Lexmark printer "broken pipe"
Greetings,
I have had this Lexmark Pro700 printer for couple of years. Just recently I needed to scan a document, the printer downloaded something way too fast for me to stop and after that I am not able to print. When I was able to print antyhing it did not print properly and then totally quit. The hardware is working as I can make copies, but I cannot print wireless or via usb cable. I tried Lexmark and they will offer support if I pay extra, despite my warranty. Anyway, the printer was on the network and 3 computers was able to print, now none of them are. Lion, Mountain Lion and a XP. The support & download site of Lexmark cannot be accessed in either computers. I did purchase a replacement printer and am able to print, but still somethng seens a bit off. Do I have corrupted files? How can I go about finding them? How canI repair teh broken pipe?
Also, the IP address in the printer is valid as we were able to access it. I tried to enter the ip address to set the printer up and still got no results. Help??
Thanks.
Miriam
I have been having the same problem! I have a Lexmark S505 Intuition. For awhile it printed wirelessly just fine. After several chats with the techs, no one seems to be able to help me! However, it seems from forums that it is a common problem.
I will send a print job to the printer. I will get a message that there is no communication. Then, I will "pause" and "resume" the printer and it will finally print. After a few jobs, though, I get a "broken pipe" message. I have gotten the most recent software and firmware updates, uninstalled, and reinstalled, etc. I don't know what else to do. It is still under warranty, but Lexmark wants me to pay for premium support, saying the printer works. HELP!!!!
Lisa
Similar Messages
-
Officejet 8500 A909g unable to print, broken pipe
I have an officejet 8500, A909g connected wirelessly to a Mac desktop computer. Suddenly, my printer has stopped printing, and says: "unable to print, broken pipe." What does this mean? What can I do? There is no paper jam and the cartridges are fine.
Hi @joelile,
Welcome to the HP Forums!
I understand that your HP Officejet 8500a is unable to print red. I am sorry to hear this, but happy to help!
Please see this guide, Printer Prints a Blank Page or Does Not Print Black or Color Ink for the HP Officejet Pro 8500A e-Al....
If the guide does not resolve your issue, please see this post, Re: black ink not working, by @Bob_Headrick.
Hope this helps you to print in red again, and have a great day!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping! -
C7280 All-in-One - uploads hang at 12%, then 45% and prints one page at a time - broken pipe
Printing upload hangs at 12% then 45%, then aborts printing with error message "Stopped - Unable to print data. Broken pipe". Can this be fixed?
This question was solved.
View Solution.Hi JGarner98,
A broken pipe error is a programming construct that is designed to 'pipe' data from point to point. From the description you have provided, it sounds like the operating system is telling yout that is has lost the ability to write date to the printer. This is generally caused by some sort of corruption in the CUPS printing system.
CUPS consists of a print spooler and scheduler, a filter system that converts the print data to a format that the printer will understand, and a backend system that sends this data to the print device. CUPS uses the Internet Printing Protocol (IPP) as the basis for managing print jobs and queues. - Source
To fix this, I suspect the best approach is to reset the printing system, repair disk permissions, re-add the printer using the right driver, and try to printing again.
Reset Printing System
Click the Apple icon ( ), and then click System Preferences.
In the Hardware section, click Print & Fax/Scan. The Print & Fax/Scan dialog box opens.
Right-click (or Ctrl +click) in the left panel, and then click Reset printing system…
Click OKto confirm the reset.
Type the correct Name and Password.
Click OK to reset the printing system. The Print & Fax dialog box shows no printer selected
Note: This will remove all printers in the print and Fax/Scan, any printer removed can be re-added later by clicking the plus (+) symbol.
Repair Disk Permissions
On the Dock, click Applications, and then click Utilities.
Double-clickDisk Utility.
Highlight your hard drive/partition on the left (by default this is "Macintosh HD").
Click the Repair Disk Permissions button at the bottom of the window.
Once the repair is complete, restart the computer and add the printer back.
When you add the printer, please ensure you are using the HP driver, not the AirPrint driver.
Select Add other Printer or Scanner
Select the printer you are adding and next to 'Use' you can the printer driver
I look forward to hearing from you. Please let me know if this resolves the issue. Thanks.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP -
HP 6510 stopped printing black and "broken pipe"
All of a sudden my printer won't print black. I did all the suggestions on your forum for this including hard reset, downloaded the new driver update to operate with Mac 10.9.1 Mavericks, uninstalled and reinstalled printer and the problem is not fixed. I also uninstalled and reinstalled all 4 printer cartridges. Mac and printer are both less than 2 years old. We bought them at the same time. Printer has been great until now but I'm ready to throw it out the window after already having spent hours trying to fix it. The other 3 colors are all working fine for printing. Once the new driver installed I noticed that the print options had changed and now the "broken pipe" message came up on printer and on Mac. I have always printed wirelessly. Please help!
Hi flytibbs,
I understand that you are getting a broken pipe error when reinstalling the software and drivers on your Mac. Here is a link to the Apple Forum where a customer resolved this issue.
For black ink not printing I recommend following the steps in this document for Printer Does Not Print Black Ink or Color Ink, or Prints Blank Pages. If you have done all of the steps in this document, then try installing the driver for the HP Envy 4500 series.
I hope this helps, let me know how it goes.
Thank you,
I worked on behalf of HP. -
OSB 11g proxy service test console fail with Broken pipe
Hi everyone.
I have a strange problem with OSB test console (and sometime with java client). The proxy I built cannot response after several request. In other word, I tried to test console for dozens time, sometime I cannot have response from OSB. I wait for the response for 5 minutes and get some strange exception, that is broken pipe, but error code is not unique.
I cannot understand why my proxy service stuck in that exception. Can you help me to solve it ?
Any suggestion is appreciated.
P/S: that is log record on server:
<BEA-423405> <An exception [Broken pipe] was thrown while rendering the content at [/jsp/test/ServiceResult.jsp].
