Lexmark Printer does not support Lion OS X 10.7.1
I've just recently perchased both a MacBook Pro with lion 10.7.1, along with a Lexmark interpret s405 printer. When I went to install the printer it said that my version of OS X was not supported, even after I installed a printer driver update for 10.7. There is no update that I know of available for 10.7.1. Is there anything that I can possibly do to solve this issue?
You've tried here:
http://support.lexmark.com/index?locale=en&page=product&productCode=LEXMARK_INTE RPRET_S405&segment=SUPPORT&userlocale=EN_US&frompage=null#2
Similar Messages
-
Just upgraded my mac book pro to the lion operating system, the next day my printer broke. Went to buy a new printer that supports AirPrint because I also have an iPad ( my old printer did NOT support AirPrint ). The printer I bought is an HP that said it supported AirPrint, when I installed the printer and try to run the installation software it said the printer did not support lion. Any answers or suggestions, I would LOVE to be able to finally print from my iPad.
Check with HP whether the printer and/or printer driver is compatible with Lion. Any hint as to what printer?
-
My printer does not support the new OS
I updated to the new OS and now i cant print anything. i pop in the cd and it says that it dose not support this os. now what?
It appears to be supported for printing only:
-
Lexmark does not support USB printing with Airport express
See email from Lexmark:
Hi Herman,
Welcome to Lexmark e-mail support. I appreciate your query into Lexmark.
Lexmark Inkjet printers are host based & work only USB attached. Currently Lexmark International does not support Airport Express on these printers.
If you have any more questions or concerns, please contact me at your convenience and I will be happy to assist you. (If I am not available, another representative will reply to you as soon as possible.) To respond, please select "Reply" in your e-mail software, and be sure that the past e-mail is included in this reply.
Regards,
Arshad
Lexmark Technical Support
***Original Message***
On Sun Jun 18th 03:20:53 PM EST 2006, hernan.
Dear Mamta,
Thank you very much for your support. I already tried what you
mention, but still without success. I downloaded again the x1100 all
in one driver but still I can't print.
Any suggestions?
Thank you,
Hernan
-----Original Message-----
From: [email protected] [mailto:[email protected]]
Sent: Sunday, June 18, 2006 7:30 AM
To: hernan
Subject: Re:Lexmark Technical Support (Req# 942782055)
Dear Hernan,
Thank you for contacting us regarding this matter. I appreciate the
opportunity to assist you, and I hope my suggestions will provide a
resolution.
Please follow the steps given below:
1. Click on "Start," "Control Panel" and "Printers and Faxes."
2. Right click on the Lexmark printer icon.
3. Click on "Properties."
4. Click on "Ports" tab.
5. Place a check mark against "Enable Bidirectional Support."
6. Click on "OK."
You may copy and paste the web address given below to access the
Lexmark 1000/1100 Color Jet printer Windows XP driver:
http://downloads.lexmark.com/cgi-perl/downloads.cgi?ccs=229:
1:0:1:0:0&emeafr
ame=&fileID=1580&searchLang=en&searchLang=en
Please use the following steps to download the Lexmark 1100 Color Jet
printer Windows XP driver to your desktop:
1. Click on "Download Now."
2. On the "File Download" screen, choose "Save."
3. The next screen will be titled "Save As." Choose to "Save in
Desktop"
and click "OK."
4. You should see files being transferred.
***Note*** If your browser uses a different file downloading format
than specified above, you will need to resort to your browsers help
files for downloading instructions. The object of steps 1 - 4 is to
download the driver to your desktop. This way it is easily accessible.
5. Once the files have completed downloading, double click on the icon
with your file name.
6. On the "Win Zip Self-Extractor" screen click "OK."
7. To unzip the downloaded file choose "Unzip."
8. A screen will then display the number of files unzipped
successfully, click "OK."
9. Please follow the on screen instructions to complete installation
of your Lexmark printer.
If you have any more questions or concerns, please contact me at your
convenience and I will be happy to assist you. (If I am not available,
another representative will reply to you as soon as
possible.) To respond,
please select "Reply" in your e-mail software, and be sure that the
past e-mail is included in this reply.
[AOL Users: In order to include the previous e-mail, you must
highlight it with your mouse when you are replying.]
If you need to reply, please be sure to include in your message all
information from prior e-mail messages & replies. If your e-mail
client automatically deletes prior e-mail thread information, it will
cause a delay while we look up your support history. If this is the
case you may want to save the old e-mails as attachments and attach
them to the current e-mail.
