Lexmark Printer S405

I've spent 5 hours with Lexmark to no avail! In the end, I am told that this is a known problem with 10.6.7. My problem is this: I am connected to wireless network. Printer indicates it is "ready" but when I print, I receive message: Computer cannot communicate with Printer. Reading other posts, I have uninstalled, installed, started from scratch, downloaded driver from Lexmark site.
Still have problem. When I am in: Printers/Lexmark/Drivers, no drivers appear. What is the fix to this issue. Any and all suggestions welcome.
Thank you

I just noticed this problem as well.  The new 2.0 drivers for Lexmark were working great and today I tried to scan and got the connection error.  I haven't tried using this printer since the 10.6.7 update.  I have uninstalled and reinstalled the drivers to no avail.  Unfortunately I have had ongoing issues with printing ever since Snow Leopard and this seems par for the course.  I think we will have to wait for Lexmark to update their drivers.

Similar Messages

  • How can I print a doc from my iPhone 4S to a Lexmark Interpret S405 printer with WiFi? Thanks!

    How can I print a doc from my iPhone 4S to a Lexmark Interpret S405 printer with WiFi? Thanks!

    Unfortunately you need an airprint enabled printer to print from an iOS device. There are some work arounds but they are very complicated and aren't proven to work 100%. From what I understand through rumors they are working on allowing all wireless printers to work with iOS but at the moment that's a pipedream. I don't know how important it is but if you really need to print from iPhone you can find some great AirPrint printers on Ebay for decent prices. Good Luck!

  • Can you print to a lexmark interpret s405 from an ipad

    Can you print from an ipad to a Lexmark Interpret S405?

    iOS devices print using the AirPrint protocol. Your printer must support AirPrint. Check the list to see if your printer is shown to support AirPrint. Just because the printer is a Wi-Fi printer does not mean it supports AirPrint.

  • Lexmark Printer does not support Lion OS X 10.7.1

    I've just recently perchased both a MacBook Pro with lion 10.7.1, along with a Lexmark interpret s405 printer. When I went to install the printer it said that my version of OS X was not supported, even after I installed a printer driver update for 10.7. There is no update that I know of available for 10.7.1. Is there anything that I can possibly do to solve this issue?

    You've tried here:
    http://support.lexmark.com/index?locale=en&page=product&productCode=LEXMARK_INTE RPRET_S405&segment=SUPPORT&userlocale=EN_US&frompage=null#2

  • How do I install a Lexmark interpret s405

    How do I install a Lexmark interpret s405 on my ipad air?

    The iPad requires an AirPrint capable printer. Even though your printer is a Wi-Fi printer, it's not specifically AirPrint capable. The compatible printers list is here:
    http://support.apple.com/kb/ht4356

  • I am trying to print from my iphone to my LEXMARK printer. When I select the select printer option when trying to set it up, it does not find my printer??? i dont know what to do at this point. Maybe it does not have the capability? it is a year old???

    Hello!  I am trying to print from my iphone 4 to my LEXMARK printer. When trying to select my printer in my phone it comes up and says that there are no printers available... I dont know what to do at this point. Can someone PLEASE HELP???
    I also cant get my music I have purchased, to become my ringtone???????
    Thank you so much,
    Michael

    What's the model number of your Lexmark printer?

  • How can I print an email from my ipad via my Lexmark printer?

    How can I print my emails from my ipad with my Lexmark printer?. I can print photos & web pages.

    Hi there Lindlylou!
    I have an article here that can explain a little more about the feature you are referencing, called AirPrint:
    AirPrint Basics
    http://support.apple.com/kb/HT4356
    That article will contain information about which printers are AirPrint compatible, as well as information about how to use AirPrint on your iPad. Thanks for using the Apple Support Communities. Have a good one!
    -Braden

  • Bought a new computer running windows 8.1 and it will not allow me to install all in one lexmark printer.

    I have this lexmark printer running on 3 other computer, windows 7 and windows xp, but in 8.1 I get a message saying incompatable. What is really going on? 

    Hi,
    You can also check the compability printers of Lexmark in following link:
    http://www.microsoft.com/en-us/windows/compatibility/CompatCenter/ProductViewerWithDefaultFilters?TempOsid=Windows%208.1&Locale=en-us&Architecture=X64&TextSearch=%2Blexmark%2Bprinter%2B&Type=Both&CurrentPage=0&TotalPages=1&ShowCriteria=0&SortCriteria=Relevance&Compatibility=Unknown&LastRequested=14
    If your printer is not compatible with Windows 8.1, you can try to install the driver in Windows 8.1 compatible mode, otherwise, you have to contact the manufacturer to ask for the update driver for Windows 8.1.
    Get your apps and devices working in Windows 8.1
    http://windows.microsoft.com/en-HK/windows-8/get-apps-devices-working‎
    Kate Li
    TechNet Community Support

  • I have an iMac(Intel) Desktop computer.  I cannot print anything as it is telling me that it is "offline" How do I start it working again?  My Lexmark Printer is in working order as I have just photocopied a document successfully.

    I have an iMac (Intel) Desktop computer.   It will not send a message to my Lexmark printer because it says  "offline".   My Lexmark printer is in working order as I have just successfully photocopied a document on it. 