java.net.SocketOutputStream.socketWrite(SocketOutputStream.java:92) at java.net.SocketOutputStream.write(SocketOutputStream.java:136) at weblogic.servlet.internal.ChunkOutput.writeChunkTransfer(ChunkOutput.java:568) at weblogic.servlet.internal.ChunkOutput.writeChunks(ChunkOutput.java:539) at weblogic.servlet.internal.ChunkOutput.flush(ChunkOutput.java:427) at weblogic.servlet.internal.CharsetChunkOutput.flush(CharsetChunkOutput.java:298) at weblogic.servlet.internal.ChunkOutput$2.checkForFlush(ChunkOutput.java:648) at weblogic.servlet.internal.CharsetChunkOutput.write(CharsetChunkOutput.java:200) at weblogic.servlet.internal.ChunkOutputWrapper.write(ChunkOutputWrapper.java:148) at weblogic.servlet.internal.ServletOutputStreamImpl.write(ServletOutputStreamImpl.java:148) at weblogic.servlet.internal.WLOutputStreamWriter.writeBytes(WLOutputStreamWriter.java:168) at weblogic.servlet.internal.WLOutputStreamWriter.flushBuffer(WLOutputStreamWriter.java:212) at weblogic.servlet.internal.WLOutputStreamWriter.write(WLOutputStreamWriter.java:132) at weblogic.servlet.internal.WLOutputStreamWriter.write(WLOutputStreamWriter.java:113) at weblogic.servlet.internal.DelegateChunkWriter.print(DelegateChunkWriter.java:118) at weblogic.servlet.internal.ChunkOutputWrapper.print(ChunkOutputWrapper.java:171) at weblogic.servlet.jsp.JspWriterImpl.print(JspWriterImpl.java:177) at com.bea.alsb.console.taglibs.test.TestExpandableDataSection.doStartTag(TestExpandableDataSection.java:202) at jsp_servlet._jsp._test.__serviceresult._jspService(__serviceresult.java:341) at weblogic.servlet.jsp.JspBase.service(JspBase.java:34) at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227) at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125) at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300) at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at org.apache.beehive.netui.pageflow.PageFlowPageFilter.continueChainNoWrapper(PageFlowPageFilter.java:455) at org.apache.beehive.netui.pageflow.PageFlowPageFilter.runPage(PageFlowPageFilter.java:432) at org.apache.beehive.netui.pageflow.PageFlowPageFilter.doFilter(PageFlowPageFilter.java:284) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at weblogic.servlet.internal.RequestDispatcherImpl.invokeServlet(RequestDispatcherImpl.java:524) at weblogic.servlet.internal.RequestDispatcherImpl.include(RequestDispatcherImpl.java:444) at org.apache.beehive.netui.pageflow.scoping.internal.ScopedRequestDispatcher.include(ScopedRequestDispatcher.java:119) at com.bea.netuix.servlets.controls.content.JspContent.beginRender(JspContent.java:552) at com.bea.netuix.servlets.controls.content.NetuiContent.beginRender(NetuiContent.java:365) at com.bea.netuix.nf.ControlLifecycle$7.visit(ControlLifecycle.java:485) at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:518) at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:529) at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:529) at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:529) at com.bea.netuix.nf.ControlTreeWalker.walk(ControlTreeWalker.java:220) at com.bea.netuix.nf.Lifecycle.processLifecycles(Lifecycle.java:395) at com.bea.netuix.nf.Lifecycle.processLifecycles(Lifecycle.java:361) at com.bea.netuix.nf.Lifecycle.processLifecycles(Lifecycle.java:352) at com.bea.netuix.nf.Lifecycle.run(Lifecycle.java:326) at com.bea.netuix.nf.UIControl.render(UIControl.java:582) at com.bea.netuix.servlets.controls.PresentationContext.render(PresentationContext.java:486) at com.bea.netuix.servlets.util.RenderToolkit.renderChild(RenderToolkit.java:146) at com.bea.netuix.servlets.jsp.taglib.RenderChild.doStartTag(RenderChild.java:62) at jsp_servlet._framework._skeletons._wliconsole.__flowlayout._jspService(__flowlayout.java:271) at weblogic.servlet.jsp.JspBase.service(JspBase.java:34) at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227) at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125) at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300) at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:183) at weblogic.servlet.internal.RequestDispatcherImpl.invokeServlet(RequestDispatcherImpl.java:526) at weblogic.servlet.internal.RequestDispatcherImpl.include(RequestDispatcherImpl.java:444) at com.bea.netuix.servlets.controls.application.laf.JspTools.renderJsp(JspTools.java:130) at com.bea.netuix.servlets.controls.application.laf.JspControlRenderer.beginRender(JspControlRenderer.java:72) at com.bea.netuix.servlets.controls.application.laf.PresentationControlRenderer.beginRender(PresentationControlRenderer.java:65) at com.bea.netuix.nf.ControlLifecycle$7.visit(ControlLifecycle.java:481) at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:518) at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:529) at com.bea.netuix.nf.ControlTreeWalker.walk(ControlTreeWalker.java:220) at com.bea.netuix.nf.Lifecycle.processLifecycles(Lifecycle.java:395) at com.bea.netuix.nf.Lifecycle.processLifecycles(Lifecycle.java:361) at com.bea.netuix.nf.Lifecycle.processLifecycles(Lifecycle.java:352) at com.bea.netuix.nf.Lifecycle.run(Lifecycle.java:326) at com.bea.netuix.nf.UIControl.render(UIControl.java:582) at com.bea.netuix.servlets.controls.PresentationContext.render(PresentationContext.java:486) at com.bea.netuix.servlets.util.RenderToolkit.renderChild(RenderToolkit.java:146) at com.bea.netuix.servlets.jsp.taglib.RenderChild.doStartTag(RenderChild.java:62) at jsp_servlet._framework._skeletons._wliconsole._popupwindow.__gridlayout._jspService(__gridlayout.java:312) at weblogic.servlet.jsp.JspBase.service(JspBase.java:34) at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227) at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125) at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300) at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:183) at weblogic.servlet.internal.RequestDispatcherImpl.invokeServlet(RequestDispatcherImpl.java:526) at weblogic.servlet.internal.RequestDispatcherImpl.include(RequestDispatcherImpl.java:444) at com.bea.netuix.servlets.controls.application.laf.JspTools.renderJsp(JspTools.java:130) at com.bea.netuix.servlets.controls.application.laf.JspControlRenderer.beginRender(JspControlRenderer.java:72) at com.bea.netuix.servlets.controls.application.laf.PresentationControlRenderer.beginRender(PresentationControlRenderer.java:65) at com.bea.netuix.nf.ControlLifecycle$7.visit(ControlLifecycle.java:481) at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:518) at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:529) at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:529) at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:529) at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:529) at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:529) at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:529) at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:529) at com.bea.netuix.nf.ControlTreeWalker.walk(ControlTreeWalker.java:220) at com.bea.netuix.nf.Lifecycle.processLifecycles(Lifecycle.java:395) at com.bea.netuix.nf.Lifecycle.processLifecycles(Lifecycle.java:361) at com.bea.netuix.nf.Lifecycle.processLifecycles(Lifecycle.java:352) at com.bea.netuix.nf.Lifecycle.run(Lifecycle.java:326) at com.bea.netuix.nf.UIControl.render(UIControl.java:582) at com.bea.netuix.servlets.controls.PresentationContext.render(PresentationContext.java:486) at com.bea.netuix.servlets.util.RenderToolkit.renderChild(RenderToolkit.java:146) at com.bea.netuix.servlets.jsp.taglib.RenderChild.doStartTag(RenderChild.java:62) at jsp_servlet._framework._skeletons._wliconsole.