Lexmark C522 and printing with Leopard

Hello --
I have a new 24" Mac which came with Mac OS 10.4 and an upgrade to 10.5 I set it up and everything was hunkydory. I then implemented the upgrade and my ability to print fell apart.
I print on a Lexmark C522 through a LAN. Systems Preferences sees the printer as a Bonjour printer, allows me to select it as the preferred printer, and then configures the options. However, when I send something to print, it goes into the spin cycle stating that it cannot connect to the printer and that it will try again in 30 seconds.
This was driving me nuts but I just discovered that I can trigger the printing by putting my computer to sleep and then waking it up.
Augghhh!!! Will I always have to do this?
Thanks,
MNIce
p.s. I have reinstalled the printer driver to no avail.
p.p.s. We have an old AppleTalk network here and can print through that, though it is slower than molasses.
p.p.p.s. I have the same trouble if I try to print through the printer's IP address.

Well to follow up I finally heard back from Epson support...this was the response (note that it says nothing that I did not tell them already).
Thank you for taking the time to contact Epson. It is my pleasure to
respond to your inquiry. Color management is an art, make sure that only
the application or the driver is handling the management. Turn off the
management in the driver if you are allowing Photoshop or other software to
handle the color management. Also make sure when you are allowing
Photoshop to handle the color that you select the proper printer profile.
It's very hard to help with color management via email, you may want to
check some of the on-line color management websites on google.
David P
EPSON Professional Graphics Support Team
Totally useless as I explained in detail that I had already done all of this and was very familiar with color management and the process of using it. And that it was not until the latest OS-X and Epson's driver that the problems started.

Similar Messages

How can I print a doc from my iPhone 4S to a Lexmark Interpret S405 printer with WiFi? Thanks!

How can I print a doc from my iPhone 4S to a Lexmark Interpret S405 printer with WiFi? Thanks!

Unfortunately you need an airprint enabled printer to print from an iOS device. There are some work arounds but they are very complicated and aren't proven to work 100%. From what I understand through rumors they are working on allowing all wireless printers to work with iOS but at the moment that's a pipedream. I don't know how important it is but if you really need to print from iPhone you can find some great AirPrint printers on Ebay for decent prices. Good Luck!

HP Photosmart 7550 printer with Leopard

I'd just like to know if there is anyone who is able to use an HP Photosmart 7550 printer with Leopard.
I can print, but the printing is all garbled.

Thank you for your help HP Mac Architect.
Print Driver from System Preferences-> Print & Fax shows HP PhotoSmart 7550 - CUPS+GutenPrint 5.1.3 . There is another version called HP PhotoSmart 7550 - GutenPrint 5.1.3 .
The same "drivers" show up under http://localhost:631 which tells me that my system is only finding the CUPS driver (I think its a PPD or Postscript Printer Definition file that works with 1 driver for all printer types).
I downloaded the HP drivers on 11/2/2007 - that file is called gutenprint05.1.3.U.dmg (Jun 19 2007). I ran Install Gutenprint 5.1.3.mkpg found on the disk image. This installed the HP PhotoSmart 7550 - CUPS + GutenPrint 5.1.3 drivers.
I also have an HP Printer Selector program from 11/2/2007. If I click the "select" button on this program, it brings me to a screen called HP Printer Utility. At the bottom of the screen it appears to specify a non-cups driver: PhotoSmart/AiO connectivity: photosmart 7550, SN:CNxxxxxx. I can print a test and a diagnostic page from this utility window. The printing is absolutely perfect from this window.
So to me it appears that there is an old photosmart driver seen from the HP Printer Selector program and there are CUPS drivers. yet System Prefs can't find this driver. Or am I wrong.....
Thanks again for trying to help

HT4356 My iPad does not find the printer. I have tried the HP app and it works, but in any other app the printer is not seen. How do I get this printer visible to the iPad. All my other network computers find and print with out a problem.

My iPad does not find the printer. I have tried the HP app and it works, but in any other app the printer is not seen. How do I get this printer visible to the iPad. All my other network computers find and print with out a problem.

hi
could you tell us what the other app is please

I have an iMac running OS X 10.8.3 and have connected an Epson Workforce 2540 printed that is allegedly Airprint enabled. I can connect and print with a USB cable but can't connect via Airprint. My colleague running 10.7 can. Is this a feature of 10.8?

