo and Windows dual o/s PC.
    Booting with win-8.1, USB devices working very well.Restaring windows 8.1 have NOT any issue.
    After shutdown & start PC, choosing to boot windows 7 on bootmanager, USB devices not working in Win-7.
    System no hang or occur any error/BSOD message.All startup programs run as normal.
    I tried to re-plug usb devices but notting happens...  Still not working
    But after the win-8.1 shutdown, if i switch off PSU power button, watting ~1 munute for discharge.
    After power up PC and boot with windows 7 all usb devices works normaly.
    I checked all internal connections. 2 times disassembly all hardware and re-built system, nothing changed.All windows updates and latest drivers installed.
    I'm sure other H/W is OK, but I thnik this mobo have a fault.

    Thank you for reply.My PC system specs:
    CPU:    Intel Pentium G3258 3.2ghz
    Board:    MSI Z97-G43 /Bios: Ver. V17.7
    MEM:    G.Skill Ripjaws 2x4gb DDR3-1600mhz cl9 1.5v F3-12800CL9-4GBRL
    VGA:    Sapphire AMD Redeon HD6670
    CASE:    Zalman z3 plus white (5x 120mm fan)
    PSU:    Thermaltake Litepower 500w (12v1+12v2=36amp)
    HDD-1:    Seagate 1TB ST1000DM003 /HDD-2: Seagate 2TB ST2000DM001
    COOLER:    Akasa 92mm PWM Blue Led
    OC:    CPU:Default /MEM: X.M.P mode=1600mhz 9-9-9-24-2t 1.5v
    O/S:    Win7 x64 PRO + Win8.1 x64 PRO (Genuine)
    All hdd's have MBR based partition table.Windows 7 & 8.1 installed in non-efi mode.In BIOS Boot sequence is setting up to non-efi Boot(system) drive as primary.
    Before I suspect maybe have a short circuit to pcb or similar thing cause this issue.I take out all parts outside the chassis, and ran this system on the antistatic bag and box.Nothing has been changed.
    I have Cooler Master Devastator(MB24 + MS2k) USB keyb+mouse set and tplink wn722n usb wireless dongle.
    I have one more pc,based on AMD 970+SB950 chipset mainboard and AMD CPU.I exchange all parts to this amd mainbaord and tested for faulted hardware.All intel system H/W's is ok.All works great
    Dual boot works perfectly.Not needs to switch off psu/power back and run system again.
    I think msi z97-g43 mainbıoard have a problem.

  • SA30 USB do not work after reinstall, please help!!

    Hi, my SA30's USB do not work at all after reintalling, I do not have the original CD with the laptop as it is a gift from my mate.... I couldnt find the driver from the website, please could anyone help me???
    I could use the USB mouse but when I plug the external hard disk in, it has no responses, I tried to search for new hardware, it couldnt detect it. Any information would be appreciate, cheers.

    When you instll another OS than the recovery OEM OS you have to install the drivers and tools in a right order!
    This order is on the Tools & Utilities CD in a html file! When you follow these order all hardware should be detect!
    Also you can go to http://eu.computers.toshiba-europe.com and download the drivers
    Bye Hans

  • ZTE Mf190s Internet USB Modem not working after upgrading to Yosemite.

    ZTE Mf190s Internet USB Modem not working after upgrading to Yosemite. any salutation!!

    Follow these steps:
    go to system preferences.. Open Network..
    CONFIGURATION: DEFAULT
    TELEPHONE NUMBER : #99*
    leave account name and password columns blank
    Now go to ADVANCED
    IN MODEM MENU
    VENDOR : GENERIC
    MODEL : GPRS / 3G
    Press ok
    Then CONNECT.. Enjoy.

  • 4530s DC CARD or USB BOOT not working even if it has this option in bios

    i just posted a message but i think it's in the wrong section..
    http://h30434.www3.hp.com/t5/Other-Notebook-PC-questions/sd-card-boot-and-usb-boot-not-working/m-p/9...
    Hi, i just got a HP ProBook  4530s , I5 processor, Intel HD 3000 , i have a problem with it, i can't boot on any usb or sd card, i tried all linux versions i could find and also some live windows and bartPE, on my sd card i get the "Disk read error" as soon as i choose the booting device and on usb it goes a little bit further i can see the linux logo some processes starting and then same error related to write on disk, the sd card and usb are not in read only mode and on my other laptop a older one 6730s everything works...
    Also all the usb and sd card work perfect in windows, when i boot from internal HDD.
    Is there a fix for it??  Or can anybody that has this laptop test if it works booting from usb or sd card, maybe it's a problem with this unit..
    i have tried all available bios verions and various usb devices but as i said the usb sticks all worked on my other laptop but not on this one.
    Oh and also is there a bios option to stop virus check on boot? as far as i could test that is the only option in bios that is not there and i can't test with it ON/OFF.. any help would be apreciated because i can return the laptop for 30 days and i allready have it for one week. and i really need this option to work.
    PS - sorry for my bad english but i'm from Europe

    Quote from: Svet on 13-May-12, 00:13:31
    do >>Clear CMOS Guide<< with power cord removed
    Yes, I've tried this. I pulled the power cable, waited two minutes, hit the CMOS button, and also removed the battery, and waited another minute.
    After which, I loaded optimized defaults, but the problem remains.
    Thanks,
    Ice Piq

Maybe you are looking for

  • Error : 'IDM_DataSource' Can't be created during IDM UI installation

    Dear All, I am installing SAP NW IDM 7.1 on Windows/MSSQL2005.Getting error while creating IDM_DataSource in installation phase of IDM UI. I am using JDBC 2.0 and JDK 1.6 Error java.rmi.RemoteException: com.sap.engine.services.dbpool.exceptions.BaseR

  • Advice for best workflow for catalogue production

    We do several catalogues annually for some customers that are in the 80-120 page range. Each catalogue has between 1000 to 2000 products listed. The layout is based in sections and we use Indesign tables for the part number/description/key technical

  • See iPhone in Vista, not in iTunes...

    I've tried everything listed here in the KB article: http://support.apple.com/kb/TS1363?viewlocale=en_US Still no joy, I can see the phone in Vista, access photos and the like, but it doesn't show up in iTunes. Running the diagnostics, everything's g

  • Will Queries will be created in the Production system?

    Hi all, Is it possible to create queries directly in the Production System. And if there is an issue in the query in production systems can it be fixed in the production system itself nor it should be moved to development and then to qa and then to p

  • Can You Control Photos' Optimization?

    Maybe I am misunderstanding this, but my impression is that Photos’ "optimization" option will NOT just store thumbnails on my Macbook Pro and the full-res version on iCloud (which I would love), but according to the preferences, "Originals will also