__flowlayout._jspService(__flowlayout.java:271) at weblogic.servlet.jsp.JspBase.service(JspBase.java:34) at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227) at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125) at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300) at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:183) at weblogic.servlet.internal.RequestDispatcherImpl.invokeServlet(RequestDispatcherImpl.java:526) at weblogic.servlet.internal.RequestDispatcherImpl.include(RequestDispatcherImpl.java:444) at com.bea.netuix.servlets.controls.application.laf.JspTools.renderJsp(JspTools.java:130) at com.bea.netuix.servlets.controls.application.laf.JspControlRenderer.beginRender(JspControlRenderer.java:72) at com.bea.netuix.servlets.controls.application.laf.PresentationControlRenderer.beginRender(PresentationControlRenderer.java:65) at com.bea.netuix.nf.ControlLifecycle$7.visit(ControlLifecycle.java:481) at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:518) at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:529) at com.bea.netuix.nf.ControlTreeWalker.walk(ControlTreeWalker.java:220) at com.bea.netuix.nf.Lifecycle.processLifecycles(Lifecycle.java:395) at com.bea.netuix.nf.Lifecycle.processLifecycles(Lifecycle.java:361) at com.bea.netuix.nf.Lifecycle.processLifecycles(Lifecycle.java:352) at com.bea.netuix.nf.Lifecycle.run(Lifecycle.java:326) at com.bea.netuix.nf.UIControl.render(UIControl.java:582) at com.bea.netuix.servlets.controls.PresentationContext.render(PresentationContext.java:486) at com.bea.netuix.servlets.util.RenderToolkit.renderChild(RenderToolkit.java:146) at com.bea.netuix.servlets.jsp.taglib.RenderChild.doStartTag(RenderChild.java:62) at jsp_servlet._framework._skeletons._wliconsole._popupwindow.__gridlayout._jspService(__gridlayout.java:312) at weblogic.servlet.jsp.JspBase.service(JspBase.java:34) at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227) at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125) at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300) at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:183) at weblogic.servlet.internal.RequestDispatcherImpl.invokeServlet(RequestDispatcherImpl.java:526) at weblogic.servlet.internal.RequestDispatcherImpl.include(RequestDispatcherImpl.java:444) at com.bea.netuix.servlets.controls.application.laf.JspTools.renderJsp(JspTools.java:130) at com.bea.netuix.servlets.controls.application.laf.JspControlRenderer.beginRender(JspControlRenderer.java:72) at com.bea.netuix.servlets.controls.application.laf.PresentationControlRenderer.beginRender(PresentationControlRenderer.java:65) at com.bea.netuix.nf.ControlLifecycle$7.visit(ControlLifecycle.java:481) at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:518) at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:529) at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:529) at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:529) at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:529) at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:529) at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:529) at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:529) at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:529) at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:529) at com.bea.netuix.nf.ControlTreeWalker.walk(ControlTreeWalker.java:220) at com.bea.netuix.nf.Lifecycle.processLifecycles(Lifecycle.java:395) at com.bea.netuix.nf.Lifecycle.processLifecycles(Lifecycle.java:361) at com.bea.netuix.nf.Lifecycle.runOutbound(Lifecycle.java:208) at com.bea.netuix.nf.Lifecycle.run(Lifecycle.java:162) at com.bea.netuix.servlets.manager.UIServlet.runLifecycle(UIServlet.java:388) at com.bea.netuix.servlets.manager.UIServlet.doPost(UIServlet.java:258) at com.bea.netuix.servlets.manager.UIServlet.service(UIServlet.java:199) at com.bea.netuix.servlets.manager.SingleFileServlet.service(SingleFileServlet.java:251) at javax.servlet.http.HttpServlet.service(HttpServlet.java:820) at weblogic.servlet.AsyncInitServlet.service(AsyncInitServlet.java:130) at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227) at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125) at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300) at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:111) at java.security.AccessController.doPrivileged(Native Method) at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:313) at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:413) at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:94) at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:161) at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.dms.servlet.DMSServletFilter.doFilter(DMSServletFilter.java:136) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.wrapRun(WebAppServletContext.java:3715) at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3681) at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321) at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120) at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2277) at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2183) at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1454) at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209) at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)Regards
Cuong PhamHi, everyone.
This is my proxy service that was tested above. Can you show me some instructions for tuning it? On these day, I get many bad performance responses from that service.
<?xml version="1.0" encoding="UTF-8"?>
<xml-fragment xmlns:ser="http://www.bea.com/wli/sb/services" xmlns:tran="http://www.bea.com/wli/sb/transports" xmlns:env="http://www.bea.com/wli/config/env" xmlns:http="http://www.bea.com/wli/sb/transports/http" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:con="http://www.bea.com/wli/sb/pipeline/config" xmlns:con1="http://www.bea.com/wli/sb/stages/transform/config" xmlns:con2="http://www.bea.com/wli/sb/stages/config" xmlns:con3="http://www.bea.com/wli/sb/stages/routing/config" xmlns:con4="http://www.bea.com/wli/sb/stages/logging/config">
<ser:coreEntry isProxy="true" isEnabled="true" isTracingEnabled="false">
<ser:binding type="SOAP" isSoap12="false" xsi:type="con5:SoapBindingType" xmlns:con5="http://www.bea.com/wli/sb/services/bindings/config">
<con5:wsdl ref="DnICT_OSB_Project/resources/wsdl/PortalSide"/>
<con5:port>
<con5:name>PortalSideSOAP</con5:name>
<con5:namespace>http://www.example.org/PortalSide/</con5:namespace>
</con5:port>
<con5:selector type="SOAP body"/>
<con5:WSI-compliant>false</con5:WSI-compliant>
</ser:binding>
<ser:monitoring isEnabled="false">
<ser:aggregationInterval>10</ser:aggregationInterval>
<ser:pipelineMonitoringLevel>Pipeline</ser:pipelineMonitoringLevel>
</ser:monitoring>
<ser:reporting>true</ser:reporting>
<ser:logging isEnabled="true">
<ser:logLevel>debug</ser:logLevel>
</ser:logging>
<ser:sla-alerting isEnabled="true">
<ser:alertLevel>normal</ser:alertLevel>
</ser:sla-alerting>
<ser:pipeline-alerting isEnabled="true">
<ser:alertLevel>normal</ser:alertLevel>
</ser:pipeline-alerting>
<ser:ws-policy>
<ser:binding-mode>wsdl-policy-attachments</ser:binding-mode>
</ser:ws-policy>
</ser:coreEntry>
<ser:endpointConfig>
<tran:provider-id>http</tran:provider-id>
<tran:inbound>true</tran:inbound>
<tran:URI>
<env:value>/DnICT_OSB_Project/proxy-services/DnICT_WSDL_PS</env:value>
</tran:URI>
<tran:inbound-properties/>
<tran:all-headers>false</tran:all-headers>
<tran:provider-specific>
<http:inbound-properties/>
</tran:provider-specific>
</ser:endpointConfig>
<ser:router>
<con:pipeline type="request" name="GetRequestInfo_pipeline_pair_request">
<con:stage name="InputProcess_stage">
<con:context>
<con2:varNsDecl namespace="http://www.example.org/PortalSide/" prefix="por"/>
<con2:varNsDecl namespace="http://www.example.org/PortalSide_Test/" prefix="por1"/>
<con2:varNsDecl namespace="http://www.example.org/OutputSchema" prefix="out"/>
</con:context>
<con:actions>
<con1:assign varName="docId">
<con2:id>_ActionId-2456490176600649155--723117a.130d7d91065.-7b86</con2:id>
<con1:expr>
<con2:xqueryText>$body/por:checkStatus/documentId/text()</con2:xqueryText>
</con1:expr>
</con1:assign>
<con1:assign varName="depId">
<con2:id>_ActionId-2456490176600649155--723117a.130d7d91065.-7b69</con2:id>
<con1:expr>
<con2:xqueryText>$body/por:checkStatus/departmentId/text()</con2:xqueryText>
</con1:expr>
</con1:assign>
<con1:assign varName="srvId">
<con2:id>_ActionId-4566721321360037228--34ba1746.13170e34dc9.-7d41</con2:id>
<con1:expr>