I have an iMac running OS X 10.8.3 and have connected an Epson Workforce 2540 printed that is allegedly Airprint enabled. I can connect and print with a USB cable but can't connect via Airprint. My colleague running 10.7 can. Is this a feature of 10.8? Any ideas for a fix?

iOS devices use AirPrint to connect to a supported printer. OS X will use Bonjour to locate and connect to the same printer.
With the Epson connected to your wireless router, when you open Print & Scan and click the plus button to add, does the Epson appear in a small box with a heading of Nearby Printers?
If not and a window appears showing Default, Fax, IP and Windows in the toolbar, do you see the Epson with the Default view selected?

Report previews and prints with strange characters

I have a custom XI application which uses CCrystalReportViewer11 (C++ wrapper around ActiveX control) to preview reports. This works for hundreds of installations, but for one the text is displayed and printed with strange characters. If the customer exports the report the characters are displayed as normal. What could be wrong?

More than likely, it's a printer driver issue. It may even be that there is no default printer driver installed. Also, see if setting a different default printer driver helps. You can also set the "No Printer" option in the report by opening it in the designer and going to the File menu and selecting "Page Setup".
Ludek

When printing from aperture my margins are unequal, even if i set my margins they come out bigger one side and not the other. i am using a macbook pro running osx lion and printing with a canon pro 9000

when printing from aperture my margins are unequal, even if i set my margins they come out bigger one side and not the other. i am using a macbook pro running osx lion and printing with a canon pro 9000.
please can anbody help or advise?

You didn't mention any color calibration being done on your monitor. This is an essential part of any color-correct workflow. What are you using to calibrate your monitor (and your printer)?
Print profiles (for soft-proofing as well as printing) are for specific combinations of paper & printer. The nine you have are each, most likely, for a common paper (perhaps mfr'd by Canon) to be used with your printer.
I don't know what you mean when you say "I choose a high standard print option".
Have you read the User Manual chapter on printing?
Printing Your Images
There is also a good appendix on calibration:
Calibrating Your Aperture System

No longer printing with Leopard!!

Since upgrading to Leopard I can no longer print anything on Lexmark x5470 all-in-one, regardless of what program I am using, after asking to print the program crashes. I have reinstalled both Leopard and printer sofware,also latest drivers,but it makes no difference.It's really frustrating!!!!!

There are several posts here on problems printing with Lexmark and the IJQuality plugin. If that is the crash you are seeing, you can rename or delete that plugin. It will cause a loss of some functionality, but it won't crash. If you'd like, post the entire crash log from Console here, and we can confirm if that is what's happening.
hope this helps

UPS and iMac with Leopard

I don't know if this is an iMac issue or a Leopard issue. I have a Belkin UPS on my Alum iMac. It was showing up in the Power preference fine. I went to add a USB hub put the UPS on the hub and now I don't see it anymore in the power preference or even in the USB chain. I took off the hub and put the USB cable from the UPS back to the same USB port and I still don't see the UPS. I know the USB port on the iMac is working fine because I plugged my printer into it and it show s up and prints fine. Anyone else have this issue with a UPS. Also I reset my PRAM and no luck. I am also not using any Belkin UPS software as it doesn't support 10.5 anyway. I was using the OS UPS options.
Thanks!!!

I have 2 APC that I did not need to install the software for and it works perfect in Leopard. I also have a client that has a 1500VA Belkin that works in Leopard. I would plug it in directly to your computer then you need to restart before it will see it in the prefs.
http://ftp.georgetek.com/George/UPS%201.png
http://ftp.georgetek.com/George/UPS%202.png

HP Officejet Pro L7680 All in one printer with leopard

Greetings,
Both my girlfriend and I print from home on this nice, newer printer that works great. There were a few bugs with Leopard once we installed it, but eventually it worked perfectly (for the last month or so) with my Macbook Pro. Today however I could not print and it showed up as an active printer. I recalled that when I was stuck in the past, I deleted the printer and then added it again and it worked....however today there is no printer showing up in the boxes. When I click the "+" sign, there is nothing in any choices. I am hooked up wirelessly and have a wireless hub and wireless cable internet. Basically most anyone with a mac could walk in my home and print and I like that. Now it seems my printer has "disappeared"...I did reboot the Mac and also the printer with no luck.
Thanks in advance for any hints or tips!
Jason

Hi,
Try installing the updated HP software which also contains drivers, this is available at
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=oj-56730-1 &lc=en&cc=uk&dlc=en&product=2512009&os=219&lang=en
Hope this helps

EPSON Printing with Leopard --- Less options than in 10.4?

