Lexmark all in one wont connect to computer

I have a lexmark x5060 but when i try to scan with it it says not conntected to computer ?? does anyone have anything i can try or does anyone know if the product is still anygood

raw212,
Welcome to the HP Community Forum.
I don't have any idea what kind of Lexmark printer this might be -- it doesn't show up under the x5060 name.
Is this perhaps a Lexmark c752 printer?
Regardless, you need to go to Lexmark and see if you can get printer software for your Operating System and -- assuming it is available -- you can install the print driver (software) onto your computer.
After you install the printer software, you should be able to use your printer with your computer.
Try here:  Lexmark Driver Search
If the printer is older, that is, it is "vintage", you still might be able to use it.  Hopefully, Lexmark will have instructions on their website that tell you how to use the available standard printer drivers that come installed in all Windows Operating Systems.  The printer may work with the "standard" drivers at least to the extent that you could use the basic functions like print and copy.
Good Luck!
Click the Kudos Thumbs-Up to say Thank You!
And...Click Accept as Solution when my Answer provides a Fix or Workaround!
I am pleased to provide assistance on behalf of HP. I do not work for HP. 
Kind Regards,
Dragon-Fur

Similar Messages

  • Ipad wont connect to computer

    ipad wont connect to computer say ipad not turned on.

    You have never been able to connect the iPad to any computer nor charge the iPad when connected to the included power adaptor?
    If so, have you tried using a different USB dock connector cable to rule out a problem with the existing cable?
    If yes with no change, the iPad and all package contents include a one year warranty. If you are in the U.S., you can call AppleCare or make an appointment at an Apple store if there is one nearby.

  • I am struggling to get my Lexmark all-in-one to work with my upgraded MAC

    I am struggling to get my Lexmark all-in-one to work with my upgraded MAC

    Try resetting the printing system
    Mac OS X: How to reset the printing system - Apple Support
    What OSX version?
    Maybe this will help even though it is fro a different Kodak printer
    Kodak esp 3250 wont work
    Typically the manufacturer does not give you all the options on a Mac than on a PC. That is up to the manufacturer who writes the drivers for the printers

  • How to print to HP PSC1110 All-In-One Printer connected to WinXP PC?

    Hello everybody,
    I would like to us an HP PSC1110 "all-in-one" printer connected to a Windows PC in another room.
    The easy part: The printer shows up in the browsing window, under the correct Windows domain, when I try to add an "other Printer" device.
    The difficult part: When I try to select the printer model from the list of HP printer models provided, it does not show up, although HP PSC 1110 is included in the list of supported printers.
    I also tried the ESP HP-deskjet drivers, both old and new version. But those result in printer errors on the Windows PC.
    BTW: Printing over the net works well from other Windows PCs!
    Can somebody out there who had a similar problem before give me a hint how to set up printing to an HP "all-in-one" over the Windows-Network?
    Thank you,
    Detlef

    Thank you for the detailed information. Maybe I should have added a few screenshots too.
    The suggested procedure probably works for a HP Photosmart Printer. However, the PSC1110 is a "Printer, Scanner, Copier" all-in-one device. Unfortunately, this one does not show up in the menus, although it is supposed to be supported. I assume that only an USB backend is available, but no SMB backend.
    Is this correct? Is there a workaround?
    Thank you for your feedback
    DC

  • My friend took my ipod touch and did the password now its disabled and wont connect to computer?

    my friend took my ipod touch and did the password now its disabled and wont connect to computer?

    Colton,
    You'll need to connect your iPod to your iTunes library in Recovery Mode and restore it using the instructions in this Apple support document.
    http://support.apple.com/kb/HT1808
    B-rock

  • Ok so I have OS X Lion now and this is what I get:  "You can't open the application Lexmark All In One Center because PowerPC applications are no longer supported."

    ok so I have OS X Lion now and this is what I get:
    "You can't open the application Lexmark All In One Center because PowerPC applications are no longer supported."

    look for the latest drivers on the maker's website.
    check it in your list. this is a lexmark issue not a lion issue.
    http://support.lexmark.com/index?page=content&id=OS22&locale=EN&userlocale=EN_US

  • Hi I have a Lexmark all in one printer how do I get it to work with my ipad mini

    Hi I have a Lexmark all in one printer how do I  get it to work  with my  mini ipad

    It depends upon the model. It's wifi-enabled ? And is it listed on this page as supporting AirPrint : http://support.apple.com/kb/HT4356 ?
    If not then do Lexmark have their own app in your country's store that supports that model ? If they don't then there are a number of third-party printer apps such as Print n Share and PrintCentral Pro which might work with it.