<con2:xqueryText>$body/por:checkStatus/serviceId/text()</con2:xqueryText>
</con1:expr>
</con1:assign>
</con:actions>
</con:stage>
</con:pipeline>
<con:pipeline type="response" name="GetRequestInfo_pipeline_pair_response"/>
<con:pipeline type="error" name="_onErrorHandler-4305915913837985194--28b0abb9.13175ecaaa7.-7d31">
<con:stage name="stage1">
<con:context>
<con2:userNsDecl namespace="http://www.example.org/OutputSchema" prefix="ns2"/>
</con:context>
<con:actions>
<con1:replace varName="body">
<con2:id>_ActionId-6209548530523967653-4b474d03.13177132d5d.-7f08</con2:id>
<con1:location>
<con2:xpathText>.</con2:xpathText>
</con1:location>
<con1:expr>
<con2:xqueryText><![CDATA[<soapenv:Body xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/">
<soapenv:Fault>
<faultcode>soapenv:Server</faultcode>
<faultstring>{concat($fault/ctx:errorCode,': ',$fault/ctx:reason)}</faultstring>
<detail>
<ns2:faultResponse>
<errorCode>{$fault/ctx:errorCode/text()}</errorCode>
<reason>{$fault/ctx:reason}</reason>
<location>
<node>{$fault/ctx:location/ctx:node/text()}</node>
<path>{$fault/ctx:location/ctx:path/text()}</path>
</location>
<operation>{$inbound/ctx:service/ctx:operation/text()}</operation>
<uri>{$inbound/ctx:transport/ctx:uri/text()}</uri>
<host>{$inbound/ctx:transport/ctx:request/tp:headers/http:Host/text()}</host>
<request_body>{$copyBody}</request_body>
</ns2:faultResponse>
</detail>
</soapenv:Fault>
</soapenv:Body>]]></con2:xqueryText>
</con1:expr>
</con1:replace>
<con2:reply isError="true">
<con2:id>_ActionId-4305915913837985194--28b0abb9.13175ecaaa7.-7cc3</con2:id>
</con2:reply>
<con4:log>
<con2:id>_ActionId-556838872042008716--23ff25e2.131bcfb490d.-7fae</con2:id>
<con4:logLevel>error</con4:logLevel>
<con4:expr>
<con2:xqueryText>concat('Error while trying to query DnICT web service: ',$fault/ctx:errorCode,' : ',$fault/ctx:reason)</con2:xqueryText>
</con4:expr>
</con4:log>
</con:actions>
</con:stage>
</con:pipeline>
<con:flow>
<con:pipeline-node name="GetRequestInfo_pipeline_pair">
<con:comment>Lay cac thong tin trong form search</con:comment>
<con:request>GetRequestInfo_pipeline_pair_request</con:request>
<con:response>GetRequestInfo_pipeline_pair_response</con:response>
</con:pipeline-node>
<con:branch-node type="condition" name="branching_public_services">
<con:context>
<con2:varNsDecl namespace="http://www.example.org/PortalSide/" prefix="por"/>
</con:context>
<con:branch-table variable="depId">
<con:branch name="SoTTTT">
<con:operator>equals</con:operator>
<con:value>1</con:value>
<con:flow>
<con:branch-node type="condition" name="DnICT_dept_services">
<con:context/>
<con:branch-table variable="srvId">
<con:branch name="DichVu_1">
<con:operator>equals</con:operator>
<con:value>64</con:value>
<con:flow>
<con:route-node name="RouteToDnICT_BS" error-handler="_onErrorHandler-4305915913837985194--28b0abb9.13175ecaaa7.-7d31">
<con:context>
<con2:varNsDecl namespace="http://www.example.org/PortalSide/" prefix="por"/>
<con2:varNsDecl namespace="http://www.example.org/PortalSide_Test/" prefix="por1"/>
<con2:varNsDecl namespace="http://www.example.org/OutputSchema" prefix="out"/>
</con:context>
<con:actions>
<con3:route>
<con2:id>_ActionId-4566721321360037228--34ba1746.13170e34dc9.-7b4c</con2:id>
<con3:service ref="DnICT_OSB_Project/busines-services/DnictServiceBS" xsi:type="ref:BusinessServiceRef" xmlns:ref="http://www.bea.com/wli/sb/reference"/>
<con3:operation>selecttrangthai</con3:operation>
<con3:outboundTransform>
<con1:assign varName="username">
<con2:id>_ActionId-4566721321360037228--34ba1746.13170e34dc9.-7b4b</con2:id>
<con1:expr>
<con2:xqueryText>fn:string('stttt')</con2:xqueryText>
</con1:expr>
</con1:assign>
<con1:assign varName="password">
<con2:id>_ActionId-4566721321360037228--34ba1746.13170e34dc9.-7b4a</con2:id>
<con1:expr>
<con2:xqueryText>fn:string('123456')</con2:xqueryText>
</con1:expr>
</con1:assign>
<con1:replace contents-only="true" varName="body">
<con2:id>_ActionId-4566721321360037228--34ba1746.13170e34dc9.-7b49</con2:id>
<con1:expr>
<con2:xqueryText><![CDATA[<soap:selecttrangthai xmlns:soap="http://soapinterop.org/">
<username xsi:type="xs:string" xmlns:xs="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">{$username}</username>
<password xsi:type="xs:string" xmlns:xs="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">{$password}</password>
<masohoso xsi:type="xs:string" xmlns:xs="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">{$docId}</masohoso>
</soap:selecttrangthai>]]></con2:xqueryText>
</con1:expr>
</con1:replace>
</con3:outboundTransform>
<con3:responseTransform/>
</con3:route>
</con:actions>
</con:route-node>
</con:flow>
</con:branch>
<con:default-branch>
<con:flow/>
</con:default-branch>
</con:branch-table>
</con:branch-node>
</con:flow>
</con:branch>
<con:branch name="SoGTVT">
<con:operator>equals</con:operator>
<con:value>2</con:value>
<con:flow/>
</con:branch>
<con:default-branch>
<con:flow/>
</con:default-branch>
</con:branch-table>
</con:branch-node>
</con:flow>
</ser:router>
</xml-fragment> -
How do you fix a broken pipe in printer in osx mavericks? I have an hp color laserjet 2605dn. It is random and usually goes away after a reboot, but generally occurs when trying to print from adobe acrobat or safari.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Select
/var/log ▹ cups ▹ error_log
from the hierarchical list on the left side of the Console window. If you don't see that list, select
View ▹ Show Log List
from the menu bar. Then select the messages from the time of the last failed printing attempt. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V).
If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message.
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion. -
8500a all in one, and macbook pro wirelessly connected. Broken pipe ????
i have an all in one 8500a and a mac pro wirelessly connected. It has been fine for 7 months. Now I am getting a message that says broken pipe, what do I do? I have no idea what a pipe is.
Hi,
Try resetting the Printing System, then reconfigure the device:
*Be aware that resetting the printer system will remove any existing print queue and reset any customized driver settings.
Click the Apple menu, and then click System Preferences .
Select Print & Fax.
Right-click (or Ctrl + click) your product in the Printers list in the left panel, and then click Reset printing system .
Click OK to confirm the reset.
Type your user Name and Password .
Click OK . The printing system resets.
Now reconfigure the device by following the HP Setup Assistant, located under Applications > Hewlett Packard > Device Utilities.
Now check if the problem been sorted.
If the issue remains with no change, completely remove any installed HP Software by using Scrubber:
**Please be aware that performing the next steps will remove any installed HP Software.
1. Click on Go menu (Click the desktop, then look at the menu in the bar at the top of the page)
2. Select Applications
3. Select the Hewlett-Packard folder
4. Double-click HP Uninstaller application
5. Follow the uninstallation till prompted to select a device to uninstall
6. Press and hold Control + Alt + Cmd keys on the keyboard simultaneously while you click on Uninstall
7. approve any prompt to uninstall any HP Software.
Repair the Mac OS Disc Permissions:
1. Open the the Applications folder.
2. Go to the Utilities folder.
3. Double-click on Disk Utility.
4. Select the hard drive containing the boot volume.
5. Go to the First Aid tab and select Repair Disk Permissions.
Note: This process may take several minutes depending on the Mac and amount of permissions that need to be repaired. The Progress Log will indicate when the proccess has been completed.
Download and install the latest software below:
Mac OS X v10.5 (Leopard) or v10.6 (Snow Leopard):
http://ftp.hp.com/pub/softlib/software11/COL34340/mp-85024-2/OJ_AIO_08_8500_A910_Net_Full_Mac_WW_74....
Mac OS X v10.7 (Lion):
http://ftp.hp.com/pub/softlib/software12/COL40169/bi-97933-2/HP_Lion_Ink_SW_v12-1.13.22.dmg
Finally make sure to install any available HP by clicking the Apple icon and then Software Update.