Sincerely,
Mamta V
Lexmark eSupport Team
http://support.lexmark.com
Rate Your Support Experience! Your feedback is extremely valuable to
us.
Please click the link below to participate in the Lexmark Customer
Support Survey.
http://support.lexmark.com//cgi-bin/survey.cgi?getSurveyID=7
07&getSurveyName
=
***Original Message***
On Sat Jun 17th 06:20:55 AM EST 2006,
hernan.>
I purchased the Apple airport express that connects
multiple
wireless-networked PCs to a usb printer.
is there a driver that can make this work?. I configured
the printer
according to the manual, received a test page and so on, but now it
takes ages to start printing and printing never gets to 100%
completion but to 99%. I am not able to cancel printing jobs and this
is a whole mess.
Best regards,
Hernan
vaio pcg-6c2l and IBM x40 Windows XP Both service pack2Did you have a question?
-
My printer does not work with mountain lion
I recently upgraded to Mountain Lion and now my HP Officejet Pro 8600 printer does not work. I downloaded the required driver from the App Store but am still not able to connect. Is there actually a solution for this or do I need to find a way to downgrade my OS to one that is compatible with my printer?
From the HP site:
Compatible operating systems
Microsoft® Windows® 7, Windows Vista®, Windows® XP (SP3)* or higher (32-bit only): *Supports 32-bit only; Mac OS X v 10.5, v 10.6 or v 10.7; Linux (For more information, see http://hplipopensource.com/hplip-web/index.html)
But then also on the HP site they have drivers for the printer for 10.8. See here http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4142&lc=en&cc=us&dlc=en&s w_lang=&product=4323659#N194
I would try the driver from HP. -
Does anyone know why Lion does not support the HP LaserJet CP1025nw and if there is a work around?
Does anyone know why Lion does not support the HP LaserJet CP1025nw and if there is a work around while we wait for a dedicated driver? HP claims apple provides the drivers but I am not certain of this.
See the following link for details from the hp.com site on using your model of printer with Lion along with a number of other FAQs :
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02915680&cc=uk&dlc=en&lc=en &os=219&product=4052972&sw_lang=
Thanks
AF -
I found out after the install of LION, that it does not support Rosetta, which runs Quicken and the classic AOL software and a myriad of other apps.
Can I go back to Snow Leopard? Is there a way to retrieve my thousands of saved E mails, which are saved on my Mac?
I still see the filing cabinet with my screen name but cannot get them to open.
Please help! Lion may roar, but the fact it does not support apps like quicken means it purrs.I had the Apple store wiped out my hard drive and I restore my last hard drive downloard by first placing Snow leopard DVD in the DVD drive and holding "C" when turning on the machine then I follow the instructions. I am back on snow leopard and trying out two finance software to replace Quicken for mac 2007. I am trialing Quicken essentials and ibank. They are both compatable with LION. So when I am ready will download Lion again. Also, Micorsoft Office needs to be 2011 version for it to work on Lion
-
want to use icloud on my macbook and cant because I am using OSX10.6.8 - I want to upgrade this but I cant upgrade to mountain lion as my mac does not support this - cannot find a way to go to Version 10.7.4 which i understand supports icloud - help to do this please
If you purchased Lion for your iMac, just log into the Mac App Store from your MacBook using the Apple ID under which you purchased Lion and go to the Purchases page. You will be able to download and install Lion there.
searching the internet i found a link to upgrtade to 10.7
The only place you get get Lion is from the Mac App Store. If you found some other site, that was an illegal copy and almost certainly tied to someone else's Apple ID and hence unusable by you. If the link was just to the Mac App Store, see above.
As to the problem with synchronization to iCloud, that's not a 10.6 question, so I'd suggest you take up that specific issue in either the Lion or iCloud forums, providing full details, and someone there can probably help you sort things out.
Regards. -
Since updating OS to Mountain Lion from leopard, I get the following error message when trying to backup with time machine on external drive. "Could not complete backup to media share. The network backup disk does not support the required AFP features." What are AFP features and how do I get Time Machine to backup to my current external backup?
This means that your NAS does not support the required encryption. Update your NAS to the latest firmware or ditch it and buy a Time Capsule (they are the most reliable when using TM).