  • TS1369 I have set up 3 ipod today and now the 4th one wont connect to itunes, but will charge from a power point

    I have set up 3 ipod today and now the 4th one wont connect to itunes, but will charge from a power point

    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears
    - Try another cable. I dubt it will help but do it since you have more cables
    - Try another USB port
    - Try on another cable. Again I doubt it will do anything
    - Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
    - Make an appointment at the Genius Bar of an Apple store.
    Apple Retail Store - Genius Bar                          

  • HP Officejet 4620 All-in-One Loses Connection to Wireless Network When It Goes Into Sleep Mode

    My HP 4620 All-In-One wireless printer works fine until it goes into sleep mode.  Once it goes into sleep mode, it doesn't wake up if a print job is sent to it.  If I wake it up manually by pressing the blinking on/off button, it still doesn't print.  If I completely turn it off and then on again, the print job that was queued on my computer will start printing, but that's a huge pain and waste of time nearly every time I want to print.  I've installed all available updates.  I also assigned a static IP address in an effort to correct this but nothing helps.  I see that others have complained about this problem, but I do not see that anyone has had success resolving this.  My operating system is Windows Vista.  I use a Link-Sys Wireless G Router.  Thanks.
    This question was solved.
    View Solution.

    so I have called HP tech support 12 times over the last 6 weeks and still my HP Officejet 4620 loses connection overnight. Of course becasue it was a birthday present I spent more time than I normally would have on this issue. While the tech are very polite they have not fixed my problem and now it is too late to return printer to store. This is a lot of money wasted and I think they need to admit this is a bug in this printer and resolve the problem!!!!!

  • Iphone 4s wont connect to computer

    This actually has gone on for a while now but now its almost a necessity because it seems to be the only way ...
    my iPhone 4s will not connect to my computer since the 7.1.1 update, and to date at 8.0.?!?!?!?
    i updated to 8.0 first day,
    i missed 8.0.1
    i downloaded 8.0.2 and attempted to install
    the first time i got stuck because i didn't have enough space. i hard reset and deleted a few apps.
    i installed 8.0.2 to find my self with a recovery mode bricked iPhone 4s
    i get an iTunes logo and a cord.
    in my mind i thought " okay i just need to fix what ever is keeping it from connect to computer"
    but i noticed the iTunes logo was Red and i freaked out.
    if all is well then the red logo would mean i need to reset my phone, connect to iTunes etc. etc.
    i'm fine with wiping my phone, but i cannot connect to my computer, or iTunes.
    BASICS
    this problem runs with multiple cables
    this problem runs on my computer ( i have not thoroughly tested such act on other computers, but I will tomorrow no doubt)
    this problem cannot be fixed by changing my cable ( as the cable works with many other phones )
    this problem is not affected by my operating system ( although i have not tested on a mac yet )
    upon connecting to my laptop my phone will charge, windows will not detect my device as result calling upon error code 10 or 43
    windows will not see my iPhone in device manager unless its called "unknown device"
    when i plug my phone into the computer i do not get any sign of installing or searching for drivers
    i get error code 10 when i attempt to manually install apple drivers
    i have reinstalled iTunes 32 times without any problems
    i have uninstalled all parts of iTunes and reinstalled from scratch 23 times
    i know this problem revolves around the computer itself or the phone itself
    i have not tested other apple products on the computer, but USB drives work flawlessly ( but take time to begin searching/installing drivers leading me to believe the problem revolves on the phones hardware )
    this problem is not effected by iTunes version as i have tested the 3 latest versions
    my warranty is void for being old lol
    and i really think that your great mind(s) can help me resolve this problem
    THANKS IN ADVANCED
    Message was edited by: Fru5strum

    Well, it appears that you have the latest version of iTunes, as you report removing and reinstalling. Just make sure you are using the latest one.
    The error codes you are reporting are Windows errors, not iPhone or iTunes errors, which makes me what to believe that you are having a computer issue. You can take a look at this support document for a little help with the iPhone driver, see step 5. http://www.apple.com/emea/support/itunes/contact.html
    You again report an error when trying to manually install a driver, again this is a Windows error. You would need to search Microsoft for help with those.

  • 7520 All In One not scanning from computer

    I have a 7520 all in one printer.  I can scan from the printer to my  computer with no problems, I can print from my computer with no  problems.  I have always been able to control scanning from my computer when I put a picture on the printer without any issues.   The HP Photosmart icon on my desktop is there but I cannot open it.  I've tried opening it from the Start Menu and I still can't open it.  Now I've tried going to the HP Solutions Center and when I click on that it says it cannot run b/c installation is not complete.  (I've had this printer for a almost a year and this just happened out of the blue.)
    I uninstalled the printer then reinstalled it again.  I unplugged my printer and my wireless router and retstarted both, all to no avail.  My software is updated and I've run Scan Doctor and everything is in working order. 
    I simply cannot open HP Photosmart from my computer.