Please let us know of any further issue,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution -
Broken Pipe in Connection Pooling
Hi! am getting broken pipe exception in connection pooling when am deploying my application in UNIX but my application is working fine if i use NetBeans, Tomcat5.5, Oracle & Windows OS. Can anyone help me. Thanks in adv
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Select
/var/log ▹ cups ▹ error_log
from the hierarchical list on the left side of the Console window. If you don't see that list, select
View ▹ Show Log List
from the menu bar. Then select the messages from the time of the last failed printing attempt. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V).
If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message.
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion. -
Disk Images Won't Mount: Broken Pipe
iBook G4 933 MHz, 640 MB RAM, OS X 10.4.8.
I have two Macs: the offender above, and an eMac G4 800 MHz, both running OS X 10.4.8. Lately, my iBook has refused to mount Disk Images (.dmg format), instead giving a "broken pipe" error.
Below is the system.log entry:
Dec 23 12:17:17 crashdump[3351]: diskimages-helper crashed
Dec 23 12:17:18 crashdump[3351]: crash report written to: /Users/johnalex/Library/Logs/CrashReporter/diskimages-helper.crash.log
Diskimages-helper.crash.log entry:
Host Name: iBook
Date/Time: 2006-12-23 12:03:50.805 -0600
OS Version: 10.4.8 (Build 8L127)
Report Version: 4
Command: diskimages-helper
Path: /System/Library/PrivateFrameworks/DiskImages.framework/Resources/diskimages-hel per
Parent: DiskImageMounter [3312]
Version: ??? (???)
PID: 3313
Thread: 0
Exception: EXCBADACCESS (0x0001)
Codes: KERNINVALIDADDRESS (0x0001) at 0x1018844d
Thread 0 Crashed:
<snipped: lots of com.apple stuff>
Thread 0 crashed with PPC Thread State 64:
srr0: 0x0000000098e4a174 srr1: 0x000000000000f030 vrsave: 0x0000000000000000
cr: 0x24048222 xer: 0x0000000000000004 lr: 0x0000000098e44984 ctr: 0x000000009001491c
r0: 0x0000000098e44964 r1: 0x00000000bfffdcd0 r2: 0x00000000a07be078 r3: 0x0000000001817000
r4: 0x00000000a8def1d0 r5: 0x00000000a07ba95c r6: 0x0000000000000004 r7: 0x0000000000000006
r8: 0x0000000000402454 r9: 0x0000000000000000 r10: 0x0000000000400450 r11: 0x00000000a0006448
r12: 0x000000009001491c r13: 0x0000000000000000 r14: 0x0000000000000001 r15: 0x0000000000000001
r16: 0x0000000000000000 r17: 0x0000000000000000 r18: 0x000000000000150b r19: 0x0000000000000000
r20: 0x0000000010188445 r21: 0x00000000f4e76037 r22: 0x0000000000306938 r23: 0x0000000000306930
r24: 0x00000000bfffe160 r25: 0x00000000bfffe024 r26: 0x00000000bfffe020 r27: 0x000000000030bff0
r28: 0x0000000001816c00 r29: 0x00000000a07ba95c r30: 0x0000000001817000 r31: 0x0000000098e44934
Binary Images Description:
0x1000 - 0x41fff diskimages-helper /System/Library/PrivateFrameworks/DiskImages.framework/Resources/diskimages-hel per
0x8fe00000 - 0x8fe51fff dyld 45.3 /usr/lib/dyld
0x90000000 - 0x901bcfff libSystem.B.dylib /usr/lib/libSystem.B.dylib
0x90214000 - 0x90219fff libmathCommon.A.dylib /usr/lib/system/libmathCommon.A.dylib
0x9021b000 - 0x90268fff com.apple.CoreText 1.0.2 (???) /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ CoreText.framework/Versions/A/CoreText
0x90293000 - 0x90344fff ATS /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ ATS.framework/Versions/A/ATS
0x90373000 - 0x9072dfff com.apple.CoreGraphics 1.258.38 (???) /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ CoreGraphics.framework/Versions/A/CoreGraphics
0x907ba000 - 0x90893fff com.apple.CoreFoundation 6.4.6 (368.27) /System/Library/Frameworks/CoreFoundation.framework/Versions/A/CoreFoundation
0x908dc000 - 0x908dcfff com.apple.CoreServices 10.4 (???) /System/Library/Frameworks/CoreServices.framework/Versions/A/CoreServices
0x908de000 - 0x909e0fff libicucore.A.dylib /usr/lib/libicucore.A.dylib
0x90a3a000 - 0x90abefff libobjc.A.dylib /usr/lib/libobjc.A.dylib
0x90ae8000 - 0x90b58fff com.apple.framework.IOKit 1.4 (???) /System/Library/Frameworks/IOKit.framework/Versions/A/IOKit
0x90b6e000 - 0x90b80fff libauto.dylib /usr/lib/libauto.dylib
0x90b87000 - 0x90e5efff com.apple.CoreServices.CarbonCore 681.7 /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/CarbonC ore.framework/Versions/A/CarbonCore
0x90ec4000 - 0x90f44fff com.apple.CoreServices.OSServices 4.1 /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/OSServi ces.framework/Versions/A/OSServices
0x90f8e000 - 0x90fcffff com.apple.CFNetwork 129.19 /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/CFNetwo rk.framework/Versions/A/CFNetwork
0x90fe4000 - 0x90ffcfff com.apple.WebServices 1.1.2 (1.1.0) /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/WebServ icesCore.framework/Versions/A/WebServicesCore
0x9100c000 - 0x9108dfff com.apple.SearchKit 1.0.5 /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/SearchK it.framework/Versions/A/SearchKit
0x910d3000 - 0x910fdfff com.apple.Metadata 10.4.4 (121.36) /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/Metadat a.framework/Versions/A/Metadata
0x9110e000 - 0x9111cfff libz.1.dylib /usr/lib/libz.1.dylib
0x9111f000 - 0x912dafff com.apple.security 4.6 (29770) /System/Library/Frameworks/Security.framework/Versions/A/Security
0x913d9000 - 0x913e2fff com.apple.DiskArbitration 2.1 /System/Library/Frameworks/DiskArbitration.framework/Versions/A/DiskArbitration
0x913e9000 - 0x91411fff com.apple.SystemConfiguration 1.8.3 /System/Library/Frameworks/SystemConfiguration.framework/Versions/A/SystemConfi guration
0x91424000 - 0x9142ffff libgcc_s.1.dylib /usr/lib/libgcc_s.1.dylib
0x91434000 - 0x9143cfff libbsm.dylib /usr/lib/libbsm.dylib
0x914f8000 - 0x914f8fff com.apple.ApplicationServices 10.4 (???) /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Application Services
0x914fa000 - 0x91532fff com.apple.AE 1.5 (297) /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ AE.framework/Versions/A/AE
0x9154d000 - 0x9161afff com.apple.ColorSync 4.4.4 /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ ColorSync.framework/Versions/A/ColorSync
0x9166f000 - 0x91700fff com.apple.print.framework.PrintCore 4.6 (177.13) /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ PrintCore.framework/Versions/A/PrintCore
0x91747000 - 0x917fefff com.apple.QD 3.10.21 (???) /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ QD.framework/Versions/A/QD
0x9183b000 - 0x91899fff com.apple.HIServices 1.5.3 (???) /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ HIServices.framework/Versions/A/HIServices