    That message means that the computer cannot see the printer on its network.
    Is the printer directly connected to the computer with a USB cable, or is it a network printer (either wireless, or wired to the router with an Ethernet cable)?
    Matt

  • I can connect my lexmark printer by usb but not wireless

    i can connect my lexmark printer s400 series by usb but not wirelessly any thoughts please

    I'm having the same issue. On my MBP 15" OS 10.7.3 the Lexmark printer does not connect to WIFI. It works on the USB connection. In wifi however it will work on the Virtual Box Windows 7 partition.
    In my logic this means the printer is properly connected to the wifi (green indicator and working with Virtual Box and Windows 7) The MBP is properly connected to the wifi network as Virtual Box works in the Mac's environment. The printer is present in the System Preferences indicating it is Idle and does have a IP address.
    When I do send a document to the printer it just sits in the Que and in System Preferences the status goes to Busy. In the Que it also indicates it is busy until it tmes out and indicate that communication with the printer is a problem.
    Thanks for any suggestions.

  • Linking Macbook air to lexmark printer

    Can someone advise what I am doing wrong. Just bought macbook air and trying to link it to my lexmark printer x9575. Downloaded driver and works with usb connection but when I try to print worelessly, it does not connect to printer.  Printer is on network and prints fine with other computers in the network. Mac is fine , wifi and internet etc all working, so why are they not linking up?

    Hi there mernalmonster!
    I have a couple of articles that can help you troubleshoot this issue with printing from your MacBook Air. First, make sure you have set up the printer properly by taking a look at the steps in the following article:
    Mac Basics: Printing in OS X Mountain Lion & OS X Lion
    http://support.apple.com/kb/HT4670
    You may want to take special note of this line in the instructions as well:
    Tip: If you want a Windows PC to use a Mac printer share to print, install Bonjour Print Services for Windows.
    If you are still experiencing issues after double-checking your settings in the previous article, then you may need to reference this article about troubleshooting printing issues:
    Troubleshooting printer issues in OS X
    http://support.apple.com/kb/TS3147
    Thanks for coming to the Apple Support Communities!
    Regards,
    Braden

  • Lexmark Printer issues since downloading OS 10.6.8

    I have recently updated my Apple OS system to 10.6.8 and now my Lexmark x4650 wont print, although it will still scan any ideas how to resolve this issue?

    Try to delete the Lexmark print queue under Print and Fax and add a new one manually. Click on the link for the steps: http://bit.ly/Ojbyti
    If it doesn't work, uninstall the Lexmark driver and download an updated driver online at www.lexmark.com.

  • Lexmark printer not working with os 10.6.8

    I Have a mac laptop that i recently upgraded to os 10.6.8. I have a lexmark prospect se pro 208 printer that worked wirelessly before the update. I upgraded the lexmark drivers to match 10.6.8 but now it will not print wirelessly or when connected with a USB cable.  I tried the fix mentioned in roadhouse tech blog to replace CUPS with cups from 10.6.7 but same result. Can any one help me with this problem?
    many thanks.....rRobert

    Try to delete the Lexmark print queue under Print and Fax and add a new one manually. Click on the link for the steps: http://bit.ly/Ojbyti
    If it doesn't work, uninstall the Lexmark driver and download an updated driver online at www.lexmark.com.

  • Banner page Setting Lexmark Printer

    Having problem in Lexmark printer E232 prints a header banner page prior to actual print job. The printer is on my small house network. I want to turn off this feature. Is there setting that control this feature that I turn off.
    Thanks in advance for info in resolving this issue
    Michael

    Michael29 wrote:
    Hi John
    I am not familiar with CUPS setting, Is the IP address you listed a mean to access this file of setting? If so, I am not able to access this now at work which is a "Windows world"
    Thanks for the reply
    Michael
    Hi Michael,
    Sorry I did not explain this better. The URL that I gave is a your local CUPS page, and you can administer settings for all of your printers from that page. You need to be on the machine that has the printer attached in order to administer it. I am not sure if this suggestion will help, but it's worth a try.
    john

  • Where can I find Lexmark Print Drivers v 2.3.1?

    Does anyone know here I can find Lexmark Print Driver V 2.3.1. Since I upgraded to 10.6.8 can't print wireless.

    Why not check the manufacturer website if it's not on Software Update? 

Maybe you are looking for

  • Delete Spool in Smartform

    Hi Gurus I am using RSPO_R_RDELETE_SPOOLREQ to delete the spool after converting the spool from pdf and to email. I am having a dump at CALL 'RSPOARNS' ID 'ID' FIELD spoolid                   ID 'FORCE' FIELD 'X'                   ID 'RC'  FIELD rc.

  • How to make a US map with interactive buttons for every state ...

    I have a photoshop map of the unitedstates with the states seperated. what I would like to do is put this map in dreamweaver so that each state is a button....any ideas?

  • Can we rollback catcpu.sql using flashback database?

    Hello all, Can we use FLASHBACK DATABASE to roll back the changes made by the catcpu.sql/catpatch.sql used for upgradation/patching? [ I am aware that oracle provides rollback sql's but just curious. ] TIA, JJ

  • Install Std. Apps EUL Disco 4i

    Hi All, I've been trying to migrate the Std Oracle Apps EUL to discoverer... it runs for about 2 hours via MKS Toolkit - but gives the following type of errors, e.g.: '\discover\US\amsamsppsttslflo.eex:The import process did not import or modify any

  • Does JDeveloper deploy the data-sources.xml file?

    Hi, My project has a data-sources.xml file. When I deployed the project, JDeveloper created a .war file. The data-sources.xml file is not in the .war file. How will the application server pick up the data source if the xml file is not getting deploye