Hello -
Small graphic design business -- using an EPSON 1280 for printing invoices/proofs etc...
Since updating to 10.5 we can't print with the proper paper --- selecting from the EPSON printer pulldown - under print settings -- only to "Matte paper - Heavyweight" - the option to print on Plain Paper, 360 inkjet paper, photo quality ink jet paper and others is grayed out --
We need to print on "plain paper" for invoices and can't figure it out -- also will pose problems with printing proofs for clients -- .. We have tried RE-installing EPSON 1280 print software (twice) to no avail -- ALSO --- the EPSON print untility - used to check ink levels, clean printer etc... -- does not work with LEOPARD 10.5 ---
Does anyone have a solution for this ?
THANK YOU!
Christian Johnson, Principal
Xianstudio, LLC
Website: http://www.xianstudio.com
------------------------------

We need to print on "plain paper" for invoices and can't figure it out -- also will pose problems with printing proofs for clients -- .. We have tried RE-installing EPSON 1280 print software (twice) to no avail -- ALSO --- the EPSON print untility - used to check ink levels, clean printer etc... -- does not work with LEOPARD 10.5 ---
That the utility doesn't work is usually an indication that the driver being used is not Epson's proprietary driver. Try deleting and re-adding the printer using Epson's Leopard driver. That may also help with the paper choices. (There is another thread on this here somewhere.)
Hope this helps.

Need hints on HP printing with Leopard

Color printing with HP Office Jet L7780 is poor with Mac Pro but OK with my MacBook Pro. Using Pages '08 is terrible with Mac Pro. Two sided printing is upside down using either Mac. The printer worked beautifully with Tiger on the MacBook Pro. Any hints would be helpful. I think that changing to my new Airport extreme and new Mac Pro and leopard all at the same time causes confusion for me and the printer.

First stop is to visit www.hp.com and search for updated Leopard drivers for your HP Printer.
terry

Pdf reader X has problems with small pdf and printer with post script driver

Hi friends.
I have installed new Reader X and then i saw that, when i print a very small pdf with about 50 kb and i print it on a Laserjet 4000 printer the printer has problem with the amount of data that reader 10 produces.
When i install a Postscript driver for the printer my computer makes up to 3.5MB printer data from a 50kb pdf.
When i install a PCL driver for the printer my computer makes only 350kb from the same 50kb pdf file!!!!
When i install Reader 9.3 the 50kb file becomes also only 350kb on the printer with post script driver, and i can print without problems also.
my printer has 8 MB Ram and that should be enough for 3.5MB printer data.
But when i print the pdf with 1 side only, the printer created a side who is only filled with 50% of the text, then there comes out a second page with the message.....not enough memory in the printer.
i can not change the postscript driver to a pcl driver cause our ERP System can not handle printer with PCL drivers.
Can someone help me please.........are there settings in Reader X who can solve my problem ???
Thank you very much for help!

put ? after rwcgi60.exe

Anybody has any problems with installing and printing with canon lbp6650dn?

hi,
i bought a new i-sensys lbp6650dn and i am trying to make it work with my macbook 10.5.8. the installation cd that comes with it does not work with mac. i downloaded the latest drivers from canon's website, and could add the printer to my list.
computer's connected to the printer with USB. both the computer and the printer show no error, but whenever i try to print a document it starts printing jumbld letters and numbers that look like programme codes. moreover, it prints around 20 pages for a 1-page document. does anybody know what the problem might be? i am not sure whether there is something wrong with the computer's settings or the printer's. it's the first time installing a printer is giving me such a hard time. any help would be much appreciated.
thanks!

Try reseating your memory. Sometimes this occurs when the RAM is not seated all the way in the slot.
You could also boot from your 1st install disk while holding down the D key. Then run the diagnostics on your MacBook.
Message was edited by: First Magus

Printing with Leopard

I can only print with generic drivers and with those the scan function does not work. When I select any other driver and try to print the application I am printing from is turned off and no printing occurs. This happens with Text Edit, Neo Office, and Microsoft word. I am using an HP Laserjet 3055 All in one.

Check the website more carefully.
What I mean is that I have the same issue with my Canon MP600.
I read that an update is coming sometime this month.
If it's a matter of simply waiting, then that is what I shall advise.
If you are unable to wait and must print, you might have to downgrade back to Tiger until your update becomes available.

Lexmark C522 and printing with Leopard

Similar Messages

Maybe you are looking for