0x918c8000 - 0x918ecfff com.apple.LangAnalysis 1.6.1 /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ LangAnalysis.framework/Versions/A/LangAnalysis
0x91900000 - 0x91925fff com.apple.FindByContent 1.5 /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ FindByContent.framework/Versions/A/FindByContent
0x91938000 - 0x9197afff com.apple.LaunchServices 181 /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ LaunchServices.framework/Versions/A/LaunchServices
0x91996000 - 0x919aafff com.apple.speech.synthesis.framework 3.3 /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ SpeechSynthesis.framework/Versions/A/SpeechSynthesis
0x919b8000 - 0x919fafff com.apple.ImageIO.framework 1.5.0 /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ ImageIO.framework/Versions/A/ImageIO
0x91a10000 - 0x91ad7fff libcrypto.0.9.7.dylib /usr/lib/libcrypto.0.9.7.dylib
0x91b25000 - 0x91b3afff libcups.2.dylib /usr/lib/libcups.2.dylib
0x91b3f000 - 0x91b5dfff libJPEG.dylib /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ ImageIO.framework/Versions/A/Resources/libJPEG.dylib
0x91b63000 - 0x91bd2fff libJP2.dylib /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ ImageIO.framework/Versions/A/Resources/libJP2.dylib
0x91be9000 - 0x91bedfff libGIF.dylib /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ ImageIO.framework/Versions/A/Resources/libGIF.dylib
0x91bef000 - 0x91c4efff libRaw.dylib /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ ImageIO.framework/Versions/A/Resources/libRaw.dylib
0x91c53000 - 0x91c90fff libTIFF.dylib /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ ImageIO.framework/Versions/A/Resources/libTIFF.dylib
0x91c97000 - 0x91cb0fff libPng.dylib /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ ImageIO.framework/Versions/A/Resources/libPng.dylib
0x91cb5000 - 0x91cb8fff libRadiance.dylib /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ ImageIO.framework/Versions/A/Resources/libRadiance.dylib
0x91cba000 - 0x91cbafff com.apple.Accelerate 1.2.2 (Accelerate 1.2.2) /System/Library/Frameworks/Accelerate.framework/Versions/A/Accelerate
0x91cbc000 - 0x91da1fff com.apple.vImage 2.4 /System/Library/Frameworks/Accelerate.framework/Versions/A/Frameworks/vImage.fr amework/Versions/A/vImage
0x91da9000 - 0x91dc8fff com.apple.Accelerate.vecLib 3.2.2 (vecLib 3.2.2) /System/Library/Frameworks/Accelerate.framework/Versions/A/Frameworks/vecLib.fr amework/Versions/A/vecLib
0x91e34000 - 0x91ea2fff libvMisc.dylib /System/Library/Frameworks/Accelerate.framework/Versions/A/Frameworks/vecLib.fr amework/Versions/A/libvMisc.dylib
0x91ead000 - 0x91f42fff libvDSP.dylib /System/Library/Frameworks/Accelerate.framework/Versions/A/Frameworks/vecLib.fr amework/Versions/A/libvDSP.dylib
0x91f5c000 - 0x924e4fff libBLAS.dylib /System/Library/Frameworks/Accelerate.framework/Versions/A/Frameworks/vecLib.fr amework/Versions/A/libBLAS.dylib
0x92517000 - 0x92842fff libLAPACK.dylib /System/Library/Frameworks/Accelerate.framework/Versions/A/Frameworks/vecLib.fr amework/Versions/A/libLAPACK.dylib
0x9293b000 - 0x92b66fff com.apple.Foundation 6.4.6 (567.27) /System/Library/Frameworks/Foundation.framework/Versions/C/Foundation
0x92c84000 - 0x92d62fff libxml2.2.dylib /usr/lib/libxml2.2.dylib
0x92d82000 - 0x92e70fff libiconv.2.dylib /usr/lib/libiconv.2.dylib
0x936a5000 - 0x936d5fff com.apple.MediaKit 8.6.2 (345.1.8) /System/Library/PrivateFrameworks/MediaKit.framework/Versions/A/MediaKit
0x945a6000 - 0x945ebfff com.apple.bom 8.5 (86.3) /System/Library/PrivateFrameworks/Bom.framework/Versions/A/Bom
0x94f2b000 - 0x94f5afff libssl.0.9.7.dylib /usr/lib/libssl.0.9.7.dylib
0x95380000 - 0x95380fff com.apple.DiscRecording 3.1.3 (???) /System/Library/Frameworks/DiscRecording.framework/Versions/A/DiscRecording
0x95382000 - 0x95405fff com.apple.DiscRecordingEngine 3.1.3 /System/Library/Frameworks/DiscRecording.framework/Versions/A/Frameworks/DiscRe cordingEngine.framework/Versions/A/DiscRecordingEngine
0x95432000 - 0x95478fff com.apple.DiscRecordingContent 3.1.3 /System/Library/Frameworks/DiscRecording.framework/Versions/A/Frameworks/DiscRe cordingContent.framework/Versions/A/DiscRecordingContent
0x95676000 - 0x9569efff libcurl.3.dylib /usr/lib/libcurl.3.dylib
0x98de4000 - 0x98ef2fff com.apple.DiskImagesFramework 10.4.7 (114.1) /System/Library/PrivateFrameworks/DiskImages.framework/Versions/A/DiskImages
0x98f70000 - 0x98f7dfff libbz2.1.0.dylib /usr/lib/libbz2.1.0.dylib
Sorry about the length, but I thought someone might need it.
The eMac still mounts disk images with no problem.
I've never run VPC on this machine, so this isn't tied to the VPC disk mounting bug I've seen on the lists.
Any help would be greatly appreciated.
Merry Christmas!I solved the error by installing the OS X 10.4.8 Combo Update. This update was in a .dmg file, of course, but I mounted the disk image on my eMac and then copied the update to the iBook. Goes to show the advantage of having 2 machines in case one breaks.
HTH someone else. -
Sftp fails on OS X Mavericks with broken pipe
I'm (eventually) getting a broken pipe failure when attempting to connect an sftp session to a local Ubuntu Linux host. I can open an ssh session with no problems. I've tried with both password and public key authentication, and this doesn't seem to be the problem (see debug output below).
From an Ubuntu VM running under Fusion on the same Mac I can connect without problems (see second listing below).
Can anyone tell me what the problem is?
Tail of the debug listing for the OS-X session follows:
debug1: Host 'pptablet.local' is known and matches the RSA host key.
debug1: Found key in /Users/ppanish/.ssh/known_hosts:1
debug2: bits set: 515/1024
debug1: ssh_rsa_verify: signature correct
debug2: kex_derive_keys
debug2: set_newkeys: mode 1
debug1: SSH2_MSG_NEWKEYS sent
debug1: expecting SSH2_MSG_NEWKEYS
debug2: set_newkeys: mode 0
debug1: SSH2_MSG_NEWKEYS received
debug1: Roaming not allowed by server
debug1: SSH2_MSG_SERVICE_REQUEST sent
debug2: service_accept: ssh-userauth
debug1: SSH2_MSG_SERVICE_ACCEPT received
debug2: key: /Users/ppanish/.ssh/id_rsa (0x7ff23a40bb10),
debug2: key: /Users/ppanish/.ssh/id_dsa (0x0),
debug1: Authentications that can continue: publickey,password
debug1: Next authentication method: publickey
debug1: Offering RSA public key: /Users/ppanish/.ssh/id_rsa
debug2: we sent a publickey packet, wait for reply
debug1: Server accepts key: pkalg ssh-rsa blen 279
debug2: input_userauth_pk_ok: fp 6b:75:d3:ab:53:b1:da:fc:56:1c:30:50:30:27:d7:fc
debug1: Authentication succeeded (publickey).