    Hi @FinnGirl47,
    Welcome to the HP Forums!
    I understand that you cannot scan from the computer with your HP Photosmart 7520, and I am happy to help! 
    For further assistance, I will need to know: If you are using a Windows or Mac Operating System, and the version number. To find the exact version, visit this link. Whatsmyos, also if the printer is able to make copies.
    In the meantime, please try going through this scanning guide, A 'No Computer Detected' or 'Connection Error' Message Displays during Scanning.
    Thank you for posting!
    RnRMusicMan
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to say “Thanks” for helping!

  • Can't get HP 8620 all-in-one to scan to computer. Advice?

    I just bought a new printer/scanner/fax - HP 8620 all-in-one.
    I have Mac OSX 10.9.3 and the most up to date drivers/software from the HP website (april 2014).  I have connected the printer via ethernet cable to our wireless router.
    I have installed as per intructions.  When I go to HP utilities, I have been able to set up "scan to email" but not "scan to computer". Keeps saying that "scan to computer" software is not available and that I need to go to hp support website to download the latest version (which I already have).
    Have tried uninstalling and reinstalling - no help.
    Any advice?

    You can't use the scan button on the printer. You have to start the scan from OS X.
    See this:
    Mac Basics: Using a scanner
    http://support.apple.com/kb/ht4505
    Austin

  • HP deskjet 2540 All-In-One, wifi connection problem

    When I first installed my HP DJ2540 All-In-One, I changed the password for WIFI connection. Now I upgraded my computer from W 7 to W 8 and not able to have WIFI connection to printer. It is asking for Nework security key. I don't know what it is! please help me.

    Hello there @tnkhayi 
    Welcome to the HP Community
    I read your post about how you're looking for your Network Security Key. I wanted to post you a document that should help you look for it.
    Please check out this link
    I Can't Find the WEP or WPA Key or Password for My Wireless Network
    I hope that helps!
    R a i n b o w 7000I work on behalf of HP
    Click the “Kudos Thumbs Up" at the bottom of this post to say
    “Thanks” for helping!
    Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

  • 80gb classic screen flashes n wont connect to computer but can play threw a docking radio. says fully charged but it dies when disconected.

    bought ipod used and screen flashes and wont lync to computer or car stereo threw cable. older classic does just fine with cable. i have a rigid work radio that has controls for ipod and the ipod plays, says its charged and i have all functions untill i disconect it from radio. then dead. i would like to save the music thats on it if possable.

    Yes, once I 'safely remove from drive' the ipod works normally I can listen to my media, change settings and even reset it by pressing MENU+center button. During resetting it goes straight onto the screen showing the Apple logo and then retuns back to automatically synchronizing with the computer (since its still plugged in to the usb port) and i can go into itunes and play my media via laptop. What type of servicing are you referring to? Should I try buying a new battery or sending it to apple so they can figure it out?
    Two things which happened yesterday which were sorta demoralizing:
    1 After unplugging my ipod from USBport the screen would automatically go black, right after I would hit the PLAY button and would get the "Connect To Power" Warning screen but under very Low Backlight before shutting itself down again. You could hardly see it, but now it doesn't pop up at all or give me any type of warning just a BLACK screen, so the only way of getting the unit to do anything is via usb connection.
    2. Also the day before I had fooled my ipod into being connected to the usb even though I was pulling the usb cable very slowly from underneath its adapter; sorta letting it touch the adapter but not really hooked up to it. Well I managed to get the cable off and my Ipod to work for less than 10 seconds but I was able to scroll down the Main and Playlist menus without any lag or lack of Backlight before it went out. I tried it once more and it didn't work plus I don;t see what the benefits of doing so would be @ this point. But having said that does anyone think it could be a simple battery issue or is this harddrive related? Again the Ipod only work swhen connected to my usb & tells me its fully charged, but once unplugged it goes completely blank...

  • 6g nano wont connect to computer / charge

    My 1.5 year old 6G Nano all of a sudden has stopped working.
    It wont connect to my Laptop (Dosnt even come up on the USB icon) and therefore will not charge or work.
    Not happy. Tried on power point chargers, different computers and still the same.
    So is it stuffed. No need to be nothing has happened to cause any issues.
    Help appreciated.
    Cheers

    What is the error message? and how many apple divices do you have on that same computer?

Maybe you are looking for