-
I run a studio here in Atlanta. YEster day morning I called an Apple store to see if I could buy a copy of Mavericks. They forwarded me to Apple Care. Apple Care tech and myself could not find Mavericks anywhere on the app store. Avid does not support Yosemiteam yet, so I had no other choice but to purchase Mountain Lion. It has been over 24 hours waI ting on Apple to "ship" / email me a code to download from the app store. I read a lot of horror stories from when they rolled out Mountain Lion in 2012 about it taking 72 hours to receive the codes. I hope that maybe it doesn't take that l9ng this time because I am losing money by the minute. Microsoft would have had a code to me in minutes. This is just crazy. I have used Apple products for years, but this is very disappointing. Anyone else ordered Mountain Lion recently? How long dI'd it take Apple to "ship" you your code via email? Thanks
From what I've read on these forums over the past few months, it hasn't gotten any better. An electronic order from any company shouldn't take more than 12 hours for a system to respond to, but people have been waiting up to a week for their redemption code email to arrive. It makes no sense to me why it would take that long.
-
Hi,
I purchased Huawei Dongle and trying to connect with my new MacBook Pro (OS- Mountain Lion) USB port 3.0 but unfortunately it does not support.
When I plugged in my macbook the power is flowing in dongle due green light blinking twice in every 3 sec but no connection found or diver shown.
Please let me know how I have to use it. I got some suggestion for USB hub 2.0 but It does not make any sense and driver installation.
So please suggest proper direction to use it and provide link to install any driver.
Thanks
Tauheed AhmadYes Clinton I did same, but they were (Huawei customer support) surprised about this problem, They behave like they have no idea about USB 2.0 and 3.0 knowledge. They handsUp that reason I posted my problem in this forum.
So is there any better solution to use any mediator between these USB version handling, Please let me know.
Thanks
Tauheed -
The files are on a volume that does not support Trash- Mountain Lion CC-Lr5
I'm trying to delete files in Lr5-CC and I'm running Mountain Lion My files are on an external portable HD. I'm getting a message that says: "The files are on a volume that does not support Trash." Does anyone know why this happens and how to fix it? Thank you
Hello,
This reply is months late, but hopefully it'll help you or someone else searching with this problem. I was having the same problem and found a way to get rid of it (permanently, it seems so far). The diagram below shows the steps I took in detail.
Note: This seems to especially be a problem if your photo files on the same disk as a Mac OS installation or bootable backup.
Hope this helps: -
Have loaded lion and now can't access office for mac or apple works as it says it does not support power pc applications, how can I acces them or better still reinstate them please?
MS-Office for Mac versions 2004 and older do not run in Lion since these are PPC-apps for which Apple has dropped support.
Free alternatives to open Word and Excel files:
NeoOffice http://www.neooffice.org/neojava/en/index.php
OpenOffice http://www.openoffice.org/
Or get the 2011 MS-Office -
Recently got new iMac with Lion.....when I try to load my LogicPro software, I get 'OS does not support power PC'. Is there a download to fix or must I spend another 500 on software?
What version of Logic do you have?
And if you end up upgrading, it's only $199 now. -
In macbook pro with lion os apple gives a full-screen-mode icon in the top right corner of the window, which will be used to open that view in different window. But firefox does not support this. Even chrome supports it.
When will you bring this feature to firefox?. Currently I am in firefox 8.0.1No answers, but Mozilla is aware of the new release of Lion, and hopefully are working on solving some of the known issues. There are some rather formal technical discussions and reports, as mentioned in this contributors thread: [/forums/contributors/707160]
Maybe you are looking for
-
S.O.S. - I have a problem reading an XML to save it in a database
I have a problem reading an XML I trying to save the data in a database. In a log cuardo the message as text and is correct, but I do not type in the database Glassfish give me this error in the log: HTTPBC-E01052: The value set on the org.glassfish.
-
Changing look and feel with radio buttons
k this is the code that i have so far, Yes i read the tutorial and stuff but it doesnt seem to make any sense and all. tell me what else i need in this code to do what i want, its the action performed part i didnt put the other code, what else do i n
-
Install issue with Poweredge 2450
I'm trying to install Solaris 8 on an Dell Poweredge 2450 but the Solaris install drivers are having problems reading my 2 SCSI drives. It just lists my Cdrom and my 2 network cards when it asks me where I want to boot from. I tried to add an old CAD
-
Einzelne Fenster anstelle Tabs in Photoshop CC 2014
Hallo zusammen. Ich bin Umsteiger von CS2 auf CC2014. Mich stört nun eine Kleinigkeit im Photoshop. Im PS CS2 wurde ja jedes Bild in einem einzelnen Fenster dargestellt. In PS CC2014 werden diese nun aber in Tabs dargestellt. Gibt es eine Möglichkeit
-
Hello! Yesterday i bought Phase, i put some songs in the phase playlist and everything worked fine. But today i tried to put some more songs in the Phase playlist, but i couldent. What should i do? The "Games" meny under "LIBARY" to left has also dis