Authenticated to pptablet.local ([fd1c:e6c9:ee1e::21c:7eff:fe05:8921]:22).
debug2: fd 6 setting O_NONBLOCK
debug1: channel 0: new [client-session]
debug2: channel 0: send open
debug1: Requesting [email protected]
debug1: Entering interactive session.
debug2: callback start
debug2: fd 5 setting TCP_NODELAY
debug2: client_session2_setup: id 0
debug1: Sending environment.
debug1: Sending env LANG = en_US.UTF-8
debug2: channel 0: request env confirm 0
debug1: Sending subsystem: sftp
debug2: channel 0: request subsystem confirm 1
debug2: callback done
debug2: channel 0: open confirm rwindow 0 rmax 32768
Write failed: Broken pipe
Connection closed
The following is the end of the debug listing for a successful session from the Ubuntu VM running on the Mac, starting where the OS X implementation fails. Am I correct in thinking that OS X is failing to respond to a negotiation of parameters indicated by the line with asterisks in this listing?:
debug2: channel 0: open confirm rwindow 0 rmax 32768
**debug2: channel 0: rcvd adjust 2097152**
debug2: channel_input_status_confirm: type 99 id 0
debug2: subsystem request accepted on channel 0
debug2: Remote version: 3
debug2: Server supports extension "[email protected]" revision 1
debug2: Server supports extension "[email protected]" revision 2
debug2: Server supports extension "[email protected]" revision 2
debug2: Server supports extension "[email protected]" revision 1
Connected to pptablet.local.I can't get HP Scan to work. From my investigations, HP failed to update /Library/Image Capture/Support/Hewlett-Packard/Frameworks/HPScanProfiles.framework/Versions/A/ HPScanProfiles to point to /Library/Printers/hp/Frameworks/HPDeviceModel.framework/Versions/4.0/HPDeviceMo del places, vice /HPDeviceModel.framework/Versions/3.0. I can launch HP Scan, but an error comes up, which basically says reinstall the HP software, not the HP Printer Drivers update. I'm still working on that step.
Using the HP Photosmart C4600 Series app, the Printers & Scanners prefPane, or Image Capture, I can get the scanner to work and it saves without any issues. -
Weblogic 8.1 SP6 with 10g SocketException: Write failed: Broken pipe
Hi
We have recently upgraded DB from 9.2.0 to 10.2.0 (DB installed on XP), Our application is deployed on WebLogic 8.1 SP6 (installed on Linux Enterprise 5.2), every thing worked fine but after upgrade, application server log throw following exception if i change connection pool to use url for 10g instead of 9i,
Actions
Updated thin client driver by following instructions from
http://e-docs.bea.com/wls/docs81/jdbc/thirdparty.html#1110914 but it didnt work
Any other suggestions
java.net.SocketException: Write failed: Broken pipe
at jrockit.net.SocketNativeIO.writeBytesPinned(I[BII)V(Native Method)
at jrockit.net.SocketNativeIO.socketWrite(Ljava.io.FileDescriptor;[BII)V(Unknown Source)
at java.net.SocketOutputStream.socketWrite0(Ljava.io.FileDescriptor;[BII)V(SocketOutputStream.java:???)
at java.net.SocketOutputStream.socketWrite(SocketOutputStream.java:92)
at java.net.SocketOutputStream.write(SocketOutputStream.java:136)
at weblogic.servlet.internal.ChunkUtils.writeHeaderChunk(ChunkUtils.java:218)
at weblogic.servlet.internal.ChunkUtils.writeChunkTransfer(ChunkUtils.java:259)
at weblogic.servlet.internal.ChunkUtils.writeChunks(ChunkUtils.java:243)
at weblogic.servlet.internal.ChunkOutput.flush(ChunkOutput.java:311)
at weblogic.servlet.internal.ChunkOutput.checkForFlush(ChunkOutput.java:389)
at weblogic.servlet.internal.ChunkOutput.print(ChunkOutput.java:271)
at weblogic.servlet.internal.ChunkOutputWrapper.print(ChunkOutputWrapper.java:138)
at weblogic.servlet.jsp.JspWriterImpl.print(JspWriterImpl.java:282)
at jsp_servlet.__transferbetweenaccounts._writeText(__transferbetweenaccounts.java:172)
at jsp_servlet.__transferbetweenaccounts._jspService(__transferbetweenaccounts.java:538)
at weblogic.servlet.jsp.JspBase.service(JspBase.java:33)
at weblogic.servlet.internal.ServletStubImpl$ServletInvocationAction.run(ServletStubImpl.java:1077)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:465)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:348)
at weblogic.servlet.internal.RequestDispatcherImpl.include(RequestDispatcherImpl.java:646)
at weblogic.servlet.internal.RequestDispatcherImpl.include(RequestDispatcherImpl.java:431)
at com.bankframe.fe.statemachine.ext.connectors.servlet.JSPView.build(JSPView.java:114)
at com.bankframe.fe.statemachine.ext.apps.View.build(View.java:64)
at com.bankframe.fe.statemachine.base.RequestManager.manageRequest(RequestManager.java:364)
at com.bankframe.fe.statemachine.ext.connectors.servlet.EntryServlet.delegateToRequestManager(EntryServlet.java:75)
at com.bankframe.fe.statemachine.ext.connectors.servlet.EntryServlet.doPost(EntryServlet.java:105)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at weblogic.servlet.internal.ServletStubImpl$ServletInvocationAction.run(ServletStubImpl.java:1077)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:465)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:348)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:7047)I can't guess this issue has to do with Database and its driver.
Possible reason could be that the browser is closed when the site is rendering the response from the server.
The error indicates the communication is broken.
This particular servlet/jsp is trying to write something on the response stream for which the call started from the below line:
at jsp_servlet.__transferbetweenaccounts._writeText(__transferbetweenaccounts.java:172) -
I was printing large format color images on my HP Color LaserJet CP1515 with great results when suddenly one image did not come out. I checked the printer and appeared this info: Error 49 Broken Pipe... I thought it was a printer problem, I turned off and on and tried to print the demo page. It worked perfectly, tried an Acrobat file with image and again perfect, so I tried again the file I had the issue and again no results... This file was being printed using Photoshop.
I would appreciate any help about this issue.
Thanks!
MarioThe following is the scenario where the broken pipe exception occurs to me:
- webapp on a Linux server with Apache + Tomcat.
- database (SQL Server) on another computer.
- the webapp creates one db connection at startup, stores it in the ServletContext and always uses that connection for any db access.
- If the db server is restarted, or just the SQL Server service is restarted, the connection that was in the ServletContext becomes invalid, and any attempt to access the db through it throws the broken pipe exception.
At this point the webapp has to recreate the connection and re-store it in the ServletContext in order to gain access to the db again.
HTH -
When I try to download a program and then install, I get a message of "Broken Pipe" I'm on a Mac G5 with OS 10.4.11. Can't find any help. HELP Please!!!
There are several "Mac" G5s. If you in fact have an iMac G5, need more detailed info from you............
Which "model" & "generation" G5 iMac do you have?
Need this info so that the knowledgeable users can provide you with the proper troubleshooting solution(s).
http://docs.info.apple.com/article.html?artnum=301724-en How to identify your iMac
http://docs.info.apple.com/article.html?path=Mac/10.4/en/mh355.html Getting information about your computer
You can have this info displayed on the bottom of every post by going to 'My Settings' which is located in the column on the right under your name, and filling in the information asked for.
Thank you
=======================
Really strange error. I did a forum search for this +Broken Pipe+ error. It appears to be some type of printer and/or terminal error. No solution found.
Did a Google search & found this error is some type of Linux error. No solution that I could find.
Until MGW or some other knowledgeable user comes along suggest that you contact Apple Care in the meantime if you have it. -
I am a Mac User having "broken pipe" issues with my HP photosmart 7510
I am a Mac user having trouble printing from my computer to my HP photosmart 7510. The message is that I have a
"broken pipe". What is this? What do I need to do to fix this?Hello Jacaranda,
Thanks for the post. Check the below thread for some good information on getting this resolved. Good Luckand thanks to IronBadger!
http://h30434.www3.hp.com/t5/Mac-Printing-and-Scanning/the-meaning-broken-pipe/td-p/897133
Basically the OS is telling you that it has lost the ability to write data to the printer. This would typically be caused by some sort of corruption in the CUPS printing system.
The first thing I would try is Restting the print system and re-adding the printer.
To do this open System Preferences and then Open Print & Fax. Then <control> click or right click on the blank space around the list of printers on the left hand side. You should see a pop up menu and the option to Reset print system.
Once you select that the OS will restore the CUPS printing system to all the original default settings. Thsi will of course erase all of your print queues.
Once that is done I would reboot the Macintosh and the printer. Then go back to System Preferences--> Print & Fax and then re-add the printer.
I worked for HP but my posts and replies are my own....Thank you!
*Say thanks by clicking the *Kudos!* which is on the left*
*Make it easier for other people to find solutions, by marking my answer with (Accept as Solution) if it solves your issue.* -
Jackd + guitar: "timeouts and broken pipes"
Hi friends! I'm trying to pass my electric guitar via any rack/effects (like Guitarix or Creox) with no luck. I've got this sound card:
01:06.0 Multimedia audio controller: Creative Labs [SB Live! Value] EMU10k1X
01:06.1 Input device controller: Creative Labs [SB Live! Value] Input device controller
I try with QJackCtl and invoking jackd from the terminal with any luck.
jackd -d alsa -C -P
jackd 0.121.3
Copyright 2001-2009 Paul Davis, Stephane Letz, Jack O'Quinn, Torben Hohn and others.
jackd comes with ABSOLUTELY NO WARRANTY
This is free software, and you are welcome to redistribute it
under certain conditions; see the file COPYING for details
could not open driver .so '/usr/lib/jack/jack_net.so': libcelt0.so.2: cannot open shared object file: No such file or directory
could not open driver .so '/usr/lib/jack/jack_firewire.so': libffado.so.2: cannot open shared object file: No such file or directory
JACK compiled with System V SHM support.
loading driver ..
creating alsa driver ... hw:0|hw:0|1024|2|48000|0|0|nomon|swmeter|-|32bit
control device hw:0
configuring for 48000Hz, period = 1024 frames (21.3 ms), buffer = 2 periods
ALSA: final selected sample format for capture: 16bit little-endian
ALSA: use 2 periods for capture
ALSA: final selected sample format for playback: 16bit little-endian
ALSA: use 2 periods for playback
jackd watchdog: timeout - killing jackd
[gabo@machina ~]$
This is the output from QJackCtl:
00:12:07.126 Client deactivated.
00:12:07.130 JACK is being forced...
cannot read server event (Success)
cannot continue execution of the processing graph (Bad file descriptor)
zombified - calling shutdown handler
cannot send request type 7 to server
cannot read result for request type 7 from server (Broken pipe)
cannot send request type 7 to server
cannot read result for request type 7 from server (Broken pipe)
00:12:07.339 JACK was stopped with exit status=1.
I can hear my guitar and record with Audacity, but when jackd enter into the escenario everything blows up. I read that nowadays almost any sound card will work with QJackCtl with the default options. I play with the parameters and sometimes jack refuse to start. With the default options on i can make it run, but i get no sound of the racks or guitar effects processors neither the guitar tuners that use jack takes the sound from the guitar. My line input is in capture via alsamixer, but still no luck. Any clue on this? I'm skipping steps?
Thanks in advance.
iamgaboHi!
groups && cat /proc/asound/cards && cat ~/.asoundrc && cat '/etc/security/limits.d/audio.conf' && jackd -v
adm disk lp wheel http network video audio optical storage power users polkitd vboxusers wireshark kismet
0 [Live ]: EMU10K1X - Dell Sound Blaster Live!
Dell Sound Blaster Live! at 0xcc00 irq 17
#pcm.upmix71 {
#type upmix
#slave.pcm "surround71"
#delay 15
#channels 8
pcm.!default {
type hw
card 0
ctl.!default {
type hw
card 0
# convert alsa API over jack API
# use it with
# % aplay foo.wav
# use this as default
pcm.!default {
type plug
slave { pcm "jack" }
ctl.mixer0 {
type hw
card 1
# pcm type jack
pcm.jack {
type jack
playback_ports {
0 system:playback_1
1 system:playback_2
capture_ports {
0 system:capture_1
1 system:capture_2
cat: /etc/security/limits.d/audio.conf: No such file or directory
I have a file called 99-audio.conf
cat /etc/security/limits.d/99-audio.conf
@audio - rtprio 99
@audio - memlock unlimited
Also i've seen some guys changing this file too:
cat /etc/security/limits.conf
# /etc/security/limits.conf
#Each line describes a limit for a user in the form:
#<domain> <type> <item> <value>
#Where:
#<domain> can be:
# - an user name
# - a group name, with @group syntax
# - the wildcard *, for default entry
# - the wildcard %, can be also used with %group syntax,
# for maxlogin limit
#<type> can have the two values:
# - "soft" for enforcing the soft limits
# - "hard" for enforcing hard limits
#<item> can be one of the following:
# - core - limits the core file size (KB)
# - data - max data size (KB)
# - fsize - maximum filesize (KB)
# - memlock - max locked-in-memory address space (KB)
# - nofile - max number of open files
# - rss - max resident set size (KB)
# - stack - max stack size (KB)
# - cpu - max CPU time (MIN)
# - nproc - max number of processes
# - as - address space limit (KB)
# - maxlogins - max number of logins for this user
# - maxsyslogins - max number of logins on the system
# - priority - the priority to run user process with
# - locks - max number of file locks the user can hold
# - sigpending - max number of pending signals
# - msgqueue - max memory used by POSIX message queues (bytes)
# - nice - max nice priority allowed to raise to values: [-20, 19]
# - rtprio - max realtime priority
#<domain> <type> <item> <value>
#* soft core 0
#* hard rss 10000
#@student hard nproc 20
#@faculty soft nproc 20
#@faculty hard nproc 50
#ftp hard nproc 0
#@student - maxlogins 4
* - rtprio 0
* - nice 0
@audio - rtprio 65
@audio - nice -10
@audio - memlock unlimited
jackd 0.121.3
There are the snaps for QJackCtl
Also, checkout this stuff that i've recorded with audacity, only from the line and nothing else
http://ompldr.org/vZ3A2eg
Thanks!
Last edited by iamgabo (2012-12-15 02:21:08)
Maybe you are looking for
-
HD footage in 4:3 timeline project comes out stretched during playback!
Hello Fellow Final Cutters, I am doing some projections for a theatre show, and need to project in 4:3 aspect to maximize screen area on an unusual shaped screen. I am using FCP6 and monitoring onto both my Apple 20" display and/or NEC (native 4:3) p
-
Has anyone run Adobe Premiere 6.5 on a Macbook?
Hi, I was wondering if anyone has tried out Premiere 6.5 on their Macbook to see if it works- Even if it is or isn't the program you use now. Would appreciate knowing if it will run. Thank you
-
I have a movieclip symbol on the stage which I am applying 3D rotations to. When I move the object, the features shift in a 3d environment relative to the stage and its vanishing point. I am trying to figure out how I can have multiple 3d objects on
-
BRUSH: Angle Jitter- Direction problem when using Rotate View
(Photoshop CS5 Extended, MAC OSX) When using the brush tool(with angle jitter set to Direction), an error pops up when also rotating view. As long as the canvas is at its default orientation(ie, rotate view tool has not been used), the brush paint
-
Time Machine Disconnects from iMac
I'm using Mcafee security software downloaded from AT&T. I discovered that when Mcafee firewall is turned on in their prefs it disconnects my time machine from my Imac. Apple firewall in security prefs works fine. Imac works fine in all respects (so